Kickstart 6.9 development cycle.
Signed-off-by: Maxime Ripard <mripard@kernel.org>

Add support for the EDT ETML1010G3DRA 10.1" 1280x800 LVDS panel.
Datasheet can be found at [1].

[1] https://www.glynshop.com/erp/owweb/Daten/DSS/EDT/Products/Specifications/Active%20Displays/ETML1010G3DRA%20Ver.3-RoHS.pdfSigned-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20240126-wip-y-moog-phytec-de-upstream-pollux-lvds-v1-2-8ec5b48eec05@phytec.deSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126-wip-y-moog-phytec-de-upstream-pollux-lvds-v1-2-8ec5b48eec05@phytec.de

Add Emerging Display Technology Corp. etml1010g3dra 10.1" LCD-TFT LVDS
panel compatible string.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240126-wip-y-moog-phytec-de-upstream-pollux-lvds-v1-1-8ec5b48eec05@phytec.deSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126-wip-y-moog-phytec-de-upstream-pollux-lvds-v1-1-8ec5b48eec05@phytec.de

When a Loongson laptop is equipped with a Radeon GPU, it can be true that
there is no dedicated VRAM soldered on the motherboard. This is probably
for cost reason, but drm/loongson driver is probed because the platform
BIOS (either UEFI or PMON) forget to disable the integrated GPU.

So in the lsdc_get_dedicated_vram() function, we error out if no dedicated
VRAM detected. This fix nothing, but serve as a sanity check only.
Tested-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124101607.2910998-1-chenhuacai@loongson.cn

Some drivers require the mapped tt pages to be decrypted. In an ideal
world this would have been handled by the dma layer, but the TTM page
fault handling would have to be rewritten to able to do that.

A side-effect of the TTM page fault handling is using a dma allocation
per order (via ttm_pool_alloc_page) which makes it impossible to just
trivially use dma_mmap_attrs. As a result ttm has to be very careful
about trying to make its pgprot for the mapped tt pages match what
the dma layer thinks it is. At the ttm layer it's possible to
deduce the requirement to have tt pages decrypted by checking
whether coherent dma allocations have been requested and the system
is running with confidential computing technologies.

This approach isn't ideal but keeping TTM matching DMAs expectations
for the page properties is in general fragile, unfortunately proper
fix would require a rewrite of TTM's page fault handling.

Fixes vmwgfx with SEV enabled.

v2: Explicitly include cc_platform.h
v3: Use CC_ATTR_GUEST_MEM_ENCRYPT instead of CC_ATTR_MEM_ENCRYPT to
limit the scope to guests and log when memory decryption is enabled.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: 3bf3710e ("drm/ttm: Add a generic TTM memcpy move for page-based iomem")
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # v5.14+
Link: https://patchwork.freedesktop.org/patch/msgid/20230926040359.3040017-1-zack@kde.org

vmw_context_cotable can return either an error or a null pointer and its
usage sometimes went unchecked. Subsequent code would then try to access
either a null pointer or an error value.

The invalid dereferences were only possible with malformed userspace
apps which never properly initialized the rendering contexts.

Check the results of vmw_context_cotable to fix the invalid derefs.

Thanks:
ziming zhang(@ezrak1e) from Ant Group Light-Year Security Lab
who was the first person to discover it.
Niels De Graef who reported it and helped to track down the poc.

Fixes: 9c079b8c ("drm/vmwgfx: Adapt execbuf to the new validation api")
Cc: <stable@vger.kernel.org> # v4.20+
Reported-by: Niels De Graef  <ndegraef@redhat.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Cc: Martin Krastev <martin.krastev@broadcom.com>
Cc: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Cc: Ian Forbes <ian.forbes@broadcom.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240110200305.94086-1-zack.rusin@broadcom.com

Without this definition device errors will display the command name
as (null) when debug logging is enabled.
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240108211655.13187-1-ian.forbes@broadcom.com

Instead of a list of separate busy placement add flags which indicate
that a placement should only be used when there is room or if we need to
evict.

v2: add missing TTM_PL_FLAG_IDLE for i915
v3: fix auto build test ERROR on drm-tip/drm-tip
v4: fix some typos pointed out by checkpatch
v5: cleanup some rebase problems with VMWGFX
v6: implement some missing VMWGFX functionality pointed out by Zack,
    rename the flags as suggested by Michel, rebase on drm-tip and
    adjust XE as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240112125158.2748-4-christian.koenig@amd.com

Only convert it to ENOMEM in ttm_bo_validate.

This allows ttm_bo_validate to distinguish between an out of memory
situation and just out of space in a placement domain.

v2: improve commit message
v3: fix kerneldoc typos
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240112125158.2748-3-christian.koenig@amd.com

The driver never unregisters the audio codec platform device, which can
lead to a crash on module reloading, nor does it handle the return value
from sii902x_audio_codec_init().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Fixes: ff578163 ("drm/bridge: sii902x: Implement HDMI audio support")
Cc: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240103-si902x-fixes-v1-2-b9fd3e448411@ideasonboard.com

A null pointer dereference crash has been observed rarely on TI
platforms using sii9022 bridge:

[   53.271356]  sii902x_get_edid+0x34/0x70 [sii902x]
[   53.276066]  sii902x_bridge_get_edid+0x14/0x20 [sii902x]
[   53.281381]  drm_bridge_get_edid+0x20/0x34 [drm]
[   53.286305]  drm_bridge_connector_get_modes+0x8c/0xcc [drm_kms_helper]
[   53.292955]  drm_helper_probe_single_connector_modes+0x190/0x538 [drm_kms_helper]
[   53.300510]  drm_client_modeset_probe+0x1f0/0xbd4 [drm]
[   53.305958]  __drm_fb_helper_initial_config_and_unlock+0x50/0x510 [drm_kms_helper]
[   53.313611]  drm_fb_helper_initial_config+0x48/0x58 [drm_kms_helper]
[   53.320039]  drm_fbdev_dma_client_hotplug+0x84/0xd4 [drm_dma_helper]
[   53.326401]  drm_client_register+0x5c/0xa0 [drm]
[   53.331216]  drm_fbdev_dma_setup+0xc8/0x13c [drm_dma_helper]
[   53.336881]  tidss_probe+0x128/0x264 [tidss]
[   53.341174]  platform_probe+0x68/0xc4
[   53.344841]  really_probe+0x188/0x3c4
[   53.348501]  __driver_probe_device+0x7c/0x16c
[   53.352854]  driver_probe_device+0x3c/0x10c
[   53.357033]  __device_attach_driver+0xbc/0x158
[   53.361472]  bus_for_each_drv+0x88/0xe8
[   53.365303]  __device_attach+0xa0/0x1b4
[   53.369135]  device_initial_probe+0x14/0x20
[   53.373314]  bus_probe_device+0xb0/0xb4
[   53.377145]  deferred_probe_work_func+0xcc/0x124
[   53.381757]  process_one_work+0x1f0/0x518
[   53.385770]  worker_thread+0x1e8/0x3dc
[   53.389519]  kthread+0x11c/0x120
[   53.392750]  ret_from_fork+0x10/0x20

The issue here is as follows:

- tidss probes, but is deferred as sii902x is still missing.
- sii902x starts probing and enters sii902x_init().
- sii902x calls drm_bridge_add(). Now the sii902x bridge is ready from
  DRM's perspective.
- sii902x calls sii902x_audio_codec_init() and
  platform_device_register_data()
- The registration of the audio platform device causes probing of the
  deferred devices.
- tidss probes, which eventually causes sii902x_bridge_get_edid() to be
  called.
- sii902x_bridge_get_edid() tries to use the i2c to read the edid.
  However, the sii902x driver has not set up the i2c part yet, leading
  to the crash.

Fix this by moving the drm_bridge_add() to the end of the
sii902x_init(), which is also at the very end of sii902x_probe().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Fixes: 21d80840 ("drm/bridge/sii902x: Fix EDID readback")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240103-si902x-fixes-v1-1-b9fd3e448411@ideasonboard.com

According to new configuration spreadsheet from Toshiba for TC9595,
the Pixel PLL input clock have to be in range 6..40 MHz. The sheet
calculates those PLL input clock as reference clock divided by both
pre-dividers. Add the extra limit.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240118220243.203655-1-marex@denx.de

Enable support for nomodeset= parameter via CONFIG_VIDEO. Both,
DRM and fbdev, already select this option. Remove the existing
option CONFIG_VIDEO_NOMODESET. Simplifies the Kconfig rules.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240118090721.7995-4-tzimmermann@suse.de

The function __video_get_options() only exists for compatibility
with old fbdev drivers that cannot be refactored easily. Hide it
behind CONFIG_FB_CORE.

v2:
	* support CONFIG_FB_CORE=m via IS_ENABLED() (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240118090721.7995-3-tzimmermann@suse.de

Add CONFIG_VIDEO for common code in drivers/video/. Use the option to
select helpers for the video= parameter. Replaces CONFIG_VIDEO_CMDLINE.

Other common code in drivers/video/ can be moved behind CONFIG_VIDEO,
which will simplify the Kconfig rules.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240118090721.7995-2-tzimmermann@suse.de

The relatively recently introduced drm/exec utility was using uint32_t
in its interface, which was then also carried over to drm/gpuvm.

Prefer u32 in new code and update drm/exec and drm/gpuvm accordingly.

Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240119090557.6360-1-thomas.hellstrom@linux.intel.com

Ensure the device has been setup correctly before registering the v4l2
async device, thus allowing userspace to access.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Fixes: 4c5211a1 ("[media] tc358743: register v4l2 asynchronous subdevice")
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240110090111.458115-1-alexander.stein@ew.tq-group.com

The patch completes the setting of CLKLANE_STOP for the imx8m{m,n,p}
platforms (i. e. not exynos).
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231218084354.508942-3-dario.binacchi@amarulasolutions.com

The synaptics-r63353 (panel-bridge) can only be configured in command mode.
So, samsung-dsim (bridge) must not be in display mode during the
prepare()/unprepare() of the panel-bridge. Setting the
"pre_enable_prev_first" flag to true allows the prepare() of the
panel-bridge to be called between the pre_enabled() and enabled() of the
bridge. So, the bridge can enter display mode only in the enabled().
The unprepare() of the panel-bridge is instead called between the disable()
and post_disable() of the bridge. So, the disable() must exit the display
mode (i .e. enter command mode) to allow the panel-bridge to receive DSI
commands.

samsung_dsim_atomic_pre_enable   -> command mode
r63353_panel_prepare             -> send DSI commands
samsung_dsim_atomic_enable       -> enter display mode

samsung_dsim_atomic_disable      -> exit display mode (command mode)
r63353_panel_unprepare           -> send DSI commands
samsung_dsim_atomic_post_disable
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231218084354.508942-2-dario.binacchi@amarulasolutions.com

Seems to be unused.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240112125158.2748-2-christian.koenig@amd.com

Pull more bcachefs updates from Kent Overstreet:
 "Some fixes, Some refactoring, some minor features:

   - Assorted prep work for disk space accounting rewrite

   - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
     makes our trigger context more explicit

   - A few fixes to avoid excessive transaction restarts on
     multithreaded workloads: fstests (in addition to ktest tests) are
     now checking slowpath counters, and that's shaking out a few bugs

   - Assorted tracepoint improvements

   - Starting to break up bcachefs_format.h and move on disk types so
     they're with the code they belong to; this will make room to start
     documenting the on disk format better.

   - A few minor fixes"

* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
  bcachefs: Improve inode_to_text()
  bcachefs: logged_ops_format.h
  bcachefs: reflink_format.h
  bcachefs; extents_format.h
  bcachefs: ec_format.h
  bcachefs: subvolume_format.h
  bcachefs: snapshot_format.h
  bcachefs: alloc_background_format.h
  bcachefs: xattr_format.h
  bcachefs: dirent_format.h
  bcachefs: inode_format.h
  bcachefs; quota_format.h
  bcachefs: sb-counters_format.h
  bcachefs: counters.c -> sb-counters.c
  bcachefs: comment bch_subvolume
  bcachefs: bch_snapshot::btime
  bcachefs: add missing __GFP_NOWARN
  bcachefs: opts->compression can now also be applied in the background
  bcachefs: Prep work for variable size btree node buffers
  bcachefs: grab s_umount only if snapshotting
  ...

Pull timer updates from Thomas Gleixner:
 "Updates for time and clocksources:

   - A fix for the idle and iowait time accounting vs CPU hotplug.

     The time is reset on CPU hotplug which makes the accumulated
     systemwide time jump backwards.

   - Assorted fixes and improvements for clocksource/event drivers"

* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
  clocksource/drivers/ep93xx: Fix error handling during probe
  clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
  clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
  clocksource/timer-riscv: Add riscv_clock_shutdown callback
  dt-bindings: timer: Add StarFive JH8100 clint
  dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs

Pull powerpc fixes from Aneesh Kumar:

 - Increase default stack size to 32KB for Book3S

Thanks to Michael Ellerman.

* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Increase default stack size to 32KB

Add line breaks - inode_to_text() is now much easier to read.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs_format.h has gotten too big; let's do some organizing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>