Skip to content

L
linux
Switch branch/tag
  1. 18 May, 2021 21 commits
  3. 17 May, 2021 3 commits
    • Kumar Kartikeya Dwivedi's avatar
      libbpf: Add selftests for TC-BPF management API · f18ba26d
      Kumar Kartikeya Dwivedi authored 
      This adds some basic tests for the low level bpf_tc_* API.
Signed-off-by: default avatarKumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: default avatarToke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210512103451.989420-4-memxor@gmail.com
      f18ba26d
    • Kumar Kartikeya Dwivedi's avatar
      libbpf: Add low level TC-BPF management API · 715c5ce4
      Kumar Kartikeya Dwivedi authored 
      This adds functions that wrap the netlink API used for adding, manipulating,
and removing traffic control filters.

The API summary:

A bpf_tc_hook represents a location where a TC-BPF filter can be attached.
This means that creating a hook leads to creation of the backing qdisc,
while destruction either removes all filters attached to a hook, or destroys
qdisc if requested explicitly (as discussed below).

The TC-BPF API functions operate on this bpf_tc_hook to attach, replace,
query, and detach tc filters. All functions return 0 on success, and a
negative error code on failure.

bpf_tc_hook_create - Create a hook
Parameters:
	@hook - Cannot be NULL, ifindex > 0, attach_point must be set to
		proper enum constant. Note that parent must be unset when
		attach_point is one of BPF_TC_INGRESS or BPF_TC_EGRESS. Note
		that as an exception BPF_TC_INGRESS|BPF_TC_EGRESS is also a
		valid value for attach_point.

		Returns -EOPNOTSUPP when hook has attach_point as BPF_TC_CUSTOM.

bpf_tc_hook_destroy - Destroy a hook
Parameters:
	@hook - Cannot be NULL. The behaviour depends on value of
		attach_point. If BPF_TC_INGRESS, all filters attached to
		the ingress hook will be detached. If BPF_TC_EGRESS, all
		filters attached to the egress hook will be detached. If
		BPF_TC_INGRESS|BPF_TC_EGRESS, the clsact qdisc will be
		deleted, also detaching all filters. As before, parent must
		be unset for these attach_points, and set for BPF_TC_CUSTOM.

		It is advised that if the qdisc is operated on by many programs,
		then the program at least check that there are no other existing
		filters before deleting the clsact qdisc. An example is shown
		below:

		DECLARE_LIBBPF_OPTS(bpf_tc_hook, .ifindex = if_nametoindex("lo"),
				    .attach_point = BPF_TC_INGRESS);
		/* set opts as NULL, as we're not really interested in
		 * getting any info for a particular filter, but just
	 	 * detecting its presence.
		 */
		r = bpf_tc_query(&hook, NULL);
		if (r == -ENOENT) {
			/* no filters */
			hook.attach_point = BPF_TC_INGRESS|BPF_TC_EGREESS;
			return bpf_tc_hook_destroy(&hook);
		} else {
			/* failed or r == 0, the latter means filters do exist */
			return r;
		}

		Note that there is a small race between checking for no
		filters and deleting the qdisc. This is currently unavoidable.

		Returns -EOPNOTSUPP when hook has attach_point as BPF_TC_CUSTOM.

bpf_tc_attach - Attach a filter to a hook
Parameters:
	@hook - Cannot be NULL. Represents the hook the filter will be
		attached to. Requirements for ifindex and attach_point are
		same as described in bpf_tc_hook_create, but BPF_TC_CUSTOM
		is also supported.  In that case, parent must be set to the
		handle where the filter will be attached (using BPF_TC_PARENT).
		E.g. to set parent to 1:16 like in tc command line, the
		equivalent would be BPF_TC_PARENT(1, 16).

	@opts - Cannot be NULL. The following opts are optional:
		* handle   - The handle of the filter
		* priority - The priority of the filter
			     Must be >= 0 and <= UINT16_MAX
		Note that when left unset, they will be auto-allocated by
		the kernel. The following opts must be set:
		* prog_fd - The fd of the loaded SCHED_CLS prog
		The following opts must be unset:
		* prog_id - The ID of the BPF prog
		The following opts are optional:
		* flags - Currently only BPF_TC_F_REPLACE is allowed. It
			  allows replacing an existing filter instead of
			  failing with -EEXIST.
		The following opts will be filled by bpf_tc_attach on a
		successful attach operation if they are unset:
		* handle   - The handle of the attached filter
		* priority - The priority of the attached filter
		* prog_id  - The ID of the attached SCHED_CLS prog
		This way, the user can know what the auto allocated values
		for optional opts like handle and priority are for the newly
		attached filter, if they were unset.

		Note that some other attributes are set to fixed default
		values listed below (this holds for all bpf_tc_* APIs):
		protocol as ETH_P_ALL, direct action mode, chain index of 0,
		and class ID of 0 (this can be set by writing to the
		skb->tc_classid field from the BPF program).

bpf_tc_detach
Parameters:
	@hook - Cannot be NULL. Represents the hook the filter will be
		detached from. Requirements are same as described above
		in bpf_tc_attach.

	@opts - Cannot be NULL. The following opts must be set:
		* handle, priority
		The following opts must be unset:
		* prog_fd, prog_id, flags

bpf_tc_query
Parameters:
	@hook - Cannot be NULL. Represents the hook where the filter lookup will
		be performed. Requirements are same as described above in
		bpf_tc_attach().

	@opts - Cannot be NULL. The following opts must be set:
		* handle, priority
		The following opts must be unset:
		* prog_fd, prog_id, flags
		The following fields will be filled by bpf_tc_query upon a
		successful lookup:
		* prog_id

Some usage examples (using BPF skeleton infrastructure):

BPF program (test_tc_bpf.c):

	#include <linux/bpf.h>
	#include <bpf/bpf_helpers.h>

	SEC("classifier")
	int cls(struct __sk_buff *skb)
	{
		return 0;
	}

Userspace loader:

	struct test_tc_bpf *skel = NULL;
	int fd, r;

	skel = test_tc_bpf__open_and_load();
	if (!skel)
		return -ENOMEM;

	fd = bpf_program__fd(skel->progs.cls);

	DECLARE_LIBBPF_OPTS(bpf_tc_hook, hook, .ifindex =
			    if_nametoindex("lo"), .attach_point =
			    BPF_TC_INGRESS);
	/* Create clsact qdisc */
	r = bpf_tc_hook_create(&hook);
	if (r < 0)
		goto end;

	DECLARE_LIBBPF_OPTS(bpf_tc_opts, opts, .prog_fd = fd);
	r = bpf_tc_attach(&hook, &opts);
	if (r < 0)
		goto end;
	/* Print the auto allocated handle and priority */
	printf("Handle=%u", opts.handle);
	printf("Priority=%u", opts.priority);

	opts.prog_fd = opts.prog_id = 0;
	bpf_tc_detach(&hook, &opts);
end:
	test_tc_bpf__destroy(skel);

This is equivalent to doing the following using tc command line:
  # tc qdisc add dev lo clsact
  # tc filter add dev lo ingress bpf obj foo.o sec classifier da
  # tc filter del dev lo ingress handle <h> prio <p> bpf
... where the handle and priority can be found using:
  # tc filter show dev lo ingress

Another example replacing a filter (extending prior example):

	/* We can also choose both (or one), let's try replacing an
	 * existing filter.
	 */
	DECLARE_LIBBPF_OPTS(bpf_tc_opts, replace_opts, .handle =
			    opts.handle, .priority = opts.priority,
			    .prog_fd = fd);
	r = bpf_tc_attach(&hook, &replace_opts);
	if (r == -EEXIST) {
		/* Expected, now use BPF_TC_F_REPLACE to replace it */
		replace_opts.flags = BPF_TC_F_REPLACE;
		return bpf_tc_attach(&hook, &replace_opts);
	} else if (r < 0) {
		return r;
	}
	/* There must be no existing filter with these
	 * attributes, so cleanup and return an error.
	 */
	replace_opts.prog_fd = replace_opts.prog_id = 0;
	bpf_tc_detach(&hook, &replace_opts);
	return -1;

To obtain info of a particular filter:

	/* Find info for filter with handle 1 and priority 50 */
	DECLARE_LIBBPF_OPTS(bpf_tc_opts, info_opts, .handle = 1,
			    .priority = 50);
	r = bpf_tc_query(&hook, &info_opts);
	if (r == -ENOENT)
		printf("Filter not found");
	else if (r < 0)
		return r;
	printf("Prog ID: %u", info_opts.prog_id);
	return 0;
Signed-off-by: default avatarKumar Kartikeya Dwivedi <memxor@gmail.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net> # libbpf API design
[ Daniel: also did major patch cleanup ]
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: default avatarToke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210512103451.989420-3-memxor@gmail.com
      715c5ce4
    • Kumar Kartikeya Dwivedi's avatar
      libbpf: Add various netlink helpers · 8bbb77b7
      Kumar Kartikeya Dwivedi authored 
      This change introduces a few helpers to wrap open coded attribute
preparation in netlink.c. It also adds a libbpf_netlink_send_recv() that
is useful to wrap send + recv handling in a generic way. Subsequent patch
will also use this function for sending and receiving a netlink response.
The libbpf_nl_get_link() helper has been removed instead, moving socket
creation into the newly named libbpf_netlink_send_recv().

Every nested attribute's closure must happen using the helper
nlattr_end_nested(), which sets its length properly. NLA_F_NESTED is
enforced using nlattr_begin_nested() helper. Other simple attributes
can be added directly.

The maxsz parameter corresponds to the size of the request structure
which is being filled in, so for instance with req being:

  struct {
	struct nlmsghdr nh;
	struct tcmsg t;
	char buf[4096];
  } req;

Then, maxsz should be sizeof(req).

This change also converts the open coded attribute preparation with these
helpers. Note that the only failure the internal call to nlattr_add()
could result in the nested helper would be -EMSGSIZE, hence that is what
we return to our caller.

The libbpf_netlink_send_recv() call takes care of opening the socket,
sending the netlink message, receiving the response, potentially invoking
callbacks, and return errors if any, and then finally close the socket.
This allows users to avoid identical socket setup code in different places.
The only user of libbpf_nl_get_link() has been converted to make use of it.
__bpf_set_link_xdp_fd_replace() has also been refactored to use it.
Signed-off-by: default avatarKumar Kartikeya Dwivedi <memxor@gmail.com>
[ Daniel: major patch cleanup ]
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: default avatarToke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210512103451.989420-2-memxor@gmail.com
      8bbb77b7
  5. 14 May, 2021 3 commits
  7. 12 May, 2021 2 commits
  9. 11 May, 2021 6 commits
  11. 10 May, 2021 4 commits
  13. 08 May, 2021 1 commit
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7