- GSC loading fix (Daniele)
- PCODE mutex fix (Matt)
- Suspend/Resume fixes (Maarten, Imre)
- RPM fixes (Rodrigo)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZtmyFvDfFLPbuf6A@intel.com

Merge tag 'drm-intel-fixes-2024-09-05' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes

- drm/i915: Do not attempt to load the GSC multiple times (Daniele Ceraolo Spurio)
- drm/i915: Fix readout degamma_lut mismatch on ilk/snb (Ville Syrjälä)
- drm/i915/fence: Mark debug_fence_init_onstack() with __maybe_unused (Andy Shevchenko)
- drm/i915/fence: Mark debug_fence_free() with __maybe_unused (Andy Shevchenko)
- drm/i915/display: Add mechanism to use sink model when applying quirk [display] (Jouni Högander)
- drm/i915/display: Increase Fast Wake Sync length as a quirk [display] (Jouni Högander)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Ztlo2hVO4SBvfAnq@linux

Fix circular locking dependency on runtime suspend.

<4> [74.952215] ======================================================
<4> [74.952217] WARNING: possible circular locking dependency detected
<4> [74.952219] 6.10.0-rc7-xe #1 Not tainted
<4> [74.952221] ------------------------------------------------------
<4> [74.952223] kworker/7:1/82 is trying to acquire lock:
<4> [74.952226] ffff888120548488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_modeset_lock_all+0x40/0x1e0 [drm]
<4> [74.952260]
but task is already holding lock:
<4> [74.952262] ffffffffa0ae59c0 (xe_pm_runtime_lockdep_map){+.+.}-{0:0}, at: xe_pm_runtime_suspend+0x2f/0x340 [xe]
<4> [74.952322]
which lock already depends on the new lock.

The commit 'b1d90a86 ("drm/xe: Use the encoder suspend helper also used
by the i915 driver")' didn't do anything wrong. It actually fixed a
critical bug, because the encoder_suspend was never getting actually
called because it was returning if (has_display(xe)) instead of
if (!has_display(xe)). However, this ended up introducing the encoder
suspend calls in the runtime routines as well, causing the circular
locking dependency.

Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2304
Fixes: b1d90a86 ("drm/xe: Use the encoder suspend helper also used by the i915 driver")
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830183507.298351-2-rodrigo.vivi@intel.comSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 8da19441)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Enable/Disable user access only during system suspend/resume.
This should not happen during runtime s/r

v2: rebased
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823112148.327015-2-vinod.govindapillai@intel.com
(cherry picked from commit a64e7e5b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Suspend fbdev sooner, and disable user access before suspending to
prevent some races. I've noticed this when comparing xe suspend to
i915's.

Matches the following commits from i915:
24b412b1 ("drm/i915: Disable intel HPD poll after DRM poll init/enable")
1ef28d86 ("drm/i915: Suspend the framebuffer console earlier during system suspend")
bd738d85 ("drm/i915: Prevent modesets during driver init/shutdown")

Thanks to Imre for pointing me to those commits.

Driver shutdown is currently missing, but I have some idea how to
implement it next.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240806105044.596842-2-maarten.lankhorst@linux.intel.comSigned-off-by: Maarten Lankhorst,,, <maarten.lankhorst@linux.intel.com>
(cherry picked from commit 492be2a0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Fixes this missed case:

xe 0000:00:02.0: [drm] Missing outer runtime PM protection
WARNING: CPU: 99 PID: 1455 at drivers/gpu/drm/xe/xe_pm.c:564 xe_pm_runtime_get_noresume+0x48/0x60 [xe]
Call Trace:
<TASK>
? show_regs+0x67/0x70
? __warn+0x94/0x1b0
? xe_pm_runtime_get_noresume+0x48/0x60 [xe]
? report_bug+0x1b7/0x1d0
? handle_bug+0x46/0x80
? exc_invalid_op+0x19/0x70
? asm_exc_invalid_op+0x1b/0x20
? xe_pm_runtime_get_noresume+0x48/0x60 [xe]
xe_device_declare_wedged+0x91/0x280 [xe]
gt_reset_worker+0xa2/0x250 [xe]

v2: Also move get and get the right Fixes tag (Himal, Brost)

Fixes: fb74b205 ("drm/xe: Introduce a simple wedged state")
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830183507.298351-1-rodrigo.vivi@intel.comSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit bc947d9a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

There's only one instance of the pcode per tile, and for GT-related
accesses both the primary and media GT share the same register
interface.  Since Xe was using per-GT locking, the pcode mutex wasn't
actually protecting everything that it should since concurrent accesses
related to a tile's primary GT and media GT were possible.

Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829220619.789159-5-matthew.d.roper@intel.com
(cherry picked from commit 3034cc81)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

The GSC HW is only reset by driver FLR or D3cold entry. We don't support
the former at runtime, while the latter is only supported on DGFX, for
which we don't support GSC. Therefore, if GSC failed to load previously
there is no need to try again because the HW is stuck in the error state.

An assert has been added so that if we ever add DGFX support we'll know
we need to handle the D3 case.

v2: use "< 0" instead of "!= 0" in the FW state error check (Julia).

Fixes: dd0e89e5 ("drm/xe/gsc: GSC FW load")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828215158.2743994-2-daniele.ceraolospurio@intel.com
(cherry picked from commit 2160f6f6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

In commit "drm/i915/display: Increase number of fast wake precharge pulses"
we were increasing Fast Wake sync pulse length to fix problems observed on
Dell Precision 5490 laptop with AUO panel. Later we have observed this is
causing problems on other panels.

Fix these problems by increasing Fast Wake sync pulse length as a quirk
applied for Dell Precision 5490 with problematic panel.

Fixes: f7777286 ("drm/i915/display: Increase number of fast wake precharge pulses")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Closes: http://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9739
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2246
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11762Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Link: https://patchwork.freedesktop.org/patch/msgid/20240902064241.1020965-3-jouni.hogander@intel.com
(cherry picked from commit fcba2ed6)
Requires: 43cf50eb ("drm/i915/display: Add mechanism to use sink model when applying quirk")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Currently there is no way to apply quirk on device only if certain panel
model is installed. This patch implements such mechanism by adding new
quirk type intel_dpcd_quirk which contains also sink_oui and sink_device_id
fields and using also them to figure out if applying quirk is needed.

New intel_init_dpcd_quirks is added and called after drm_dp_read_desc with
proper sink device identity read from dpcdc.

v3:
  - !mem_is_zero fixed to mem_is_zero
v2:
  - instead of using struct intel_quirk add new struct intel_dpcd_quirk
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902064241.1020965-2-jouni.hogander@intel.com
(cherry picked from commit b3b91369)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

When debug_fence_free() is unused
(CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS=n), it prevents kernel builds
with clang, `make W=1` and CONFIG_WERROR=y:

.../i915_sw_fence.c:118:20: error: unused function 'debug_fence_free' [-Werror,-Wunused-function]
  118 | static inline void debug_fence_free(struct i915_sw_fence *fence)
      |                    ^~~~~~~~~~~~~~~~

Fix this by marking debug_fence_free() with __maybe_unused.

See also commit 6863f564 ("kbuild: allow Clang to find unused static
inline functions for W=1 build").

Fixes: fc158405 ("drm/i915: Integrate i915_sw_fence with debugobjects")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-3-andriy.shevchenko@linux.intel.comSigned-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 8be4dce5)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

When debug_fence_init_onstack() is unused (CONFIG_DRM_I915_SELFTEST=n),
it prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y:

.../i915_sw_fence.c:97:20: error: unused function 'debug_fence_init_onstack' [-Werror,-Wunused-function]
   97 | static inline void debug_fence_init_onstack(struct i915_sw_fence *fence)
      |                    ^~~~~~~~~~~~~~~~~~~~~~~~

Fix this by marking debug_fence_init_onstack() with __maybe_unused.

See also commit 6863f564 ("kbuild: allow Clang to find unused static
inline functions for W=1 build").

Fixes: 214707fc ("drm/i915/selftests: Wrap a timer into a i915_sw_fence")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-2-andriy.shevchenko@linux.intel.comSigned-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 5bf47205)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

On ilk/snb the pipe may be configured to place the LUT before or
after the CSC depending on various factors, but as there is only
one LUT (no split mode like on IVB+) we only advertise a gamma_lut
and no degamma_lut in the uapi to avoid confusing userspace.

This can cause a problem during readout if the VBIOS/GOP enabled
the LUT in the pre CSC configuration. The current code blindly
assigns the results of the readout to the degamma_lut, which will
cause a failure during the next atomic_check() as we aren't expecting
anything to be in degamma_lut since it's not visible to userspace.

Fix the problem by assigning whatever LUT we read out from the
hardware into gamma_lut.

Cc: stable@vger.kernel.org
Fixes: d2559299 ("drm/i915: Make ilk_read_luts() capable of degamma readout")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11608Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240710124137.16773-1-ville.syrjala@linux.intel.comReviewed-by: Uma Shankar <uma.shankar@intel.com>
(cherry picked from commit 33eca84d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

If the GSC FW fails to load the GSC HW hangs permanently; the only ways
to recover it are FLR or D3cold entry, with the former only being
supported on driver unload and the latter only on DGFX, for which we
don't need to load the GSC. Therefore, if GSC fails to load there is no
need to try again because the HW is stuck in the error state and the
submission to load the FW would just hang the GSCCS.

Note that, due to wa_14015076503, on MTL the GuC escalates all GSCCS
hangs to full GT resets, which would trigger a new attempt to load the
GSC FW in the post-reset HW re-init; this issue is also fixed by not
attempting to load the GSC FW after an error.

Fixes: 15bd4a67 ("drm/i915/gsc: GSC firmware loading")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v6.3+
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820215952.2290807-1-daniele.ceraolospurio@intel.com
(cherry picked from commit 03ded4d4)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Pull smb client fixes from Steve French:

 - copy_file_range fix

 - two read fixes including read past end of file rc fix and read retry
   crediting fix

 - falloc zero range fix

* tag 'v6.11-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix FALLOC_FL_ZERO_RANGE to preflush buffered part of target region
  cifs: Fix copy offload to flush destination region
  netfs, cifs: Fix handling of short DIO read
  cifs: Fix lack of credit renegotiation on read retry

Push bcachefs fixes from Kent Overstreet:
 "The data corruption in the buffered write path is troubling; inode
  lock should not have been able to cause that...

   - Fix a rare data corruption in the rebalance path, caught as a nonce
     inconsistency on encrypted filesystems

   - Revert lockless buffered write path

   - Mark more errors as autofix"

* tag 'bcachefs-2024-08-21' of https://github.com/koverstreet/bcachefs:
  bcachefs: Mark more errors as autofix
  bcachefs: Revert lockless buffered IO path
  bcachefs: Fix bch2_extents_match() false positive
  bcachefs: Fix failure to return error in data_update_index_update()

errors that are known to always be safe to fix should be autofix: this
should be most errors even at this point, but that will need some
thorough review.

note that errors are still logged in the superblock, so we'll still know
that they happened.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We had a report of data corruption on nixos when building installer
images.

https://github.com/NixOS/nixpkgs/pull/321055#issuecomment-2184131334

It seems that writes are being dropped, but only when issued by QEMU,
and possibly only in snapshot mode. It's undetermined if it's write
calls are being dropped or dirty folios.

Further testing, via minimizing the original patch to just the change
that skips the inode lock on non appends/truncates, reveals that it
really is just not taking the inode lock that causes the corruption: it
has nothing to do with the other logic changes for preserving write
atomicity in corner cases.

It's also kernel config dependent: it doesn't reproduce with the minimal
kernel config that ktest uses, but it does reproduce with nixos's distro
config. Bisection the kernel config initially pointer the finger at page
migration or compaction, but it appears that was erroneous; we haven't
yet determined what kernel config option actually triggers it.

Sadly it appears this will have to be reverted since we're getting too
close to release and my plate is full, but we'd _really_ like to fully
debug it.

My suspicion is that this patch is exposing a preexisting bug - the
inode lock actually covers very little in IO paths, and we have a
different lock (the pagecache add lock) that guards against races with
truncate here.

Fixes: 7e64c86c ("bcachefs: Buffered write path now can avoid the inode lock")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Pull misc fixes from Guenter Roeck.

These are fixes for regressions that Guenther has been reporting, and
the maintainers haven't picked up and sent in. With rc6 fairly imminent,
I'm taking them directly from Guenter.

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  apparmor: fix policy_unpack_test on big endian systems
  Revert "MIPS: csrc-r4k: Apply verification clocksource flags"
  microblaze: don't treat zero reserved memory regions as error

Pull power sequencing fix from Bartosz Golaszewski:
 "A follow-up fix for the power sequencing subsystem. It turned out the
  previous fix for this driver was incomplete and broke the WLAN support
  on some platforms. This addresses the issue.

   - set the direction of the wlan-enable GPIO to output after
     requesting it as-is"

* tag 'pwrseq-fixes-for-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  power: sequencing: qcom-wcn: set the wlan-enable GPIO to output

Commit a9aaf1ff ("power: sequencing: request the WLAN enable GPIO
as-is") broke WLAN on boards on which the wlan-enable GPIO enabling the
wifi module isn't in output mode by default. We need to set direction to
output while retaining the value that was already set to keep the ath
module on if it's already started.

Fixes: a9aaf1ff ("power: sequencing: request the WLAN enable GPIO as-is")
Link: https://lore.kernel.org/r/20240823115500.37280-1-brgl@bgdev.plSigned-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 6.11-rc6.  Included in here are:

   - dwc3 driver fixes for reported issues

   - MAINTAINER file update, marking a driver as unsupported :(

   - cdnsp driver fixes

   - USB gadget driver fix

   - USB sysfs fix

   - other tiny fixes

   - new device ids for usb serial driver

  All of these have been in linux-next this week with no reported
  issues"

* tag 'usb-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: option: add MeiG Smart SRM825L
  usb: cdnsp: fix for Link TRB with TC
  usb: dwc3: st: add missing depopulate in probe error path
  usb: dwc3: st: fix probed platform device ref count on probe error path
  usb: dwc3: ep0: Don't reset resource alloc flag (including ep0)
  usb: core: sysfs: Unmerge @usb3_hardware_lpm_attr_group in remove_power_attributes()
  usb: typec: fsa4480: Relax CHIP_ID check
  usb: dwc3: xilinx: add missing depopulate in probe error path
  usb: dwc3: omap: add missing depopulate in probe error path
  dt-bindings: usb: microchip,usb2514: Fix reference USB device schema
  usb: gadget: uvc: queue pump work in uvcg_video_enable()
  cdc-acm: Add DISABLE_ECHO quirk for GE HealthCare UI Controller
  usb: cdnsp: fix incorrect index in cdnsp_get_hw_deq function
  usb: dwc3: core: Prevent USB core invalid event buffer address access
  MAINTAINERS: Mark UVC gadget driver as orphan

Pull SCSI fixes from James Bottomley:
 "Minor fixes only.

  The sd.c one ignores a sync cache request if format is in progress
  which can happen if formatting a drive across suspend/resume"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Ignore command SYNCHRONIZE CACHE error if format in progress
  scsi: aacraid: Fix double-free on probe failure
  scsi: lpfc: Fix overflow build issue

Pull nfsd fix from Chuck Lever:

 - One more write delegation fix

* tag 'nfsd-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: fix nfsd4_deleg_getattr_conflict in presence of third party lease

Pull xfs fixes from Chandan Babu:

 - Do not call out v1 inodes with non-zero di_nlink field as being
   corrupt

 - Change xfs_finobt_count_blocks() to count "free inode btree" blocks
   rather than "inode btree" blocks

 - Don't report the number of trimmed bytes via FITRIM because the
   underlying storage isn't required to do anything and failed discard
   IOs aren't reported to the caller anyway

 - Fix incorrect setting of rm_owner field in an rmap query

 - Report missing disk offset range in an fsmap query

 - Obtain m_growlock when extending realtime section of the filesystem

 - Reset rootdir extent size hint after extending realtime section of
   the filesystem

* tag 'xfs-6.11-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: reset rootdir extent size hint after growfsrt
  xfs: take m_growlock when running growfsrt
  xfs: Fix missing interval for missing_owner in xfs fsmap
  xfs: use XFS_BUF_DADDR_NULL for daddrs in getfsmap code
  xfs: Fix the owner setting issue for rmap query in xfs fsmap
  xfs: don't bother reporting blocks trimmed via FITRIM
  xfs: xfs_finobt_count_blocks() walks the wrong btree
  xfs: fix folio dirtying for XFILE_ALLOC callers
  xfs: fix di_onlink checking for V1/V2 inodes

Pull ARM SoC fixes from Arnd Bergmann:
 "There is a fairly large number of bug fixes for Qualcomm platforms,
  most of them addressing issues with the devicetree files for the newly
  added Snapdragon X1 based laptops to make them more reliable.

  The Qualcomm driver changes address a few build-time issues as well as
  runtime problems in the tzmem and scm firmware, the USB Type-C driver,
  and the cmd-db and pmic_glink soc drivers.

  The NXP i.MX usually gets a bunch of devicetree fixes that is
  proportional to the number of supported machines. This includes both
  warning fixes and correctness for the 64-bit i.MX9, i.MX8 and
  layerscape platforms, as well as a single fix for a 32-bit i.MX6 based
  board.

  The other changes are the usual minor changes, including an update to
  the MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs
  (risc-v)"

* tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
  firmware: microchip: fix incorrect error report of programming:timeout on success
  soc: qcom: pd-mapper: Fix singleton refcount
  firmware: qcom: tzmem: disable sdm670 platform
  soc: qcom: pmic_glink: Actually communicate when remote goes down
  usb: typec: ucsi: Move unregister out of atomic section
  soc: qcom: pmic_glink: Fix race during initialization
  firmware: qcom: qseecom: remove unused functions
  firmware: qcom: tzmem: fix virtual-to-physical address conversion
  firmware: qcom: scm: Mark get_wq_ctx() as atomic call
  arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt
  arm64: dts: qcom: disable GPU on x1e80100 by default
  arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
  arm64: dts: imx95: correct L3Cache cache-sets
  arm64: dts: imx95: correct a55 power-domains
  arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
  arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
  ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
  arm64: dts: imx93: update default value for snps,clk-csr
  arm64: dts: freescale: tqma9352: Fix watchdog reset
  arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
  ...

Pull input fix from Dmitry Torokhov:

 - a fix for Cypress PS/2 touchpad for regression introduced in 6.11
   merge window where a timeout condition is incorrectly reported for
   all extended Cypress commands

* tag 'input-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: cypress_ps2 - fix waiting for command response

Pull pci fixes from Bjorn Helgaas:

 - Add Manivannan Sadhasivam as PCI native host bridge and endpoint
   driver reviewer (Manivannan Sadhasivam)

 - Disable MHI RAM data parity error interrupt for qcom SA8775P SoC to
   work around hardware erratum that causes a constant stream of
   interrupts (Manivannan Sadhasivam)

 - Don't try to fall back to qcom Operating Performance Points (OPP)
   support unless the platform actually supports OPP (Manivannan
   Sadhasivam)

 - Add imx@lists.linux.dev mailing list to MAINTAINERS for NXP
   layerscape and imx6 PCI controller drivers (Frank Li)

* tag 'pci-v6.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  MAINTAINERS: PCI: Add NXP PCI controller mailing list imx@lists.linux.dev
  PCI: qcom: Use OPP only if the platform supports it
  PCI: qcom-ep: Disable MHI RAM data parity error interrupt for SA8775P SoC
  MAINTAINERS: Add Manivannan Sadhasivam as Reviewer for PCI native host bridge and endpoint drivers

Pull block fix from Jens Axboe:
 "Fix for a single regression for WRITE_SAME introduced in the 6.11
  merge window"

* tag 'block-6.11-20240830' of git://git.kernel.dk/linux:
  block: fix detection of unsupported WRITE SAME in blkdev_issue_write_zeroes

Pull io_uring fixes from Jens Axboe:

 - A fix for a regression that happened in 6.11 merge window, where the
   copying of iovecs for compat mode applications got broken for certain
   cases.

 - Fix for a bug introduced in 6.10, where if using recv/send bundles
   with classic provided buffers, the recv/send would fail to set the
   right iovec count. This caused 0 byte send/recv results. Found via
   code coverage testing and writing a test case to exercise it.

* tag 'io_uring-6.11-20240830' of git://git.kernel.dk/linux:
  io_uring/kbuf: return correct iovec count from classic buffer peek
  io_uring/rsrc: ensure compat iovecs are copied correctly

Merge tag 'at91-fixes-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes

Microchip AT91 fixes for v6.11

It contains:
- DTS directory update to match all entries not only those starting with
  at91 or sama

Pull lsm fix from Paul Moore:
 "One small patch to correct a NFS permissions problem with SELinux and
  Smack"

* tag 'lsm-pr-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  selinux,smack: don't bypass permissions check in inode_setsecctx hook

Pull power management fixes from Rafael Wysocki:
 "These fix three issues in the amd-pstate cpufreq driver.

  Specifics:

   - Remove checks for highest performance match on preferred cores when
     updating preferred core ranking in amd-pstate (Mario Limonciello)

   - Make amd-pstate call topology_logical_package_id() instead of
     logical_die_id() to get a socked ID for a CPU (Gautham Shenoy)

   - Fix uninitialized variable in amd_pstate_cpu_boost_update() (Dan
     Carpenter)"

* tag 'pm-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq/amd-pstate-ut: Don't check for highest perf matching on prefcore
  cpufreq/amd-pstate: Use topology_logical_package_id() instead of logical_die_id()
  cpufreq: amd-pstate: Fix uninitialized variable in amd_pstate_cpu_boost_update()

Pull dmaengine fixes from Vinod Koul:

 - A bunch of dw driver changes to fix the src/dst addr width config

 - Omap driver fix for sglen initialization

 - stm32-dma3 driver lli_size init fix

 - dw edma driver fixes for watermark interrupts and unmasking STOP and
   ABORT interrupts

* tag 'dmaengine-fix-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: dw-edma: Do not enable watermark interrupts for HDMA
  dmaengine: dw-edma: Fix unmasking STOP and ABORT interrupts for HDMA
  dmaengine: stm32-dma3: Set lli_size after allocation
  dmaengine: ti: omap-dma: Initialize sglen after allocation
  dmaengine: dw: Unify ret-val local variables naming
  dmaengine: dw: Simplify max-burst calculation procedure
  dmaengine: dw: Define encode_maxburst() above prepare_ctllo() callbacks
  dmaengine: dw: Simplify prepare CTL_LO methods
  dmaengine: dw: Add memory bus width verification
  dmaengine: dw: Add peripheral bus width verification

Pull phy fixes from Vinod Koul:

 - Qualcomm QMP X1E80100 PCIe Gen4 PHY initialisation fix

 - Freescale imx8mq tuning parameter name fix

 - Samsung exynos5 fir for error code in probe()

 - Xilinx Zynqmp SGMII linkup failure fix

* tag 'phy-fixes-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: xilinx: phy-zynqmp: Fix SGMII linkup failure on resume
  phy: exynos5-usbdrd: fix error code in probe()
  phy: fsl-imx8mq-usb: fix tuning parameter name
  phy: qcom: qmp-pcie: Fix X1E80100 PCIe Gen4 PHY initialisation

Pull soundwire fix from Vinod Koul:

 - Single fix for non-continous port map programming

* tag 'soundwire-6.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: stream: fix programming slave ports for non-continous port maps

Pull iommu fixes from Joerg Roedel:

 - Fix a device-stall problem in bad io-page-fault setups (faults
   received from devices with no supporting domain attached).

 - Context flush fix for Intel VT-d.

 - Do not allow non-read+non-write mapping through iommufd as most
   implementations can not handle that.

 - Fix a possible infinite-loop issue in map_pages() path.

 - Add Jean-Philippe as reviewer for SMMUv3 SVA support

* tag 'iommu-fixes-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
  MAINTAINERS: Add Jean-Philippe as SMMUv3 SVA reviewer
  iommu: Do not return 0 from map_pages if it doesn't do anything
  iommufd: Do not allow creating areas without READ or WRITE
  iommu/vt-d: Fix incorrect domain ID in context flush helper
  iommu: Handle iommu faults for a bad iopf setup

Add imx mailing list imx@lists.linux.dev for PCI controller of NXP chips
(Layerscape and iMX).

Link: https://lore.kernel.org/r/20240826202740.970015-1-Frank.Li@nxp.comSigned-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>

io_provided_buffers_select() returns 0 to indicate success, but it should
be returning 1 to indicate that 1 vec was mapped. This causes peeking
to fail with classic provided buffers, and while that's not a use case
that anyone should use, it should still work correctly.

The end result is that no buffer will be selected, and hence a completion
with '0' as the result will be posted, without a buffer attached.

Fixes: 35c8711c ("io_uring/kbuf: add helpers for getting/peeking multiple buffers")
Signed-off-by: Jens Axboe <axboe@kernel.dk>