If no switch were found in dsa_setup_dst, return -ENODEV and
exit the dsa_probe cleanly.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now the kfree calls exists in the the remove functions, remove them in all
places except the of_probe functions and replace allocation calls
with their devm_ counterparts.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When unbinding dsa, complete the dsa_switch_destroy to unregister the
fixed link phy then cleanly unregister and destroy the net devices.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To prevent memory leakage on unbinding, add missing mdiobus unregister
and unallocation calls.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To prevent memory leakage on unbinding, add missing kfree calls.
Includes minor cosmetic change to make patch clean.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It occurred to me yesterday that 741a11d9 ("net: ipv6: Add
RT6_LOOKUP_F_IFACE flag if oif is set") means that xfrm6_dst_lookup
needs the FLOWI_FLAG_SKIP_NH_OIF flag set. This latest commit causes
the oif to be considered in lookups which is known to break vti. This
explains why 58189ca7 did not the IPv6 change at the time it was
submitted.

Fixes: 42a7b32b ("xfrm: Add oif to dst lookups")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The standard way to check if the AQ is enabled is to look at the
count field. So we should only set this field after we have
successfully allocated memory. To do otherwise is to incite
panic among the populace.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The kasprintf function can return NULL if the allocation fails. Check for
successful allocation before attempting to use the returned buffer.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Not every device has dev->tstats set. So when OVS tries to calculate
vport stats it causes kernel panic. Following patch fixes it by
using standard API to get net-device stats.

---8<---
Unable to handle kernel paging request at virtual address 766b4008
Internal error: Oops: 96000005 [#1] PREEMPT SMP
Modules linked in: vport_vxlan vxlan ip6_udp_tunnel udp_tunnel tun bridge stp llc openvswitch ipv6
CPU: 7 PID: 1108 Comm: ovs-vswitchd Not tainted 4.3.0-rc3+ #82
PC is at ovs_vport_get_stats+0x150/0x1f8 [openvswitch]
<snip>
Call trace:
 [<ffffffbffc0859f8>] ovs_vport_get_stats+0x150/0x1f8 [openvswitch]
 [<ffffffbffc07cdb0>] ovs_vport_cmd_fill_info+0x140/0x1e0 [openvswitch]
 [<ffffffbffc07cf0c>] ovs_vport_cmd_dump+0xbc/0x138 [openvswitch]
 [<ffffffc00045a5ac>] netlink_dump+0xb8/0x258
 [<ffffffc00045ace0>] __netlink_dump_start+0x120/0x178
 [<ffffffc00045dd9c>] genl_family_rcv_msg+0x2d4/0x308
 [<ffffffc00045de58>] genl_rcv_msg+0x88/0xc4
 [<ffffffc00045cf24>] netlink_rcv_skb+0xd4/0x100
 [<ffffffc00045dab0>] genl_rcv+0x30/0x48
 [<ffffffc00045c830>] netlink_unicast+0x154/0x200
 [<ffffffc00045cc9c>] netlink_sendmsg+0x308/0x364
 [<ffffffc00041e10c>] sock_sendmsg+0x14/0x2c
 [<ffffffc000420d58>] SyS_sendto+0xbc/0xf0
Code: aa1603e1 f94037a4 aa1303e2 aa1703e0 (f9400465)
Reported-by: Tomasz Sawicki <tomasz.sawicki@objectiveintegration.uk>
Fixes: 8c876639 ("openvswitch: Remove vport stats.")
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Without this patch, if the only instructions using r_X are of the
BPF_LD | BPF_IND type, r_X would not be reset to 0, using whatever
value was there when entering the jited code. With this patch, r_X
will be correctly marked as used so it will be reset to 0 in the
prologue code.

This fix also makes the test "LD_IND byte default X" pass in the
test_bpf module when the ARM JIT is enabled.
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

When openvswitch tries allocate memory from offline numa node 0:
stats = kmem_cache_alloc_node(flow_stats_cache, GFP_KERNEL | __GFP_ZERO, 0)
It catches VM_BUG_ON(nid < 0 || nid >= MAX_NUMNODES || !node_online(nid))
[ replaced with VM_WARN_ON(!node_online(nid)) recently ] in linux/gfp.h
This patch disables numa affinity in this case.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When sockets have a native eBPF program attached through
setsockopt(sk, SOL_SOCKET, SO_ATTACH_BPF, ...), and then try to
dump these over getsockopt(sk, SOL_SOCKET, SO_GET_FILTER, ...),
the following panic appears:

  [49904.178642] BUG: unable to handle kernel NULL pointer dereference at (null)
  [49904.178762] IP: [<ffffffff81610fd9>] sk_get_filter+0x39/0x90
  [49904.182000] PGD 86fc9067 PUD 531a1067 PMD 0
  [49904.185196] Oops: 0000 [#1] SMP
  [...]
  [49904.224677] Call Trace:
  [49904.226090]  [<ffffffff815e3d49>] sock_getsockopt+0x319/0x740
  [49904.227535]  [<ffffffff812f59e3>] ? sock_has_perm+0x63/0x70
  [49904.228953]  [<ffffffff815e2fc8>] ? release_sock+0x108/0x150
  [49904.230380]  [<ffffffff812f5a43>] ? selinux_socket_getsockopt+0x23/0x30
  [49904.231788]  [<ffffffff815dff36>] SyS_getsockopt+0xa6/0xc0
  [49904.233267]  [<ffffffff8171b9ae>] entry_SYSCALL_64_fastpath+0x12/0x71

The underlying issue is the very same as in commit b382c086
("sock, diag: fix panic in sock_diag_put_filterinfo"), that is,
native eBPF programs don't store an original program since this
is only needed in cBPF ones.

However, sk_get_filter() wasn't updated to test for this at the
time when eBPF could be attached. Just throw an error to the user
to indicate that eBPF cannot be dumped over this interface.
That way, it can also be known that a program _is_ attached (as
opposed to just return 0), and a different (future) method needs
to be consulted for a dump.

Fixes: 89aa0758 ("net: sock: allow eBPF programs to be attached to sockets")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Conntrack LABELS (plural) are exposed by conntrack; rename the OVS name
for these to be consistent with conntrack.

Fixes: c2ac6673 "openvswitch: Allow matching on conntrack label"
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now send with MSG_PEEK can return data from multiple SKBs.

Unfortunately we take into account the peek offset for each skb,
that is wrong. We need to apply the peek offset only once.

In addition, the peek offset should be used only if MSG_PEEK is set.

Cc: "David S. Miller" <davem@davemloft.net> (maintainer:NETWORKING
Cc: Eric Dumazet <edumazet@google.com> (commit_signer:1/14=7%)
Cc: Aaron Conole <aconole@bytheb.org>
Fixes: 9f389e35 ("af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag")
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Tested-by: Aaron Conole <aconole@bytheb.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Align with other tc actions.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit 1ce87720 ("net: sched: make cls_u32 lockless")
we began to release tc actions in a RCU callback. However,
mirred action relies on RTNL lock to protect the global
mirred_list, therefore we could have a race condition
between RCU callback and netdevice event, which caused
a list corruption as reported by Vinson.

Instead of relying on RTNL lock, introduce a spinlock to
protect this list.

Note, in non-bind case, it is still called with RTNL lock,
therefore should disable BH too.
Reported-by: Vinson Lee <vlee@twopensource.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver still was not offloading TSO on GRE tunnels because
it forgot to set the GSO_GRE flag, causing lots of retransmits.

This fixes generic GRE traffic (like a tunnel added like below)
whereas before it would get 1Gb/s or less, now on a 10G adapter
it gets 8.7Gb/s.

ip ad ad 11.1.0.2/24 dev ens2f0
ip l set ens2f0 up
ip link add gre2 type gretap remote 11.1.0.1 local 11.1.0.2 dev ens2f0
ip l set gre2 up
ip ad ad 192.168.124.2/24 dev gre2
ping 192.168.124.1
netperf -H 192.168.124.1
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2015-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
pull-request: wireless-drivers 2015-10-01

ath9k:

* declare required extra tx headroom

ath10k:

* fix DMA related firmware crashes on multiple devices

rt2800usb:

* add usb ID 1b75:3070 for Airlive WT-2000USB

b43:

* probe bcma core (device) rev 0x15
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There are cases when the created metadata reply is not used. Ensure the
allocated memory is freed also in such cases.

Fixes: 63d008a4 ("ipv4: send arp replies to the correct tunnel")
Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

reqsk_timer_handler() tests if icsk_accept_queue.listen_opt
is NULL at its beginning.

By the time it calls inet_csk_reqsk_queue_drop() and
reqsk_queue_unlink(), listener might have been closed and
inet_csk_listen_stop() had called reqsk_queue_yank_acceptq()
which sets icsk_accept_queue.listen_opt to NULL

We therefore need to correctly check listen_opt being NULL
after holding syn_wait_lock for proper synchronization.

Fixes: fa76ce73 ("inet: get rid of central tcp/dccp listener timer")
Fixes: b357a364 ("inet: fix possible panic in reqsk_queue_unlink()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I’m using the compilation flag -Werror=old-style-declaration, which
requires that the “inline” word would come at the beginning of the code
line.

$ make drivers/net/ethernet/intel/e1000e/e1000e.ko
...
include/net/inet_timewait_sock.h:116:1: error: ‘inline’ is not at
beginning of declaration [-Werror=old-style-declaration]
static void inline inet_twsk_schedule(struct inet_timewait_sock *tw, int
timeo)

include/net/inet_timewait_sock.h:121:1: error: ‘inline’ is not at
beginning of declaration [-Werror=old-style-declaration]
static void inline inet_twsk_reschedule(struct inet_timewait_sock *tw,
int timeo)

Fixes: ed2e9239 ("tcp/dccp: fix timewait races in timer handling")
Signed-off-by: Raanan Avargil <raanan.avargil@intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If common clock framework is configured, the driver generates warnings,
which are fixed by this change:

    WARNING: CPU: 0 PID: 1 at linux/drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4()
    Modules linked in:
    CPU: 0 PID: 1 Comm: swapper Not tainted 4.3.0-rc2+ #141
    Hardware name: LPC32XX SoC (Flattened Device Tree)
    Backtrace:
    [<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c)
    [<>] (show_stack) from [<>] (dump_stack+0x20/0x28)
    [<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8)
    [<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c)
    [<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4)
    [<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38)
    [<>] (clk_enable) from [<>] (lpc_eth_drv_probe+0xfc/0x99c)
    [<>] (lpc_eth_drv_probe) from [<>] (platform_drv_probe+0x50/0xa0)
    [<>] (platform_drv_probe) from [<>] (driver_probe_device+0x18c/0x408)
    [<>] (driver_probe_device) from [<>] (__driver_attach+0x70/0x94)
    [<>] (__driver_attach) from [<>] (bus_for_each_dev+0x74/0x98)
    [<>] (bus_for_each_dev) from [<>] (driver_attach+0x20/0x28)
    [<>] (driver_attach) from [<>] (bus_add_driver+0x11c/0x248)
    [<>] (bus_add_driver) from [<>] (driver_register+0xa4/0xe8)
    [<>] (driver_register) from [<>] (__platform_driver_register+0x50/0x64)
    [<>] (__platform_driver_register) from [<>] (lpc_eth_driver_init+0x18/0x20)
    [<>] (lpc_eth_driver_init) from [<>] (do_one_initcall+0x11c/0x1dc)
    [<>] (do_one_initcall) from [<>] (kernel_init_freeable+0x10c/0x1d4)
    [<>] (kernel_init_freeable) from [<>] (kernel_init+0x10/0xec)
    [<>] (kernel_init) from [<>] (ret_from_fork+0x14/0x24)
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If asix_rx_fixup_internal() fails to allocate rx->ax_skb, it will return
but not clear rx->size. rx points to driver private data. A later call
assumes that nonzero size means ax_skb was allocated and passes a null
ax_skb to skb_put. Changed allocation failure return to clear size first.

Found testing board with AX88772B devices.
Signed-off-by: David B. Robins <linux@davidrobins.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-4.3-20150930' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2015-09-30

this is a pull request of a single patch for 4.3.

The patch is by Stephane Grosjean and add support for the peak OEM PCI card to
the peak_pci driver by adding its device ID.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Added kfree() to avoid the memory leak when debugfs_create_dir() fails.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 2b018d57 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release"),
pppoe_release() calls dev_put(po->pppoe_dev) if sk is in the
PPPOX_ZOMBIE state. But pppoe_flush_dev() can set sk->sk_state to
PPPOX_ZOMBIE _and_ reset po->pppoe_dev to NULL. This leads to the
following oops:

[  570.140800] BUG: unable to handle kernel NULL pointer dereference at 00000000000004e0
[  570.142931] IP: [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe]
[  570.144601] PGD 3d119067 PUD 3dbc1067 PMD 0
[  570.144601] Oops: 0000 [#1] SMP
[  570.144601] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core ip6_udp_tunnel udp_tunnel pppoe pppox ppp_generic slhc loop crc32c_intel ghash_clmulni_intel jitterentropy_rng sha256_generic hmac drbg ansi_cprng aesni_intel aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper acpi_cpufreq evdev serio_raw processor button ext4 crc16 mbcache jbd2 virtio_net virtio_blk virtio_pci virtio_ring virtio
[  570.144601] CPU: 1 PID: 15738 Comm: ppp-apitest Not tainted 4.2.0 #1
[  570.144601] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[  570.144601] task: ffff88003d30d600 ti: ffff880036b60000 task.ti: ffff880036b60000
[  570.144601] RIP: 0010:[<ffffffffa018c701>]  [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe]
[  570.144601] RSP: 0018:ffff880036b63e08  EFLAGS: 00010202
[  570.144601] RAX: 0000000000000000 RBX: ffff880034340000 RCX: 0000000000000206
[  570.144601] RDX: 0000000000000006 RSI: ffff88003d30dd20 RDI: ffff88003d30dd20
[  570.144601] RBP: ffff880036b63e28 R08: 0000000000000001 R09: 0000000000000000
[  570.144601] R10: 00007ffee9b50420 R11: ffff880034340078 R12: ffff8800387ec780
[  570.144601] R13: ffff8800387ec7b0 R14: ffff88003e222aa0 R15: ffff8800387ec7b0
[  570.144601] FS:  00007f5672f48700(0000) GS:ffff88003fc80000(0000) knlGS:0000000000000000
[  570.144601] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  570.144601] CR2: 00000000000004e0 CR3: 0000000037f7e000 CR4: 00000000000406a0
[  570.144601] Stack:
[  570.144601]  ffffffffa018f240 ffff8800387ec780 ffffffffa018f240 ffff8800387ec7b0
[  570.144601]  ffff880036b63e48 ffffffff812caabe ffff880039e4e000 0000000000000008
[  570.144601]  ffff880036b63e58 ffffffff812cabad ffff880036b63ea8 ffffffff811347f5
[  570.144601] Call Trace:
[  570.144601]  [<ffffffff812caabe>] sock_release+0x1a/0x75
[  570.144601]  [<ffffffff812cabad>] sock_close+0xd/0x11
[  570.144601]  [<ffffffff811347f5>] __fput+0xff/0x1a5
[  570.144601]  [<ffffffff811348cb>] ____fput+0x9/0xb
[  570.144601]  [<ffffffff81056682>] task_work_run+0x66/0x90
[  570.144601]  [<ffffffff8100189e>] prepare_exit_to_usermode+0x8c/0xa7
[  570.144601]  [<ffffffff81001a26>] syscall_return_slowpath+0x16d/0x19b
[  570.144601]  [<ffffffff813babb1>] int_ret_from_sys_call+0x25/0x9f
[  570.144601] Code: 48 8b 83 c8 01 00 00 a8 01 74 12 48 89 df e8 8b 27 14 e1 b8 f7 ff ff ff e9 b7 00 00 00 8a 43 12 a8 0b 74 1c 48 8b 83 a8 04 00 00 <48> 8b 80 e0 04 00 00 65 ff 08 48 c7 83 a8 04 00 00 00 00 00 00
[  570.144601] RIP  [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe]
[  570.144601]  RSP <ffff880036b63e08>
[  570.144601] CR2: 00000000000004e0
[  570.200518] ---[ end trace 46956baf17349563 ]---

pppoe_flush_dev() has no reason to override sk->sk_state with
PPPOX_ZOMBIE. pppox_unbind_sock() already sets sk->sk_state to
PPPOX_DEAD, which is the correct state given that sk is unbound and
po->pppoe_dev is NULL.

Fixes: 2b018d57 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release")
Tested-by: Oleksii Berezhniak <core@irc.lg.ua>
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull MMC fixes from Ulf Hansson:
 "Here are some mmc fixes intended for v4.3 rc4:

  MMC core:
   - Allow users of mmc_of_parse() to succeed when CONFIG_GPIOLIB is
     unset
   - Prevent infinite loop of re-tuning for CRC-errors for CMD19 and
     CMD21

   MMC host:
   - pxamci: Fix issues with card detect
   - sunxi: Fix clk-delay settings"

* tag 'mmc-v4.3-rc3' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: core: fix dead loop of mmc_retune
  mmc: pxamci: fix card detect with slot-gpio API
  mmc: sunxi: Fix clk-delay settings
  mmc: core: Don't return an error for CD/WP GPIOs when GPIOLIB is unset

Pull IOVA fixes from David Woodhouse:
 "The main fix here is the first one, fixing the over-allocation of
   size-aligned requests.  The other patches simply make the existing
  IOVA code available to users other than the Intel VT-d driver, with no
  functional change.

  I concede the latter really *should* have been submitted during the
  merge window, but since it's basically risk-free and people are
  waiting to build on top of it and it's my fault I didn't get it in, I
  (and they) would be grateful if you'd take it"

* git://git.infradead.org/intel-iommu:
  iommu: Make the iova library a module
  iommu: iova: Export symbols
  iommu: iova: Move iova cache management to the iova library
  iommu/iova: Avoid over-allocating when size-aligned

Merge misc fixes from Andrew Morton:
 "12 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  dmapool: fix overflow condition in pool_find_page()
  thermal: avoid division by zero in power allocator
  memcg: remove pcp_counter_lock
  kprobes: use _do_fork() in samples to make them work again
  drivers/input/joystick/Kconfig: zhenhua.c needs BITREVERSE
  memcg: make mem_cgroup_read_stat() unsigned
  memcg: fix dirty page migration
  dax: fix NULL pointer in __dax_pmd_fault()
  mm: hugetlbfs: skip shared VMAs when unmapping private pages to satisfy a fault
  mm/slab: fix unexpected index mapping result of kmalloc_size(INDEX_NODE+1)
  userfaultfd: remove kernel header include from uapi header
  arch/x86/include/asm/efi.h: fix build failure

Pull power management and ACPI fixes from Rafael Wysocki:
 "These are fixes mostly, for a few changes made in this cycle (the
  intel_idle driver, the OPP library, the ACPI EC driver, turbostat) and
  for some issues that have just been discovered (ACPI PCI IRQ
  management, PCI power management documentation, turbostat), with a
  couple of cleanups on top of them.

  Specifics:

   - intel_idle driver fixup for the recently added Skylake chips
     support (Len Brown).

   - Operating Performance Points (OPP) library fix related to the
     recently added support for new DT bindings and a fix for a typo in
     a comment (Viresh Kumar, Stephen Boyd).

   - ACPI EC driver fix for a recently introduced memory leak in an
     error code path (Lv Zheng).

   - ACPI PCI IRQ management fix for the issue where an ISA IRQ is
     shared with a PCI device which requires it to be configured in a
     different way and may cause an interrupt storm to happen as a
     result with an extra ACPI SCI IRQ handling simplification on top of
     it (Jiang Liu).

   - Update of the PCI power management documentation that became
     outdated and started to actively confuse the readers to make it
     actually reflect the code (Rafael J Wysocki).

   - turbostat fixes including an IVB Xeon regression fix (related to
     the --debug command line option), Skylake adjustment for the TSC
     running at a frequency that doesn't match the base one exactly, and
     a Knights Landing quirk to account for the fact that it only
     updates APERF and MPERF every 1024 clock cycles plus bumping up the
     turbostat version number (Len Brown, Hubert Chrzaniuk)"

* tag 'pm+acpi-4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  tools/power turbosat: update version number
  tools/power turbostat: SKL: Adjust for TSC difference from base frequency
  tools/power turbostat: KNL workaround for %Busy and Avg_MHz
  tools/power turbostat: IVB Xeon: fix --debug regression
  ACPI / PCI: Remove duplicated penalty on SCI IRQ
  ACPI, PCI, irq: Do not share PCI IRQ with ISA IRQ
  ACPI / EC: Fix a memory leak issue in acpi_ec_query()
  PM / OPP: Fix typo modifcation -> modification
  PCI / PM: Update runtime PM documentation for PCI devices
  PM / OPP: of_property_count_u32_elems() can return errors
  intel_idle: Skylake Client Support - updated

Pull networking fixes from David Miller:

1) Fix regression in SKB partial checksum handling, from Pravin B
   Shalar.

2) Fix VLAN inside of VXLAN handling in i40e driver, from Jesse
   Brandeburg.

3) Cure softlockups during accept() in SCTP, from Karl Heiss.

4) MSG_PEEK should return multiple SKBs worth of data in AF_UNIX, from
   Aaron Conole.

5) IPV6 erroneously ignores output interface specifier in lookup key for
   route lookups, fix from David Ahern.

6) In Marvell DSA driver, forward unknown frames to CPU port, from
   Andrew Lunn.

7) Mission flow flag initializations in some code paths, from David
   Ahern.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net: Initialize flow flags in input path
  net: dsa: fix preparation of a port STP update
  testptp: Silence compiler warnings on ppc64
  net/mlx4: Handle return codes in mlx4_qp_attach_common
  dsa: mv88e6xxx: Enable forwarding for unknown to the CPU port
  skbuff: Fix skb checksum partial check.
  net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set
  net sysfs: Print link speed as signed integer
  bna: fix error handling
  af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag
  af_unix: Convert the unix_sk macro to an inline function for type safety
  net: sctp: Don't use 64 kilobyte lookup table for four elements
  l2tp: protect tunnel->del_work by ref_count
  net/ibm/emac: bump version numbers for correct work with ethtool
  sctp: Prevent soft lockup when sctp_accept() is called during a timeout event
  sctp: Whitespace fix
  i40e/i40evf: check for stopped admin queue
  i40e: fix VLAN inside VXLAN
  r8169: fix handling rtl_readphy result
  net: hisilicon: fix handling platform_get_irq result

If a DMA pool lies at the very top of the dma_addr_t range (as may
happen with an IOMMU involved), the calculated end address of the pool
wraps around to zero, and page lookup always fails.

Tweak the relevant calculation to be overflow-proof.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

During boot I get a div by zero Oops regression starting in v4.3-rc3.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Javi Merino <javi.merino@arm.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 733a572e ("memcg: make mem_cgroup_read_{stat|event}() iterate
possible cpus instead of online") removed the last use of the per memcg
pcp_counter_lock but forgot to remove the variable.

Kill the vestigial variable.
Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 3033f14a ("clone: support passing tls argument via C rather
than pt_regs magic") introduced _do_fork() that allowed to pass @tls
parameter.

The old do_fork() is defined only for architectures that are not ready
to use this way and do not define HAVE_COPY_THREAD_TLS.

Let's use _do_fork() in the kprobe examples to make them work again on
all architectures.
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thiago Macieira <thiago.macieira@intel.com>
Cc: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It uses bitrev8(), so it must ensure that lib/bitrev.o gets included in
vmlinux.

Cc: Fengguang Wu <fengguang.wu@gmail.com>
Cc: yalin wang <yalin.wang2010@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mem_cgroup_read_stat() returns a page count by summing per cpu page
counters.  The summing is racy wrt.  updates, so a transient negative
sum is possible.  Callers don't want negative values:

 - mem_cgroup_wb_stats() doesn't want negative nr_dirty or nr_writeback.
   This could confuse dirty throttling.

 - oom reports and memory.stat shouldn't show confusing negative usage.

 - tree_usage() already avoids negatives.

Avoid returning negative page counts from mem_cgroup_read_stat() and
convert it to unsigned.

[akpm@linux-foundation.org: fix old typo while we're in there]
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>	[4.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The problem starts with a file backed dirty page which is charged to a
memcg.  Then page migration is used to move oldpage to newpage.

Migration:
 - copies the oldpage's data to newpage
 - clears oldpage.PG_dirty
 - sets newpage.PG_dirty
 - uncharges oldpage from memcg
 - charges newpage to memcg

Clearing oldpage.PG_dirty decrements the charged memcg's dirty page
count.

However, because newpage is not yet charged, setting newpage.PG_dirty
does not increment the memcg's dirty page count.  After migration
completes newpage.PG_dirty is eventually cleared, often in
account_page_cleaned().  At this time newpage is charged to a memcg so
the memcg's dirty page count is decremented which causes underflow
because the count was not previously incremented by migration.  This
underflow causes balance_dirty_pages() to see a very large unsigned
number of dirty memcg pages which leads to aggressive throttling of
buffered writes by processes in non root memcg.

This issue:
 - can harm performance of non root memcg buffered writes.
 - can report too small (even negative) values in
   memory.stat[(total_)dirty] counters of all memcg, including the root.

To avoid polluting migrate.c with #ifdef CONFIG_MEMCG checks, introduce
page_memcg() and set_page_memcg() helpers.

Test:
    0) setup and enter limited memcg
    mkdir /sys/fs/cgroup/test
    echo 1G > /sys/fs/cgroup/test/memory.limit_in_bytes
    echo $$ > /sys/fs/cgroup/test/cgroup.procs

    1) buffered writes baseline
    dd if=/dev/zero of=/data/tmp/foo bs=1M count=1k
    sync
    grep ^dirty /sys/fs/cgroup/test/memory.stat

    2) buffered writes with compaction antagonist to induce migration
    yes 1 > /proc/sys/vm/compact_memory &
    rm -rf /data/tmp/foo
    dd if=/dev/zero of=/data/tmp/foo bs=1M count=1k
    kill %
    sync
    grep ^dirty /sys/fs/cgroup/test/memory.stat

    3) buffered writes without antagonist, should match baseline
    rm -rf /data/tmp/foo
    dd if=/dev/zero of=/data/tmp/foo bs=1M count=1k
    sync
    grep ^dirty /sys/fs/cgroup/test/memory.stat

                       (speed, dirty residue)
             unpatched                       patched
    1) 841 MB/s 0 dirty pages          886 MB/s 0 dirty pages
    2) 611 MB/s -33427456 dirty pages  793 MB/s 0 dirty pages
    3) 114 MB/s -33427456 dirty pages  891 MB/s 0 dirty pages

    Notice that unpatched baseline performance (1) fell after
    migration (3): 841 -> 114 MB/s.  In the patched kernel, post
    migration performance matches baseline.

Fixes: c4843a75 ("memcg: add per cgroup dirty page accounting")
Signed-off-by: Greg Thelen <gthelen@google.com>
Reported-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>	[4.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 46c043ed ("mm: take i_mmap_lock in unmap_mapping_range() for
DAX") moved some code in __dax_pmd_fault() that was responsible for
zeroing newly allocated PMD pages.  The new location didn't properly set
up 'kaddr', so when run this code resulted in a NULL pointer BUG.

Fix this by getting the correct 'kaddr' via bdev_direct_access().
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SunDong reported the following on

  https://bugzilla.kernel.org/show_bug.cgi?id=103841

	I think I find a linux bug, I have the test cases is constructed. I
	can stable recurring problems in fedora22(4.0.4) kernel version,
	arch for x86_64.  I construct transparent huge page, when the parent
	and child process with MAP_SHARE, MAP_PRIVATE way to access the same
	huge page area, it has the opportunity to lead to huge page copy on
	write failure, and then it will munmap the child corresponding mmap
	area, but then the child mmap area with VM_MAYSHARE attributes, child
	process munmap this area can trigger VM_BUG_ON in set_vma_resv_flags
	functions (vma - > vm_flags & VM_MAYSHARE).

There were a number of problems with the report (e.g.  it's hugetlbfs that
triggers this, not transparent huge pages) but it was fundamentally
correct in that a VM_BUG_ON in set_vma_resv_flags() can be triggered that
looks like this

	 vma ffff8804651fd0d0 start 00007fc474e00000 end 00007fc475e00000
	 next ffff8804651fd018 prev ffff8804651fd188 mm ffff88046b1b1800
	 prot 8000000000000027 anon_vma           (null) vm_ops ffffffff8182a7a0
	 pgoff 0 file ffff88106bdb9800 private_data           (null)
	 flags: 0x84400fb(read|write|shared|mayread|maywrite|mayexec|mayshare|dontexpand|hugetlb)
	 ------------
	 kernel BUG at mm/hugetlb.c:462!
	 SMP
	 Modules linked in: xt_pkttype xt_LOG xt_limit [..]
	 CPU: 38 PID: 26839 Comm: map Not tainted 4.0.4-default #1
	 Hardware name: Dell Inc. PowerEdge R810/0TT6JF, BIOS 2.7.4 04/26/2012
	 set_vma_resv_flags+0x2d/0x30

The VM_BUG_ON is correct because private and shared mappings have
different reservation accounting but the warning clearly shows that the
VMA is shared.

When a private COW fails to allocate a new page then only the process
that created the VMA gets the page -- all the children unmap the page.
If the children access that data in the future then they get killed.

The problem is that the same file is mapped shared and private.  During
the COW, the allocation fails, the VMAs are traversed to unmap the other
private pages but a shared VMA is found and the bug is triggered.  This
patch identifies such VMAs and skips them.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: SunDong <sund_sky@126.com>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Rientjes <rientjes@google.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>