Instead of using ugly ifdeffery, mark PM functions as __maybe_unused.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200831090813.78841-4-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Instead of using to_spi_dev() + spi_get_drvdata(),
use dev_get_drvdata() to make code simpler.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200831090813.78841-3-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Convert to use ->read_avail() instead of open-coded attribute handling.

While here, fix the typo in array definition and append comma in case of
the future extension.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200831090813.78841-2-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Potentially bma220_init() and bma220_deinit() may return positive codes.
Fix the logic to return proper error codes instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200831090813.78841-1-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Drops the deprecated compatibles without the vendor name.
Whilst the driver continues to support these for old dt blobs,
any dt bindings that are actuallly verified against this document should
be fixed to add the vendor name.

Added the #io-channel-cells property to allow for consumers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Oskar Andero <oskar.andero@gmail.com>
Link: https://lore.kernel.org/r/20200809111753.156236-2-jic23@kernel.org

A transfer may fall shorter than the bytes in the block.
This information is available in the residue from the DMA engine, so we can
compute actual `bytes_used` with that by subtracting the residue.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20200826052011.13348-1-lars@metafoo.deSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Simple binding so easy to convert.
Dropped the stated value of maximum spi bus frequency as it does
not seem to correspond to the datasheet.  The value of 200kHz
is the max sampling frequency of the ADC, not the clock frequency of
the SPI bus.

Added #io-channel-cells to allow use as a provider of channels to
other devices via the consumer binding.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-By: Phil Reid <preid@electromag.com.au>
Cc: Phil Reid <preid@electromag.com.au>
Link: https://lore.kernel.org/r/20200809111753.156236-14-jic23@kernel.org

JC: Seems that I messed up applying the original driver patches, and
this file never actually made it into the tree.

I have picked up original Ack and Sign-off so as to record the
history.
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200809111753.156236-13-jic23@kernel.org

Simple binding so easy to convert.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200809111753.156236-12-jic23@kernel.org

Simple binding.  Only addition to txt version is
as a provider of channels to other devices using the consumer
binding.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Link: https://lore.kernel.org/r/20200809111753.156236-10-jic23@kernel.org

Simple binding conversion of this SPI ADC binding, with reference
voltage.

Added the optional property #io-channel-cells to allow for
consumers of channels if that makes sense for a given board.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Link: https://lore.kernel.org/r/20200809111753.156236-7-jic23@kernel.org

Simple conversion for this ADC driver.  Note that I haven't put
limits on the spi-max-sampling-frequency because the adc161s626
doesn't state one clearly defined value.

Added the #io-channel-cells property to allow for consumers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Link: https://lore.kernel.org/r/20200809111753.156236-6-jic23@kernel.org

Very simple binding for this i2c device with a reference supply.

Added the #io-channel-cells property to allow for consumers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20200809111753.156236-5-jic23@kernel.org

Very simple conversion of spi device with reference supply.

Added the #io-channel-cells property to allow for consumers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/20200809111753.156236-4-jic23@kernel.org

These i2c devices have simple bindings, well described by trivial-device.yaml
so rather than convert the binding doc to yaml, let us just add them to
trivial devices and drop the old binding document.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Link: https://lore.kernel.org/r/20200809111753.156236-3-jic23@kernel.org

Document use of additional trigger supplied by driver.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20200810093257.65929-3-alexandru.tachici@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

By default, if all three channels (x, y, z) are enabled, sample sets of
concurrent 3-axis data is stored in the FIFO. This patch adds the option
to configure the FIFO to store peak acceleration (x, y and z) of every
over-threshold event. When pushing to iio buffer we push only enabled
axis data.

Currently the driver configures adxl372 to work in loop mode.
The inactivity and activity timings  decide how fast the chip
will loop through the awake and waiting states and the
thresholds on x,y,z axis decide when activity or inactivity
will be detected.

This patch adds standard events sysfs entries for the inactivity
and activity timings: thresh_falling_period/thresh_rising_period
and for the in_accel_x_thresh_falling/rising_value.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20200810093257.65929-2-alexandru.tachici@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

There is some inconsistency and whitespace cleanup performed in this
patch. It was done on top of my other patches, but I can rebase to head
of the togreg branch if it would go in sooner.
Signed-off-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200818213737.140613-6-cmo@melexis.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

For some time the market wants medical grade accuracy in medical range,
while still retaining the declared accuracy outside of the medical range
within the same sensor. That is why we created extended calibration
which is automatically switched to when object temperature is too high.

This patch also introduces the object_ambient_temperature variable which
is needed for more accurate calculation of the object infra-red
footprint as sensor's ambient temperature might be totally different
than what the ambient temperature is at object and that is why we can
have some more errors which can be eliminated. Currently this temperature
is fixed at 25, but the interface to adjust it by user (with external
sensor or just IR measurement of the other object which acts as ambient),
will be introduced in another commit.
Signed-off-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200818213737.140613-5-cmo@melexis.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Reduce number of lines and improve readability to convert polling while
loops to regmap_read_poll_timeout.
Signed-off-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200818213737.140613-4-cmo@melexis.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Document internal/private struct for mlx90632 device.
Signed-off-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200818213737.140613-3-cmo@melexis.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

TAdut4 was calculated each iteration although it did not change. In light
of near future additions of the Extended range DSP calculations, this
function refactoring will help reduce unrelated changes in that series as
well as reduce the number of new functions needed.
Signed-off-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200818213737.140613-2-cmo@melexis.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Insert a missing mutex_init() call during the probe that initializes
the driver's local lock to unlocked state.

Fixes: 2c8920ff ("iio: gyro: Add driver support for ADXRS290")
Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com>
Link: https://lore.kernel.org/r/20200825124552.11155-1-nish.malpani25@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Change "[w|W]hat[:| ]" to What: for consistency.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20200828233156.2264689-2-gwendal@chromium.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20200829064726.26268-18-krzk@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200829064726.26268-17-krzk@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200829064726.26268-16-krzk@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200829064726.26268-15-krzk@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200829064726.26268-14-krzk@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Link: https://lore.kernel.org/r/20200829064726.26268-13-krzk@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20200829064726.26268-12-krzk@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Link: https://lore.kernel.org/r/20200829064726.26268-11-krzk@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200829064726.26268-10-krzk@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20200829064726.26268-9-krzk@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200829064726.26268-8-krzk@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200829064726.26268-7-krzk@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20200829064726.26268-6-krzk@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200829064726.26268-5-krzk@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200829064726.26268-4-krzk@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20200829064726.26268-3-krzk@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>