- 27 Aug, 2009 1 commit
-
-
Thomas Gleixner authored
Masking oneshot edge type interrupts is wrong as we might lose an interrupt which is issued when the threaded handler is handling the device. We can keep the irq unmasked safely as with edge type interrupts there is no danger of interrupt floods. If the threaded handler has not yet finished then IRQTF_RUNTHREAD is set which will keep the handler thread active. Debugged and verified in preempt-rt. Signed-off-by:Thomas Gleixner <tglx@linutronix.de>
-
- 17 Aug, 2009 3 commits
-
-
Thomas Gleixner authored
Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: -
Thomas Gleixner authored
Some interrupt chips are connected to a "slow" bus (i2c, spi ...). The bus access needs to sleep and therefor cannot be called in atomic contexts. Some of the generic interrupt management functions like disable_irq(), enable_irq() ... call interrupt chip functions with the irq_desc->lock held and interrupts disabled. This does not work for such devices. Provide a separate synchronization mechanism for such interrupt chips. The irq_chip structure is extended by two optional functions (bus_lock and bus_sync_and_unlock). The idea is to serialize the bus access for those operations in the core code so that drivers which are behind that bus operated interrupt controller do not have to worry about it and just can use the normal interfaces. To achieve this we add two function pointers to the irq_chip: bus_lock and bus_sync_unlock. bus_lock() is called to serialize access to the interrupt controller bus. Now the core code can issue chip->mask/unmask ... commands without changing the fast path code at all. The chip implementation merily stores that information in a chip private data structure and returns. No bus interaction as these functions are called from atomic context. After that bus_sync_unlock() is called outside the atomic context. Now the chip implementation issues the bus commands, waits for completion and unlocks the interrupt controller bus. The irq_chip implementation as pseudo code: struct irq_chip_data { struct mutex mutex; unsigned int irq_offset; unsigned long mask; unsigned long mask_status; } static void bus_lock(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); mutex_lock(&data->mutex); } static void mask(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); irq -= data->irq_offset; data->mask |= (1 << irq); } static void unmask(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); irq -= data->irq_offset; data->mask &= ~(1 << irq); } static void bus_sync_unlock(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); if (data->mask != data->mask_status) { do_bus_magic_to_set_mask(data->mask); data->mask_status = data->mask; } mutex_unlock(&data->mutex); } The device drivers can use request_threaded_irq, free_irq, disable_irq and enable_irq as usual with the only restriction that the calls need to come from non atomic context. Signed-off-by: -
Thomas Gleixner authored
For threaded interrupt handlers we expect the hard interrupt handler part to mask the interrupt on the originating device. The interrupt line itself is reenabled after the hard interrupt handler has executed. This requires access to the originating device from hard interrupt context which is not always possible. There are devices which can only be accessed via a bus (i2c, spi, ...). The bus access requires thread context. For such devices we need to keep the interrupt line masked until the threaded handler has executed. Add a new flag IRQF_ONESHOT which allows drivers to request that the interrupt is not unmasked after the hard interrupt context handler has been executed and the thread has been woken. The interrupt line is unmasked after the thread handler function has been executed. Note that for now IRQF_ONESHOT cannot be used with IRQF_SHARED to avoid complex accounting mechanisms. For oneshot interrupts the primary handler simply returns IRQ_WAKE_THREAD and does nothing else. A generic implementation irq_default_primary_handler() is provided to avoid useless copies all over the place. It is automatically installed when request_threaded_irq() is called with handler=NULL and thread_fn!=NULL. Signed-off-by:
-
- 16 Aug, 2009 1 commit
-
-
Guillaume Knispel authored
The triggered field of struct poll_wqueues introduced in commit 5f820f64 ("poll: allow f_op->poll to sleep"). It was first set to 1 in pollwake() (now __pollwake() ), tested and later set to 0 in poll_schedule_timeout(), but not initialized before. As a result when the process needs to sleep, triggered was likely to be non-zero even if pollwake() is not called before the first poll_schedule_timeout(), meaning schedule_hrtimeout_range() would not be called and an extra loop calling all ->poll() would be done. This patch initialize triggered to 0 in poll_initwait() so the ->poll() are not called twice before the process goes to sleep when it needs to. Signed-off-by:
Guillaume Knispel <gknispel@proformatique.com> Acked-by:
Tejun Heo <tj@kernel.org> Cc: stable@kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 14 Aug, 2009 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixesLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: GFS2: Fix permissions on "recover" file
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (38 commits) V4L/DVB (12441): siano: read buffer overflow V4L/DVB (12440): Use kzalloc for frontend states to have struct dvb_frontend properly V4L/DVB (12438): Read buffer overflow V4L/DVB (12437): dvb: siano uses/depends on INPUT V4L/DVB (12436): stk-webcam: read buffer overflow V4L/DVB (12432): em28xx: fix regression in Empire DualTV digital tuning V4L/DVB (12429): v4l2-ioctl: fix G_STD and G_PARM default handlers V4L/DVB (12428): hdpvr: add missing initialization of current_norm V4L/DVB (12424): soc-camera: fix recursive locking in .buf_queue() V4L/DVB (12422): media/zr364xx: fix build errors V4L/DVB (12405): em28xx-cards: move register 0x13 setting to the proper place V4L/DVB (12411): em28xx: Fix artifacts with Silvercrest webcam V4L/DVB (12410): em28xx: Move the non-board dependent part to be outside em28xx_pre_card_setup() V4L/DVB (12407): em28xx: Adjust Silvercrest xtal frequency V4L/DVB (12406): em28xx: fix: don't do image interlacing on webcams V4L/DVB (12403): em28xx: properly reports some em2710 chips V4L/DVB (12402): em28xx: fix: some em2710 chips use a different vendor ID V4L/DVB (12401): m9v011: add vflip/hflip controls to control mirror/upside down V4L/DVB (12400): em28xx: Allow changing fps on webcams V4L/DVB (12399): mt9v011: Add support for controlling frame rates ...
-
Steven Whitehouse authored
Although this file is only ever written and not read by userspace, it seems that the utils are opening this file O_RDWR, so we need to allow that. Also fixes the whitespace which seemed to be broken. Signed-off-by:Steven Whitehouse <swhiteho@redhat.com> Cc: David Teigland <teigland@redhat.com>
-
- 13 Aug, 2009 32 commits
-
-
Roel Kluin authored
With mode DEVICE_MODE_RAW_TUNER a read occurs past the end of smscore_fw_lkup[]. Subsequently an attempt is made to load the firmware from the resulting filename. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Matthias Schwarzott authored
This patch changes most frontend drivers to allocate their state structure via kzalloc and not kmalloc. This is done to properly initialize the embedded "struct dvb_frontend frontend" field, that they all have. The visible effect of this struct being uninitalized is, that the member "id" that is used to set the name of kernel thread is totally random. Some board drivers (for example cx88-dvb) set this "id" via videobuf_dvb_alloc_frontend but most do not. So I at least get random id values for saa7134, flexcop and ttpci based cards. It looks like this in dmesg: DVB: registering adapter 1 frontend -10551321 (ST STV0299 DVB-S) The related kernel thread then also gets a strange name like "kdvb-ad-1-fe--1". Cc: Michael Krufky <mkrufky@linuxtv.org> Cc: Steven Toth <stoth@linuxtv.org> Cc: Timothy Lee <timothy.lee@siriushk.com> Cc: Igor M. Liplianin <liplianin@me.by> Signed-off-by:
Matthias Schwarzott <zzam@gentoo.org> Acked-by:
Andreas Oberritter <obi@linuxtv.org> Signed-off-by:
-
Roel Kluin authored
parport[n] is checked before n < MAX_CAMS Signed-off-by:
-
Randy Dunlap authored
siano uses input_*() functions so it should depend on INPUT to prevent build errors: ERROR: "input_event" [drivers/media/dvb/siano/sms1xxx.ko] undefined! ERROR: "input_register_device" [drivers/media/dvb/siano/sms1xxx.ko] undefined! ERROR: "input_free_device" [drivers/media/dvb/siano/sms1xxx.ko] undefined! ERROR: "input_unregister_device" [drivers/media/dvb/siano/sms1xxx.ko] undefined! ERROR: "input_allocate_device" [drivers/media/dvb/siano/sms1xxx.ko] undefined! Cc: Michael Krufky <mkrufky@linuxtv.org> Cc: Uri Shkolnik <uris@siano-ms.com> Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Roel Kluin authored
It tested the value of stk_sizes[i].m before checking whether i was in range. Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
Devin Heitmueller authored
Restore support for digital tuning caused by regression during introduction of disable_i2c_gate parameter to zl10353 driver. Thanks to user "Xwang" for reporting the problem and testing the fix Cc: Xwang <xwang1976@email.it> Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Hans Verkuil authored
The v4l core supplies default handlers for G_STD and G_PARM. However, both default handlers are buggy. This patch fixes the following: 1) If no g_std is supplied and current_norm == 0, then this driver does not support TV video standards (e.g. a radio or webcam driver). Return -EINVAL. This ensures that there is no bogus VIDIOC_G_STD support for such drivers. 2) The default VIDIOC_G_PARM handler used current_norm instead of first checking if the driver supported g_std and calling that to get the norm. It also didn't check if current_norm was 0, since in that case the driver does not support TV standards (or no standard was set at all) and the default handler should return -EINVAL. Note that I am very unhappy with these default handlers: I think they basically behave like some very strange and unexpected side-effect. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Drivers should either set current_norm or supply a g_std callback. The hdpvr driver does neither. Since it initializes to a 60 Hz format I've initialized the current_norm to NTSC | PAL_M | PAL_60 which is the 60 Hz subset of tvnorms. Cc: Janne Grunau <j@jannau.net> Signed-off-by:
-
Guennadi Liakhovetski authored
The .buf_queue() V4L2 driver method is called under spinlock_irqsave(q->irqlock,...), don't take the lock again inside the function. Reported-by:
Antonio Ospite <ospite@studenti.unina.it> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Randy Dunlap authored
Fix build errors in zr364xx by adding selects: zr364xx.c:(.text+0x195ed7): undefined reference to `videobuf_streamon' zr364xx.c:(.text+0x196030): undefined reference to `videobuf_dqbuf' zr364xx.c:(.text+0x1960c4): undefined reference to `videobuf_qbuf' zr364xx.c:(.text+0x196123): undefined reference to `videobuf_querybuf' zr364xx.c:(.text+0x196182): undefined reference to `videobuf_reqbufs' zr364xx.c:(.text+0x196224): undefined reference to `videobuf_queue_is_busy' zr364xx.c:(.text+0x196390): undefined reference to `videobuf_vmalloc_free' zr364xx.c:(.text+0x196571): undefined reference to `videobuf_iolock' zr364xx.c:(.text+0x196678): undefined reference to `videobuf_mmap_mapper' zr364xx.c:(.text+0x196760): undefined reference to `videobuf_poll_stream' zr364xx.c:(.text+0x19689a): undefined reference to `videobuf_read_one' zr364xx.c:(.text+0x1969ec): undefined reference to `videobuf_mmap_free' zr364xx.c:(.text+0x197862): undefined reference to `videobuf_queue_vmalloc_init' zr364xx.c:(.text+0x197a28): undefined reference to `videobuf_streamoff' zr364xx.c:(.text+0x198203): undefined reference to `videobuf_to_vmalloc' zr364xx.c:(.text+0x198603): undefined reference to `videobuf_streamoff' drivers/built-in.o: In function `free_buffer': zr364xx.c:(.text+0x19930c): undefined reference to `videobuf_vmalloc_free' drivers/built-in.o: In function `zr364xx_open': zr364xx.c:(.text+0x19a7de): undefined reference to `videobuf_queue_vmalloc_init' drivers/built-in.o: In function `read_pipe_completion': zr364xx.c:(.text+0x19b17f): undefined reference to `videobuf_to_vmalloc' Signed-off-by:
-
Mauro Carvalho Chehab authored
Register 0x13 seems to be a sort of image control, maybe gamma, white level or black level. Lower values produce better images, while higher values increases the contrast and shifts colors to green. 0xff produces a black image. This register is not Silvercrest-specific, so its code should be moved to a better place. If this register is left alone, a random value can be found at the register, producing weird results. While here, let's remove register 0x0d, as it had no noticed effect at the image. Signed-off-by: -
Mauro Carvalho Chehab authored
Silvercrest mt9v011 sensor produces a 640x480 image. However, previously, the code were getting only half of the lines and merging two consecutive frames to "produce" a 640x480 image. With the addition of progressive mode, now em28xx is working with a full image. However, when the number of lines is bigger than 240, the beginning of some odd lines are filled with blank. After lots of testing, and physically checking the device for a Xtal, it was noticed experimentally that mt9v011 is using em28xx XCLK as its clock. Due to that, changing XCLK value changes the maximum speed of the stream. At the tests, it were possible to produce up to 32 fps, using a 30 MHz XCLK. However, at that rate, the artifacts happen even at 320x240. Lower values of XCLK produces artifacts only at 640x480. At some values of xclk (for example XCLKK = 6 MHz, 640x480), it is possible to see an invalid sucession of artifacts with this pattern: .xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ..xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ...xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ....xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx .xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ..xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ...xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ....xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx (where the dots represent the blanked pixels) So, it seems that a waveform in the format of a ramp is interferring at the image. The cause of this interference is currently unknown. Some possibilities are: - electrical interference (maybe this device is broken?); - some issue at mt9v011 programming; - some bug at em28xx chip. So, for now, let's be conservative and use a value of XCLK that we know for sure that it won't cause artifacts. As I'm waiting for more of such devices with different em28xx chipset revisions, I'll have the opportunity to double check the issue with other pieces of hardware. Later patches can vary XCLK depending on the vertical resolutions, if a proper fix is not discovered. Signed-off-by: -
Mauro Carvalho Chehab authored
em28xx_pre_card_setup() is meant to contain board-specific initialization. Also, as autodetection sometimes occur only after having i2c bus enabled, this function may need to be called later. Moving those setups to happen outside the function avoids calling it twice without need and without duplicating output lines at dmesg. Signed-off-by: -
Mauro Carvalho Chehab authored
We don't know the xtal frequency of Silvercrest, but we need to have some value in order to allow controlling the frame rate frequency. The value is probably still wrong, since the manufacturer announces this device as being capable of 30fps, but the maximum we can get is 13.5 fps. Signed-off-by: -
Mauro Carvalho Chehab authored
Due to historical reasons, em28xx driver gets two consecutive frames and fold them into an unique framing, doing interlacing. While this works fine for TV images, this produces two bad effects with webcams: 1) webcam images are progressive. Merging two consecutive images produce interlacing artifacts on the image; 2) since the driver needs to get two frames, it reduces the maximum frame rate by two. Signed-off-by: -
Mauro Carvalho Chehab authored
As reported by hermann pitton <hermann-pitton@arcor.de>, some devices has a different chip id for em2710 (likely the older ones): em28xx: New device @ 480 Mbps (eb1a:2710, interface 0, class 0) em28xx #0: Identified as EM2710/EM2750/EM2751 webcam grabber (card=22) em28xx #0: em28xx chip ID = 17 Signed-off-by: -
Mauro Carvalho Chehab authored
Thanks to hermann pitton <hermann-pitton@arcor.de> for pointing this new variation. Tested-by:
hermann pitton <hermann-pitton@arcor.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
em28xx doesn't have temporal scaling. However, on webcams, sensors are capable of changing the output rate. So, VIDIOC_[G|S]_PARM ioctls should be passed to the sensor for it to properly set frame rate. Signed-off-by: -
Mauro Carvalho Chehab authored
Implement g_parm/s_parm ioctls. Those are used to check the current frame rate (in fps) and to set it to a value. In practice, there are only 15 possible different speeds, due to chip limits. Signed-off-by: -
Devin Heitmueller authored
A user discovered that the Geniatech x8000 encountered a regression when the xc3028 power management was introduced. The xc3028 never recovers after setting the powerdown register, which is probably because the xc3028 reset GPIO is not properly configured. Since I do not have access to the hardware and thus cannot determine the correct GPIO configuration, just disable xc3028 power management on this board, which fixes the regression. Thanks to user "ritec" for reporting the issue and testing the fix. Cc: rictec <rictec@netcabo.pt> Signed-off-by:
-
Devin Heitmueller authored
The introduction of the zl10353 i2c gate control broke support for the Geniatech board (which is not behind an i2 gate). Add the needed parameter. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
Michael Krufky <mkrufky@kernellabs.com> Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Remove the following build warning: sms-cards.c: In function 'sms_board_event': sms-cards.c:120: warning: unused variable 'board' Thanks to Hans Verkuil for pointing this out. The problem code has been #if 0'd for now, this will likely be used again in the future, once the event interface is complete. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Laurent Pinchart authored
The iSight sends non-UVC status events through the interrupt endpoint. Those invalid events are reported to the kernel log, resulting in a log flood. Only log the events when the UVC_TRACE_STATUS flag is set. Signed-off-by:
Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by:
-
Laurent Pinchart authored
Commit 50144aee broke the Samsung NC10 netbook webcam. Instead of applying the FIX_BANDWIDTH quirk to all ViMicro devices, list the devices explicitly. Signed-off-by:
-
Michael Krufky authored
The current GPIO configuration breaks all Hauppauge devices. The code being removed affects Hauppauge devices only, and is the cause of the breakage. Signed-off-by:
-
Brian Johnson authored
MAINTAINERS | 8 ++++++++ Signed-off-by:
Brian Johnson <brijohn@gmail.com> Acked-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Nils Kassube authored
Moving BOOT fixes problem. Signed-off-by:
Nils Kassube <kassube@gmx.net> Acked-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Michael Krufky authored
Currently, the VIDIOC_S_STD ioctl just returns -EINVAL regardless of the norm passed. This patch sets cx23885_mpeg_template.tvnorms and cx23885_mpeg_template.current_norm so that the VIDIOC_S_STD will work. Thanks to Joseph Yasi for pointing this out, even though this particular fix was already pushed into a development repository, merge priority of this changeset has been escalated as a result of Joseph posting this identical patch. Signed-off-by:
Joseph A. Yasi <joe.yasi@gmail.com> Reviewed-by:
Steven Toth <stoth@kernellabs.com> Signed-off-by:
-
Sohail Syyed authored
Current tip is broken and does not switch back to DVB-T correctly Signed-off-by:
Sohail Syyed <linuxtv@hubstar.net> Signed-off-by:
-
