- 03 Feb, 2019 28 commits
-
-
Heiner Kallweit authored
Make use of macro PHY_ID_MATCH_MODEL to simplify the code. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Remove unneeded header includes. v2: - leave kernel.h in Signed-off-by:
-
Andrew Lunn authored
aquantia_ as a name space prefix is rather long, resulting in lots of lines needing wrapping, reducing readability. Use the prefix aqr_ instead, which fits with the vendor naming there devices aqr107, for example. v2: - add SoB from Heiner Signed-off-by:
-
Florian Fainelli authored
After 4effd28c ("bridge: join all-snoopers multicast address"), I started seeing the following sleep in atomic warnings: [ 26.763893] BUG: sleeping function called from invalid context at mm/slab.h:421 [ 26.771425] in_atomic(): 1, irqs_disabled(): 0, pid: 1658, name: sh [ 26.777855] INFO: lockdep is turned off. [ 26.781916] CPU: 0 PID: 1658 Comm: sh Not tainted 5.0.0-rc4 #20 [ 26.787943] Hardware name: BCM97278SV (DT) [ 26.792118] Call trace: [ 26.794645] dump_backtrace+0x0/0x170 [ 26.798391] show_stack+0x24/0x30 [ 26.801787] dump_stack+0xa4/0xe4 [ 26.805182] ___might_sleep+0x208/0x218 [ 26.809102] __might_sleep+0x78/0x88 [ 26.812762] kmem_cache_alloc_trace+0x64/0x28c [ 26.817301] igmp_group_dropped+0x150/0x230 [ 26.821573] ip_mc_dec_group+0x1b0/0x1f8 [ 26.825585] br_ip4_multicast_leave_snoopers.isra.11+0x174/0x190 [ 26.831704] br_multicast_toggle+0x78/0xcc [ 26.835887] store_bridge_parm+0xc4/0xfc [ 26.839894] multicast_snooping_store+0x3c/0x4c [ 26.844517] dev_attr_store+0x44/0x5c [ 26.848262] sysfs_kf_write+0x50/0x68 [ 26.852006] kernfs_fop_write+0x14c/0x1b4 [ 26.856102] __vfs_write+0x60/0x190 [ 26.859668] vfs_write+0xc8/0x168 [ 26.863059] ksys_write+0x70/0xc8 [ 26.866449] __arm64_sys_write+0x24/0x30 [ 26.870458] el0_svc_common+0xa0/0x11c [ 26.874291] el0_svc_handler+0x38/0x70 [ 26.878120] el0_svc+0x8/0xc while toggling the bridge's multicast_snooping attribute dynamically. Pass a gfp_t down to igmpv3_add_delrec(), introduce __igmp_group_dropped() and introduce __ip_mc_dec_group() to take a gfp_t argument. Similarly introduce ____ip_mc_inc_group() and __ip_mc_inc_group() to allow caller to specify gfp_t. IPv6 part of the patch appears fine. Fixes: 4effd28c ("bridge: join all-snoopers multicast address") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
Shared buffer allocation is usually done in cell increments. Drivers will either round up the allocation or refuse the configuration if it's not an exact multiple of cell size. Drivers know exactly the cell size of shared buffer, so help out users by providing this information in dumps. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
David S. Miller authored
Deepa Dinamani says: ==================== net: y2038-safe socket timestamps The series introduces new socket timestamps that are y2038 safe. The time data types used for the existing socket timestamp options: SO_TIMESTAMP, SO_TIMESTAMPNS and SO_TIMESTAMPING are not y2038 safe. The series introduces SO_TIMESTAMP_NEW, SO_TIMESTAMPNS_NEW and SO_TIMESTAMPING_NEW to replace these. These new timestamps can be used on all architectures. The alternative considered was to extend the sys_setsockopt() by using the flags. We did not receive any strong opinions about either of the approaches. Hence, this was chosen, as glibc folks preferred this. The series does not deal with updating the internal kernel socket calls like rxrpc to make them y2038 safe. This will be dealt with separately. Note that the timestamps behavior already does not match the man page specific behavior: SIOCGSTAMP This ioctl should only be used if the socket option SO_TIMESTAMP is not set on the socket. Otherwise, it returns the timestamp of the last packet that was received while SO_TIMESTAMP was not set, or it fails if no such packet has been received, (i.e., ioctl(2) returns -1 with errno set to ENOENT). The recommendation is to update the man page to remove the above statement. The overview of the socket timestamp series is as below: 1. Delete asm specific socket.h when possible. 2. Support SO/SCM_TIMESTAMP* options only in userspace. 3. Rename current SO/SCM_TIMESTAMP* to SO/SCM_TIMESTAMP*_OLD. 3. Alter socket options so that SOCK_RCVTSTAMPNS does not rely on SOCK_RCVTSTAMP. 4. Introduce y2038 safe types for socket timestamp. 5. Introduce new y2038 safe socket options SO/SCM_TIMESTAMP*_NEW. 6. Intorduce new y2038 safe socket timeout options. Changes since v4: * Fixed the typo in calling sock_get_timeout() Changes since v3: * Rebased onto net-next and fixups as per review comments * Merged the socket timeout series * Integrated Arnd's patch to simplify compat handling of timeout syscalls Changes since v2: * Removed extra functions to reduce diff churn as per code review Changes since v1: * Dropped the change to disentangle sock flags * Renamed sock_timeval to __kernel_sock_timeval * Updated a few comments * Added documentation changes ==================== Signed-off-by: -
Deepa Dinamani authored
Add new socket timeout options that are y2038 safe. Signed-off-by:
Deepa Dinamani <deepa.kernel@gmail.com> Acked-by:
Willem de Bruijn <willemb@google.com> Cc: ccaulfie@redhat.com Cc: davem@davemloft.net Cc: deller@gmx.de Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: rth@twiddle.net Cc: cluster-devel@redhat.com Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-alpha@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: sparclinux@vger.kernel.org Signed-off-by:
-
Deepa Dinamani authored
SO_RCVTIMEO and SO_SNDTIMEO socket options use struct timeval as the time format. struct timeval is not y2038 safe. The subsequent patches in the series add support for new socket timeout options with _NEW suffix that will use y2038 safe data structures. Although the existing struct timeval layout is sufficiently wide to represent timeouts, because of the way libc will interpret time_t based on user defined flag, these new flags provide a way of having a structure that is the same for all architectures consistently. Rename the existing options with _OLD suffix forms so that the right option is enabled for userspace applications according to the architecture and time_t definition of libc. Signed-off-by:
-
Deepa Dinamani authored
With the new y2038 safe timestamping options added, update the documentation to reflect the changes. Signed-off-by:
-
Deepa Dinamani authored
Add SO_TIMESTAMPING_NEW variant of socket timestamp options. This is the y2038 safe versions of the SO_TIMESTAMPING_OLD for all architectures. Signed-off-by:
-
Deepa Dinamani authored
Add SO_TIMESTAMP_NEW and SO_TIMESTAMPNS_NEW variants of socket timestamp options. These are the y2038 safe versions of the SO_TIMESTAMP_OLD and SO_TIMESTAMPNS_OLD for all architectures. Note that the format of scm_timestamping.ts[0] is not changed in this patch. Signed-off-by:
-
Deepa Dinamani authored
The new type is meant to be used as a y2038 safe structure to be used as part of cmsg data. Presently the SO_TIMESTAMP socket option uses struct timeval for timestamps. This is not y2038 safe. Subsequent patches in the series add new y2038 safe socket option to be used in the place of SO_TIMESTAMP_OLD. struct __kernel_sock_timeval will be used as the timestamp format at that time. struct __kernel_sock_timeval also maintains the same layout across 32 bit and 64 bit ABIs. Signed-off-by:
-
Deepa Dinamani authored
As part of y2038 solution, all internal uses of struct timeval are replaced by struct __kernel_old_timeval and struct compat_timeval by struct old_timeval32. Make socket timestamps use these new types. This is mainly to be able to verify that the kernel build is y2038 safe when such non y2038 safe types are not supported anymore. Signed-off-by:
-
Deepa Dinamani authored
struct __kernel_old_timeval is supposed to have the same layout as struct timeval. But, it was inadvarently missed that __kernel_suseconds has a different definition for sparc64. Provide an asm-specific override that fixes it. Reported-by:
Arnd Bergmann <arnd@arndb.de> Suggested-by:
-
Deepa Dinamani authored
SO_TIMESTAMP, SO_TIMESTAMPNS and SO_TIMESTAMPING options, the way they are currently defined, are not y2038 safe. Subsequent patches in the series add new y2038 safe versions of these options which provide 64 bit timestamps on all architectures uniformly. Hence, rename existing options with OLD tag suffixes. Also note that kernel will not use the untagged SO_TIMESTAMP* and SCM_TIMESTAMP* options internally anymore. Signed-off-by:
-
Deepa Dinamani authored
Many architectures maintain an arch specific copy of the file even though there are no differences with the asm-generic one. Allow these architectures to use the generic one instead. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Acked-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by:
-
Arnd Bergmann authored
This is a cleanup to prepare for the addition of 64-bit time_t in O_SNDTIMEO/O_RCVTIMEO. The existing compat handler seems unnecessarily complex and error-prone, moving it all into the main setsockopt()/getsockopt() implementation requires half as much code and is easier to extend. 32-bit user space can now use old_timeval32 on both 32-bit and 64-bit machines, while 64-bit code can use __old_kernel_timeval. Signed-off-by:
-
Deepa Dinamani authored
Compiling rxtimestamp.c generates error messages due to non-existing declaration for write() library call. Add missing unistd.h include to provide the declaration and silence the error. Signed-off-by:
-
Arjun Vynipadath authored
{t4/t4_vf}_change_mac() API's were only doing additions to MPS_TCAM. This will fail, when the number of tcam entries is limited particularly in vf's. This fix programs hash region with the mac address, when TCAM addtion fails for {t4/t4vf}_change_mac(). Since the locally maintained driver list for hash entries is shared across mac_{sync/unsync}(), added an extra parameter if_mac to track the address added thorugh {t4/t4vf}_change_mac() Signed-off-by:Arjun Vynipadath <arjun@chelsio.com> Signed-off-by:
-
Edward Chron authored
Don't drop IGMP packets with a source address of all zeros which are IGMP proxy reports. This is documented in Section 2.1.1 IGMP Forwarding Rules of RFC 4541 IGMP and MLD Snooping Switches Considerations. Signed-off-by:
Edward Chron <echron@arista.com> Signed-off-by:
-
Heiner Kallweit authored
The integrated PHY's of later RTL8168 network chips report the generic PHYID 0x001cc800 (Realtek OUI, model and revision number both set to zero) and therefore currently the genphy driver is used. To be able to use the paged version of e.g. phy_write() we need a PHY driver with the read_page and write_page callbacks implemented. So basically make a copy of the genphy driver, just with the read_page and write_page callbacks being set. Signed-off-by:
-
Colin Ian King authored
A return statment is not indented correctly, fix this by adding an extra tab. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
An if statement is indented one level too deep, fix this by removing the extra tabs. Also add some spaces to the dev_warn arguments to clean up checkpatch warnings. Signed-off-by:
-
Colin Ian King authored
The call to bfa_ioc_pf_failed is indented too far, fix this by removing a tab. Signed-off-by:
-
Colin Ian King authored
The assignment to size is indented too far, fix this and join two lines into one. Signed-off-by:
-
Alex Williams authored
Now the DMA engine is free to float elsewhere in the system map. Signed-off-by:
Alex Williams <alex.williams@ni.com> Signed-off-by:
-
Alex Williams authored
The DMA engine is a separate entity altogether, and this allows the DMA controller's address to float elsewhere in the FPGA's map. Signed-off-by:
-
Heiner Kallweit authored
rtl_wol_pll_power_down() is used in only one place and removing it makes the code simpler and better readable. Signed-off-by:
-
- 02 Feb, 2019 12 commits
-
-
David S. Miller authored
Huazhong Tan says: ==================== code optimizations & bugfixes for HNS3 driver This patchset includes bugfixes and code optimizations for the HNS3 ethernet controller driver ==================== Signed-off-by: -
liuzhongzhu authored
When updating the available MAC VLAN table counts, MAC VLAN table entry count function adds operation 0 value protection measures. Signed-off-by:
liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
liuzhongzhu authored
In order to prevent the variable anomaly from being larger than desc_num, the upper limit judgment condition becomes >=. Signed-off-by:
-
Jian Shen authored
When user disables vlan filter, and adds vlan device, it won't notify the driver the update the vlan filter. In this case, when user enables vlan filter again, the packets with new vlan tag will be filtered by vlan filter. Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
-
liuzhongzhu authored
Multiple macros with the largest number of TCs in the system, optimized to HCLGE_MAX_TC_NUM. Signed-off-by:
-
liuzhongzhu authored
Run ethtool ethx when displaying device information in VF， the supported port and link mode items will be empty. This patch fixes it. Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by:
-
Huazhong Tan authored
Only the TC is enabled, we need to check whether the buffer is enough, otherwise it may lead to a wrong -ENOMEM case. Fixes: 9ffe79a9 ("net: hns3: Support for dynamically assigning tx buffer to TC") Signed-off-by:
-
Weihang Li authored
This patch does not change the code logic. There are some same set_bit statements called by add/rm_uc/mc_addr_common, and move this statements into hclge_prepare_mac_addr to reduce duplicate code. Signed-off-by:
Weihang Li <liweihang@hisilicon.com> Signed-off-by:
-
Weihang Li authored
For simplifying the code, this patch adds hclge_cmd_check_retval() to check the return value of the command. Also, according the IMP's description, when there are several descriptors in a command, then the IMP will save the return value on the last description, so hclge_cmd_check_retval() just check the last one for this case. Signed-off-by:
-
Yunsheng Lin authored
There are four steps to calcuate the rx private buffer, each step can be done in a function to avoid code duplication and aid code readability. This patch adds three separate functions do the job. Also, the function name more or less make the comment redundant, so remove some obvious comment. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Yonglong Liu authored
The second parameter to the hook function set_gro_en is always passed in true/false, so modify it's type from int to bool. Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
-
Peng Li authored
HNS3 supports setting rx-usecs|tx-usecs as 0, but it will not update dynamically when adaptive-tx or adaptive-rx is enable. This patch removes the Redundant check. Fixes: a95e1f86 ("net: hns3: change the time interval of int_gl calculating") Signed-off-by:
-
