This patch adds support to 6 SLIMBus AFE ports, which are used as
backend dais.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds support to Q6AFE (Audio Front End) module on Q6DSP.

AFE module sits right at the other end of cpu where the codec/audio
devices are connected.

AFE provides abstraced interfaces to both hardware and virtual devices.
Each AFE tx/rx port can be configured to connect to one of the hardware
devices like codec, hdmi, slimbus, i2s and so on. AFE services include
starting, stopping, and if needed, any configurations of the ports.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Log the correct error code in case the .open() call to a component fails.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Currently the 'big-endian' property is listed as required, which is
not correct. i.MX SoCs do not need such property, so move it under
'Optional properties' entry instead.

Also, fsl-sai.txt incorrectly referenced 'FTM_PWM registers', so
change it to 'SAI registers', which is the intended description.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Trivial fix to spelling mistake in snprintf literal string
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

HID is assumed to be made of TI PCI ID (0x104C) + part number, so all
four 104C5121, 104C5122, 104C5141 104C5142 are valid.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

There is no platform code that uses i2c module table.
Remove it altogether and adjust ->probe() to be ->probe_new().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Make C-header and SPDX-License-Identifier header uniform.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Trivial fix to spelling mistakes in SND_SOC_BYTES literal strings
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Trivial fix to spelling mistake in SOC_ENUM literal string
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Removed invalid msg_type check.
This also fixes below static checker warning:
apr.c:95:35: warning: comparison is always true due to limited range of
 data type [-Wtype-limits]
warn: always true condition '(msg_type != 69864) => (0-u16max != 69864)'
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Set PR-38 register to 0x1fe1 will make PLL function more stable.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The ssm2305 is a simple Class-D audio amplifier. A application can
turn on/off the device by a gpio. It's also possible to hardwire the
shutdown pin.

Tested on a i.MX6 based custom board.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds support to core apr service, which is used to query
status of other static and dynamic services on the dsp.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Acked-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

These duplicate includes have been found with scripts/checkincludes.pl but
they have been removed manually to avoid removing false positives.
Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

As a side effect of the following commit, the active TX
serializer may get disabled which may result in distorted
audio output.

ASoC: davinci-mcasp: Add support for multichannel playback
(2952b27e)

For example, if a 4 channel I2S playback with two TX serializers
is activated. Later on, if a recording of 2 channels, with only 1 RX
serializer is started, which will also disable one of the TX
serializer because max_active_serializers is only calculated for
RX (recording) stream. This patch fixes this issue.
Signed-off-by: Vishal Thanki <vishalthanki@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Many X86 devices using a BYT SoC + RT5640 codec are cheap devices with
generic DMI strings, causing snd_soc_set_dmi_name() to fail to set a
long_name, making it impossible for userspace to have a correct UCM
profile which only uses inputs / outputs which are actually hooked up
on the device.

Our quirks already specify which input the internal mic is connected to
and if a single (mono) speaker is used or if the device has stereo
speakers.

This commit sets a long_name based on the quirks so that userspace can
have UCM profiles doing the right thing based on the long_name.

Note that if we ever encounter the need for a special UCM profile for
some device we can add a quirk to set a specific long_name for the
device,
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Even with our recently tweaked defaults, quite a few bytcr_rt5640 devices
still need quirks to be fully functional. This commits adds quirks where
necessary for the 16 bytcr_rt5640 devices I have access to.

The quirks are added for the following reasons:

1) Devices with only one speaker need the mono quirk to avoid driving an
unused and potentially short-circuited output. 8 of my sample of 16 devs
are mono, 4 of these would work with the defaults if it were not for their
mono speaker.

2) Devices using a different input for the internal mic then the default,
this is the case for 6 of my sample of 16 devices.

3) BYTCR devices without an ACPI channel map, which do not work with the
default of SSP0-AIF2, this is the case for 2 of my sample of 16 devices.

4) Devices which need non-default jack-detect settings, this is the case
for 6 of my sample of 16 devices.

This commit add quirks for the following devices:

Acer Iconia Tab 8 W1-810
Chuwi Vi8
HP Pavilion X2 10-n000nd
HP Stream 7
I.T. Works TW891
Lamina I8270
MSI S100
Pipo W4
PoV-mobii-800w (v2.0)
PoV-mobii-800w (v2.1)
Toshiba Click Mini L9W-B
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Use dmi_first_match() instead of dmi_check_system() + callbacks, this
avoid the need to initialize dmi_system_id.callback for each
byt_rt5640_quirk_table entry.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

As we add more quirks it is useful to have some sort of order in the
quirk list, sort it alphabetically.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Out of the 11 BYTCR devices which I have access to for testing, 6 use
JD1IN4P for jack-detect, 2 use JD1IN4P non-inverted and the other 3 use
JD2IN4N, the ones not using JD1IN4P are all also special in other ways and
need a DMI quirk regardless.

All 5 BYT (non CR) devices which I have access to use JD2IN4N.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Currently we've 2 places with BYTCR defaults: 1. The generic catch-all
DMI_SYS_VENDOR=="Insyde" DMI quirk which selects SSP0-AIF1 for generic
Insyde BYTCR tablets without the ACPI channel package; and 2. the
defaults in the if (is_bytcr) {} code block.

Currently these are not identical, both select IN3 as the internal mic
output, but the "Insyde" DMI quirk leaves out the DIFF_MIC quirk. The
DIFF_MIC quirk should be enabled by default, because enabling diff. input
helps a lot for devices with a differential mic, where as it is a nop on
devices with a normal mic.

This commit adds the DIFF_MIC quirk to the "Insyde" DMI quirk path, by
adding a new BYTCR_INPUT_DEFAULTS define and using that in both code paths
which set BYTCR defaults.

Having a single place where the BYTCR input defaults are defined also
allows defining jack-detect defaults in a single place in a follow-up
commit.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Out of the 11 BYTCR devices which I have access to for testing,
7 use IN3 for the internal mic and only 1 uses IN1 for the internal mic,
the other 3 use DMIC1.

So IN3 clearly is a better default, using IN3 as default avoids the need
to add DMI quirks for some of these devices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add code to support setting jack-detect parameters through quirks and
extend the existing DMI quirk table entries for the Asus T100TA and the
Dell Venue 8 Pro 5830 to enable jack detection.
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This fixes the following 3 issues:

1) The sys_vendor match should be for "Dell Inc." not "DellInc.",
   without this fixed the quirk never gets applied
2) DMIC1 is used not DMIC2, this was not a problem sofar because for
   regular BYT boards (rather then BYTCR) we default to DMIC1 and because
   of 1. the quirk was not being applied
3) The Dell Venue 8 5830 Pro only has a single speaker
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Use device-properties for setting up the dmic, based on the
BYT_RT5640_MAP() value, instead of using the codec specific
rt5640_dmic_enable() function for this.  This also removes the need
for the BYT_RT5640_DMIC_EN quirk, which was always set together with
a MAP() quirk of DMIC1_MAP or DMIC2_MAP.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Fixes: 9958e8afbcad ("ASoC: rt5663: Use the set_jack() instead of the export function")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The patch replaces the export function with the new API set_jack().
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The sdma-pcm does not need any information from omap-dma.h, it only needs
to include the omap-dmaengine.h - for the omap_dma_filter_fn, but that
might not be needed at all as OMAP1 was converted to dma_slave_map, but
I can not test OMAP1.

Add the linux/device.h include as well for devm_kzalloc()
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

WARNING: modpost: missing MODULE_LICENSE() in sound/soc/omap/snd-soc-sdma.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in sound/soc/omap/snd-soc-sdma.o
see include/linux/module.h for more information

Add the missing MODULE_LICENSE.

This patch also going to solve:
snd_soc_sdma: Unknown symbol devm_kmalloc (err 0)
snd_soc_sdma: Unknown symbol omap_dma_filter_fn (err 0)
snd_soc_sdma: Unknown symbol snd_dmaengine_pcm_prepare_slave_config (err 0)
snd_soc_sdma: Unknown symbol devm_snd_dmaengine_pcm_register (err 0)
Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Fix the compile error introduced by: "ASoC: Intel: bytcr_rt5640:
Configure PLL1 before using it".
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Trivial fix to spelling mistake in dev_err message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

There are only one set of ops on the compressed stream so no need to
reassign the copy callback repeatedly, stop after copy is seen to be
necessary.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds some common helper functions like translating dsp error
to linux error codes and channel mappings etc.

These functions are used in all the following qdsp6 drivers.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch add DT bindings for ASM (Audio Stream Manager) DSP module.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch add DT bindings for ADM (Audio Device Manager) DSP module.
This module implements mixer controls to setup the connections between
AFE ports and ASM streams.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch add DT bindings for AFE (Audio Frontend) DSP module.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch add DT bindings for Q6CORE DSP module.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds support to APR bus (Asynchronous Packet Router) driver.
APR driver is made as a bus driver so that the apr devices can added removed
more dynamically depending on the state of the services on the dsp.
APR is used for communication between application processor and QDSP to
use services on QDSP like Audio and others.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>