- 16 Aug, 2021 2 commits
-
-
Dan Carpenter authored
This function had some left over code that returned 1 on error instead negative error codes. Convert everything to use negative error codes. The caller treats all non-zero returns the same so this does not affect run time. A couple places set "rc" instead of "status" so those error paths ended up returning success by mistake. Get rid of the "rc" variable and use "status" everywhere. Remove the bogus "status = 0" initialization, as a future proofing measure so the compiler will warn about uninitialized error codes. Link: https://lore.kernel.org/r/20210810084753.GD23810@kili Fixes: ace7f46b ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Acked-by:
Manish Rangankar <mrangankar@marvell.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Dan Carpenter authored
Return -EINVAL on failure instead of success. Link: https://lore.kernel.org/r/20210810084613.GB23810@kili Fixes: a91aaae0 ("scsi: smartpqi: allow for larger raid maps") Signed-off-by:
-
- 13 Aug, 2021 1 commit
-
-
Martin K. Petersen authored
Use the SCSI midlayer interfaces to query protection interval, reference tag, and per-command DIX flags Link: https://lore.kernel.org/r/20210806040023.5355-4-martin.petersen@oracle.com Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Acked-by:
Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by:
-
- 12 Aug, 2021 37 commits
-
-
Nilesh Javali authored
Link: https://lore.kernel.org/r/20210810043720.1137-15-njavali@marvell.comReviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
Nilesh Javali <njavali@marvell.com> Signed-off-by:
-
Saurav Kashyap authored
The first invocation of function find_first_zero_bit will return 0 and queue_id gets set to 0. An index of queue_pair_map also gets set to 0. qpair_id = find_first_zero_bit(ha->qpair_qid_map, ha->max_qpairs); set_bit(qpair_id, ha->qpair_qid_map); ha->queue_pair_map[qpair_id] = qpair; In the alloc_queue callback driver checks the map, if queue is already allocated: ha->queue_pair_map[qidx] This works fine as long as max_qpairs is greater than nvme_max_hw_queues(8) since the size of the queue_pair_map is equal to max_qpair. In case nr_cpus is less than 8, max_qpairs is less than 8. This creates wrong value returned as qpair. [ 1572.353669] qla2xxx [0000:24:00.3]-2121:6: Returning existing qpair of 4e00000000000000 for idx=2 [ 1572.354458] general protection fault: 0000 [#1] SMP PTI [ 1572.354461] CPU: 1 PID: 44 Comm: kworker/1:1H Kdump: loaded Tainted: G IOE --------- - - 4.18.0-304.el8.x86_64 #1 [ 1572.354462] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 03/01/2013 [ 1572.354467] Workqueue: kblockd blk_mq_run_work_fn [ 1572.354485] RIP: 0010:qla_nvme_post_cmd+0x92/0x760 [qla2xxx] [ 1572.354486] Code: 84 24 5c 01 00 00 00 00 b8 0a 74 1e 66 83 79 48 00 0f 85 a8 03 00 00 48 8b 44 24 08 48 89 ee 4c 89 e7 8b 50 24 e8 5e 8e 00 00 <f0> 41 ff 47 04 0f ae f0 41 f6 47 24 04 74 19 f0 41 ff 4f 04 b8 f0 [ 1572.354487] RSP: 0018:ffff9c81c645fc90 EFLAGS: 00010246 [ 1572.354489] RAX: 0000000000000001 RBX: ffff8ea3e5070138 RCX: 0000000000000001 [ 1572.354490] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8ea4c866b800 [ 1572.354491] RBP: ffff8ea4c866b800 R08: 0000000000005010 R09: ffff8ea4c866b800 [ 1572.354492] R10: 0000000000000001 R11: 000000069d1ca3ff R12: ffff8ea4bc460000 [ 1572.354493] R13: ffff8ea3e50702b0 R14: ffff8ea4c4c16a58 R15: 4e00000000000000 [ 1572.354494] FS: 0000000000000000(0000) GS:ffff8ea4dfd00000(0000) knlGS:0000000000000000 [ 1572.354495] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1572.354496] CR2: 000055884504fa58 CR3: 00000005a1410001 CR4: 00000000000606e0 [ 1572.354497] Call Trace: [ 1572.354503] ? check_preempt_curr+0x62/0x90 [ 1572.354506] ? dma_direct_map_sg+0x72/0x1f0 [ 1572.354509] ? nvme_fc_start_fcp_op.part.32+0x175/0x460 [nvme_fc] [ 1572.354511] ? blk_mq_dispatch_rq_list+0x11c/0x730 [ 1572.354515] ? __switch_to_asm+0x35/0x70 [ 1572.354516] ? __switch_to_asm+0x41/0x70 [ 1572.354518] ? __switch_to_asm+0x35/0x70 [ 1572.354519] ? __switch_to_asm+0x41/0x70 [ 1572.354521] ? __switch_to_asm+0x35/0x70 [ 1572.354522] ? __switch_to_asm+0x41/0x70 [ 1572.354523] ? __switch_to_asm+0x35/0x70 [ 1572.354525] ? entry_SYSCALL_64_after_hwframe+0xb9/0xca [ 1572.354527] ? __switch_to_asm+0x41/0x70 [ 1572.354529] ? __blk_mq_sched_dispatch_requests+0xc6/0x170 [ 1572.354531] ? blk_mq_sched_dispatch_requests+0x30/0x60 [ 1572.354532] ? __blk_mq_run_hw_queue+0x51/0xd0 [ 1572.354535] ? process_one_work+0x1a7/0x360 [ 1572.354537] ? create_worker+0x1a0/0x1a0 [ 1572.354538] ? worker_thread+0x30/0x390 [ 1572.354540] ? create_worker+0x1a0/0x1a0 [ 1572.354541] ? kthread+0x116/0x130 [ 1572.354543] ? kthread_flush_work_fn+0x10/0x10 [ 1572.354545] ? ret_from_fork+0x35/0x40 Fix is to use index 0 for admin and first IO queue. Link: https://lore.kernel.org/r/20210810043720.1137-14-njavali@marvell.com Fixes: e84067d7 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration") Cc: stable@vger.kernel.org Reviewed-by:Saurav Kashyap <skashyap@marvell.com> Signed-off-by:
-
Saurav Kashyap authored
The MSI-X and MSI calls fails in kdump kernel. Because of this qla2xxx_create_qpair() fails leading to .create_queue callback failure. The fix is to return existing qpair instead of allocating new one and allocate a single hw queue. [ 19.975838] qla2xxx [0000:d8:00.1]-00c7:11: MSI-X: Failed to enable support, giving up -- 16/-28. [ 19.984885] qla2xxx [0000:d8:00.1]-0037:11: Falling back-to MSI mode -- ret=-28. [ 19.992278] qla2xxx [0000:d8:00.1]-0039:11: Falling back-to INTa mode -- ret=-28. .. .. .. [ 21.141518] qla2xxx [0000:d8:00.0]-2104:2: qla_nvme_alloc_queue: handle 00000000e7ee499d, idx =1, qsize 32 [ 21.151166] qla2xxx [0000:d8:00.0]-0181:2: FW/Driver is not multi-queue capable. [ 21.158558] qla2xxx [0000:d8:00.0]-2122:2: Failed to allocate qpair [ 21.164824] nvme nvme0: NVME-FC{0}: reset: Reconnect attempt failed (-22) [ 21.171612] nvme nvme0: NVME-FC{0}: Reconnect attempt in 2 seconds Link: https://lore.kernel.org/r/20210810043720.1137-13-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: -
Saurav Kashyap authored
Avoid allocating firmware dump and only allocate a single queue for a kexec kernel. Link: https://lore.kernel.org/r/20210810043720.1137-12-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by:
-
Arun Easi authored
Suppress logging of retryable errors. These can still be seen if extended logging is enabled. Link: https://lore.kernel.org/r/20210810043720.1137-11-njavali@marvell.comReviewed-by:
Arun Easi <aeasi@marvell.com> Signed-off-by:
-
Quinn Tran authored
When user creates multiple NPIVs, the switch capabilities field is checked before a vport is allowed to be created. This field is being toggled if a switch scan is in progress. This creates erroneous reject of vport create. Link: https://lore.kernel.org/r/20210810043720.1137-10-njavali@marvell.comReviewed-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
-
Quinn Tran authored
On NPIV delete, the VPort is taken off a linked list in an unsafe manner. The check for VPort refcount should be done behind lock before taking off the element. [ 2733.016907] general protection fault: 0000 [#1] SMP NOPTI [ 2733.016908] qla2xxx [0000:22:00.1]-7088:27: VP[4] deleted. [ 2733.016912] CPU: 22 PID: 23481 Comm: qla2xxx_15_dpc Kdump: loaded Tainted: G OE KX 5.3.18-47-default #1 SLE15-SP3 [ 2733.016914] Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 2.1.4 02/17/2021 [ 2733.016929] RIP: 0010:qla2x00_abort_isp+0x90/0x850 [qla2xxx] [ 2733.016933] RSP: 0018:ffffb9cfc91efe98 EFLAGS: 00010087 [ 2733.016935] RAX: 0000000000000292 RBX: dead000000000100 RCX: 0000000000000000 [ 2733.016936] RDX: 0000000000000001 RSI: ffff944bfeb99558 RDI: ffff944bfc4b4488 [ 2733.016937] RBP: ffff944bfc4b2868 R08: 00000000000187a2 R09: 0000000000000001 [ 2733.016937] R10: ffffb9cfc91efcc8 R11: 0000000000000001 R12: ffff944bfc4b4000 [ 2733.016938] R13: ffff944bfc4b4870 R14: ffff944bfc4b4488 R15: ffff944bda895c80 [ 2733.016939] FS: 0000000000000000(0000) GS:ffff944bfeb80000(0000) knlGS:0000000000000000 [ 2733.016940] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2733.016940] CR2: 00007fc173e74458 CR3: 0000001ff57de000 CR4: 0000000000350ee0 [ 2733.016941] Call Trace: [ 2733.016951] qla2xxx_pci_error_detected+0x190/0x190 [qla2xxx] [ 2733.016957] qla2x00_do_dpc+0x560/0xa10 [qla2xxx] [ 2733.016962] kthread+0x10d/0x130 [ 2733.016963] kthread_park+0xa0/0xa0 [ 2733.016966] ret_from_fork+0x22/0x40 Link: https://lore.kernel.org/r/20210810043720.1137-9-njavali@marvell.comReviewed-by:
-
Quinn Tran authored
Over time, fcport->port_type became a flag field. The flags within this field were not defined properly. This caused external tools to read wrong info. Link: https://lore.kernel.org/r/20210810043720.1137-8-njavali@marvell.comReviewed-by:
-
Quinn Tran authored
Add debug print of 64G link speed. Link: https://lore.kernel.org/r/20210810043720.1137-7-njavali@marvell.comReviewed-by:
-
Arun Easi authored
To be consistent with other OS drivers, register OS name and version in FDMI-1 fabric registration. Link: https://lore.kernel.org/r/20210810043720.1137-6-njavali@marvell.comReviewed-by:
-
Saurav Kashyap authored
Add changes to support FCP2 Target. Link: https://lore.kernel.org/r/20210810043720.1137-5-njavali@marvell.comReviewed-by:
-
Quinn Tran authored
Adjust request/respond queue size for 28xx to match 27xx adapter. Link: https://lore.kernel.org/r/20210810043720.1137-4-njavali@marvell.comReviewed-by:
-
Arun Easi authored
Add a mechanism to trigger MPI pause for debugging purposes. Link: https://lore.kernel.org/r/20210810043720.1137-2-njavali@marvell.comReviewed-by:
-
Shai Malin authored
Driver fastpath employs doorbells to indicate to the device that work is available. Each doorbell translates to a message sent to the device over PCI. These messages are queued by the doorbell queue HW block, and handled by the HW. If a sufficient amount of CPU cores are sending messages at a sufficient rate, the queue can overflow, and messages can be dropped. There are many entities in the driver which can send doorbell messages. When overflow happens, a fatal HW attention is indicated, and the Doorbell HW block stops accepting new doorbell messages until recovery procedure is done. When overflow occurs, all doorbells are dropped. Since doorbells are aggregatives, if more doorbells are sent nothing has to be done. But if the "last" doorbell is dropped, the doorbelling entity doesn’t know this happened, and may wait forever for the device to perform the action. The doorbell recovery mechanism addresses just that - it sends the last doorbell of every entity. [mkp: fix missing brackets reported by Guenter Roeck] Link: https://lore.kernel.org/r/20210804221412.5048-1-smalin@marvell.comCo-developed-by:
Shai Malin <smalin@marvell.com> Signed-off-by:
-
Martin K. Petersen authored
Resolve mpt3sas conflict between 5.14/scsi-fixes and 5.15/scsi-staging reported by sfr. Signed-off-by: -
Martin K. Petersen authored
Use scsi_prot_ref_tag() instead of scsi_get_lba() to get the reference tag for a given I/O. Link: https://lore.kernel.org/r/20210806040023.5355-3-martin.petersen@oracle.comReviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Martin K. Petersen authored
Link: https://lore.kernel.org/r/20210806040023.5355-2-martin.petersen@oracle.com Cc: Bart Van Assche <bvanassche@acm.org> Reviewed-by:
-
Bart Van Assche authored
Since all scsi_cmnd.request users are gone, remove the request pointer from struct scsi_cmnd. Link: https://lore.kernel.org/r/20210809230355.8186-53-bvanassche@acm.org Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
Martin K. Petersen authored
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-1-bvanassche@acm.orgSigned-off-by:
-
Martin K. Petersen authored
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-1-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-52-bvanassche@acm.orgAcked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Bart Van Assche authored
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-51-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-50-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-49-bvanassche@acm.orgAcked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Bart Van Assche authored
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-48-bvanassche@acm.orgReviewed-by:
Daejun Park <daejun7.park@samsung.com> Signed-off-by:
-
Bart Van Assche authored
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-47-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-46-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-45-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-44-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-43-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-42-bvanassche@acm.orgAcked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Bart Van Assche authored
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-41-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-40-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-39-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. Remove the unused CMD_REQUEST() macro. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-38-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-37-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-36-bvanassche@acm.orgSigned-off-by:
-
