- 25 Jan, 2021 13 commits
-
-
Luiz Augusto von Dentz authored
Bluetooth Core Specification v5.2, Vol. 3, Part A, section 1.4, table 1.1: 'Start Fragments always either begin with the first octet of the Basic L2CAP header of a PDU or they have a length of zero (see [Vol 2] Part B, Section 6.6.2).' Apparently this was changed by the following errata: https://www.bluetooth.org/tse/errata_view.cfm?errata_id=10216Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Vamshi K Sthambamkadi authored
kmemleak report: unreferenced object 0xffff9b1127f00500 (size 208): comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 60 ed 05 11 9b ff ff 00 00 00 00 00 00 00 00 .`.............. backtrace: [<000000006ab3fd59>] kmem_cache_alloc_node+0x17a/0x480 [<0000000051a5f6f9>] __alloc_skb+0x5b/0x1d0 [<0000000037e2d252>] hci_prepare_cmd+0x32/0xc0 [bluetooth] [<0000000010b586d5>] hci_req_add_ev+0x84/0xe0 [bluetooth] [<00000000d2deb520>] hci_req_clear_event_filter+0x42/0x70 [bluetooth] [<00000000f864bd8c>] hci_req_prepare_suspend+0x84/0x470 [bluetooth] [<000000001deb2cc4>] hci_prepare_suspend+0x31/0x40 [bluetooth] [<000000002677dd79>] process_one_work+0x209/0x3b0 [<00000000aaa62b07>] worker_thread+0x34/0x400 [<00000000826d176c>] kthread+0x126/0x140 [<000000002305e558>] ret_from_fork+0x22/0x30 unreferenced object 0xffff9b1125c6ee00 (size 512): comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s) hex dump (first 32 bytes): 04 00 00 00 0d 00 00 00 05 0c 01 00 11 9b ff ff ................ 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ backtrace: [<000000009f07c0cc>] slab_post_alloc_hook+0x59/0x270 [<0000000049431dc2>] __kmalloc_node_track_caller+0x15f/0x330 [<00000000027a42f6>] __kmalloc_reserve.isra.70+0x31/0x90 [<00000000e8e3e76a>] __alloc_skb+0x87/0x1d0 [<0000000037e2d252>] hci_prepare_cmd+0x32/0xc0 [bluetooth] [<0000000010b586d5>] hci_req_add_ev+0x84/0xe0 [bluetooth] [<00000000d2deb520>] hci_req_clear_event_filter+0x42/0x70 [bluetooth] [<00000000f864bd8c>] hci_req_prepare_suspend+0x84/0x470 [bluetooth] [<000000001deb2cc4>] hci_prepare_suspend+0x31/0x40 [bluetooth] [<000000002677dd79>] process_one_work+0x209/0x3b0 [<00000000aaa62b07>] worker_thread+0x34/0x400 [<00000000826d176c>] kthread+0x126/0x140 [<000000002305e558>] ret_from_fork+0x22/0x30 unreferenced object 0xffff9b112b395788 (size 8): comm "kworker/u17:2", pid 500, jiffies 4294937470 (age 580.136s) hex dump (first 8 bytes): 20 00 00 00 00 00 04 00 ....... backtrace: [<0000000052dc28d2>] kmem_cache_alloc_trace+0x15e/0x460 [<0000000046147591>] alloc_ctrl_urb+0x52/0xe0 [btusb] [<00000000a2ed3e9e>] btusb_send_frame+0x91/0x100 [btusb] [<000000001e66030e>] hci_send_frame+0x7e/0xf0 [bluetooth] [<00000000bf6b7269>] hci_cmd_work+0xc5/0x130 [bluetooth] [<000000002677dd79>] process_one_work+0x209/0x3b0 [<00000000aaa62b07>] worker_thread+0x34/0x400 [<00000000826d176c>] kthread+0x126/0x140 [<000000002305e558>] ret_from_fork+0x22/0x30 In pm sleep-resume context, while the btusb device rebinds, it enters hci_unregister_dev(), whilst there is a possibility of hdev receiving PM_POST_SUSPEND suspend_notifier event, leading to generation of msg frames. When hci_unregister_dev() completes, i.e. hdev context is destroyed/freed, those intermittently sent msg frames cause memory leak. BUG details: Below is stack trace of thread that enters hci_unregister_dev(), marks the hdev flag HCI_UNREGISTER to 1, and then goes onto to wait on notifier lock - refer unregister_pm_notifier(). hci_unregister_dev+0xa5/0x320 [bluetoot] btusb_disconnect+0x68/0x150 [btusb] usb_unbind_interface+0x77/0x250 ? kernfs_remove_by_name_ns+0x75/0xa0 device_release_driver_internal+0xfe/0x1 device_release_driver+0x12/0x20 bus_remove_device+0xe1/0x150 device_del+0x192/0x3e0 ? usb_remove_ep_devs+0x1f/0x30 usb_disable_device+0x92/0x1b0 usb_disconnect+0xc2/0x270 hub_event+0x9f6/0x15d0 ? rpm_idle+0x23/0x360 ? rpm_idle+0x26b/0x360 process_one_work+0x209/0x3b0 worker_thread+0x34/0x400 ? process_one_work+0x3b0/0x3b0 kthread+0x126/0x140 ? kthread_park+0x90/0x90 ret_from_fork+0x22/0x30 Below is stack trace of thread executing hci_suspend_notifier() which processes the PM_POST_SUSPEND event, while the unbinding thread is waiting on lock. hci_suspend_notifier.cold.39+0x5/0x2b [bluetooth] blocking_notifier_call_chain+0x69/0x90 pm_notifier_call_chain+0x1a/0x20 pm_suspend.cold.9+0x334/0x352 state_store+0x84/0xf0 kobj_attr_store+0x12/0x20 sysfs_kf_write+0x3b/0x40 kernfs_fop_write+0xda/0x1c0 vfs_write+0xbb/0x250 ksys_write+0x61/0xe0 __x64_sys_write+0x1a/0x20 do_syscall_64+0x37/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix hci_suspend_notifer(), not to act on events when flag HCI_UNREGISTER is set. Signed-off-by:Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
The standard DT property name is "interrupt-names". Fixes: fd913ef7 ("Bluetooth: btusb: Add out-of-band wakeup support") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Brian Norris <briannorris@chromium.org> Acked-by:
Rajat Jain <rajatja@google.com> Signed-off-by:
-
Pan Bian authored
Jump to the label done to decrement the reference count of HCI device hdev on path that the Inquiry procedure is interrupted. Fixes: 3e13fa1e ("Bluetooth: Fix hci_inquiry ioctl usage") Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
-
Pan Bian authored
Call hci_dev_put() to decrement reference count of HCI device hdev if fails to duplicate memory. Fixes: 0b26ab9d ("Bluetooth: AMP: Handle Accept phylink command status evt") Signed-off-by:
-
Howard Chung authored
This adds logic to disable and reenable advertisement filters during suspend and resume. After this patch, we would only receive packets from devices in allow list during suspend. Signed-off-by:
Howard Chung <howardchung@google.com> Reviewed-by:
Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by:
-
Archie Pusaka authored
When MSFT extension is supported, we don't have to interleave the scan as we could just do allowlist scan. Signed-off-by:
Archie Pusaka <apusaka@chromium.org> Reviewed-by:
Miao-chen Chou <mcchou@chromium.org> Signed-off-by:
-
Archie Pusaka authored
Implements the feature to disable/enable the filter used for advertising monitor on MSFT controller, effectively have the same effect as "remove all monitors" and "add all previously removed monitors". This feature would be needed when suspending, where we would not want to get packets from anything outside the allowlist. Note that the integration with the suspending part is not included in this patch. Signed-off-by:
-
Archie Pusaka authored
When the controller is powered off, the registered advertising monitor is removed from the controller. This patch handles the re-registration of those monitors when the power is on. Signed-off-by:
-
Archie Pusaka authored
Implements the monitor removal functionality for advertising monitor offloading to MSFT controllers. Supply handle = 0 to remove all monitors. Signed-off-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Archie Pusaka authored
Enables advertising monitor offloading to the controller, if MSFT extension is supported. The kernel won't adjust the monitor parameters to match what the controller supports - that is the user space's responsibility. This patch only manages the addition of monitors. Monitor removal is going to be handled by another patch. Signed-off-by:
Manish Mandlik <mmandlik@chromium.org> Reviewed-by:
-
Archie Pusaka authored
MSFT needs rssi parameter for monitoring advertisement packet, therefore we should supply them from mgmt. This adds a new opcode to add advertisement monitor with rssi parameters. Signed-off-by:
-
Claire Chang authored
Realtek Bluetooth controllers can do both LE scan and BR/EDR inquiry at once, need to set HCI_QUIRK_SIMULTANEOUS_DISCOVERY quirk. Signed-off-by:
Claire Chang <tientzu@chromium.org> Signed-off-by:
-
- 06 Jan, 2021 6 commits
-
-
Venkata Lakshmi Narayana Gubba authored
During SSR after memory dump collection,BT controller will be powered off, powered on and then FW will be downloaded.During suspend if BT controller is powered off due to SSR then we should wait until SSR is completed and then suspend. Fixes: 2be43aba ("Bluetooth: hci_qca: Wait for timeout during suspend") Signed-off-by:
Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> Signed-off-by:
-
Dinghao Liu authored
When __le32_to_cpu() fails, qca_memdump should be freed just like when vmalloc() fails. Fixes: d841502c ("Bluetooth: hci_qca: Collect controller memory dump during SSR") Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by:
-
John-Eric Kamps authored
RTL8723DS could be handled by btrtl-driver, so add ability to bind it using device tree. Signed-off-by:
John-Eric Kamps <johnny86@gmx.de> Signed-off-by:
-
Kiran K authored
VID:PID -> 8087:0033 cat /sys/kernel/debug/usb/devices: T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=03 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0033 Rev= 0.00 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by:
Kiran K <kiran.k@intel.com> Signed-off-by:
-
Ard Biesheuvel authored
u128_xor() takes pointers to quantities that are assumed to be at least 64-bit aligned, which is not guaranteed to be the case in the smp_c1() routine. So switch to crypto_xor() instead. Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
-
Abhishek Pandit-Subedi authored
btrtl_dev->ic_info is only available from the controller on cold boot (the lmp subversion matches the device model and this is used to look up the ic_info). On warm boots (firmware already loaded), btrtl_dev->ic_info is null. Fixes: 05672a2c (Bluetooth: btrtl: Enable central-peripheral role) Signed-off-by:
-
- 27 Dec, 2020 1 commit
-
-
Christopher William Snowhill authored
Looks like this was missed when patching the source to clear the structures throughout, causing this one instance to clear the struct after the response id is assigned. Fixes: eddb7732 ("Bluetooth: A2MP: Fix not initializing all members") Signed-off-by:
Christopher William Snowhill <chris@kode54.net> Signed-off-by:
-
- 22 Dec, 2020 1 commit
-
-
Abhishek Pandit-Subedi authored
Enable the central-peripheral role on RTL8822CE. This enables creating connections while there is an existing connection in the slave role. This change can be confirmed in userspace via `bluetoothctl show` which will now show "Roles: central-peripheral". Reviewed-by:
Daniel Winkler <danielwinkler@google.com> Signed-off-by:
-
- 21 Dec, 2020 1 commit
-
-
Joe Perches authored
The bt_dev_<level> macros already append a newline. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
- 18 Dec, 2020 14 commits
-
-
Sonny Sasaka authored
Many controllers do not allow HCI Create Connection while it is doing Inquiry. This patch adds Inquiry Cancel before Create Connection in this case to allow the controller to do Create Connection. User space will be aware of this Inquiry cancellation and they may issue another discovery request afterwards. Sample Command Disallowed response of HCI Create Connection: < HCI Command: Inquiry (0x01|0x0001) plen 5 Access code: 0x9e8b33 (General Inquiry) Length: 10.24s (0x08) Num responses: 0 > HCI Event: Command Status (0x0f) plen 4 Inquiry (0x01|0x0001) ncmd 2 Status: Success (0x00) < HCI Command: Create Connection (0x01|0x0005) plen 13 Address: XX:XX:XX:XX:XX:XX Packet type: 0xcc18 Page scan repetition mode: R2 (0x02) Page scan mode: Mandatory (0x00) Clock offset: 0x0000 Role switch: Allow slave (0x01) > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) ncmd 1 Status: Success (0x00) > HCI Event: Connect Complete (0x03) plen 11 Status: Command Disallowed (0x0c) Handle: 65535 Address: XX:XX:XX:XX:XX:XX Link type: ACL (0x01) Encryption: Disabled (0x00) Reviewed-by:Alain Michaud <alainm@chromium.org> Signed-off-by:
Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by:
-
Jagdish Tirumala authored
Switch and case where not properly aligned Signed-off-by:
Jagdish Tirumala <t.jag587@gmail.com> Signed-off-by:
-
Kiran K authored
This reverts commit a63f23c9d139377833a139b179793fea79ee198f. get_unaligned_{le16|le32|le64}(p) is meant to replace code of the form le16_to_cpu(get_unaligned((__le16 *)p)). There is no need to explicitly do leXX_to_cpu() if get_unaligned_leXX() is used. https://lwn.net/Articles/277779/Reported-by: -
Jakub Pawlowski authored
This enables bcm driver to properly handle ISO packets. Signed-off-by:
Jakub Pawlowski <jpawlowski@google.com> Signed-off-by:
-
Miao-chen Chou authored
The Realtek RTL8822CE Bluetooth controller support Microsoft vendor extension and it uses 0xFCF0 for VsMsftOpCode. The following test step was performed. - Boot the test device with RTL8822CE and verify the INFO print in dmesg. Signed-off-by:
-
Miao-chen Chou authored
The Intel JeffersonPeak, HarrisonPeak and CyclonePeak Bluetooth controllers support the Microsoft vendor extension and they are using 0xFC1E for VsMsftOpCode. < HCI Command: Vendor (0x3f|0x001e) plen 1 00 > HCI Event: Command Complete (0x0e) plen 15 Vendor (0x3f|0x001e) ncmd 1 Status: Success (0x00) 00 3f 00 00 00 00 00 00 00 01 50 The following test step was performed. - Boot the test devices with HarrisonPeak and verify INFO print in dmesg. Signed-off-by: -
Miao-chen Chou authored
The following Qualcomm WCN399x Bluetooth controllers support the Microsoft vendor extension and they are using 0xFD70 for VsMsftOpCode. -WCN3990 -WCN3991 -WCN3998 < HCI Command: ogf 0x3f, ocf 0x0170, plen 1 00 > HCI Event: 0x0e plen 18 01 70 FD 00 00 1F 00 00 00 00 00 00 00 04 4D 53 46 54 The following test step was performed. - Boot the device with WCN3991 and verify INFO print in dmesg. Signed-off-by:
-
Abhishek Pandit-Subedi authored
Just like MGMT_OP_START_DISCOVERY, we should reject MGMT_OP_START_SERVICE_DISCOVERY with MGMT_STATUS_BUSY when we are paused for suspend. Signed-off-by:
-
Tim Jiang authored
we should send hci reset command before bt turn off, which can reset bt firmware status. Signed-off-by:
Tim Jiang <tjiang@codeaurora.org> Signed-off-by:
-
Abhishek Pandit-Subedi authored
Add a missing SUSPEND_SCAN_ENABLE in passive scan, remove the separate function for configuring le scan during suspend and update the request complete function to clear both enable and disable tasks. Fixes: dce0a4be ("Bluetooth: Set missing suspend task bits") Reviewed-by:
-
Claire Chang authored
In hci_uart_write_work, there is a loop/goto checking the value of HCI_UART_TX_WAKEUP. If HCI_UART_TX_WAKEUP is set again, it keeps trying hci_uart_dequeue; otherwise, it clears HCI_UART_SENDING and returns. In hci_uart_tx_wakeup, if HCI_UART_SENDING is already set, it sets HCI_UART_TX_WAKEUP, skips schedule_work and assumes the running/pending hci_uart_write_work worker will do hci_uart_dequeue properly. However, if the HCI_UART_SENDING check in hci_uart_tx_wakeup is done after the loop breaks, but before HCI_UART_SENDING is cleared in hci_uart_write_work, the schedule_work is skipped incorrectly. Fix this race by changing the order of HCI_UART_SENDING and HCI_UART_TX_WAKEUP modification. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Fixes: 82f5169b ("Bluetooth: hci_uart: add serdev driver support library") Signed-off-by:
-
Venkata Lakshmi Narayana Gubba authored
Add support to read FW build version from debugfs node. This info can be read from /sys/kernel/debug/bluetooth/hci0/firmware_info Signed-off-by:
-
Trent Piepho authored
When alt mode 6 is not available, fallback to the kernel <= 5.7 behavior of always using alt mode 1. Prior to kernel 5.8, btusb would always use alt mode 1 for WBS (Wide Band Speech aka mSBC aka transparent SCO). In commit baac6276 ("Bluetooth: btusb: handle mSBC audio over USB Endpoints") this was changed to use alt mode 6, which is the recommended mode in the Bluetooth spec (Specifications of the Bluetooth System, v5.0, Vol 4.B §2.2.1). However, many if not most BT USB adapters do not support alt mode 6. In fact, I have been unable to find any which do. In kernel 5.8, this was changed to use alt mode 6, and if not available, use alt mode 0. But mode 0 has a zero byte max packet length and can not possibly work. It is just there as a zero-bandwidth dummy mode to work around a USB flaw that would prevent device enumeration if insufficient bandwidth were available for the lowest isoc mode supported. In effect, WBS was broken for all USB-BT adapters that do not support alt 6, which appears to nearly all of them. Then in commit 461f95f0 ("Bluetooth: btusb: USB alternate setting 1 for WBS") the 5.7 behavior was restored, but only for Realtek adapters. I've tested a Broadcom BRCM20702A and CSR 8510 adapter, both work with the 5.7 behavior and do not with the 5.8. So get rid of the Realtek specific flag and use the 5.7 behavior for all adapters as a fallback when alt 6 is not available. This was the kernel's behavior prior to 5.8 and I can find no adapters for which it is not correct. And even if there is an adapter for which this does not work, the current behavior would be to fall back to alt 0, which can not possibly work either, and so is no better. Signed-off-by:
Trent Piepho <tpiepho@gmail.com> Signed-off-by:
-
Christophe JAILLET authored
Some resource should be released in the error handling path of the probe function, as already done in the remove function. The remove function was fixed in commit 5052de8d ("soc: qcom: smd: Transition client drivers from smd to rpmsg") Fixes: 1511cc75 ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
- 15 Dec, 2020 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging / IIO driver updates from Greg KH: "Here is the big staging and IIO driver pull request for 5.11-rc1 Lots of different things in here: - loads of driver updates - so many coding style cleanups - new IIO drivers - Android ION code is finally removed from the tree - wimax drivers are moved to staging on their way out of the kernel Nothing really exciting, just the constant grind of kernel development :) All have been in linux-next for a while with no reported issues" * tag 'staging-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (341 commits) staging: olpc_dcon: Do not call platform_device_unregister() in dcon_probe() staging: most: Fix spelling mistake "tranceiver" -> "transceiver" staging: qlge: remove duplicate word in comment staging: comedi: mf6x4: Fix AI end-of-conversion detection staging: greybus: Add TODO item about modernizing the pwm code pinctrl: ralink: add a pinctrl driver for the rt2880 family dt-bindings: pinctrl: rt2880: add binding document staging: rtl8723bs: remove ELEMENT_ID enum staging: rtl8723bs: remove unused macros staging: rtl8723bs: replace EID_EXTCapability staging: rtl8723bs: replace EID_BSSIntolerantChlReport staging: rtl8723bs: replace EID_BSSCoexistence staging: rtl8723bs: replace _MME_IE_ staging: rtl8723bs: replace _WAPI_IE_ staging: rtl8723bs: replace _EXT_SUPPORTEDRATES_IE_ staging: rtl8723bs: replace _ERPINFO_IE_ staging: rtl8723bs: replace _CHLGETXT_IE_ staging: rtl8723bs: replace _COUNTRY_IE_ staging: rtl8723bs: replace _IBSS_PARA_IE_ staging: rtl8723bs: replace _TIM_IE_ ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char / misc driver updates from Greg KH: "Here is the big char/misc driver update for 5.11-rc1. Continuing the tradition of previous -rc1 pulls, there seems to be more and more tiny driver subsystems flowing through this tree. Lots of different things, all of which have been in linux-next for a while with no reported issues: - extcon driver updates - habannalab driver updates - mei driver updates - uio driver updates - binder fixes and features added - soundwire driver updates - mhi bus driver updates - phy driver updates - coresight driver updates - fpga driver updates - speakup driver updates - slimbus driver updates - various small char and misc driver updates" * tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (305 commits) extcon: max77693: Fix modalias string extcon: fsa9480: Support TI TSU6111 variant extcon: fsa9480: Rewrite bindings in YAML and extend dt-bindings: extcon: add binding for TUSB320 extcon: Add driver for TI TUSB320 slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew() siox: Make remove callback return void siox: Use bus_type functions for probe, remove and shutdown spmi: Add driver shutdown support spmi: fix some coding style issues at the spmi core spmi: get rid of a warning when built with W=1 uio: uio_hv_generic: use devm_kzalloc() for private data alloc uio: uio_fsl_elbc_gpcm: use device-managed allocators uio: uio_aec: use devm_kzalloc() for uio_info object uio: uio_cif: use devm_kzalloc() for uio_info object uio: uio_netx: use devm_kzalloc() for or uio_info object uio: uio_mf624: use devm_kzalloc() for uio_info object uio: uio_sercos3: use device-managed functions for simple allocs uio: uio_dmem_genirq: finalize conversion of probe to devm_ handlers uio: uio_dmem_genirq: convert simple allocations to device-managed ...
-
Linus Torvalds authored
Merge tag 'driver-core-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big driver core updates for 5.11-rc1 This time there was a lot of different work happening here for some reason: - redo of the fwnode link logic, speeding it up greatly - auxiliary bus added (this was a tag that will be pulled in from other trees/maintainers this merge window as well, as driver subsystems started to rely on it) - platform driver core cleanups on the way to fixing some long-time api updates in future releases - minor fixes and tweaks. All have been in linux-next with no (finally) reported issues. Testing there did helped in shaking issues out a lot :)" * tag 'driver-core-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (39 commits) driver core: platform: don't oops in platform_shutdown() on unbound devices ACPI: Use fwnode_init() to set up fwnode misc: pvpanic: Replace OF headers by mod_devicetable.h misc: pvpanic: Combine ACPI and platform drivers usb: host: sl811: Switch to use platform_get_mem_or_io() vfio: platform: Switch to use platform_get_mem_or_io() driver core: platform: Introduce platform_get_mem_or_io() dyndbg: fix use before null check soc: fix comment for freeing soc_dev_attr driver core: platform: use bus_type functions driver core: platform: change logic implementing platform_driver_probe driver core: platform: reorder functions driver core: make driver_probe_device() static driver core: Fix a couple of typos driver core: Reorder devices on successful probe driver core: Delete pointless parameter in fwnode_operations.add_links driver core: Refactor fw_devlink feature efi: Update implementation of add_links() to create fwnode links of: property: Update implementation of add_links() to create fwnode links driver core: Use device's fwnode to check if it is waiting for suppliers ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty / serial updates from Greg KH: "Here is the "large" set of tty and serial patches for 5.11-rc1. Nothing major at all, some cleanups and some driver removals, always a nice sign: - build warning cleanups - vt locking and logic unwinding and cleanups - tiny serial driver fixes and updates - removal of the synclink serial driver as it's no longer needed - removal of dead termiox code All of this has been in linux-next for a while with no reported issues" * tag 'tty-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (89 commits) serial: 8250_pci: Drop bogus __refdata annotation tty: serial: meson: enable console as module serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access serial: imx: Move imx_uart_probe_dt() content into probe() serial: imx: Remove unneeded of_device_get_match_data() NULL check tty: Fix whitespace inconsistencies in vt_io_ioctl serial_core: Check for port state when tty is in error state dt-bindings: serial: Update DT binding docs to support SiFive FU740 SoC tty: use const parameters in port-flag accessors tty: use assign_bit() in port-flag accessors earlycon: drop semicolon from earlycon macro tty: Remove dead termiox code tty/serial/imx: Enable TXEN bit in imx_poll_init(). tty : serial: jsm: Fixed file by adding spacing tty: serial: uartlite: Support probe deferral earlycon: simplify earlycon-table implementation tty: serial: bcm63xx: lower driver dependencies serial: mxs-auart: Remove unneeded platform_device_id serial: 8250-mtk: Fix reference leak in mtk8250_probe serial: imx: Remove unused .id_table support ...
-
