- 03 Feb, 2020 5 commits
-
-
Paolo Valente authored
ifdefs around gets and puts of bfq groups reduce readability, remove them. Tested-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Reported-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Paolo Valente authored
The flag on_st in the bfq_entity data structure is true if the entity is on a service tree or is in service. Yet the name of the field, confusingly, does not mention the second, very important case. Extend the name to mention the second case too. Tested-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Paolo Valente authored
In bfq_bfqq_move(), the bfq_queue, say Q, to be moved to a new group may happen to be deactivated in the scheduling data structures of the source group (and then activated in the destination group). If Q is referred only by the data structures in the source group when the deactivation happens, then Q is freed upon the deactivation. This commit addresses this issue by getting an extra reference before the possible deactivation, and releasing this extra reference after Q has been moved. Tested-by:
Chris Evich <cevich@redhat.com> Tested-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Paolo Valente authored
BFQ maintains an ordered list, implemented with an RB tree, of head-request positions of non-empty bfq_queues. This position tree, inherited from CFQ, is used to find bfq_queues that contain I/O close to each other. BFQ merges these bfq_queues into a single shared queue, if this boosts throughput on the device at hand. There is however a special-purpose bfq_queue that does not participate in queue merging, the oom bfq_queue. Yet, also this bfq_queue could be wrongly added to the position tree. So bfqq_find_close() could return the oom bfq_queue, which is a source of further troubles in an out-of-memory situation. This commit prevents the oom bfq_queue from being inserted into the position tree. Tested-by:
Patrick Dung <patdung100@gmail.com> Tested-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Paolo Valente authored
Commit 478de338 ("block, bfq: deschedule empty bfq_queues not referred by any process") fixed commit 3726112e ("block, bfq: re-schedule empty queues if they deserve I/O plugging") by descheduling an empty bfq_queue when it remains with not process reference. Yet, this still left a case uncovered: an empty bfq_queue with not process reference that remains in service. This happens for an in-service sync bfq_queue that is deemed to deserve I/O-dispatch plugging when it remains empty. Yet no new requests will arrive for such a bfq_queue if no process sends requests to it any longer. Even worse, the bfq_queue may happen to be prematurely freed while still in service (because there may remain no reference to it any longer). This commit solves this problem by preventing I/O dispatch from being plugged for the in-service bfq_queue, if the latter has no process reference (the bfq_queue is then prevented from remaining in service). Fixes: 3726112e ("block, bfq: re-schedule empty queues if they deserve I/O plugging") Tested-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Reported-by:
Patrick Dung <patdung100@gmail.com> Tested-by:
Patrick Dung <patdung100@gmail.com> Signed-off-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 01 Feb, 2020 5 commits
-
-
Coly Li authored
Now if prio_read() failed during starting a cache set, we can print out error message in run_cache_set() and handle the failure properly. Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Coly Li authored
Dan Carpenter points out that from commit 2aa8c529 ("bcache: avoid unnecessary btree nodes flushing in btree_flush_write()"), there is a incorrect data type usage which leads to the following static checker warning: drivers/md/bcache/journal.c:444 btree_flush_write() warn: 'ref_nr' unsigned <= 0 drivers/md/bcache/journal.c 422 static void btree_flush_write(struct cache_set *c) 423 { 424 struct btree *b, *t, *btree_nodes[BTREE_FLUSH_NR]; 425 unsigned int i, nr, ref_nr; ^^^^^^ 426 atomic_t *fifo_front_p, *now_fifo_front_p; 427 size_t mask; 428 429 if (c->journal.btree_flushing) 430 return; 431 432 spin_lock(&c->journal.flush_write_lock); 433 if (c->journal.btree_flushing) { 434 spin_unlock(&c->journal.flush_write_lock); 435 return; 436 } 437 c->journal.btree_flushing = true; 438 spin_unlock(&c->journal.flush_write_lock); 439 440 /* get the oldest journal entry and check its refcount */ 441 spin_lock(&c->journal.lock); 442 fifo_front_p = &fifo_front(&c->journal.pin); 443 ref_nr = atomic_read(fifo_front_p); 444 if (ref_nr <= 0) { ^^^^^^^^^^^ Unsigned can't be less than zero. 445 /* 446 * do nothing if no btree node references 447 * the oldest journal entry 448 */ 449 spin_unlock(&c->journal.lock); 450 goto out; 451 } 452 spin_unlock(&c->journal.lock); As the warning information indicates, local varaible ref_nr in unsigned int type is wrong, which does not matche atomic_read() and the "<= 0" checking. This patch fixes the above error by defining local variable ref_nr as int type. Fixes: 2aa8c529 ("bcache: avoid unnecessary btree nodes flushing in btree_flush_write()") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Coly Li authored
In year 2007 high performance SSD was still expensive, in order to save more space for real workload or meta data, the readahead I/Os for non-meta data was bypassed and not cached on SSD. In now days, SSD price drops a lot and people can find larger size SSD with more comfortable price. It is unncessary to alway bypass normal readahead I/Os to save SSD space for now. This patch adds options for readahead data cache policies via sysfs file /sys/block/bcache<N>/readahead_cache_policy, the options are, - "all": cache all readahead data I/Os. - "meta-only": only cache meta data, and bypass other regular I/Os. If users want to make bcache continue to only cache readahead request for metadata and bypass regular data readahead, please set "meta-only" to this sysfs file. By default, bcache will back to cache all read- ahead requests now. Cc: stable@vger.kernel.org Signed-off-by:
Coly Li <colyli@suse.de> Acked-by:
Eric Wheeler <bcache@linux.ewheeler.net> Cc: Michael Lyle <mlyle@lyle.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Coly Li authored
In bset.h, macro bset_bkey_last() is defined as, bkey_idx((struct bkey *) (i)->d, (i)->keys) Parameter i can be variable type of data structure, the macro always works once the type of struct i has member 'd' and 'keys'. bset_bkey_last() is also used in macro csum_set() to calculate the checksum of a on-disk data structure. When csum_set() is used to calculate checksum of on-disk bcache super block, the parameter 'i' data type is struct cache_sb_disk. Inside struct cache_sb_disk (also in struct cache_sb) the member keys is __u16 type. But bkey_idx() expects unsigned int (a 32bit width), so there is problem when sending parameters via stack to call bkey_idx(). Sparse tool from Intel 0day kbuild system reports this incompatible problem. bkey_idx() is part of user space API, so the simplest fix is to cast the (i)->keys to unsigned int type in macro bset_bkey_last(). Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Coly Li authored
Commit 83ff9318 ("bcache: not use hard coded memset size in bch_cache_accounting_clear()") tries to make the code more easy to understand by removing the hard coded number with following change, void bch_cache_accounting_clear(...) { memset(&acc->total.cache_hits, 0, - sizeof(unsigned long) * 7); + sizeof(struct cache_stats)); } Unfortunately the change was wrong (it also tells us the original code was not easy to correctly understand). The hard coded number 7 is used because in struct cache_stats, 15 struct cache_stats { 16 struct kobject kobj; 17 18 unsigned long cache_hits; 19 unsigned long cache_misses; 20 unsigned long cache_bypass_hits; 21 unsigned long cache_bypass_misses; 22 unsigned long cache_readaheads; 23 unsigned long cache_miss_collisions; 24 unsigned long sectors_bypassed; 25 26 unsigned int rescale; 27 }; only members in LINE 18-24 want to be set to 0. It is wrong to use 'sizeof(struct cache_stats)' to replace 'sizeof(unsigned long) * 7), the memory objects behind acc->total is staled by this change. Сорокин Артем Сергеевич reports that by the following steps, kernel panic will be triggered, 1. Create new set: make-bcache -B /dev/nvme1n1 -C /dev/sda --wipe-bcache 2. Run in /sys/fs/bcache/<uuid>: echo 1 > clear_stats && cat stats_five_minute/cache_bypass_hits I can reproduce the panic and get following dmesg with KASAN enabled, [22613.172742] ================================================================== [22613.172862] BUG: KASAN: null-ptr-deref in sysfs_kf_seq_show+0x117/0x230 [22613.172864] Read of size 8 at addr 0000000000000000 by task cat/6753 [22613.172870] CPU: 1 PID: 6753 Comm: cat Not tainted 5.5.0-rc7-lp151.28.16-default+ #11 [22613.172872] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/29/2019 [22613.172873] Call Trace: [22613.172964] dump_stack+0x8b/0xbb [22613.172968] ? sysfs_kf_seq_show+0x117/0x230 [22613.172970] ? sysfs_kf_seq_show+0x117/0x230 [22613.173031] __kasan_report+0x176/0x192 [22613.173064] ? pr_cont_kernfs_name+0x40/0x60 [22613.173067] ? sysfs_kf_seq_show+0x117/0x230 [22613.173070] kasan_report+0xe/0x20 [22613.173072] sysfs_kf_seq_show+0x117/0x230 [22613.173105] seq_read+0x199/0x6d0 [22613.173110] vfs_read+0xa5/0x1a0 [22613.173113] ksys_read+0x110/0x160 [22613.173115] ? kernel_write+0xb0/0xb0 [22613.173177] do_syscall_64+0x77/0x290 [22613.173238] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [22613.173241] RIP: 0033:0x7fc2c886ac61 [22613.173244] Code: fe ff ff 48 8d 3d c7 a0 09 00 48 83 ec 08 e8 46 03 02 00 66 0f 1f 44 00 00 8b 05 ca fb 2c 00 48 63 ff 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 55 53 48 89 d5 48 89 [22613.173245] RSP: 002b:00007ffebe776d68 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [22613.173248] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fc2c886ac61 [22613.173249] RDX: 0000000000020000 RSI: 00007fc2c8cca000 RDI: 0000000000000003 [22613.173250] RBP: 0000000000020000 R08: ffffffffffffffff R09: 0000000000000000 [22613.173251] R10: 000000000000038c R11: 0000000000000246 R12: 00007fc2c8cca000 [22613.173253] R13: 0000000000000003 R14: 00007fc2c8cca00f R15: 0000000000020000 [22613.173255] ================================================================== [22613.173256] Disabling lock debugging due to kernel taint [22613.173350] BUG: kernel NULL pointer dereference, address: 0000000000000000 [22613.178380] #PF: supervisor read access in kernel mode [22613.180959] #PF: error_code(0x0000) - not-present page [22613.183444] PGD 0 P4D 0 [22613.184867] Oops: 0000 [#1] SMP KASAN PTI [22613.186797] CPU: 1 PID: 6753 Comm: cat Tainted: G B 5.5.0-rc7-lp151.28.16-default+ #11 [22613.191253] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/29/2019 [22613.196706] RIP: 0010:sysfs_kf_seq_show+0x117/0x230 [22613.199097] Code: ff 48 8b 0b 48 8b 44 24 08 48 01 e9 eb a6 31 f6 48 89 cf ba 00 10 00 00 48 89 4c 24 10 e8 b1 e6 e9 ff 4c 89 ff e8 19 07 ea ff <49> 8b 07 48 85 c0 48 89 44 24 08 0f 84 91 00 00 00 49 8b 6d 00 48 [22613.208016] RSP: 0018:ffff8881d4f8fd78 EFLAGS: 00010246 [22613.210448] RAX: 0000000000000000 RBX: ffff8881eb99b180 RCX: ffffffff810d9ef6 [22613.213691] RDX: 0000000000000001 RSI: 0000000000000246 RDI: 0000000000000246 [22613.216893] RBP: 0000000000001000 R08: fffffbfff072ddcd R09: fffffbfff072ddcd [22613.220075] R10: 0000000000000001 R11: fffffbfff072ddcc R12: ffff8881de5c0200 [22613.223256] R13: ffff8881ed175500 R14: ffff8881eb99b198 R15: 0000000000000000 [22613.226290] FS: 00007fc2c8d3d500(0000) GS:ffff8881f2a80000(0000) knlGS:0000000000000000 [22613.229637] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [22613.231993] CR2: 0000000000000000 CR3: 00000001ec89a004 CR4: 00000000003606e0 [22613.234909] Call Trace: [22613.235931] seq_read+0x199/0x6d0 [22613.237259] vfs_read+0xa5/0x1a0 [22613.239229] ksys_read+0x110/0x160 [22613.240590] ? kernel_write+0xb0/0xb0 [22613.242040] do_syscall_64+0x77/0x290 [22613.243625] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [22613.245450] RIP: 0033:0x7fc2c886ac61 [22613.246706] Code: fe ff ff 48 8d 3d c7 a0 09 00 48 83 ec 08 e8 46 03 02 00 66 0f 1f 44 00 00 8b 05 ca fb 2c 00 48 63 ff 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 55 53 48 89 d5 48 89 [22613.253296] RSP: 002b:00007ffebe776d68 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [22613.255835] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fc2c886ac61 [22613.258472] RDX: 0000000000020000 RSI: 00007fc2c8cca000 RDI: 0000000000000003 [22613.260807] RBP: 0000000000020000 R08: ffffffffffffffff R09: 0000000000000000 [22613.263188] R10: 000000000000038c R11: 0000000000000246 R12: 00007fc2c8cca000 [22613.265598] R13: 0000000000000003 R14: 00007fc2c8cca00f R15: 0000000000020000 [22613.268729] Modules linked in: scsi_transport_iscsi af_packet iscsi_ibft iscsi_boot_sysfs vmw_vsock_vmci_transport vsock fuse bnep kvm_intel kvm irqbypass crc32_pclmul crc32c_intel ghash_clmulni_intel snd_ens1371 snd_ac97_codec ac97_bus bcache snd_pcm btusb btrtl btbcm btintel crc64 aesni_intel glue_helper crypto_simd vmw_balloon cryptd bluetooth snd_timer snd_rawmidi snd joydev pcspkr e1000 rfkill vmw_vmci soundcore ecdh_generic ecc gameport i2c_piix4 mptctl ac button hid_generic usbhid sr_mod cdrom ata_generic ehci_pci vmwgfx uhci_hcd drm_kms_helper syscopyarea serio_raw sysfillrect sysimgblt fb_sys_fops ttm ehci_hcd mptspi scsi_transport_spi mptscsih ata_piix mptbase ahci usbcore libahci drm sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua [22613.292429] CR2: 0000000000000000 [22613.293563] ---[ end trace a074b26a8508f378 ]--- [22613.295138] RIP: 0010:sysfs_kf_seq_show+0x117/0x230 [22613.296769] Code: ff 48 8b 0b 48 8b 44 24 08 48 01 e9 eb a6 31 f6 48 89 cf ba 00 10 00 00 48 89 4c 24 10 e8 b1 e6 e9 ff 4c 89 ff e8 19 07 ea ff <49> 8b 07 48 85 c0 48 89 44 24 08 0f 84 91 00 00 00 49 8b 6d 00 48 [22613.303553] RSP: 0018:ffff8881d4f8fd78 EFLAGS: 00010246 [22613.305280] RAX: 0000000000000000 RBX: ffff8881eb99b180 RCX: ffffffff810d9ef6 [22613.307924] RDX: 0000000000000001 RSI: 0000000000000246 RDI: 0000000000000246 [22613.310272] RBP: 0000000000001000 R08: fffffbfff072ddcd R09: fffffbfff072ddcd [22613.312685] R10: 0000000000000001 R11: fffffbfff072ddcc R12: ffff8881de5c0200 [22613.315076] R13: ffff8881ed175500 R14: ffff8881eb99b198 R15: 0000000000000000 [22613.318116] FS: 00007fc2c8d3d500(0000) GS:ffff8881f2a80000(0000) knlGS:0000000000000000 [22613.320743] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [22613.322628] CR2: 0000000000000000 CR3: 00000001ec89a004 CR4: 00000000003606e0 Here this patch fixes the following problem by explicity set all the 7 members to 0 in bch_cache_accounting_clear(). Reported-by:
Сорокин Артем Сергеевич <a.sorokin@bank-hlynov.ru> Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 30 Jan, 2020 4 commits
-
-
Juergen Gross authored
Today the Xen blkfront driver allocates memory for one struct blkfront_ring_info for each communication ring. This structure is statically sized for the maximum supported configuration resulting in a size of more than 90 kB. As the main size contributor is one array inside the struct, the memory allocation can easily be limited by moving this array to be the last structure element and to allocate only the memory for the actually needed array size. Acked-by:
Roger Pau Monné <roger.pau@citrix.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Sun Ke authored
When kzalloc fail, may cause trying to destroy the workqueue from inside the workqueue. If num_connections is m (2 < m), and NO.1 ~ NO.n (1 < n < m) kzalloc are successful. The NO.(n + 1) failed. Then, nbd_start_device will return ENOMEM to nbd_start_device_ioctl, and nbd_start_device_ioctl will return immediately without running flush_workqueue. However, we still have n recv threads. If nbd_release run first, recv threads may have to drop the last config_refs and try to destroy the workqueue from inside the workqueue. To fix it, add a flush_workqueue in nbd_start_device. Fixes: e9e006f5 ("nbd: fix max number of supported devs") Signed-off-by:
Sun Ke <sunke32@huawei.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Stephen Kitt authored
Switching to struct_size for the allocation in fifo_alloc avoids hard-coding the type of fifo_buffer.values in fifo_alloc. It also provides overflow protection; to avoid pessimistic code being generated by the compiler as a result, this patch also switches fifo_size to unsigned, propagating the change as appropriate. Reviewed-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
Stephen Kitt <steve@sk2.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Jon Derrick authored
Scott hasn't worked for Intel for some time and has already given us his blessing. CC: Scott Bauer <sbauer@plzdonthack.me> Signed-off-by:
Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by:
Jon Derrick <jonathan.derrick@intel.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 29 Jan, 2020 26 commits
-
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation updates from Jonathan Corbet: "It has been a relatively quiet cycle for documentation, but there's still a couple of things of note: - Conversion of the NFS documentation to RST - A new document on how to help with documentation (and a maintainer profile entry too) Plus the usual collection of typo fixes, etc" * tag 'docs-5.6' of git://git.lwn.net/linux: (40 commits) docs: filesystems: add overlayfs to index.rst docs: usb: remove some broken references scripts/find-unused-docs: Fix massive false positives docs: nvdimm: use ReST notation for subsection zram: correct documentation about sysfs node of huge page writeback Documentation: zram: various fixes in zram.rst Add a maintainer entry profile for documentation Add a document on how to contribute to the documentation docs: Keep up with the location of NoUri Documentation: Call out example SYM_FUNC_* usage as x86-specific Documentation: nfs: fault_injection: convert to ReST Documentation: nfs: pnfs-scsi-server: convert to ReST Documentation: nfs: convert pnfs-block-server to ReST Documentation: nfs: idmapper: convert to ReST Documentation: convert nfsd-admin-interfaces to ReST Documentation: nfs-rdma: convert to ReST Documentation: nfsroot.rst: COSMETIC: refill a paragraph Documentation: nfsroot.txt: convert to ReST Documentation: convert nfs.txt to ReST Documentation: filesystems: convert vfat.txt to RST ...
-
Linus Torvalds authored
Merge tag 'linux-kselftest-5.6-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest kunit updates from Shuah Khan: "This kunit update consists of: - Support for building kunit as a module from Alan Maguire - AppArmor KUnit tests for policy unpack from Mike Salvatore" * tag 'linux-kselftest-5.6-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: building kunit as a module breaks allmodconfig kunit: update documentation to describe module-based build kunit: allow kunit to be loaded as a module kunit: remove timeout dependence on sysctl_hung_task_timeout_seconds kunit: allow kunit tests to be loaded as a module kunit: hide unexported try-catch interface in try-catch-impl.h kunit: move string-stream.h to lib/kunit apparmor: add AppArmor KUnit tests for policy unpack
-
Linus Torvalds authored
Merge tag 'linux-kselftest-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest update from Shuah Khan: "This Kselftest update consists of several fixes to framework and individual tests. In addition, it enables LKDTM tests adding lkdtm target to kselftest Makefile" * tag 'linux-kselftest-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ftrace: fix glob selftest selftests: settings: tests can be in subsubdirs kselftest: Minimise dependency of get_size on C library interfaces selftests/livepatch: Remove unused local variable in set_ftrace_enabled() selftests/livepatch: Replace set_dynamic_debug() with setup_config() in README selftests/lkdtm: Add tests for LKDTM targets selftests: Uninitialized variable in test_cgcore_proc_migration() selftests: fix build behaviour on targets' failures
-
Linus Torvalds authored
Merge tag 'y2038-drivers-for-v5.6-signed' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull y2038 updates from Arnd Bergmann: "Core, driver and file system changes These are updates to device drivers and file systems that for some reason or another were not included in the kernel in the previous y2038 series. I've gone through all users of time_t again to make sure the kernel is in a long-term maintainable state, replacing all remaining references to time_t with safe alternatives. Some related parts of the series were picked up into the nfsd, xfs, alsa and v4l2 trees. A final set of patches in linux-mm removes the now unused time_t/timeval/timespec types and helper functions after all five branches are merged for linux-5.6, ensuring that no new users get merged. As a result, linux-5.6, or my backport of the patches to 5.4 [1], should be the first release that can serve as a base for a 32-bit system designed to run beyond year 2038, with a few remaining caveats: - All user space must be compiled with a 64-bit time_t, which will be supported in the coming musl-1.2 and glibc-2.32 releases, along with installed kernel headers from linux-5.6 or higher. - Applications that use the system call interfaces directly need to be ported to use the time64 syscalls added in linux-5.1 in place of the existing system calls. This impacts most users of futex() and seccomp() as well as programming languages that have their own runtime environment not based on libc. - Applications that use a private copy of kernel uapi header files or their contents may need to update to the linux-5.6 version, in particular for sound/asound.h, xfs/xfs_fs.h, linux/input.h, linux/elfcore.h, linux/sockios.h, linux/timex.h and linux/can/bcm.h. - A few remaining interfaces cannot be changed to pass a 64-bit time_t in a compatible way, so they must be configured to use CLOCK_MONOTONIC times or (with a y2106 problem) unsigned 32-bit timestamps. Most importantly this impacts all users of 'struct input_event'. - All y2038 problems that are present on 64-bit machines also apply to 32-bit machines. In particular this affects file systems with on-disk timestamps using signed 32-bit seconds: ext4 with ext3-style small inodes, ext2, xfs (to be fixed soon) and ufs" [1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git/log/?h=y2038-endgame * tag 'y2038-drivers-for-v5.6-signed' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (21 commits) Revert "drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC" y2038: sh: remove timeval/timespec usage from headers y2038: sparc: remove use of struct timex y2038: rename itimerval to __kernel_old_itimerval y2038: remove obsolete jiffies conversion functions nfs: fscache: use timespec64 in inode auxdata nfs: fix timstamp debug prints nfs: use time64_t internally sunrpc: convert to time64_t for expiry drm/etnaviv: avoid deprecated timespec drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC drm/msm: avoid using 'timespec' hfs/hfsplus: use 64-bit inode timestamps hostfs: pass 64-bit timestamps to/from user space packet: clarify timestamp overflow tsacct: add 64-bit btime field acct: stop using get_seconds() um: ubd: use 64-bit time_t where possible xtensa: ISS: avoid struct timeval dlm: use SO_SNDTIMEO_NEW instead of SO_SNDTIMEO_OLD ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printkLinus Torvalds authored
Pull printk update from Petr Mladek: "Prevent replaying log on all consoles" * tag 'printk-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: printk: fix exclusive_console replaying
-
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofsLinus Torvalds authored
Pull erofs updates from Gao Xiang: "A regression fix, several cleanups and (maybe) plus an upcoming new mount api convert patch as a part of vfs update are considered available for this cycle. All commits have been in linux-next and tested with no smoke out. Summary: - fix an out-of-bound read access introduced in v5.3, which could rarely cause data corruption - various cleanup patches" * tag 'erofs-for-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: clean up z_erofs_submit_queue() erofs: fold in postsubmit_is_all_bypassed() erofs: fix out-of-bound read for shifted uncompressed block erofs: remove void tagging/untagging of workgroup pointers erofs: remove unused tag argument while registering a workgroup erofs: remove unused tag argument while finding a workgroup erofs: correct indentation of an assigned structure inside a function
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull adfs updates from Al Viro: "adfs stuff for this cycle" * 'work.adfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (42 commits) fs/adfs: bigdir: Fix an error code in adfs_fplus_read() Documentation: update adfs filesystem documentation fs/adfs: mostly divorse inode number from indirect disc address fs/adfs: super: add support for E and E+ floppy image formats fs/adfs: super: extract filesystem block probe fs/adfs: dir: remove debug in adfs_dir_update() fs/adfs: super: fix inode dropping fs/adfs: bigdir: implement directory update support fs/adfs: bigdir: calculate and validate directory checkbyte fs/adfs: bigdir: directory validation strengthening fs/adfs: bigdir: extract directory validation fs/adfs: bigdir: factor out directory entry offset calculation fs/adfs: newdir: split out directory commit from update fs/adfs: newdir: clean up adfs_f_update() fs/adfs: newdir: merge adfs_dir_read() into adfs_f_read() fs/adfs: newdir: improve directory validation fs/adfs: newdir: factor out directory format validation fs/adfs: dir: use pointers to access directory head/tails fs/adfs: dir: add more efficient iterate() per-format method fs/adfs: dir: switch to iterate_shared method ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull openat2 support from Al Viro: "This is the openat2() series from Aleksa Sarai. I'm afraid that the rest of namei stuff will have to wait - it got zero review the last time I'd posted #work.namei, and there had been a leak in the posted series I'd caught only last weekend. I was going to repost it on Monday, but the window opened and the odds of getting any review during that... Oh, well. Anyway, openat2 part should be ready; that _did_ get sane amount of review and public testing, so here it comes" From Aleksa's description of the series: "For a very long time, extending openat(2) with new features has been incredibly frustrating. This stems from the fact that openat(2) is possibly the most famous counter-example to the mantra "don't silently accept garbage from userspace" -- it doesn't check whether unknown flags are present[1]. This means that (generally) the addition of new flags to openat(2) has been fraught with backwards-compatibility issues (O_TMPFILE has to be defined as __O_TMPFILE|O_DIRECTORY|[O_RDWR or O_WRONLY] to ensure old kernels gave errors, since it's insecure to silently ignore the flag[2]). All new security-related flags therefore have a tough road to being added to openat(2). Furthermore, the need for some sort of control over VFS's path resolution (to avoid malicious paths resulting in inadvertent breakouts) has been a very long-standing desire of many userspace applications. This patchset is a revival of Al Viro's old AT_NO_JUMPS[3] patchset (which was a variant of David Drysdale's O_BENEATH patchset[4] which was a spin-off of the Capsicum project[5]) with a few additions and changes made based on the previous discussion within [6] as well as others I felt were useful. In line with the conclusions of the original discussion of AT_NO_JUMPS, the flag has been split up into separate flags. However, instead of being an openat(2) flag it is provided through a new syscall openat2(2) which provides several other improvements to the openat(2) interface (see the patch description for more details). The following new LOOKUP_* flags are added: LOOKUP_NO_XDEV: Blocks all mountpoint crossings (upwards, downwards, or through absolute links). Absolute pathnames alone in openat(2) do not trigger this. Magic-link traversal which implies a vfsmount jump is also blocked (though magic-link jumps on the same vfsmount are permitted). LOOKUP_NO_MAGICLINKS: Blocks resolution through /proc/$pid/fd-style links. This is done by blocking the usage of nd_jump_link() during resolution in a filesystem. The term "magic-links" is used to match with the only reference to these links in Documentation/, but I'm happy to change the name. It should be noted that this is different to the scope of ~LOOKUP_FOLLOW in that it applies to all path components. However, you can do openat2(NO_FOLLOW|NO_MAGICLINKS) on a magic-link and it will *not* fail (assuming that no parent component was a magic-link), and you will have an fd for the magic-link. In order to correctly detect magic-links, the introduction of a new LOOKUP_MAGICLINK_JUMPED state flag was required. LOOKUP_BENEATH: Disallows escapes to outside the starting dirfd's tree, using techniques such as ".." or absolute links. Absolute paths in openat(2) are also disallowed. Conceptually this flag is to ensure you "stay below" a certain point in the filesystem tree -- but this requires some additional to protect against various races that would allow escape using "..". Currently LOOKUP_BENEATH implies LOOKUP_NO_MAGICLINKS, because it can trivially beam you around the filesystem (breaking the protection). In future, there might be similar safety checks done as in LOOKUP_IN_ROOT, but that requires more discussion. In addition, two new flags are added that expand on the above ideas: LOOKUP_NO_SYMLINKS: Does what it says on the tin. No symlink resolution is allowed at all, including magic-links. Just as with LOOKUP_NO_MAGICLINKS this can still be used with NOFOLLOW to open an fd for the symlink as long as no parent path had a symlink component. LOOKUP_IN_ROOT: This is an extension of LOOKUP_BENEATH that, rather than blocking attempts to move past the root, forces all such movements to be scoped to the starting point. This provides chroot(2)-like protection but without the cost of a chroot(2) for each filesystem operation, as well as being safe against race attacks that chroot(2) is not. If a race is detected (as with LOOKUP_BENEATH) then an error is generated, and similar to LOOKUP_BENEATH it is not permitted to cross magic-links with LOOKUP_IN_ROOT. The primary need for this is from container runtimes, which currently need to do symlink scoping in userspace[7] when opening paths in a potentially malicious container. There is a long list of CVEs that could have bene mitigated by having RESOLVE_THIS_ROOT (such as CVE-2017-1002101, CVE-2017-1002102, CVE-2018-15664, and CVE-2019-5736, just to name a few). In order to make all of the above more usable, I'm working on libpathrs[8] which is a C-friendly library for safe path resolution. It features a userspace-emulated backend if the kernel doesn't support openat2(2). Hopefully we can get userspace to switch to using it, and thus get openat2(2) support for free once it's ready. Future work would include implementing things like RESOLVE_NO_AUTOMOUNT and possibly a RESOLVE_NO_REMOTE (to allow programs to be sure they don't hit DoSes though stale NFS handles)" * 'work.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Documentation: path-lookup: include new LOOKUP flags selftests: add openat2(2) selftests open: introduce openat2(2) syscall namei: LOOKUP_{IN_ROOT,BENEATH}: permit limited ".." resolution namei: LOOKUP_IN_ROOT: chroot-like scoped resolution namei: LOOKUP_BENEATH: O_BENEATH-like scoped resolution namei: LOOKUP_NO_XDEV: block mountpoint crossing namei: LOOKUP_NO_MAGICLINKS: block magic-link resolution namei: LOOKUP_NO_SYMLINKS: block symlink resolution namei: allow set_root() to produce errors namei: allow nd_jump_link() to produce errors nsfs: clean-up ns_get_path() signature to return int namei: only return -ECHILD from follow_dotdot_rcu()
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcuLinus Torvalds authored
Pull RCU warning removal from Paul McKenney: "A single commit that fixes an embarrassing bug discussed here: https://lore.kernel.org/lkml/20200125131425.GB16136@zn.tnic/ which apparently also affects smaller systems" [ This was sent to Ingo, but since I see the issue on the laptop I use for testing during the merge window, I'm doing the pull directly - Linus ] * 'urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: rcu: Forgive slow expedited grace periods at boot time
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core fixes from Ingo Molnar: "Three objtool fixes, plus marking SFI as obsolete" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Skip samples subdirectory objtool: Fix ARCH=x86_64 build error objtool: Silence build output MAINTAINERS: Mark simple firmware interface (SFI) obsolete
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver updates from Greg KH: "Here is the big char/misc/whatever driver changes for 5.6-rc1 Included in here are loads of things from a variety of different driver subsystems: - soundwire updates - binder updates - nvmem updates - firmware drivers updates - extcon driver updates - various misc driver updates - fpga driver updates - interconnect subsystem and driver updates - bus driver updates - uio driver updates - mei driver updates - w1 driver cleanups - various other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (86 commits) mei: me: add jasper point DID char: hpet: Use flexible-array member binder: fix log spam for existing debugfs file creation. mei: me: add comet point (lake) H device ids nvmem: add QTI SDAM driver dt-bindings: nvmem: add binding for QTI SPMI SDAM dt-bindings: imx-ocotp: Add i.MX8MP compatible dt-bindings: soundwire: fix example soundwire: cadence: fix kernel-doc parameter descriptions soundwire: intel: report slave_ids for each link to SOF driver siox: Use the correct style for SPDX License Identifier w1: omap-hdq: Simplify driver with PM runtime autosuspend firmware: stratix10-svc: Remove unneeded semicolon firmware: google: Probe for a GSMI handler in firmware firmware: google: Unregister driver_info on failure and exit in gsmi firmware: google: Release devices before unregistering the bus slimbus: qcom: add missed clk_disable_unprepare in remove slimbus: Use the correct style for SPDX License Identifier slimbus: qcom-ngd-ctrl: Use dma_request_chan() instead dma_request_slave_channel() dt-bindings: SLIMBus: add slim devices optional properties ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core updates from Greg KH: "Here is a small set of changes for 5.6-rc1 for the driver core and some firmware subsystem changes. Included in here are: - device.h splitup like you asked for months ago - devtmpfs minor cleanups - firmware core minor changes - debugfs fix for lockdown mode - kernfs cleanup fix - cpu topology minor fix All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (22 commits) firmware: Rename FW_OPT_NOFALLBACK to FW_OPT_NOFALLBACK_SYSFS devtmpfs: factor out common tail of devtmpfs_{create,delete}_node devtmpfs: initify a bit devtmpfs: simplify initialization of mount_dev devtmpfs: factor out setup part of devtmpfsd() devtmpfs: fix theoretical stale pointer deref in devtmpfsd() driver core: platform: fix u32 greater or equal to zero comparison cpu-topology: Don't error on more than CONFIG_NR_CPUS CPUs in device tree debugfs: Return -EPERM when locked down driver core: Print device when resources present in really_probe() driver core: Fix test_async_driver_probe if NUMA is disabled driver core: platform: Prevent resouce overflow from causing infinite loops fs/kernfs/dir.c: Clean code by removing always true condition component: do not dereference opaque pointer in debugfs drivers/component: remove modular code debugfs: Fix warnings when building documentation device.h: move 'struct driver' stuff out to device/driver.h device.h: move 'struct class' stuff out to device/class.h device.h: move 'struct bus' stuff out to device/bus.h device.h: move dev_printk()-like functions to dev_printk.h ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging and IIO updates from Greg KH: "Here is the big staging/iio driver patches for 5.6-rc1 Included in here are: - lots of new IIO drivers and updates for that subsystem - the usual huge quantity of minor cleanups for staging drivers - removal of the following staging drivers: - isdn/avm - isdn/gigaset - isdn/hysdn - octeon-usb - octeon ethernet Overall we deleted far more lines than we added, removing over 40k of old and obsolete driver code. All of these changes have been in linux-next for a while with no reported issues" * tag 'staging-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (353 commits) staging: most: usb: check for NULL device staging: next: configfs: fix release link staging: most: core: fix logging messages staging: most: core: remove container struct staging: most: remove struct device core driver staging: most: core: drop device reference staging: most: remove device from interface structure staging: comedi: drivers: fix spelling mistake "to" -> "too" staging: exfat: remove fs_func struct. staging: wilc1000: avoid mutex unlock without lock in wilc_wlan_handle_txq() staging: wilc1000: return zero on success and non-zero on function failure staging: axis-fifo: replace spinlock with mutex staging: wilc1000: remove unused code prior to throughput enhancement in SPI staging: wilc1000: added 'wilc_' prefix for 'struct assoc_resp' name staging: wilc1000: move firmware API struct's to separate header file staging: wilc1000: remove use of infinite loop conditions staging: kpc2000: rename variables with kpc namespace staging: vt6656: Remove memory buffer from vnt_download_firmware. staging: vt6656: Just check NEWRSR_DECRYPTOK for RX_FLAG_DECRYPTED. staging: vt6656: Use vnt_rx_tail struct for tail variables. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver updates from Greg KH: "Here are the big set of tty and serial driver updates for 5.6-rc1 Included in here are: - dummy_con cleanups (touches lots of arch code) - sysrq logic cleanups (touches lots of serial drivers) - samsung driver fixes (wasn't really being built) - conmakeshash move to tty subdir out of scripts - lots of small tty/serial driver updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: n_hdlc: Use flexible-array member and struct_size() helper tty: baudrate: SPARC supports few more baud rates tty: baudrate: Synchronise baud_table[] and baud_bits[] tty: serial: meson_uart: Add support for kernel debugger serial: imx: fix a race condition in receive path serial: 8250_bcm2835aux: Document struct bcm2835aux_data serial: 8250_bcm2835aux: Use generic remapping code serial: 8250_bcm2835aux: Allocate uart_8250_port on stack serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER serial: 8250_bcm2835aux: Fix line mismatch on driver unbind serial_core: Remove unused member in uart_port vt: Correct comment documenting do_take_over_console() vt: Delete comment referencing non-existent unbind_con_driver() arch/xtensa/setup: Drop dummy_con initialization arch/x86/setup: Drop dummy_con initialization arch/unicore32/setup: Drop dummy_con initialization arch/sparc/setup: Drop dummy_con initialization arch/sh/setup: Drop dummy_con initialization arch/s390/setup: Drop dummy_con initialization ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB/Thunderbolt/PHY driver updates from Greg KH: "Here is the big USB and Thunderbolt and PHY driver updates for 5.6-rc1. With the advent of USB4, "Thunderbolt" has really become USB4, so the renaming of the Kconfig option and starting to share subsystem code has begun, hence both subsystems coming in through the same tree here. PHY driver updates also touched USB drivers, so that is coming in through here as well. Major stuff included in here are: - USB 4 initial support added (i.e. Thunderbolt) - musb driver updates - USB gadget driver updates - PHY driver updates - USB PHY driver updates - lots of USB serial stuff fixed up - USB typec updates - USB-IP fixes - lots of other smaller USB driver updates All of these have been in linux-next for a while now (the usb-serial tree is already tested in linux-next on its own before merged into here), with no reported issues" [ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA that causes configuration warnings - Linus ] * tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits) Doc: ABI: add usb charger uevent usb: phy: show USB charger type for user usb: cdns3: fix spelling mistake and rework grammar in text usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors USB: serial: cyberjack: fix spelling mistake "To" -> "Too" USB: serial: ir-usb: simplify endpoint check USB: serial: ir-usb: make set_termios synchronous USB: serial: ir-usb: fix IrLAP framing USB: serial: ir-usb: fix link-speed handling USB: serial: ir-usb: add missing endpoint sanity check usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW usb: typec: wcove: fix "op-sink-microwatt" default that was in mW usb: dwc3: pci: add ID for the Intel Comet Lake -V variant usb: typec: tcpci: mask event interrupts when remove driver usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186 usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined usb: chipidea: handle single role for usb role class usb: musb: fix spelling mistake: "periperal" -> "peripheral" phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS USB: usbfs: Always unlink URBs in reverse order ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes, nothing too exciting about this. Some changes hit arch/sh and arch/arm but are well isolated and acknowledged by the respective arch maintainers. Core changes: - Dropped the chained IRQ setup callback into GPIOLIB as we got rid of the last users of that in this changeset. New drivers: - New driver for Ingenic X1830. - New driver for Freescale i.MX8MP. Driver enhancements: - Fix all remaining Intel drivers to pass their IRQ chips along with the GPIO chips. - Intel Baytrail allocates its irqchip dynamically. - Intel Lynxpoint is thoroughly rewritten and modernized. - Aspeed AST2600 pin muxing and configuration is much improved. - Qualcomm SC7180 functions are updated and wakeup interrupt map is provided. - A whole slew of Renesas SH-PFC cleanups and improvements. - Fix up the Intel DT bindings to use the generic YAML DT bindings schema (a first user of this)" * tag 'pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits) pinctrl: madera: Remove extra blank line pinctrl: qcom: Don't lock around irq_set_irq_wake() pinctrl: mvebu: armada-37xx: use use platform api gpio: Drop the chained IRQ handler assign function pinctrl: freescale: Add i.MX8MP pinctrl driver support dt-bindings: imx: Add pinctrl binding doc for i.MX8MP pinctrl: tigerlake: Tiger Lake uses _HID enumeration pinctrl: sunrisepoint: Add Coffee Lake-S ACPI ID pinctrl: iproc: Use platform_get_irq_optional() to avoid error message pinctrl: dt-bindings: Fix some errors in the lgm and pinmux schema pinctrl: intel: Pass irqchip when adding gpiochip pinctrl: intel: Add GPIO <-> pin mapping ranges via callback pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins pinctrl: sunrisepoint: Add missing Interrupt Status register offset pinctrl: sh-pfc: Split R-Car H3 support in two independent drivers pinctrl: artpec6: fix __iomem on reg in set pinctrl: ingenic: Use devm_platform_ioremap_resource() pinctrl: ingenic: Factorize irq_set_type function pinctrl: ingenic: Remove duplicated ingenic_chip_info structures ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.6 kernel cycle. This is a pretty calm cycle so far, nothing special going on really. Some more changes will come in from the irqchip and pin control trees. I also deleted an orphan include file for FMC that was dangling since subsystem was removed. Core changes: - Document the usecases for the kernelspace vs userspace handling of GPIOs. - Handle MSI (message signalled interrupts) properly in the core hierarchical irqdomain code. - Fix a rare race condition while initializing the descriptor array. New drivers: - Xylon LogiCVC GPIO driver. - WDC934x GPIO controller driver. Driver improvements: - Implemented suspend/resume in the Tegra driver. - MPC8xx edge detection fixup. - Properly convert ThunderX to use hierarchical irqdomain with GPIOLIB_IRQCHIP on top of the revert of the previous buggy switchover. This time it works (hopefully). Misc: - Drop a FMC remnant file <linux/ipmi-fru.h> - A slew of fixes" * tag 'gpio-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (48 commits) MAINTAINERS: Replace Tien Hock Loh as Altera PIO maintainer gpiolib: hold gpio devices lock until ->descs array is initialised gpio: aspeed-sgpio: fixed typos gpio: mvebu: clear irq in edge cause register before unmask edge irq gpiolib: Lower verbosity when allocating hierarchy irq gpiolib: Remove duplicated function gpio_do_set_config() gpio: Fix the no return statement warning gpio: wcd934x: Add support to wcd934x gpio controller gpiolib: remove set but not used variable 'config' gpio: vx855: fixed a typo gpio: mockup: sort headers alphabetically gpio: mockup: update the license tag gpio: Remove the unused flags gpiolib: Set lockdep class for hierarchical irq domains gpio: thunderx: Switch to GPIOLIB_IRQCHIP gpiolib: Add the support for the msi parent domain gpiolib: Add support for the irqdomain which doesn't use irq_fwspec as arg gpio: Add use guidance documentation dt-bindings: gpio: wcd934x: Add bindings for gpio gpio: altera: change to platform_get_irq_optional to avoid false-positive error ...
-
git://git.kernel.org:/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull security subsystem update from James Morris: "Just one minor fix this time" * 'for-v5.6' of git://git.kernel.org:/pub/scm/linux/kernel/git/jmorris/linux-security: security: remove EARLY_LSM_COUNT which never used
-
Linus Torvalds authored
Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull IMA updates from Mimi Zohar: "Two new features - measuring certificates and querying IMA for a file hash - and three bug fixes: - Measuring certificates is like the rest of IMA, based on policy, but requires loading a custom policy. Certificates loaded onto a keyring, for example during early boot, before a custom policy has been loaded, are queued and only processed after loading the custom policy. - IMA calculates and caches files hashes. Other kernel subsystems, and possibly kernel modules, are interested in accessing these cached file hashes. The bug fixes prevent classifying a file short read (e.g. shutdown) as an invalid file signature, add a missing blank when displaying the securityfs policy rules containing LSM labels, and, lastly, fix the handling of the IMA policy information for unknown LSM labels" * 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: IMA: Defined delayed workqueue to free the queued keys IMA: Call workqueue functions to measure queued keys IMA: Define workqueue for early boot key measurements IMA: pre-allocate buffer to hold keyrings string ima: ima/lsm policy rule loading logic bug fixes ima: add the ability to query the cached hash of a given file ima: Add a space after printing LSM rules for readability IMA: fix measuring asymmetric keys Kconfig IMA: Read keyrings= option from the IMA policy IMA: Add support to limit measuring keys KEYS: Call the IMA hook to measure keys IMA: Define an IMA hook to measure keys IMA: Add KEY_CHECK func to measure keys IMA: Check IMA policy flag ima: avoid appraise error for hash calc interrupt
-
git://git.osdn.net/gitroot/tomoyo/tomoyo-test1Linus Torvalds authored
Pull tomoyo update from Tetsuo Handa: "One 'int' -> 'atomic_t' conversion patch to suppress KCSAN's warning" * tag 'tomoyo-pr-20200128' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1: tomoyo: Use atomic_t for statistics counter
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 updates from Vasily Gorbik: - Add clang 10 build support. - Fix BUG() implementation to contain precise bug address, which is relevant for kprobes. - Make ftraced function appear in a stacktrace. - Minor perf improvements and refactoring. - Possible deadlock and recovery fixes in pci code. * tag 's390-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: fix __EMIT_BUG() macro s390/ftrace: generate traced function stack frame s390: adjust -mpacked-stack support check for clang 10 s390/jump_label: use "i" constraint for clang s390/cpum_sf: Use DIV_ROUND_UP s390/cpum_sf: Use kzalloc and minor changes s390/cpum_sf: Convert debug trace to common layout s390/pci: Fix possible deadlock in recover_store() s390/pci: Recover handle in clp_set_pci_fn()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds authored
Pull UML updates from Anton Ivanov: "I am sending this on behalf of Richard who is traveling. This contains the following changes for UML: - Fix for time travel mode - Disable CONFIG_CONSTRUCTORS again - A new command line option to have an non-raw serial line - Preparations to remove obsolete UML network drivers" * tag 'for-linus-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Fix time-travel=inf-cpu with xor/raid6 Revert "um: Enable CONFIG_CONSTRUCTORS" um: Mark non-vector net transports as obsolete um: Add an option to make serial driver non-raw
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fix from Steven Rostedt: "Kprobe events added 'ustring' to distinguish reading strings from kernel space or user space. But the creating of the event format file only checks for 'string' to display string formats. 'ustring' must also be handled" * tag 'trace-v5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/kprobes: Have uname use __get_str() in print_fmt
-
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linuxLinus Torvalds authored
Pull thermal updates from Daniel Lezcano: - Depromote debug print on the db8500 platform (Linus Walleij) - Fix compilation warning when compiling with make W=1 (Amit Kucheria) - Code cleanup and refactoring, regmap conversion and add hwmon support on Qoriq (Andrey Smirnov) - Add an idle injection cpu cooling device and its documentation, rename the cpu_cooling device to cpufreq_cooling device (Daniel Lezcano) - Convert unexported functions to static, add the __init annotation in the thermal-of code and remove the pointless wrapper functions (Daniel Lezcano) - Fix register offset for Armada XP and register reset bit initialization (Zak Hays) - Enable hwmon on the rockchip (Stefan Schaeckeler) - Add the thermal sensor for the H6/H5/H3/A64/A83T/R40 sun8i platform and their device tree bindings, followed by a fix for the ths number and the sparse warnings (Yangtao Li) - Code cleansup for the sun8i and hwmon support (Yangtao Li) - Silent some messages which are misleading given the changes made in the previous version on generic-adc (Martin Blumenstingl) - Rename exynos to Exynos (Krzysztof Kozlowski) - Add the bcm2711 thermal driver with the device tree bindings (Stefan Wahren) - Use usleep_range() instead of udelay() as the call is always done in a sleep-able context (Geert Uytterhoeven) - Do code cleanup and re-organization to set the scene for a new process for the brcmstb (Florian Fainelli) - Fix bindings check issues on brcm (Stefan Wahren) - Add Jasper Lake support on int340x (Nivedita Swaminathan) - Add Comet Lake support on intel pch (Gayatri Kammela) - Fix unmatched pci_release_region() on x86 (Chuhong Yuan) - Remove temperature boundaries for rcar and rcar3 (Niklas Söderlund) - Fix return value to -ENODEV when thermal_zone_of_sensor_register() is called with the of-node is missing (Peter Mamonov) - Code cleanup, interrupt bouncing, and better support on stm32 (Pascal Paillet) * tag 'thermal-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (66 commits) thermal: stm32: Fix low threshold interrupt flood thermal: stm32: Improve temperature computing thermal: stm32: Handle multiple trip points thermal: stm32: Disable interrupts at probe thermal: stm32: Rework sensor mode management thermal: stm32: Fix icifr register name thermal: of: Make thermal_zone_of_sensor_register return -ENODEV if a sensor OF node is missing thermal: rcar_gen3_thermal: Remove temperature bound thermal: rcar_thermal: Remove temperature bound thermal: intel: intel_pch_thermal: Add Comet Lake (CML) platform support thermal: intel: Fix unmatched pci_release_region thermal: int340x: processor_thermal: Add Jasper Lake support dt-bindings: brcm,avs-ro-thermal: Fix binding check issues thermal: brcmstb_thermal: Register different ops per process thermal: brcmstb_thermal: Restructure interrupt registration thermal: brcmstb_thermal: Add 16nm process thermal parameters dt-bindings: thermal: Define BCM7216 thermal sensor compatible thermal: brcmstb_thermal: Prepare to support a different process thermal: brcmstb_thermal: Do not use DT coefficients thermal: rcar_thermal: Use usleep_range() instead of udelay() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound updates from Takashi Iwai: "As the diffstat shows we've had again a lot of works done for this cycle: the majority of changes are the continued componentization and code refactoring in ASoC, the tree-wide PCM API updates and cleanups and SOF updates while a few ASoC driver updates are seen, too. Here we go, some highlights: Core: - Finally y2038 support landed to ALSA ABI; some ioctls have been extended and lots of tricks were applied - Applying the new managed PCM buffer API to all drivers; the API itself was already merged in 5.5 - The already deprecated dimension support in ALSA control API is dropped completely now - Verification of ALSA control elements to catch API misuses ASoC: - Further code refactorings and moving things to the component level - Lots of updates and improvements on SOF / Intel drivers; now including common HDMI driver and SoundWire support - New driver support for Ingenic JZ4770, Mediatek MT6660, Qualcomm WCD934x and WSA881x, and Realtek RT700, RT711, RT715, RT1011, RT1015 and RT1308 HD-audio: - Improved ring-buffer communications using waitqueue - Drop the superfluous buffer preallocation on x86 Others: - Many code cleanups, mostly constifications over the whole tree - USB-audio: quirks for MOTU, Corsair Virtuoso, Line6 Helix - FireWire: code refactoring for oxfw and dice drivers" * tag 'sound-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (638 commits) ALSA: usb-audio: add quirks for Line6 Helix devices fw>=2.82 ALSA: hda: Add Clevo W65_67SB the power_save blacklist ASoC: soc-core: remove null_snd_soc_ops ASoC: soc-pcm: add soc_rtd_trigger() ASoC: soc-pcm: add soc_rtd_hw_free() ASoC: soc-pcm: add soc_rtd_hw_params() ASoC: soc-pcm: add soc_rtd_prepare() ASoC: soc-pcm: add soc_rtd_shutdown() ASoC: soc-pcm: add soc_rtd_startup() ASoC: rt1015: add rt1015 amplifier driver ASoC: madera: Correct some kernel doc ASoC: topology: fix soc_tplg_fe_link_create() - link->dobj initialization order ASoC: Intel: skl_hda_dsp_common: Fix global-out-of-bounds bug ASoC: madera: Correct DMIC only input hook ups ALSA: cs46xx: fix spelling mistake "to" -> "too" ALSA: hda - Add docking station support for Lenovo Thinkpad T420s ASoC: Add MediaTek MT6660 Speaker Amp Driver ASoC: dt-bindings: rt5645: add suppliers ASoC: max98090: fix deadlock in max98090_dapm_put_enum_double() ASoC: dapm: add snd_soc_dapm_put_enum_double_locked ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds authored
Pull networking updates from David Miller: 1) Add WireGuard 2) Add HE and TWT support to ath11k driver, from John Crispin. 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca. 4) Add variable window congestion control to TIPC, from Jon Maloy. 5) Add BCM84881 PHY driver, from Russell King. 6) Start adding netlink support for ethtool operations, from Michal Kubecek. 7) Add XDP drop and TX action support to ena driver, from Sameeh Jubran. 8) Add new ipv4 route notifications so that mlxsw driver does not have to handle identical routes itself. From Ido Schimmel. 9) Add BPF dynamic program extensions, from Alexei Starovoitov. 10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes. 11) Add support for macsec HW offloading, from Antoine Tenart. 12) Add initial support for MPTCP protocol, from Christoph Paasch, Matthieu Baerts, Florian Westphal, Peter Krystad, and many others. 13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu Cherian, and others. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits) net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC udp: segment looped gso packets correctly netem: change mailing list qed: FW 8.42.2.0 debug features qed: rt init valid initialization changed qed: Debug feature: ilt and mdump qed: FW 8.42.2.0 Add fw overlay feature qed: FW 8.42.2.0 HSI changes qed: FW 8.42.2.0 iscsi/fcoe changes qed: Add abstraction for different hsi values per chip qed: FW 8.42.2.0 Additional ll2 type qed: Use dmae to write to widebus registers in fw_funcs qed: FW 8.42.2.0 Parser offsets modified qed: FW 8.42.2.0 Queue Manager changes qed: FW 8.42.2.0 Expose new registers and change windows qed: FW 8.42.2.0 Internal ram offsets modifications MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver Documentation: net: octeontx2: Add RVU HW and drivers overview octeontx2-pf: ethtool RSS config support octeontx2-pf: Add basic ethtool support ...
-