This fixes a very special case that can be reproduced by just
disconnecting a disk at runtime, and without unmounting the
filesystem first, start scrub on the filesystem with the
disconnected disk. All read and write EIOs are handled
correctly, only the first superblock is an exception and gives
a BUG() in a subfunction. The BUG() is correct, it would crash
later otherwise. The subfunction must not be called for
superblocks and this is what the fix changes.
Reported-by: Joeri Vanthienen <mail@joerivanthienen.be>
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

This starts a transaction and dirties the inode everytime we call it, which
is super expensive if you have a write heavy workload.  We will be updating
the inode when the IO completes and we reserve the space for the inode
update when we reserve space for the write, so there is no chance of loss of
information or enospc issues.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

I noticed while doing fsync tests that we were always dropping the path and
re-searching when we first cow the log root even though we've already gotten
the write lock on the root.  That's because we don't take into account that
there might not be a parent node, so fix the check to make sure there is
actually a parent node before we undo all of this work for nothing.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

If we are syncing over and over the overhead of doing all those maps in
fill_inode_item and log_changed_extents really starts to hurt, so use map
tokens so we can avoid all the extra mapping.  Since the token maps from our
offset to the end of the page make sure to set the first thing in the item
first so we really only do one map.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

This gets called at least 4 times for every level while adding an object,
and it involves 3 kmapping calls, which on my box take about 5us a piece.
So instead use a token, which brings us down to 1 kmap call and makes this
function take 1/3 of the time per call.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

Our token logic depends on token->kaddr being set, and if it is not it sets
everything properly as needed.  So instead of memsetting just set
token->kaddr to NULL.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

No reason to set the path blocking or loop through all of the pages if the
extent buffer isn't actually marked dirty.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

This is a high traffic function, let's try and do as little as possible
during normal operations shall we?
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

We don't really need to copy extents from the source tree since we have all
of the information already available to us in the extent_map tree.  So
instead just write the extents straight to the log tree and don't bother to
copy the extent items from the source tree.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

You'd think path->keep_locks would keep all the locks wouldn't you?  You'd
be wrong.  It only keeps them if the slot is pointing to the last item in
the node.  This is for use with btrfs_next_leaf, which needs this sort of
thing.  But the horrible horrible things I'm going to do to the tree log
means I really need everything held from root to leaf so I can add and
delete items in the same search.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

We are going to use EM's to log extents in the future, so we need to not
mark them as prealloc if they aren't actually prealloc extents.  Instead
mark them with FILLING so we know to ammend mod_start/mod_len and that way
we don't confuse the extent logging code.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

If we've written to a prealloc extent we need to know the original block len
for the extent.  We can't figure this out currently since ->block_len is
just set to the extent length.  So introduce ->orig_block_len so that we
know how many bytes were in the original extent for proper extent logging
that future patches will need.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

The tree logging stuff needs the csums to be on the ordered extents in order
to log them properly, so mark that we're sync and inline the csum creation
so we don't have to wait on the csumming to be done when logging extents
that are still in flight.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

We don't copy inode items anwyay, we just copy them straight into the log
from the in memory inode.  So if we know we're only logging the inode, don't
bother dropping anything, just try to insert it and either if it succeeds or
we get EEXIST we can update the inode item in the log and carry on.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

Currently we copy all the file information into the log, inode item, the
refs, xattrs etc.  Except most of this doesn't change from fsync to fsync,
just the inode item changes.  So set a flag if an xattr changes or a link is
added, and otherwise only log the inode item.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

Originally root_times_lock was introduced as part of send/receive
code however newly developed patch to label the subvol reused
the same lock, so renaming it for a meaningful name.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

Currently udev does not know about the device being removed from the
file system. This may result in the situation where we're unable to
mount the file system by UUID or by LABEL because the by-uuid and
by-label links may still point to the device which is no longer part of
the btrfs file system and hence does not have any btrfs super block.

It can be easily reproduced by the following:

mkfs.btrfs -L bugfs /dev/loop[0-6]
mount /dev/loop0 /mnt/test
btrfs device delete /dev/loop0 /mnt/test
umount /mnt/test

mount LABEL=bugfs /mnt/test <---- this fails

then see:

ls -l /dev/disk/by-label/bugfs

which will still point to the /dev/loop0

We did not noticed this before because libblkid would send the udev
event for us when it notice that the link does not fit the reality,
however it does not do that anymore and completely relies on udev
information.

Fix this by sending the KOBJ_CHANGE event to the bdev kobject after
successful device removal.

Note that this does not affect device addition, because we will open the
device prior the addition from userspace and udev will notice that and
reread the device afterwards.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

ret variant may be set to 0 if we read page successfully, but it might be
released before we lock it again. On this case, if we fail to allocate a
new page, we will return 0, it is wrong, fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

Since we can pre-allocate the space past EOF, we should be able to reclaim
that space if we need. This patch implements it by removing the EOF check.

Though the manual of fallocate command says we can use truncate command to
reclaim the pre-allocated space which past EOF, but because truncate command
changes the file size, we must run several commands to reclaim the space if we
don't want to change the file size, so it is not a good choice.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

Steps to reproduce:
 # mkfs.btrfs <disk>
 # mount <disk> <mnt>
 # dd if=/dev/zero of=<mnt>/<file> bs=512 seek=5 count=8
 # fallocate -p -o 2048 -l 16384 <mnt>/<file>
 # dd if=/dev/zero of=<mnt>/<file> bs=4096 seek=3 count=8 conv=notrunc,nocreat
 # umount <mnt>
 # dmesg
 WARNING: at fs/btrfs/inode.c:7140 btrfs_destroy_inode+0x2eb/0x330

The reason is that we inputed a range which is beyond the end of the file. And
because the end of this range was not page-aligned, we had to truncate the last
page in this range, this operation is similar to a buffered file write. In other
words, we reserved enough space and clear the data which was in the hole range
on that page. But when we expanded that test file, write the data into the same
page, we forgot that we have reserved enough space for the buffered write of
that page because in most cases there is no page that is beyond the end of
the file. As a result, we reserved the space twice.

In fact, we needn't truncate the page if it is beyond the end of the file, just
release the allocated space in that range. Fix the above problem by this way.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

(start + len) is the start of the adjacent extent, not the end of the current
extent, so we should not use it to check the hole is on the same page or not.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

We forget to release the reserved space in the error path of delalloc
reservatiom, fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

If we runt the direct IO, we should not run auto defrag, because it may
introduce buffered IO vs direcIO problem, and make direct IO slow down.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

Value 0 is not a tree id, so besides an upper limit, a lower limit is
necessary as well while parsing root types of tracepoint.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

We should use ctl->unit for free space calculation instead of block_group->sectorsize
even though for free space use_bitmap or free space cluster we only have sectorsize assigned to ctl->unit currently. Also, we can keep it consisten in code style.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

Refactor it by checking whether the inode has been created and needs to be
dropped (drop_inode_on_err) and also if the err variable is set. That way the
variable doesn't need to be set on each and every error handling block.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

When a new file is created with btrfs_create(), the inode will initially be
created with permissions 0666 and later on in btrfs_init_acl() it will be
adapted to mask out the umask bits. The problem is that this change won't make
it into the btrfs_inode unless there's another change to the inode (e.g. writing
content changing the size or touching the file changing the mtime.)

This fix adds a call to btrfs_update_inode() to btrfs_create() to make sure that
the change will not get lost if the in-memory inode is flushed before other
changes are made to the file.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

When the flag not supported is specified, it is necessary to return the error
to the caller.
So, we add the validity check of the fiemap's flag.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

Passing a null extended attribute value means to remove the attribute,
but we don't have to add a new NULL extended attribute.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

If the acl can be exactly represented in the traditional file
mode permission bits, we don't set another acl attribute.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

alloc_end is not the real end of the current extent, it is the start of the
next adjoining extent. So we needn't +1 when calculating the size the space
that is about to be reserved.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

The kernel developers have implemented some often-used align macros, we should
use them instead of the complex code.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

This regression was introduced by the device-replace patches.
Scrub immediately stops checking those disks that have write errors.
This is nothing that happens in the real world, but it is wrong
since scrub is the tool to detect and repair defects. Fix it.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

This issue was detected by the "0-DAY kernel build testing".

fs/btrfs/volumes.c: In function 'btrfs_rm_device':
fs/btrfs/volumes.c:1505:1: warning: label 'error_close' defined but not used [-Wunused-label]
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

The structure member mirror_num is modified concurrently to the
structure member is_iodone. This doesn't require any locking by
design, unless everything is stored in the same 32 bits of a
bit field. This was the case and xfstest 284 was able to
trigger false warnings from the checker code. This patch
seperates the bits and fixes the race.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

If we freeze the fs, the auto defragment should not run. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

This patch restructure btrfs_run_defrag_inodes() and make the code of the auto
defragment more readable.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

We forget to get the defrag lock when we re-add the defragable inode,
Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

The auto defrag allocation is in the fast path of the IO, so use slabs
to improve the speed of the allocation.

And besides that, it can do check for leaked objects when the module is removed.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

We need get write access for qgroup operations, or we will modify the R/O fs.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>