This allows explicitly specifying which children are present on the mdio
bus. Additionally, it allows for non-phy MDIO devices on the bus.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds an optional mdio bus child node. If present, the mac will
look for PHYs there instead of directly under the top-level node. This
eliminates any ambiguity about whether child nodes are PHYs, and allows
the MDIO bus to contain non-PHY devices.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 16nm internal EPHY that is present in 7712 is actually a 16nm
Gigabit PHY which has been forced to operate in 10/100 mode. Its
controls are therefore via the EXT_GPHY_CTRL registers and not via the
EXT_EPHY_CTRL which are used for all GENETv5 adapters. Add a match on
the 7712 compatible string to allow that differentiation to happen.

On previous GENETv4 chips the EXT_CFG_IDDQ_GLOBAL_PWR bit was cleared by
default, but this is not the case with this chip, so we need to make
sure we clear it to power on the EPHY.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7712 includes a GENETv5 adapter with an on-chip 10/100 16nm Ethernet PHY
which requires us to document that controller's integration specifically
for proper driver keying.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

7712 is a 16nm process SoC with a 10/100 integrated Ethernet PHY,
utilize the recently defined 16nm EPHY macro to configure that PHY.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This converts users of mdiobus to mdiodev using the following semantic
patch:

@@
identifier mdiodev;
expression regnum;
@@

- mdiobus_read(mdiodev->bus, mdiodev->addr, regnum)
+ mdiodev_read(mdiodev, regnum)

@@
identifier mdiodev;
expression regnum, val;
@@

- mdiobus_write(mdiodev->bus, mdiodev->addr, regnum, val)
+ mdiodev_write(mdiodev, regnum, val)
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This refactors the phylink pcs helper functions to use mdiobus_* instead
of mdiodev_*.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds some helpers for accessing non-phy MDIO devices. They are
analogous to phy_(read|write|modify), except that they take an mdio_device
and not a phy_device.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

With current KPU profile, we have 2 reserved entries which can
be loaded from firmware to parse custom headers. Adding changes
to increase these reserved entries to 6.
And also removed KPU entries for unused LTYPEs like
NPC_LT_LA_IH_8_ETHER, NPC_LT_LA_IH_4_ETHER, NPC_LT_LA_IH_2_ETHER
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Leon Romanovsky says:

====================
Delete impossible devlink notifications

This series is a followup to the delayed devlink notification scheme.

I removed the impossible notifications together with attempt to annotate
various calls in order to mark them as pre/post devlink_register().

Other notifications are called before and after delvink_register() so
they weren't changed in this pathcset.
====================

Link: https://lore.kernel.org/r/cover.1634825474.git.leonro@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The parameters are registered before devlink_register() and all the
notifications are delayed. This patch removes not-possible parameters
notifications along with addition of code annotation logic.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The trap logic is registered before devlink_register() and all the
notifications are delayed. This patch removes not-possible trap group
notifications along with addition of code annotation logic.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The trap policer logic is registered before devlink_register() and all the
notifications are delayed. This patch removes not-possible notifications
along with addition of code annotation logic.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The change of devlink_register() to be last devlink command together
with delayed notification logic made the publish API to be obsolete.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When addr_gen_mode is set to IN6_ADDR_GEN_MODE_NONE, the link-local addr
should not be generated. But it isn't the case for GRE (as well as GRE6)
and SIT tunnels. Make it so that tunnels consider the addr_gen_mode,
especially for IN6_ADDR_GEN_MODE_NONE.

Do this in add_v4_addrs() to cover both GRE and SIT only if the addr
scope is link.
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Acked-by: Antonio Quartulli <a@unstable.cc>
Link: https://lore.kernel.org/r/20211020200618.467342-1-ssuryaextr@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix following coccicheck warning:
./drivers/net/dsa/sja1105/sja1105_main.c:1193:1-33: WARNING: Function
for_each_available_child_of_node should have of_node_put() before return.

Early exits from for_each_available_child_of_node should decrement the
node reference counter.

Fixes: 9ca482a2 ("net: dsa: sja1105: parse {rx, tx}-internal-delay-ps properties for RGMII delays")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20211021094606.7118-1-wanjiabing@vivo.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Repalce kthread_create/wake_up_process() with kthread_run()
to simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20211021084158.2183-1-caihuoqing@baidu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-drivers-next-2021-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.16

Second set of patches for v5.16 and this time we have a big one. We
have the new Realtek driver rtw89 with over 90 kLOC and also over 150
patches for mt76. ath9k also got few new small features. And the usual
cleanups and fixes all over.

Major changes:

rtw89
 * new Realtek 802.11ax driver
 * supports Realtek 8852AE 802.11ax 2x2 chip

ath9k
 * add option to reset the wifi chip via debugfs
 * convert Device Tree bindings to the json-schema
 * support Device Tree ieee80211-freq-limit property to limit channels

mt76
 * mt7921 aspm support
 * mt7921 testmode support
 * mt7915 LED support
 * mt7921 6GHz band support
 * support for eeprom data in DT
 * mt7915 TWT support
 * mt7921s SDIO support

* tag 'wireless-drivers-next-2021-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (213 commits)
  zd1201: use eth_hw_addr_set()
  wl3501_cs: use eth_hw_addr_set()
  ray_cs: use eth_hw_addr_set()
  ...
====================

Link: https://lore.kernel.org/r/20211022075845.0E679C4360D@smtp.codeaurora.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'mac80211-next-for-net-next-2021-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Quite a few changes:
 * the applicable eth_hw_addr_set() and const hw_addr changes
 * various code cleanups/refactorings
 * stack usage reductions across the wireless stack
 * some unstructured find_ie() -> structured find_element()
   changes
 * a few more pieces of multi-BSSID support
 * some 6 GHz regulatory support
 * 6 GHz support in hwsim, for testing userspace code
 * Light Communications (LC, 802.11bb) early band definitions
   to be able to add a first driver soon

* tag 'mac80211-next-for-net-next-2021-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (35 commits)
  cfg80211: fix kernel-doc for MBSSID EMA
  mac80211: Prevent AP probing during suspend
  nl80211: Add LC placeholder band definition to nl80211_band
  ...
====================

Link: https://lore.kernel.org/r/20211021154953.134849-1-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Don't write directly to netdev->dev_addr.

More conversions, mostly in usb/net.

v2: leave out catc (patch 4)

Link: https://lore.kernel.org/r/20211021131214.2032925-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Get these two oldies ready for constant netdev->dev_addr.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Get it ready for constant netdev->dev_addr.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Make sure local references to netdev->dev_addr are constant.
Acked-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Get it ready for constant netdev->dev_addr.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Get it ready for constant netdev->dev_addr.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Acked-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Manually fix all net/usb drivers without separate maintainers.

v2: catc does DMA to the buffer, leave the conversion to Oliver
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Silent merge conflict between these two:

  3d677735 ("net/mlx5: Lag, move lag files into directory")
  14fe2471 ("net/mlx5: Lag, change multipath and bonding to be mutually exclusive")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

M<erge issues...
Signed-off-by: David S. Miller <davem@davemloft.net>

Lots of simnple overlapping additions.

With a build fix from Stephen Rothwell.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull drm fixes from Dave Airlie:
 "Nothing too crazy at the end of the cycle, the kmb modesetting fixes
  are probably a bit large but it's not a major driver, and its fixing
  monitor doesn't turn on type problems.

  Otherwise it's just a few minor patches, one ast regression revert, an
  msm power stability fix.

  ast:
   - fix regression with connector detect

  msm:
   - fix power stability issue

  msxfb:
   - fix crash on unload

  panel:
   - sync fix

  kmb:
   - modesetting fixes"

* tag 'drm-fixes-2021-10-22' of git://anongit.freedesktop.org/drm/drm:
  Revert "drm/ast: Add detect function support"
  drm/kmb: Enable ADV bridge after modeset
  drm/kmb: Corrected typo in handle_lcd_irq
  drm/kmb: Disable change of plane parameters
  drm/kmb: Remove clearing DPHY regs
  drm/kmb: Limit supported mode to 1080p
  drm/kmb: Work around for higher system clock
  drm/panel: ilitek-ili9881c: Fix sync for Feixin K101-IM2BYL02 panel
  drm: mxsfb: Fix NULL pointer dereference crash on unload
  drm/msm/devfreq: Restrict idle clamping to a618 for now

Vladimir Zapolskiy reports:

Commit a7259df7 ("memblock: make memblock_find_in_range method
private") invokes a kernel panic while running kmemleak on OF platforms
with nomaped regions:

  Unable to handle kernel paging request at virtual address fff000021e00000
  [...]
    scan_block+0x64/0x170
    scan_gray_list+0xe8/0x17c
    kmemleak_scan+0x270/0x514
    kmemleak_write+0x34c/0x4ac

The memory allocated from memblock is registered with kmemleak, but if
it is marked MEMBLOCK_NOMAP it won't have linear map entries so an
attempt to scan such areas will fault.

Ideally, memblock_mark_nomap() would inform kmemleak to ignore
MEMBLOCK_NOMAP memory, but it can be called before kmemleak interfaces
operating on physical addresses can use __va() conversion.

Make sure that functions that mark allocated memory as MEMBLOCK_NOMAP
take care of informing kmemleak to ignore such memory.

Link: https://lore.kernel.org/all/8ade5174-b143-d621-8c8e-dc6a1898c6fb@linaro.org
Link: https://lore.kernel.org/all/c30ff0a2-d196-c50d-22f0-bd50696b1205@quicinc.com
Fixes: a7259df7 ("memblock: make memblock_find_in_range method private")
Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 6e44bd6d ("memblock: exclude NOMAP regions from kmemleak")
breaks boot on EFI systems with kmemleak and VM_DEBUG enabled:

  efi: Processing EFI memory map:
  efi:   0x000090000000-0x000091ffffff [Conventional|   |  |  |  |  |  |  |  |  |   |WB|WT|WC|UC]
  efi:   0x000092000000-0x0000928fffff [Runtime Data|RUN|  |  |  |  |  |  |  |  |   |WB|WT|WC|UC]
  ------------[ cut here ]------------
  kernel BUG at mm/kmemleak.c:1140!
  Internal error: Oops - BUG: 0 [#1] SMP
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc6-next-20211019+ #104
  pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  pc : kmemleak_free_part_phys+0x64/0x8c
  lr : kmemleak_free_part_phys+0x38/0x8c
  sp : ffff800011eafbc0
  x29: ffff800011eafbc0 x28: 1fffff7fffb41c0d x27: fffffbfffda0e068
  x26: 0000000092000000 x25: 1ffff000023d5f94 x24: ffff800011ed84d0
  x23: ffff800011ed84c0 x22: ffff800011ed83d8 x21: 0000000000900000
  x20: ffff800011782000 x19: 0000000092000000 x18: ffff800011ee0730
  x17: 0000000000000000 x16: 0000000000000000 x15: 1ffff0000233252c
  x14: ffff800019a905a0 x13: 0000000000000001 x12: ffff7000023d5ed7
  x11: 1ffff000023d5ed6 x10: ffff7000023d5ed6 x9 : dfff800000000000
  x8 : ffff800011eaf6b7 x7 : 0000000000000001 x6 : ffff800011eaf6b0
  x5 : 00008ffffdc2a12a x4 : ffff7000023d5ed7 x3 : 1ffff000023dbf99
  x2 : 1ffff000022f0463 x1 : 0000000000000000 x0 : ffffffffffffffff
  Call trace:
   kmemleak_free_part_phys+0x64/0x8c
   memblock_mark_nomap+0x5c/0x78
   reserve_regions+0x294/0x33c
   efi_init+0x2d0/0x490
   setup_arch+0x80/0x138
   start_kernel+0xa0/0x3ec
   __primary_switched+0xc0/0xc8
  Code: 34000041 97d526e7 f9418e80 36000040 (d4210000)
  random: get_random_bytes called from print_oops_end_marker+0x34/0x80 with crng_init=0
  ---[ end trace 0000000000000000 ]---

The crash happens because kmemleak_free_part_phys() tries to use __va()
before memstart_addr is initialized and this triggers a VM_BUG_ON() in
arch/arm64/include/asm/memory.h:

Revert 6e44bd6d ("memblock: exclude NOMAP regions from kmemleak"),
the issue it is fixing will be fixed differently.
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'ucount-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull ucounts fixes from Eric Biederman:
 "There has been one very hard to track down bug in the ucount code that
  we have been tracking since roughly v5.14 was released. Alex managed
  to find a reliable reproducer a few days ago and then I was able to
  instrument the code and figure out what the issue was.

  It turns out the sigqueue_alloc single atomic operation optimization
  did not play nicely with ucounts multiple level rlimits. It turned out
  that either sigqueue_alloc or sigqueue_free could be operating on
  multiple levels and trigger the conditions for the optimization on
  more than one level at the same time.

  To deal with that situation I have introduced inc_rlimit_get_ucounts
  and dec_rlimit_put_ucounts that just focuses on the optimization and
  the rlimit and ucount changes.

  While looking into the big bug I found I couple of other little issues
  so I am including those fixes here as well.

  When I have time I would very much like to dig into process ownership
  of the shared signal queue and see if we could pick a single owner for
  the entire queue so that all of the rlimits can count to that owner.
  That should entirely remove the need to call get_ucounts and
  put_ucounts in sigqueue_alloc and sigqueue_free. It is difficult
  because Linux unlike POSIX supports setuid that works on a single
  thread"

* 'ucount-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ucounts: Move get_ucounts from cred_alloc_blank to key_change_session_keyring
  ucounts: Proper error handling in set_cred_ucounts
  ucounts: Pair inc_rlimit_ucounts with dec_rlimit_ucoutns in commit_creds
  ucounts: Fix signal ucount refcounting

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, and can.

  We'll have one more fix for a socket accounting regression, it's still
  getting polished. Otherwise things look fine.

  Current release - regressions:

   - revert "vrf: reset skb conntrack connection on VRF rcv", there are
     valid uses for previous behavior

   - can: m_can: fix iomap_read_fifo() and iomap_write_fifo()

  Current release - new code bugs:

   - mlx5: e-switch, return correct error code on group creation failure

  Previous releases - regressions:

   - sctp: fix transport encap_port update in sctp_vtag_verify

   - stmmac: fix E2E delay mechanism (in PTP timestamping)

  Previous releases - always broken:

   - netfilter: ip6t_rt: fix out-of-bounds read of ipv6_rt_hdr

   - netfilter: xt_IDLETIMER: fix out-of-bound read caused by lack of
     init

   - netfilter: ipvs: make global sysctl read-only in non-init netns

   - tcp: md5: fix selection between vrf and non-vrf keys

   - ipv6: count rx stats on the orig netdev when forwarding

   - bridge: mcast: use multicast_membership_interval for IGMPv3

   - can:
      - j1939: fix UAF for rx_kref of j1939_priv abort sessions on
        receiving bad messages

      - isotp: fix TX buffer concurrent access in isotp_sendmsg() fix
        return error on FC timeout on TX path

   - ice: fix re-init of RDMA Tx queues and crash if RDMA was not inited

   - hns3: schedule the polling again when allocation fails, prevent
     stalls

   - drivers: add missing of_node_put() when aborting
     for_each_available_child_of_node()

   - ptp: fix possible memory leak and UAF in ptp_clock_register()

   - e1000e: fix packet loss in burst mode on Tiger Lake and later

   - mlx5e: ipsec: fix more checksum offload issues"

* tag 'net-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits)
  usbnet: sanity check for maxpacket
  net: enetc: make sure all traffic classes can send large frames
  net: enetc: fix ethtool counter name for PM0_TERR
  ptp: free 'vclock_index' in ptp_clock_release()
  sfc: Don't use netif_info before net_device setup
  sfc: Export fibre-specific supported link modes
  net/mlx5e: IPsec: Fix work queue entry ethernet segment checksum flags
  net/mlx5e: IPsec: Fix a misuse of the software parser's fields
  net/mlx5e: Fix vlan data lost during suspend flow
  net/mlx5: E-switch, Return correct error code on group creation failure
  net/mlx5: Lag, change multipath and bonding to be mutually exclusive
  ice: Add missing E810 device ids
  igc: Update I226_K device ID
  e1000e: Fix packet loss on Tiger Lake and later
  e1000e: Separate TGP board type from SPT
  ptp: Fix possible memory leak in ptp_clock_register()
  net: stmmac: Fix E2E delay mechanism
  nfc: st95hf: Make spi remove() callback return zero
  net: hns3: disable sriov before unload hclge layer
  net: hns3: fix vf reset workqueue cannot exit
  ...