- 12 Nov, 2019 40 commits
-
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1852110 [ Upstream commit 3d1e5039 ] For some reason I missed the case of DCCP passive flows in my previous patch. Fixes: a904a069 ("inet: stop leaking jiffies on the wire") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Thiemo Nagel <tnagel@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Dave Wysochanski authored
BugLink: https://bugs.launchpad.net/bugs/1852110 [ Upstream commit d46b0da7 ] There's a deadlock that is possible and can easily be seen with a test where multiple readers open/read/close of the same file and a disruption occurs causing reconnect. The deadlock is due a reader thread inside cifs_strict_readv calling down_read and obtaining lock_sem, and then after reconnect inside cifs_reopen_file calling down_read a second time. If in between the two down_read calls, a down_write comes from another process, deadlock occurs. CPU0 CPU1 ---- ---- cifs_strict_readv() down_read(&cifsi->lock_sem); _cifsFileInfo_put OR cifs_new_fileinfo down_write(&cifsi->lock_sem); cifs_reopen_file() down_read(&cifsi->lock_sem); Fix the above by changing all down_write(lock_sem) calls to down_write_trylock(lock_sem)/msleep() loop, which in turn makes the second down_read call benign since it will never block behind the writer while holding lock_sem. Signed-off-by:
Dave Wysochanski <dwysocha@redhat.com> Suggested-by:
Ronnie Sahlberg <lsahlber@redhat.com> Reviewed--by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Jonas Gorski authored
BugLink: https://bugs.launchpad.net/bugs/1852110 [ Upstream commit e4f5cb1a ] The vectors span more than one byte, so mark them as arrays. Fixes the following build error when building when using GCC 8.3: In file included from ./include/linux/string.h:19, from ./include/linux/bitmap.h:9, from ./include/linux/cpumask.h:12, from ./arch/mips/include/asm/processor.h:15, from ./arch/mips/include/asm/thread_info.h:16, from ./include/linux/thread_info.h:38, from ./include/asm-generic/preempt.h:5, from ./arch/mips/include/generated/asm/preempt.h:1, from ./include/linux/preempt.h:81, from ./include/linux/spinlock.h:51, from ./include/linux/mmzone.h:8, from ./include/linux/bootmem.h:8, from arch/mips/bcm63xx/prom.c:10: arch/mips/bcm63xx/prom.c: In function 'prom_init': ./arch/mips/include/asm/string.h:162:11: error: '__builtin_memcpy' forming offset [2, 32] is out of the bounds [0, 1] of object 'bmips_smp_movevec' with type 'char' [-Werror=array-bounds] __ret = __builtin_memcpy((dst), (src), __len); \ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/mips/bcm63xx/prom.c:97:3: note: in expansion of macro 'memcpy' memcpy((void *)0xa0000200, &bmips_smp_movevec, 0x20); ^~~~~~ In file included from arch/mips/bcm63xx/prom.c:14: ./arch/mips/include/asm/bmips.h:80:13: note: 'bmips_smp_movevec' declared here extern char bmips_smp_movevec; Fixes: 18a1eef9 ("MIPS: BMIPS: Introduce bmips.h") Signed-off-by:
Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Paul Burton <paulburton@kernel.org> Cc: linux-mips@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Signed-off-by:
-
Navid Emamdoost authored
BugLink: https://bugs.launchpad.net/bugs/1852110 [ Upstream commit e13de8fe ] In unittest_data_add, a copy buffer is created via kmemdup. This buffer is leaked if of_fdt_unflatten_tree fails. The release for the unittest_data buffer is added. Fixes: b951f9dc ("Enabling OF selftest to run without machine's devicetree") Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by:
Frank Rowand <frowand.list@gmail.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Bodo Stroesser authored
BugLink: https://bugs.launchpad.net/bugs/1852110 [ Upstream commit 27e84243 ] passthrough_parse_cdb() - used by TCMU and PSCSI - attepts to reset the LUN field of SCSI-2 CDBs (bits 5,6,7 of byte 1). The current code is wrong as for newer commands not having the LUN field it overwrites relevant command bits (e.g. for SECURITY PROTOCOL IN / OUT). We think this code was unnecessary from the beginning or at least it is no longer useful. So we remove it entirely. Link: https://lore.kernel.org/r/12498eab-76fd-eaad-1316-c2827badb76a@ts.fujitsu.comSigned-off-by:
Bodo Stroesser <bstroesser@ts.fujitsu.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Yunfeng Ye authored
BugLink: https://bugs.launchpad.net/bugs/1852110 [ Upstream commit 1abecfca ] The memory @orig_flags is allocated by strdup(), it is freed on the normal path, but leak to free on the error path. Fix this by adding free(orig_flags) on the error path. Fixes: 0e111156 ("perf kmem: Print gfp flags in human readable string") Signed-off-by:
Yunfeng Ye <yeyunfeng@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Feilong Lin <linfeilong@huawei.com> Cc: Hu Shiyuan <hushiyuan@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/f9e9f458-96f3-4a97-a1d5-9feec2420e07@huawei.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Thomas Bogendoerfer authored
BugLink: https://bugs.launchpad.net/bugs/1852110 [ Upstream commit 8cbf0c17 ] When building a kernel with SCSI_SNI_53C710 enabled, Kconfig warns: WARNING: unmet direct dependencies detected for 53C700_LE_ON_BE Depends on [n]: SCSI_LOWLEVEL [=y] && SCSI [=y] && SCSI_LASI700 [=n] Selected by [y]: - SCSI_SNI_53C710 [=y] && SCSI_LOWLEVEL [=y] && SNI_RM [=y] && SCSI [=y] Add the missing depends SCSI_SNI_53C710 to 53C700_LE_ON_BE to fix it. Link: https://lore.kernel.org/r/20191009151128.32411-1-tbogendoerfer@suse.deSigned-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
-
Thomas Bogendoerfer authored
BugLink: https://bugs.launchpad.net/bugs/1852110 [ Upstream commit 0ee62114 ] Drop out memory dev_printk() with wrong device pointer argument. [mkp: typo] Link: https://lore.kernel.org/r/20191009151118.32350-1-tbogendoerfer@suse.deSigned-off-by:
-
Russell King authored
BugLink: https://bugs.launchpad.net/bugs/1852110 [ Upstream commit 67e15fa5 ] When the system has high memory pressure, the page containing the instruction may be paged out. Using probe_kernel_address() means that if the page is swapped out, the resulting page fault will not be handled because page faults are disabled by this function. Use get_user() to read the instruction instead. Reported-by:
Jing Xiangfeng <jingxiangfeng@huawei.com> Fixes: b255188f ("ARM: fix scheduling while atomic warning in alignment handling code") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Adam Ford authored
BugLink: https://bugs.launchpad.net/bugs/1852110 [ Upstream commit 6b512b0e ] The TWL4030 used on the Logit PD Torpedo SOM does not have the keypad pins routed. This patch disables the twl_keypad driver to remove some splat during boot: twl4030_keypad 48070000.i2c:twl@48:keypad: missing or malformed property linux,keymap: -22 twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -22 Signed-off-by:
Adam Ford <aford173@gmail.com> [tony@atomide.com: removed error time stamps] Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Robin Murphy authored
BugLink: https://bugs.launchpad.net/bugs/1852110 [ Upstream commit b1e620e7 ] If rockchip_pcm_platform_register() fails, e.g. upon deferring to wait for an absent DMA channel, we return without disabling RPM, which makes subsequent re-probe attempts scream with errors about the unbalanced enable. Don't do that. Fixes: ebb75c0b ("ASoC: rockchip: i2s: Adjust devm usage") Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/bcb12a849a05437fb18372bc7536c649b94bdf07.1570029862.git.robin.murphy@arm.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Yizhuo authored
BugLink: https://bugs.launchpad.net/bugs/1852110 [ Upstream commit 1252b283 ] In function pfuze100_regulator_probe(), variable "val" could be initialized if regmap_read() fails. However, "val" is used to decide the control flow later in the if statement, which is potentially unsafe. Signed-off-by:
Yizhuo <yzhai003@ucr.edu> Link: https://lore.kernel.org/r/20190929170957.14775-1-yzhai003@ucr.eduSigned-off-by:
-
Axel Lin authored
BugLink: https://bugs.launchpad.net/bugs/1852110 [ Upstream commit f64db548 ] ti_abb_wait_txdone() may return -ETIMEDOUT when ti_abb_check_txdone() returns true in the latest iteration of the while loop because the timeout value is abb->settling_time + 1. Similarly, ti_abb_clear_all_txdone() may return -ETIMEDOUT when ti_abb_check_txdone() returns false in the latest iteration of the while loop. Fix it. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Acked-by:
Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20190929095848.21960-1-axel.lin@ingics.comSigned-off-by:
-
Seth Forshee authored
BugLink: https://bugs.launchpad.net/bugs/1852110 [ Upstream commit 29be86d7 ] The gcc -fcf-protection=branch option is not compatible with -mindirect-branch=thunk-extern. The latter is used when CONFIG_RETPOLINE is selected, and this will fail to build with a gcc which has -fcf-protection=branch enabled by default. Adding -fcf-protection=none when building with retpoline enabled prevents such build failures. Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Connor Kuehl authored
BugLink: https://bugs.launchpad.net/bugs/1851549 Ignore: yes Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1851549Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit 1a7f60b9 ] This reverts commit caa8422d. It turned out that this commit caused a regression at shutdown / reboot, as the synchronize_irq() calls seems blocking the whole shutdown. Also another part of the change about shuffling the call order looks suspicious; the azx_stop_chip() call disables the CORB / RIRB while the others may still need the CORB/RIRB update. Since the original commit itself was a cargo-fix, let's revert the whole patch. Fixes: caa8422d ("ALSA: hda: Flush interrupts on disabling") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205333 BugLinK: https://bugs.freedesktop.org/show_bug.cgi?id=111174Signed-off-by:
Takashi Iwai <tiwai@suse.de> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://lore.kernel.org/r/20191028081056.22010-1-tiwai@suse.deSigned-off-by:
-
Vratislav Bendel authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit 19957a18 upstream. Due to an inverted logic mistake in xfs_buftarg_isolate() the xfs_buffers with zero b_lru_ref will take another trip around LRU, while isolating buffers with non-zero b_lru_ref. Additionally those isolated buffers end up right back on the LRU once they are released, because b_lru_ref remains elevated. Fix that circuitous route by leaving them on the LRU as originally intended. Signed-off-by:
Vratislav Bendel <vbendel@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Alex Lyakas <alex@zadara.com> Signed-off-by:
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit 9b6c0887 upstream. Now when sctp_connect() is called with a wrong sa_family, it binds to a port but doesn't set bp->port, then sctp_get_af_specific will return NULL and sctp_connect() returns -EINVAL. Then if sctp_bind() is called to bind to another port, the last port it has bound will leak due to bp->port is NULL by then. sctp_connect() doesn't need to bind ports, as later __sctp_connect will do it if bp->port is NULL. So remove it from sctp_connect(). While at it, remove the unnecessary sockaddr.sa_family len check as it's already done in sctp_inet_connect. Fixes: 644fbdea ("sctp: fix the issue that flags are ignored when using kernel_connect") Reported-by: syzbot+079bf326b38072f849d9@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit 644fbdea upstream. Now sctp uses inet_dgram_connect as its proto_ops .connect, and the flags param can't be passed into its proto .connect where this flags is really needed. sctp works around it by getting flags from socket file in __sctp_connect. It works for connecting from userspace, as inherently the user sock has socket file and it passes f_flags as the flags param into the proto_ops .connect. However, the sock created by sock_create_kern doesn't have a socket file, and it passes the flags (like O_NONBLOCK) by using the flags param in kernel_connect, which calls proto_ops .connect later. So to fix it, this patch defines a new proto_ops .connect for sctp, sctp_inet_connect, which calls __sctp_connect() directly with this flags param. After this, the sctp's proto .connect can be removed. Note that sctp_inet_connect doesn't need to do some checks that are not needed for sctp, which makes thing better than with inet_dgram_connect. Suggested-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit 159d2c7d upstream. qdisc_root() use from netem_enqueue() triggers a lockdep warning. __dev_queue_xmit() uses rcu_read_lock_bh() which is not equivalent to rcu_read_lock() + local_bh_disable_bh as far as lockdep is concerned. WARNING: suspicious RCU usage 5.3.0-rc7+ #0 Not tainted ----------------------------- include/net/sch_generic.h:492 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by syz-executor427/8855: #0: 00000000b5525c01 (rcu_read_lock_bh){....}, at: lwtunnel_xmit_redirect include/net/lwtunnel.h:92 [inline] #0: 00000000b5525c01 (rcu_read_lock_bh){....}, at: ip_finish_output2+0x2dc/0x2570 net/ipv4/ip_output.c:214 #1: 00000000b5525c01 (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x20a/0x3650 net/core/dev.c:3804 #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: spin_lock include/linux/spinlock.h:338 [inline] #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: __dev_xmit_skb net/core/dev.c:3502 [inline] #2: 00000000364bae92 (&(&sch->q.lock)->rlock){+.-.}, at: __dev_queue_xmit+0x14b8/0x3650 net/core/dev.c:3838 stack backtrace: CPU: 0 PID: 8855 Comm: syz-executor427 Not tainted 5.3.0-rc7+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5357 qdisc_root include/net/sch_generic.h:492 [inline] netem_enqueue+0x1cfb/0x2d80 net/sched/sch_netem.c:479 __dev_xmit_skb net/core/dev.c:3527 [inline] __dev_queue_xmit+0x15d2/0x3650 net/core/dev.c:3838 dev_queue_xmit+0x18/0x20 net/core/dev.c:3902 neigh_hh_output include/net/neighbour.h:500 [inline] neigh_output include/net/neighbour.h:509 [inline] ip_finish_output2+0x1726/0x2570 net/ipv4/ip_output.c:228 __ip_finish_output net/ipv4/ip_output.c:308 [inline] __ip_finish_output+0x5fc/0xb90 net/ipv4/ip_output.c:290 ip_finish_output+0x38/0x1f0 net/ipv4/ip_output.c:318 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip_mc_output+0x292/0xf40 net/ipv4/ip_output.c:417 dst_output include/net/dst.h:436 [inline] ip_local_out+0xbb/0x190 net/ipv4/ip_output.c:125 ip_send_skb+0x42/0xf0 net/ipv4/ip_output.c:1555 udp_send_skb.isra.0+0x6b2/0x1160 net/ipv4/udp.c:887 udp_sendmsg+0x1e96/0x2820 net/ipv4/udp.c:1174 inet_sendmsg+0x9e/0xe0 net/ipv4/af_inet.c:807 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:657 ___sys_sendmsg+0x3e2/0x920 net/socket.c:2311 __sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2439 do_syscall_64+0xfd/0x6a0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Valentin Vidic authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit 77b6d09f upstream. Make sure res does not contain random value if the call to sr_read_cmd fails for some reason. Reported-by: syzbot+f1842130bbcfb335bac1@syzkaller.appspotmail.com Signed-off-by:
Valentin Vidic <vvidic@valentin-vidic.from.hr> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit a7137534 upstream. syzbot got a NULL dereference in bond_update_slave_arr() [1], happening after a failure to allocate bond->slave_arr A workqueue (bond_slave_arr_handler) is supposed to retry the allocation later, but if the slave is removed before the workqueue had a chance to complete, bond->slave_arr can still be NULL. [1] Failed to build slave-array. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI Modules linked in: Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:bond_update_slave_arr.cold+0xc6/0x198 drivers/net/bonding/bond_main.c:4039 RSP: 0018:ffff88018fe33678 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc9000290b000 RDX: 0000000000000000 RSI: ffffffff82b63037 RDI: ffff88019745ea20 RBP: ffff88018fe33760 R08: ffff880170754280 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88019745ea00 R14: 0000000000000000 R15: ffff88018fe338b0 FS: 00007febd837d700(0000) GS:ffff8801dad00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004540a0 CR3: 00000001c242e005 CR4: 00000000001626f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: [<ffffffff82b5b45e>] __bond_release_one+0x43e/0x500 drivers/net/bonding/bond_main.c:1923 [<ffffffff82b5b966>] bond_release drivers/net/bonding/bond_main.c:2039 [inline] [<ffffffff82b5b966>] bond_do_ioctl+0x416/0x870 drivers/net/bonding/bond_main.c:3562 [<ffffffff83ae25f4>] dev_ifsioc+0x6f4/0x940 net/core/dev_ioctl.c:328 [<ffffffff83ae2e58>] dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:495 [<ffffffff83995ffd>] sock_do_ioctl+0x1bd/0x300 net/socket.c:1088 [<ffffffff83996a80>] sock_ioctl+0x300/0x5d0 net/socket.c:1196 [<ffffffff81b124db>] vfs_ioctl fs/ioctl.c:47 [inline] [<ffffffff81b124db>] file_ioctl fs/ioctl.c:501 [inline] [<ffffffff81b124db>] do_vfs_ioctl+0xacb/0x1300 fs/ioctl.c:688 [<ffffffff81b12dc6>] SYSC_ioctl fs/ioctl.c:705 [inline] [<ffffffff81b12dc6>] SyS_ioctl+0xb6/0xe0 fs/ioctl.c:696 [<ffffffff8101ccc8>] do_syscall_64+0x528/0x770 arch/x86/entry/common.c:305 [<ffffffff84400091>] entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: ee637714 ("bonding: Simplify the xmit function for modes that use xmit_hash") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit b74555de upstream. syzbot reported: BUG: memory leak unreferenced object 0xffff88811eb3de00 (size 224): comm "syz-executor559", pid 7315, jiffies 4294943019 (age 10.300s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 a0 38 24 81 88 ff ff 00 c0 f2 15 81 88 ff ff ..8$............ backtrace: [<000000008d1c66a1>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<000000008d1c66a1>] slab_post_alloc_hook mm/slab.h:439 [inline] [<000000008d1c66a1>] slab_alloc_node mm/slab.c:3269 [inline] [<000000008d1c66a1>] kmem_cache_alloc_node+0x153/0x2a0 mm/slab.c:3579 [<00000000447d9496>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:198 [<000000000cdbf82f>] alloc_skb include/linux/skbuff.h:1058 [inline] [<000000000cdbf82f>] llc_alloc_frame+0x66/0x110 net/llc/llc_sap.c:54 [<000000002418b52e>] llc_conn_ac_send_sabme_cmd_p_set_x+0x2f/0x140 net/llc/llc_c_ac.c:777 [<000000001372ae17>] llc_exec_conn_trans_actions net/llc/llc_conn.c:475 [inline] [<000000001372ae17>] llc_conn_service net/llc/llc_conn.c:400 [inline] [<000000001372ae17>] llc_conn_state_process+0x1ac/0x640 net/llc/llc_conn.c:75 [<00000000f27e53c1>] llc_establish_connection+0x110/0x170 net/llc/llc_if.c:109 [<00000000291b2ca0>] llc_ui_connect+0x10e/0x370 net/llc/af_llc.c:477 [<000000000f9c740b>] __sys_connect+0x11d/0x170 net/socket.c:1840 [...] The bug is that most callers of llc_conn_send_pdu() assume it consumes a reference to the skb, when actually due to commit b85ab56c ("llc: properly handle dev_queue_xmit() return value") it doesn't. Revert most of that commit, and instead make the few places that need llc_conn_send_pdu() to *not* consume a reference call skb_get() before. Fixes: b85ab56c ("llc: properly handle dev_queue_xmit() return value") Reported-by: syzbot+6b825a6494a04cc0e3f7@syzkaller.appspotmail.com Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit c6ee11c3 upstream. syzbot reported: BUG: memory leak unreferenced object 0xffff888116270800 (size 224): comm "syz-executor641", pid 7047, jiffies 4294947360 (age 13.860s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 20 e1 2a 81 88 ff ff 00 40 3d 2a 81 88 ff ff . .*.....@=*.... backtrace: [<000000004d41b4cc>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<000000004d41b4cc>] slab_post_alloc_hook mm/slab.h:439 [inline] [<000000004d41b4cc>] slab_alloc_node mm/slab.c:3269 [inline] [<000000004d41b4cc>] kmem_cache_alloc_node+0x153/0x2a0 mm/slab.c:3579 [<00000000506a5965>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:198 [<000000001ba5a161>] alloc_skb include/linux/skbuff.h:1058 [inline] [<000000001ba5a161>] alloc_skb_with_frags+0x5f/0x250 net/core/skbuff.c:5327 [<0000000047d9c78b>] sock_alloc_send_pskb+0x269/0x2a0 net/core/sock.c:2225 [<000000003828fe54>] sock_alloc_send_skb+0x32/0x40 net/core/sock.c:2242 [<00000000e34d94f9>] llc_ui_sendmsg+0x10a/0x540 net/llc/af_llc.c:933 [<00000000de2de3fb>] sock_sendmsg_nosec net/socket.c:652 [inline] [<00000000de2de3fb>] sock_sendmsg+0x54/0x70 net/socket.c:671 [<000000008fe16e7a>] __sys_sendto+0x148/0x1f0 net/socket.c:1964 [...] The bug is that llc_sap_state_process() always takes an extra reference to the skb, but sometimes neither llc_sap_next_state() nor llc_sap_state_process() itself drops this reference. Fix it by changing llc_sap_next_state() to never consume a reference to the skb, rather than sometimes do so and sometimes not. Then remove the extra skb_get() and kfree_skb() from llc_sap_state_process(). Reported-by: syzbot+6bf095f9becf5efef645@syzkaller.appspotmail.com Reported-by: syzbot+31c16aa4202dace3812e@syzkaller.appspotmail.com Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Yihui ZENG authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit b8e51a6a upstream. The problem is that we were putting the NUL terminator too far: buf[sizeof(buf) - 1] = '\0'; If the user input isn't NUL terminated and they haven't initialized the whole buffer then it leads to an info leak. The NUL terminator should be: buf[len - 1] = '\0'; Signed-off-by:
Yihui Zeng <yzeng56@asu.edu> Cc: stable@vger.kernel.org Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> [heiko.carstens@de.ibm.com: keep semantics of how *lenp and *ppos are handled] Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Markus Theil authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit 1fab1b89 upstream. Mesh path nexthop should be a ethernet address, but current validation checks against 4 byte integers. Cc: stable@vger.kernel.org Fixes: 2ec600d6 ("nl80211/cfg80211: support for mesh, sta dumping") Signed-off-by:
Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20191029093003.10355-1-markus.theil@tu-ilmenau.deSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Michał Mirosław authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit b3a81c77 upstream. On HID report descriptor parsing error the code displays bogus pointer instead of error offset (subtracts start=NULL from end). Make the message more useful by displaying correct error offset and include total buffer size for reference. This was carried over from ancient times - "Fixed" commit just promoted the message from DEBUG to ERROR. Cc: stable@vger.kernel.org Fixes: 8c3d52fc ("HID: make parser more verbose about parsing errors by default") Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Alan Stern authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit d9d4b1e4 upstream. The syzbot fuzzer found a slab-out-of-bounds write bug in the hid-gaff driver. The problem is caused by the driver's assumption that the device must have an input report. While this will be true for all normal HID input devices, a suitably malicious device can violate the assumption. The same assumption is present in over a dozen other HID drivers. This patch fixes them by checking that the list of hid_inputs for the hid_device is nonempty before allowing it to be used. Reported-and-tested-by: syzbot+403741a091bf41d4ae79@syzkaller.appspotmail.com Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit 84968291 upstream. Add missing endianness conversion when setting the line speed so that this driver might work also on big-endian machines. Also use an unsigned format specifier in the corresponding debug message. Signed-off-by:
Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191029102354.2733-3-johan@kernel.orgSigned-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit 1251dab9 upstream. Fix a user-controlled slab buffer overflow due to a missing sanity check on the bulk-out transfer buffer used for control requests. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit 52403cfb upstream. USB control-message timeouts are specified in milliseconds, not jiffies. Waiting 83 minutes for a transfer to complete is a bit excessive. Fixes: 2824bd25 ("[PATCH] USB: add ldusb driver") Cc: stable <stable@vger.kernel.org> # 2.6.13 Reported-by: syzbot+a4fbb3bb76cda0ea4e58@syzkaller.appspotmail.com Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit d98ee2a1 upstream. The custom ring-buffer implementation was merged without any locking or explicit memory barriers, but a spinlock was later added by commit 9d33efd9 ("USB: ldusb bugfix"). The lock did not cover the update of the tail index once the entry had been processed, something which could lead to memory corruption on weakly ordered architectures or due to compiler optimisations. Specifically, a completion handler running on another CPU might observe the incremented tail index and update the entry before ld_usb_read() is done with it. Fixes: 2824bd25 ("[PATCH] USB: add ldusb driver") Fixes: 9d33efd9 ("USB: ldusb bugfix") Cc: stable <stable@vger.kernel.org> # 2.6.13 Signed-off-by:
-
Alan Stern authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit 54f83b8c upstream. Endpoints with a maxpacket length of 0 are probably useless. They can't transfer any data, and it's not at all unlikely that a UDC will crash or hang when trying to handle a non-zero-length usb_request for such an endpoint. Indeed, dummy-hcd gets a divide error when trying to calculate the remainder of a transfer length by the maxpacket value, as discovered by the syzbot fuzzer. Currently the gadget core does not check for endpoints having a maxpacket value of 0. This patch adds a check to usb_ep_enable(), preventing such endpoints from being used. As far as I know, none of the gadget drivers in the kernel tries to create an endpoint with maxpacket = 0, but until now there has been nothing to prevent userspace programs under gadgetfs or configfs from doing it. Signed-off-by:
Felipe Balbi <balbi@kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910281052370.1485-100000@iolanthe.rowland.orgSigned-off-by:
-
Alan Stern authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit 1186f86a upstream. Commit 3ae62a42 ("UAS: fix alignment of scatter/gather segments"), copying a similar commit for usb-storage, attempted to solve a problem involving scatter-gather I/O and USB/IP by setting the virt_boundary_mask for mass-storage devices. However, it now turns out that the analogous change in usb-storage interacted badly with commit 09324d32 ("block: force an unlimited segment size on queues with a virt boundary"), which was added later. A typical error message is: ehci-pci 0000:00:13.2: swiotlb buffer is full (sz: 327680 bytes), total 32768 (slots), used 97 (slots) There is no longer any reason to keep the virt_boundary_mask setting in the uas driver. It was needed in the first place only for handling devices with a block size smaller than the maxpacket size and where the host controller was not capable of fully general scatter-gather operation (that is, able to merge two SG segments into a single USB packet). But: High-speed or slower connections never use a bulk maxpacket value larger than 512; The SCSI layer does not handle block devices with a block size smaller than 512 bytes; All the host controllers capable of SuperSpeed operation can handle fully general SG; Since commit ea44d190 ("usbip: Implement SG support to vhci-hcd and stub driver") was merged, the USB/IP driver can also handle SG. Therefore all supported device/controller combinations should be okay with no need for any special virt_boundary_mask. So in order to head off potential problems similar to those affecting usb-storage, this patch reverts commit 3ae62a42. Signed-off-by:
-
Takashi Sakamoto authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit f2bbdbcb upstream. A helper function of ALSA bebob driver returns negative value in a function which has a prototype to return unsigned value. This commit fixes it by changing the prototype. Fixes: eb7b3a05 ("ALSA: bebob: Add commands and connections/streams management") Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191026030620.12077-1-o-takashi@sakamocchi.jpSigned-off-by:
-
Miklos Szeredi authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit e4648309 upstream. Make sure cached writes are not reordered around open(..., O_TRUNC), with the obvious wrong results. Fixes: 4d99ff8f ("fuse: Turn writeback cache on") Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Miklos Szeredi authored
BugLink: https://bugs.launchpad.net/bugs/1851549 commit b24e7598 upstream. If writeback cache is enabled, then writes might get reordered with chmod/chown/utimes. The problem with this is that performing the write in the fuse daemon might itself change some of these attributes. In such case the following sequence of operations will result in file ending up with the wrong mode, for example: int fd = open ("suid", O_WRONLY|O_CREAT|O_EXCL); write (fd, "1", 1); fchown (fd, 0, 0); fchmod (fd, 04755); close (fd); This patch fixes this by flushing pending writes before performing chown/chmod/utimes. Reported-by:
Giuseppe Scrivano <gscrivan@redhat.com> Tested-by:
-
Mika Westerberg authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit 94379521 ] The register access should be using 32-bit reads/writes according to the datasheet. With the previous generation hardware 16-bit writes have been working but starting with ICL this is not the case anymore so fix producer/consumer register update to use correct width register address. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Yehezkel Bernat <YehezkelShB@gmail.com> Tested-by:
Mario Limonciello <mario.limonciello@dell.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1851549 [ Upstream commit fd47a417 ] The problem is that sizeof() is unsigned long so negative error codes are type promoted to high positive values and the condition becomes false. Fixes: 1d427be4 ("USB: legousbtower: fix slab info leak at probe") Signed-off-by:
-
