- 02 Oct, 2018 40 commits
-
-
Chintan Pandya authored
BugLink: https://bugs.launchpad.net/bugs/1792310 commit 785a19f9 upstream. The following kernel panic was observed on ARM64 platform due to a stale TLB entry. 1. ioremap with 4K size, a valid pte page table is set. 2. iounmap it, its pte entry is set to 0. 3. ioremap the same address with 2M size, update its pmd entry with a new value. 4. CPU may hit an exception because the old pmd entry is still in TLB, which leads to a kernel panic. Commit b6bdb751 ("mm/vmalloc: add interfaces to free unmapped page table") has addressed this panic by falling to pte mappings in the above case on ARM64. To support pmd mappings in all cases, TLB purge needs to be performed in this case on ARM64. Add a new arg, 'addr', to pud_free_pmd_page() and pmd_free_pte_page() so that TLB purge can be added later in seprate patches. [toshi.kani@hpe.com: merge changes, rewrite patch description] Fixes: 28ee90fe ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by:
Chintan Pandya <cpandya@codeaurora.org> Signed-off-by:
Toshi Kani <toshi.kani@hpe.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180627141348.21777-3-toshi.kani@hpe.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Mark Salyzyn authored
BugLink: https://bugs.launchpad.net/bugs/1792310 commit 7992c188 upstream. CVE-2018-9363 The buffer length is unsigned at all layers, but gets cast to int and checked in hidp_process_report and can lead to a buffer overflow. Switch len parameter to unsigned int to resolve issue. This affects 3.18 and newer kernels. Signed-off-by:
Mark Salyzyn <salyzyn@android.com> Fixes: a4b1b587 ("HID: Bluetooth: hidp: make sure input buffers are big enough") Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Kees Cook <keescook@chromium.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: linux-bluetooth@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: security@kernel.org Cc: kernel-team@android.com Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Thierry Escande authored
BugLink: https://bugs.launchpad.net/bugs/1792310 commit 3bbda5a3 upstream. If the ts3a227e audio accessory detection hardware is present and its driver probed, the jack needs to be created before enabling jack detection in the ts3a227e driver. With this patch, the jack is instantiated in the max98090 headset init function if the ts3a227e is present. This fixes a null pointer dereference as the jack detection enabling function in the ts3a driver was called before the jack is created. [minor correction to keep error handling on jack creation the same as before by Pierre Bossart] Signed-off-by:
Thierry Escande <thierry.escande@collabora.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-By:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1792310 commit 318abdfb upstream. Like the skcipher_walk and blkcipher_walk cases: scatterwalk_done() is only meant to be called after a nonzero number of bytes have been processed, since scatterwalk_pagedone() will flush the dcache of the *previous* page. But in the error case of ablkcipher_walk_done(), e.g. if the input wasn't an integer number of blocks, scatterwalk_done() was actually called after advancing 0 bytes. This caused a crash ("BUG: unable to handle kernel paging request") during '!PageSlab(page)' on architectures like arm and arm64 that define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE, provided that the input was page-aligned as in that case walk->offset == 0. Fix it by reorganizing ablkcipher_walk_done() to skip the scatterwalk_advance() and scatterwalk_done() if an error has occurred. Reported-by:
Liu Chao <liuchao741@huawei.com> Fixes: bf06099d ("crypto: skcipher - Add ablkcipher_walk interfaces") Cc: <stable@vger.kernel.org> # v2.6.35+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1792310 commit 0868def3 upstream. Like the skcipher_walk case: scatterwalk_done() is only meant to be called after a nonzero number of bytes have been processed, since scatterwalk_pagedone() will flush the dcache of the *previous* page. But in the error case of blkcipher_walk_done(), e.g. if the input wasn't an integer number of blocks, scatterwalk_done() was actually called after advancing 0 bytes. This caused a crash ("BUG: unable to handle kernel paging request") during '!PageSlab(page)' on architectures like arm and arm64 that define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE, provided that the input was page-aligned as in that case walk->offset == 0. Fix it by reorganizing blkcipher_walk_done() to skip the scatterwalk_advance() and scatterwalk_done() if an error has occurred. This bug was found by syzkaller fuzzing. Reproducer, assuming ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE: #include <linux/if_alg.h> #include <sys/socket.h> #include <unistd.h> int main() { struct sockaddr_alg addr = { .salg_type = "skcipher", .salg_name = "ecb(aes-generic)", }; char buffer[4096] __attribute__((aligned(4096))) = { 0 }; int fd; fd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(fd, (void *)&addr, sizeof(addr)); setsockopt(fd, SOL_ALG, ALG_SET_KEY, buffer, 16); fd = accept(fd, NULL, NULL); write(fd, buffer, 15); read(fd, buffer, 15); } Reported-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1792310 commit bb296481 upstream. syzbot reported a crash in vmac_final() when multiple threads concurrently use the same "vmac(aes)" transform through AF_ALG. The bug is pretty fundamental: the VMAC template doesn't separate per-request state from per-tfm (per-key) state like the other hash algorithms do, but rather stores it all in the tfm context. That's wrong. Also, vmac_final() incorrectly zeroes most of the state including the derived keys and cached pseudorandom pad. Therefore, only the first VMAC invocation with a given key calculates the correct digest. Fix these bugs by splitting the per-tfm state from the per-request state and using the proper init/update/final sequencing for requests. Reproducer for the crash: #include <linux/if_alg.h> #include <sys/socket.h> #include <unistd.h> int main() { int fd; struct sockaddr_alg addr = { .salg_type = "hash", .salg_name = "vmac(aes)", }; char buf[256] = { 0 }; fd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(fd, (void *)&addr, sizeof(addr)); setsockopt(fd, SOL_ALG, ALG_SET_KEY, buf, 16); fork(); fd = accept(fd, NULL, NULL); for (;;) write(fd, buf, 256); } The immediate cause of the crash is that vmac_ctx_t.partial_size exceeds VMAC_NHBYTES, causing vmac_final() to memset() a negative length. Reported-by: syzbot+264bca3a6e8d645550d3@syzkaller.appspotmail.com Fixes: f1939f7c ("crypto: vmac - New hash algorithm for intel_txt support") Cc: <stable@vger.kernel.org> # v2.6.32+ Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1792310 commit 73bf20ef upstream. The VMAC template assumes the block cipher has a 128-bit block size, but it failed to check for that. Thus it was possible to instantiate it using a 64-bit block size cipher, e.g. "vmac(cast5)", causing uninitialized memory to be used. Add the needed check when instantiating the template. Fixes: f1939f7c ("crypto: vmac - New hash algorithm for intel_txt support") Cc: <stable@vger.kernel.org> # v2.6.32+ Signed-off-by:
-
Randy Dunlap authored
BugLink: https://bugs.launchpad.net/bugs/1792310 commit 934193a6 upstream. Verify that 'depmod' ($DEPMOD) is installed. This is a partial revert of commit 620c231c ("kbuild: do not check for ancient modutils tools"). Also update Documentation/process/changes.rst to refer to kmod instead of module-init-tools. Fixes kernel bugzilla #198965: https://bugzilla.kernel.org/show_bug.cgi?id=198965Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Jessica Yu <jeyu@kernel.org> Cc: Chih-Wei Huang <cwhuang@linux.org.tw> Cc: stable@vger.kernel.org # any kernel since 2012 Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Liwei Song authored
BugLink: https://bugs.launchpad.net/bugs/1792310 commit 17e83549 upstream. Fix the following kernel bug: kernel BUG at drivers/iommu/intel-iommu.c:3260! invalid opcode: 0000 [#5] PREEMPT SMP Hardware name: Intel Corp. Harcuvar/Server, BIOS HAVLCRB0.X64.0013.D39.1608311820 08/31/2016 task: ffff880175389950 ti: ffff880176bec000 task.ti: ffff880176bec000 RIP: 0010:[<ffffffff8150a83b>] [<ffffffff8150a83b>] intel_unmap+0x25b/0x260 RSP: 0018:ffff880176bef5e8 EFLAGS: 00010296 RAX: 0000000000000024 RBX: ffff8800773c7c88 RCX: 000000000000ce04 RDX: 0000000080000000 RSI: 0000000000000000 RDI: 0000000000000009 RBP: ffff880176bef638 R08: 0000000000000010 R09: 0000000000000004 R10: ffff880175389c78 R11: 0000000000000a4f R12: ffff8800773c7868 R13: 00000000ffffac88 R14: ffff8800773c7818 R15: 0000000000000001 FS: 00007fef21258700(0000) GS:ffff88017b5c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000066d6d8 CR3: 000000007118c000 CR4: 00000000003406e0 Stack: 00000000ffffac88 ffffffff8199867f ffff880176bef5f8 ffff880100000030 ffff880176bef668 ffff8800773c7c88 ffff880178288098 ffff8800772c0010 ffff8800773c7818 0000000000000001 ffff880176bef648 ffffffff8150a86e Call Trace: [<ffffffff8199867f>] ? printk+0x46/0x48 [<ffffffff8150a86e>] intel_unmap_page+0xe/0x10 [<ffffffffa039d99b>] ismt_access+0x27b/0x8fa [i2c_ismt] [<ffffffff81554420>] ? __pm_runtime_suspend+0xa0/0xa0 [<ffffffff815544a0>] ? pm_suspend_timer_fn+0x80/0x80 [<ffffffff81554420>] ? __pm_runtime_suspend+0xa0/0xa0 [<ffffffff815544a0>] ? pm_suspend_timer_fn+0x80/0x80 [<ffffffff8143dfd0>] ? pci_bus_read_dev_vendor_id+0xf0/0xf0 [<ffffffff8172b36c>] i2c_smbus_xfer+0xec/0x4b0 [<ffffffff810aa4d5>] ? vprintk_emit+0x345/0x530 [<ffffffffa038936b>] i2cdev_ioctl_smbus+0x12b/0x240 [i2c_dev] [<ffffffff810aa829>] ? vprintk_default+0x29/0x40 [<ffffffffa0389b33>] i2cdev_ioctl+0x63/0x1ec [i2c_dev] [<ffffffff811b04c8>] do_vfs_ioctl+0x328/0x5d0 [<ffffffff8119d8ec>] ? vfs_write+0x11c/0x190 [<ffffffff8109d449>] ? rt_up_read+0x19/0x20 [<ffffffff811b07f1>] SyS_ioctl+0x81/0xa0 [<ffffffff819a351b>] system_call_fastpath+0x16/0x6e This happen When run "i2cdetect -y 0" detect SMBus iSMT adapter. After finished I2C block read/write, when unmap the data buffer, a wrong device address was pass to dma_unmap_single(). To fix this, give dma_unmap_single() the "dev" parameter, just like what dma_map_single() does, then unmap can find the right devices. Fixes: 13f35ac1 ("i2c: Adding support for Intel iSMT SMBus 2.0 host controller") Signed-off-by:
Liwei Song <liwei.song@windriver.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Andrey Konovalov authored
BugLink: https://bugs.launchpad.net/bugs/1792310 commit 0e410e15 upstream. With KASAN enabled the kernel has two different memset() functions, one with KASAN checks (memset) and one without (__memset). KASAN uses some macro tricks to use the proper version where required. For example memset() calls in mm/slub.c are without KASAN checks, since they operate on poisoned slab object metadata. The issue is that clang emits memset() calls even when there is no memset() in the source code. They get linked with improper memset() implementation and the kernel fails to boot due to a huge amount of KASAN reports during early boot stages. The solution is to add -fno-builtin flag for files with KASAN_SANITIZE := n marker. Link: http://lkml.kernel.org/r/8ffecfffe04088c52c42b92739c2bd8a0bcb3f5e.1516384594.git.andreyknvl@google.comSigned-off-by:
Andrey Konovalov <andreyknvl@google.com> Acked-by:
Nick Desaulniers <ndesaulniers@google.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [ Nick : Backported to 4.4 avoiding KUBSAN ] Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1792310 The 4.4.y stable backport dc6ae4df for the upstream commit 3d4bf93a ("tcp: detect malicious patterns in tcp_collapse_ofo_queue()") missed a line that enlarges the range_truesize value, which broke the whole check. Fixes: dc6ae4df ("tcp: detect malicious patterns in tcp_collapse_ofo_queue()") Signed-off-by:
Takashi Iwai <tiwai@suse.de> Cc: Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Toshi Kani authored
BugLink: https://bugs.launchpad.net/bugs/1792310 commit f967db0b upstream. ioremap() supports pmd mappings on x86-PAE. However, kernel's pmd tables are not shared among processes on x86-PAE. Therefore, any update to sync'd pmd entries need re-syncing. Freeing a pte page also leads to a vmalloc fault and hits the BUG_ON in vmalloc_sync_one(). Disable free page handling on x86-PAE. pud_free_pmd_page() and pmd_free_pte_page() simply return 0 if a given pud/pmd entry is present. This assures that ioremap() does not update sync'd pmd entries at the cost of falling back to pte mappings. Fixes: 28ee90fe ("x86/mm: implement free pmd/pte page interfaces") Reported-by:
Joerg Roedel <joro@8bytes.org> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1792174Signed-off-by:
-
Vlastimil Babka authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 792adb90 upstream. The introduction of generic_max_swapfile_size and arch-specific versions has broken linking on x86 with CONFIG_SWAP=n due to undefined reference to 'generic_max_swapfile_size'. Fix it by compiling the x86-specific max_swapfile_size() only with CONFIG_SWAP=y. Reported-by:
Tomas Pruzina <pruzinat@gmail.com> Fixes: 377eeaa8 ("x86/speculation/l1tf: Limit swap file size to MAX_PA/2") Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: stable@vger.kernel.org Signed-off-by:
-
Andi Kleen authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 1063711b upstream The mmio tracer sets io mapping PTEs and PMDs to non present when enabled without inverting the address bits, which makes the PTE entry vulnerable for L1TF. Make it use the right low level macros to actually invert the address bits to protect against L1TF. In principle this could be avoided because MMIO tracing is not likely to be enabled on production machines, but the fix is straigt forward and for consistency sake it's better to get rid of the open coded PTE manipulation. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Dan Williams authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 87744ab3 upstream vm_insert_mixed() unlike vm_insert_pfn_prot() and vmf_insert_pfn_pmd(), fails to check the pgprot_t it uses for the mapping against the one recorded in the memtype tracking tree. Add the missing call to track_pfn_insert() to preclude cases where incompatible aliased mappings are established for a given physical address range. [groeck: Backport to v4.4.y] Link: http://lkml.kernel.org/r/147328717909.35069.14256589123570653697.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
Dan Williams <dan.j.williams@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by:
-
Andy Lutomirski authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 1745cbc5 upstream The x86 vvar vma contains pages with differing cacheability flags. x86 currently implements this by manually inserting all the ptes using (io_)remap_pfn_range when the vma is set up. x86 wants to move to using .fault with VM_FAULT_NOPAGE to set up the mappings as needed. The correct API to use to insert a pfn in .fault is vm_insert_pfn(), but vm_insert_pfn() can't override the vma's cache mode, and the HPET page in particular needs to be uncached despite the fact that the rest of the VMA is cached. Add vm_insert_pfn_prot() to support varying cacheability within the same non-COW VMA in a more sane manner. x86 could alternatively use multiple VMAs, but that's messy, would break CRIU, and would create unnecessary VMAs that would waste memory. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Reviewed-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Stefan Bader authored
BugLink: https://bugs.launchpad.net/bugs/1792174 This brings arch/x86/include/asm/pgtable.h in sync with upstream stable (4.4.155 in this case because 4.4.148 still seems to miss some fixup). Effectively this replaces the open coded version of pud_mkhuge() we were using by one using pud_set_flags()- And also adds pud_set/clear_flags(). I did not make the change in pfn_pud: - phys_addr_t pfn = (phys_addr_t)page_nr << PAGE_SHIFT; + phys_addr_t pfn = page_nr << PAGE_SHIFT; Maybe the conversion is not necessary but it should not hurt either. The remaining changes are only whitespace/linebreak ones. Signed-off-by:
-
Stefan Bader authored
BugLink: https://bugs.launchpad.net/bugs/1792174 Adjusts formatting (no code change) to match current upstream stable 4.4.148. Signed-off-by:
-
Naoya Horiguchi authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit eee4818b upstream _PAGE_PSE is used to distinguish between a truly non-present (_PAGE_PRESENT=0) PMD, and a PMD which is undergoing a THP split and should be treated as present. But _PAGE_SWP_SOFT_DIRTY currently uses the _PAGE_PSE bit, which would cause confusion between one of those PMDs undergoing a THP split, and a soft-dirty PMD. Dropping _PAGE_PSE check in pmd_present() does not work well, because it can hurt optimization of tlb handling in thp split. Thus, we need to move the bit. In the current kernel, bits 1-4 are not used in non-present format since commit 00839ee3 ("x86/mm: Move swap offset/type up in PTE to work around erratum"). So let's move _PAGE_SWP_SOFT_DIRTY to bit 1. Bit 7 is used as reserved (always clear), so please don't use it for other purpose. [dwmw2: Pulled in to 4.9 backport to support L1TF changes] Link: http://lkml.kernel.org/r/20170717193955.20207-3-zi.yan@sent.comSigned-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
Zi Yan <zi.yan@cs.rutgers.edu> Acked-by:
Dave Hansen <dave.hansen@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by:
-
Stefan Bader authored
BugLink: https://bugs.launchpad.net/bugs/1792174 The delta was only in comments or blank lines. So this brings the file (arch/x86/include/asm/pgtable_64.h) into sync with 4.4.148. Signed-off-by:
-
Nick Desaulniers authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 208cbb32 upstream. It was reported that the commit d0a8d937 is causing users of gcc < 4.9 to observe -Werror=missing-prototypes errors. Indeed, it seems that: extern inline unsigned long native_save_fl(void) { return 0; } compiled with -Werror=missing-prototypes produces this warning in gcc < 4.9, but not gcc >= 4.9. Fixes: d0a8d937 ("x86/paravirt: Make native_save_fl() extern inline"). Reported-by:
David Laight <david.laight@aculab.com> Reported-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 0ea06330 upstream. Remove all %p uses in error messages in kprobes/x86. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Howells <dhowells@redhat.com> Cc: David S . Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jon Medhurst <tixy@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Tobin C . Harding <me@tobin.cc> Cc: Will Deacon <will.deacon@arm.com> Cc: acme@kernel.org Cc: akpm@linux-foundation.org Cc: brueckner@linux.vnet.ibm.com Cc: linux-arch@vger.kernel.org Cc: rostedt@goodmis.org Cc: schwidefsky@de.ibm.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/lkml/152491902310.9916.13355297638917767319.stgit@devboxSigned-off-by:
-
Oleksij Rempel authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 1bcfe056 upstream. Use the correct IRQ line for the MSI controller in the PCIe host controller. Apparently a different IRQ line is used compared to other i.MX6 variants. Without this change MSI IRQs aren't properly propagated to the upstream interrupt controller. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Lucas Stach <l.stach@pengutronix.de> Fixes: b1d17f68 ("ARM: dts: imx: add initial imx6sx device tree source") Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Michael Mera authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 062d0f22 upstream. In write to debugfs file 'resource_stats' the local buffer 'tmp_str' is written at index 'count-1' where 'count' is the size of the write, so potentially 0. This patch filters odd values for the write size/position to avoid this type of problem. Signed-off-by:
Michael Mera <dev@michaelmera.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Jack Morgenstein authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit d8f9cc32 upstream. To allow rereg_user_mr to modify the MR from read-only to writable without using get_user_pages again, we needed to define the initial MR as writable. However, this was originally done unconditionally, without taking into account the writability of the underlying virtual memory. As a result, any attempt to register a read-only MR over read-only virtual memory failed. To fix this, do not add the writable flag bit when the user virtual memory is not writable (e.g. const memory). However, when the underlying memory is NOT writable (and we therefore do not define the initial MR as writable), the IB core adds a "force writable" flag to its user-pages request. If this succeeds, the reg_user_mr caller gets a writable copy of the original pages. If the user-space caller then does a rereg_user_mr operation to enable writability, this will succeed. This should not be allowed, since the original virtual memory was not writable. Cc: <stable@vger.kernel.org> Fixes: 9376932d ("IB/mlx4_ib: Add support for user MR re-registration") Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Jack Morgenstein authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 08bb558a upstream. Make the MR writability flags check, which is performed in umem.c, a static inline function in file ib_verbs.h This allows the function to be used by low-level infiniband drivers. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Al Viro authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 119e1ef8 upstream. __legitimize_mnt() has two problems - one is that in case of success the check of mount_lock is not ordered wrt preceding increment of refcount, making it possible to have successful __legitimize_mnt() on one CPU just before the otherwise final mntpu() on another, with __legitimize_mnt() not seeing mntput() taking the lock and mntput() not seeing the increment done by __legitimize_mnt(). Solved by a pair of barriers. Another is that failure of __legitimize_mnt() on the second read_seqretry() leaves us with reference that'll need to be dropped by caller; however, if that races with final mntput() we can end up with caller dropping rcu_read_lock() and doing mntput() to release that reference - with the first mntput() having freed the damn thing just as rcu_read_lock() had been dropped. Solution: in "do mntput() yourself" failure case grab mount_lock, check if MNT_DOOMED has been set by racing final mntput() that has missed our increment and if it has - undo the increment and treat that as "failure, caller doesn't need to drop anything" case. It's not easy to hit - the final mntput() has to come right after the first read_seqretry() in __legitimize_mnt() *and* manage to miss the increment done by __legitimize_mnt() before the second read_seqretry() in there. The things that are almost impossible to hit on bare hardware are not impossible on SMP KVM, though... Reported-by:
Oleg Nesterov <oleg@redhat.com> Fixes: 48a066e7 ("RCU'd vsfmounts") Cc: stable@vger.kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 9ea0a46c upstream. mntput_no_expire() does the calculation of total refcount under mount_lock; unfortunately, the decrement (as well as all increments) are done outside of it, leading to false positives in the "are we dropping the last reference" test. Consider the following situation: * mnt is a lazy-umounted mount, kept alive by two opened files. One of those files gets closed. Total refcount of mnt is 2. On CPU 42 mntput(mnt) (called from __fput()) drops one reference, decrementing component * After it has looked at component #0, the process on CPU 0 does mntget(), incrementing component #0, gets preempted and gets to run again - on CPU 69. There it does mntput(), which drops the reference (component #69) and proceeds to spin on mount_lock. * On CPU 42 our first mntput() finishes counting. It observes the decrement of component #69, but not the increment of component #0. As the result, the total it gets is not 1 as it should've been - it's 0. At which point we decide that vfsmount needs to be killed and proceed to free it and shut the filesystem down. However, there's still another opened file on that filesystem, with reference to (now freed) vfsmount, etc. and we are screwed. It's not a wide race, but it can be reproduced with artificial slowdown of the mnt_get_count() loop, and it should be easier to hit on SMP KVM setups. Fix consists of moving the refcount decrement under mount_lock; the tricky part is that we want (and can) keep the fast case (i.e. mount that still has non-NULL ->mnt_ns) entirely out of mount_lock. All places that zero mnt->mnt_ns are dropping some reference to mnt and they call synchronize_rcu() before that mntput(). IOW, if mntput() observes (under rcu_read_lock()) a non-NULL ->mnt_ns, it is guaranteed that there is another reference yet to be dropped. Reported-by:
Jann Horn <jannh@google.com> Tested-by:
-
Al Viro authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 90bad5e0 upstream. Since mountpoint crossing can happen without leaving lazy mode, root dentries do need the same protection against having their memory freed without RCU delay as everything else in the tree. It's partially hidden by RCU delay between detaching from the mount tree and dropping the vfsmount reference, but the starting point of pathwalk can be on an already detached mount, in which case umount-caused RCU delay has already passed by the time the lazy pathwalk grabs rcu_read_lock(). If the starting point happens to be at the root of that vfsmount *and* that vfsmount covers the entire filesystem, we get trouble. Fixes: 48a066e7 ("RCU'd vsfmounts") Cc: stable@vger.kernel.org Signed-off-by:
-
Bart Van Assche authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 1214fd7b upstream. Surround scsi_execute() calls with scsi_autopm_get_device() and scsi_autopm_put_device(). Note: removing sr_mutex protection from the scsi_cd_get() and scsi_cd_put() calls is safe because the purpose of sr_mutex is to serialize cdrom_*() calls. This patch avoids that complaints similar to the following appear in the kernel log if runtime power management is enabled: INFO: task systemd-udevd:650 blocked for more than 120 seconds. Not tainted 4.18.0-rc7-dbg+ #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. systemd-udevd D28176 650 513 0x00000104 Call Trace: __schedule+0x444/0xfe0 schedule+0x4e/0xe0 schedule_preempt_disabled+0x18/0x30 __mutex_lock+0x41c/0xc70 mutex_lock_nested+0x1b/0x20 __blkdev_get+0x106/0x970 blkdev_get+0x22c/0x5a0 blkdev_open+0xe9/0x100 do_dentry_open.isra.19+0x33e/0x570 vfs_open+0x7c/0xd0 path_openat+0x6e3/0x1120 do_filp_open+0x11c/0x1c0 do_sys_open+0x208/0x2d0 __x64_sys_openat+0x59/0x70 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Maurizio Lombardi <mlombard@redhat.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: <stable@vger.kernel.org> Tested-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Hans de Goede authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit fdcb613d upstream. The LPSS PWM device on on Bay Trail and Cherry Trail devices has a set of private registers at offset 0x800, the current lpss_device_desc for them already sets the LPSS_SAVE_CTX flag to have these saved/restored over device-suspend, but the current lpss_device_desc was not setting the prv_offset field, leading to the regular device registers getting saved/restored instead. This is causing the PWM controller to no longer work, resulting in a black screen, after a suspend/resume on systems where the firmware clears the APB clock and reset bits at offset 0x804. This commit fixes this by properly setting prv_offset to 0x800 for the PWM devices. Cc: stable@vger.kernel.org Fixes: e1c74817 ("ACPI / LPSS: Add Intel BayTrail ACPI mode PWM") Fixes: 1bfbd8eb ("ACPI / LPSS: Add ACPI IDs for Intel Braswell") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Rafael J . Wysocki <rjw@rjwysocki.net> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Juergen Gross authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit d472b3a6 upstream. skb_shinfo() can change when calling __pskb_pull_tail(): Don't cache its return value. Cc: stable@vger.kernel.org Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
John David Anglin authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit fedb8da9 upstream. For years I thought all parisc machines executed loads and stores in order. However, Jeff Law recently indicated on gcc-patches that this is not correct. There are various degrees of out-of-order execution all the way back to the PA7xxx processor series (hit-under-miss). The PA8xxx series has full out-of-order execution for both integer operations, and loads and stores. This is described in the following article: http://web.archive.org/web/20040214092531/http://www.cpus.hp.com/technical_references/advperf.shtml For this reason, we need to define mb() and to insert a memory barrier before the store unlocking spinlocks. This ensures that all memory accesses are complete prior to unlocking. The ldcw instruction performs the same function on entry. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.0+ Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Helge Deller authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 66509a27 upstream. Enable the -mlong-calls compiler option by default, because otherwise in most cases linking the vmlinux binary fails due to truncations of R_PARISC_PCREL22F relocations. This fixes building the 64-bit defconfig. Cc: stable@vger.kernel.org # 4.0+ Signed-off-by:
-
Kees Cook authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit e01e8063 upstream. One of the classes of kernel stack content leaks[1] is exposing the contents of prior heap or stack contents when a new process stack is allocated. Normally, those stacks are not zeroed, and the old contents remain in place. In the face of stack content exposure flaws, those contents can leak to userspace. Fixing this will make the kernel no longer vulnerable to these flaws, as the stack will be wiped each time a stack is assigned to a new process. There's not a meaningful change in runtime performance; it almost looks like it provides a benefit. Performing back-to-back kernel builds before: Run times: 157.86 157.09 158.90 160.94 160.80 Mean: 159.12 Std Dev: 1.54 and after: Run times: 159.31 157.34 156.71 158.15 160.81 Mean: 158.46 Std Dev: 1.46 Instead of making this a build or runtime config, Andy Lutomirski recommended this just be enabled by default. [1] A noisy search for many kinds of stack content leaks can be seen here: https://cve.mitre.org/cgi-bin/cvekey.cgi?keyword=linux+kernel+stack+leak I did some more with perf and cycle counts on running 100,000 execs of /bin/true. before: Cycles: 218858861551 218853036130 214727610969 227656844122 224980542841 Mean: 221015379122.60 Std Dev: 4662486552.47 after: Cycles: 213868945060 213119275204 211820169456 224426673259 225489986348 Mean: 217745009865.40 Std Dev: 5935559279.99 It continues to look like it's faster, though the deviation is rather wide, but I'm not sure what I could do that would be less noisy. I'm open to ideas! Link: http://lkml.kernel.org/r/20180221021659.GA37073@beastSigned-off-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Srivatsa S. Bhat <srivatsa@csail.mit.edu> Reviewed-by:
Srinidhi Rao <srinidhir@vmware.com> Signed-off-by:
-
Thomas Egerer authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 32b6170c upstream. The ESP algorithms using CBC mode require echainiv. Hence INET*_ESP have to select CRYPTO_ECHAINIV in order to work properly. This solves the issues caused by a misconfiguration as described in [1]. The original approach, patching crypto/Kconfig was turned down by Herbert Xu [2]. [1] https://lists.strongswan.org/pipermail/users/2015-December/009074.html [2] http://marc.info/?l=linux-crypto-vger&m=145224655809562&w=2Signed-off-by:
Thomas Egerer <hakke_007@gmx.de> Acked-by:
-
Tadeusz Struk authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 3ab2011e upstream. There is a race condition in tpm_common_write function allowing two threads on the same /dev/tpm<N>, or two different applications on the same /dev/tpmrm<N> to overwrite each other commands/responses. Fixed this by taking the priv->buffer_mutex early in the function. Also converted the priv->data_pending from atomic to a regular size_t type. There is no need for it to be atomic since it is only touched under the protection of the priv->buffer_mutex. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Theodore Ts'o authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 50122847 upstream. Commit 8844618d: "ext4: only look at the bg_flags field if it is valid" will complain if block group zero does not have the EXT4_BG_INODE_ZEROED flag set. Unfortunately, this is not correct, since a freshly created file system has this flag cleared. It gets almost immediately after the file system is mounted read-write --- but the following somewhat unlikely sequence will end up triggering a false positive report of a corrupted file system: mkfs.ext4 /dev/vdc mount -o ro /dev/vdc /vdc mount -o remount,rw /dev/vdc Instead, when initializing the inode table for block group zero, test to make sure that itable_unused count is not too large, since that is the case that will result in some or all of the reserved inodes getting cleared. This fixes the failures reported by Eric Whiteney when running generic/230 and generic/231 in the the nojournal test case. Fixes: 8844618d ("ext4: only look at the bg_flags field if it is valid") Reported-by:
Eric Whitney <enwlinux@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1792109Signed-off-by:
-
