- 11 Apr, 2006 40 commits
-
-
NeilBrown authored
We should be shutting down rpciod for the callback channel when we shut down the server. Also note that we do rpciod_up() and create the callback client *before* setting cb_set--the cb_set only determines whether the initial null was succesful. So cb_set is not a reliable determiner of whether we need to clean up, only cb_client is. Signed-off-by:
J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
NeilBrown authored
Some obvious cleanup. Signed-off-by:
-
NeilBrown authored
We need to make sure the laundromat work doesn't reschedule itself just when we try to cancel it. Also, we shouldn't be waiting for it to finish running while holding the state lock, as that's a potential deadlock. Signed-off-by:
-
J. Bruce Fields authored
Every caller of svc_take_page ignores its return value and assumes it succeeded. So just WARN() instead of returning an ignored error. This would have saved some time debugging a recent nfsd4 problem. If there are still failure cases here, then the result is probably that we overwrite an earlier part of the reply while xdr-encoding. While the corrupted reply is a nasty bug, it would be worse to panic here and create the possibility of a remote DOS; hence WARN() instead of BUG(). Signed-off-by:
-
NeilBrown authored
We're using svc_take_page here to get another page for the tail in case one wasn't already allocated. But there isn't always guaranteed to be another page available. Also fix a typo that made us check the tail buffer for space when we meant to be checking the head buffer. Signed-off-by:
-
NeilBrown authored
Fix corruption on readdir encoding with 64k pages. Signed-off-by:
-
NeilBrown authored
In v4 we grab an extra page just for the padding of returned data. The formula that the rpc server uses to allocate pages for the response doesn't take into account this extra page. Instead of adjusting those formulae, we adopt the same solution as v2 and v3, and put the "tail" data in the same page as the "head" data. Signed-off-by:
-
NeilBrown authored
Since nfsd_setuser() is already called from any operation that uses the current filehandle (because it's called from fh_verify), there's no reason to call it from putrootfh. Signed-off-by:
Andy Adamson <andros@citi.umich.edu> Signed-off-by:
-
NeilBrown authored
In addition to setting the processes filesystem id's, nfsd_setuser also modifies the value of the rq_cred which stores the id's that originally came from the rpc call, for example to reflect root squashing. There's no real reason to do that--the only case where rqstp->rq_cred is actually used later on is in the NFSv4 SETCLIENTID/SETCLIENTID_CONFIRM operations, and there the results are the opposite of what we want--those two operations don't deal with the filesystem at all, they only record the credentials used with the rpc call for later reference (so that we may require the same credentials be used on later operations), and the credentials shouldn't vary just because there was or wasn't a previous operation in the compound that referred to some export This fixes a bug which caused mounts from Solaris clients to fail. Signed-off-by:
-
NeilBrown authored
Export a directory that does not exist: exportfs -orw,fsid=0,insecure,no_subtree_check client:/home/NFS4 Try to mount from client with nfs4. Mount hangs (I'm not sure why - that's another issue). While client is hung, back on server mkdir /home/NFS4 The server panics in dput. I traced the problem back to svc_export_parse() calling path_release() even though path_lookup() failed (it happens to fill in the nameidata structure with a negative dentry - so the test after out: succeeds). After patching, an recreating the problem, the client mount still takes some time before finally exiting with a message "couldn't read superblock". Here is a simple patch to resolve this issue: Signed-off-by:
Frank Filz <ffilzlnx@us.ibm.com> Signed-off-by:
-
NeilBrown authored
We should be using the length from the second vfs_getxattr, in case it changed. (Note: there's still a small race here; we could end up returning -ENOMEM if the length increased between the first and second call. I don't know whether it's worth spending a lot of effort to fix that.) This makes XFS ACLs usable on NFS exports, which they currently aren't, since XFS appears to be returning a too-large value for vfs_getxattr() when it's passed a NULL buffer. So there's probably an XFS bug here too, though since getxattr with a NULL buffer is usually used to decide how much memory to allocate, it may be a fairly harmless bug in most cases. Signed-off-by:
-
NeilBrown authored
We're returning -1 in a few places in the NFSv4<->POSIX acl translation code where we could return a reasonable error. Also allows some minor simplification elsewhere. Signed-off-by:
-
NeilBrown authored
this fixes coverity id #3. Coverity detected dead code, since the == -1 comparison only returns 0 or 1 to error. Therefore the if ( error < 0 ) statement was always false. Seems that this was an if( error = nfs4... ) statement some time ago, which got broken during cleanup. Signed-off-by:
Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by:
-
Adrian Bunk authored
Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: Marc Eshel <eshel@almaden.ibm.com> Cc: Andy Adamson <andros@citi.umich.edu> Cc: J. Bruce Fields <bfields@citi.umich.edu> Cc: Neil Brown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
Use the fl_lmops field to identify which locks are ours, instead of trying to look them up in our private hash. This is safer and more efficient. Earlier versions of this patch used a lock flag instead, but Trond pointed out that adding a new flag for each lock manager wasn't going to scale well, and suggested this approach instead; a separate patch converts lockd to using fl_lmops in the same way. In the NFSv4 case this looks like a bit of a hack, since the NFSv4 server isn't currently actually defining a lock_manager_operations struct, so we end up defining one *just* to serve as a cookie to identify our locks. But it works, and we actually do expect to start using the lock_manager_operations at some point anyway. Signed-off-by:
Marc Eshel <eshel@almaden.ibm.com> Signed-off-by:
-
NeilBrown authored
NFSd makes sure there is enough space to hold the maximum possible reply before accepting a request. The units for this maximum is (4byte) words. However in three places, particularly for read request, the number given is a number of bytes. This means too much space is reserved which is slightly wasteful. This is the sort of patch that could uncover a deeper bug, and it is not critical, so it would be best for it to spend a while in -mm before going in to mainline. (akpm: target 2.6.17-rc2, 2.6.16.3 (approx)) Discovered-by:
"Eivind Sarto" <ivan@kasenna.com> Signed-off-by:
-
Adrian Bunk authored
CRC_CCITT is an internal helper function that should be select'ed. Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Signed-off-by:
-
Adrian Bunk authored
Fix a memory leak spotted by the Coverity checker if (!try_module_get(owner)). Signed-off-by:
-
Adrian Bunk authored
- make the needlessly global gigaset_get_cs_by_tty() static - remove the unused EXPORT_SYMBOL_GPL(gigaset_debugdrivers) Signed-off-by:
-
Tilman Schmidt authored
With Hansjoerg Lipp <hjlipp@web.de> Replace some atomic_t variables in the Gigaset drivers by non-atomic ones, using spinlocks instead to assure atomicity, as proposed in discussions on the linux-kernel mailing list. Signed-off-by:
Hansjoerg Lipp <hjlipp@web.de> Signed-off-by:
-
Tilman Schmidt authored
With Hansjoerg Lipp <hjlipp@web.de> Add a README file for the Siemens Gigaset drivers to the Documentation/isdn directory. Signed-off-by:
-
Tilman Schmidt authored
With Hansjoerg Lipp <hjlipp@web.de> Remove four unnecessary forward function declarations and an obsolete E-mail address from the Siemens Gigaset drivers. Signed-off-by:
-
Tilman Schmidt authored
With Hansjoerg Lipp <hjlipp@web.de> Remove the private version of __skb_put() from the Siemens Gigaset drivers. Signed-off-by:
-
Tilman Schmidt authored
With Hansjoerg Lipp <hjlipp@web.de> Convert the semaphores used by the Gigaset drivers to mutexes. Signed-off-by:
-
Tilman Schmidt authored
With Hansjoerg Lipp <hjlipp@web.de> Eliminate the from_user argument from a debugging function, thus easing the job of sparse. Signed-off-by:
-
Tilman Schmidt authored
With Hansjoerg Lipp <hjlipp@web.de> Uninline a function which was slightly too big to warrant inlining. Signed-off-by:
-
Tilman Schmidt authored
With Hansjoerg Lipp <hjlipp@web.de> Remove the IFNULL debugging macros from the Gigaset drivers. Signed-off-by:
-
Tilman Schmidt authored
With Hansjoerg Lipp <hjlipp@web.de> Correct the way the Gigaset drivers create their sysfs entries. Signed-off-by:
-
Tilman Schmidt authored
With Hansjoerg Lipp <hjlipp@web.de> Improve error reporting of the Gigaset drivers, by using the dev_err/dev_warn/dev_info macros from device.h instead of err/warn/info from usb.h whereever possible. Also rename the private dbg macro to gig_dbg in order to avoid confusion with the macro of the same name in usb.h. Signed-off-by:
-
Tilman Schmidt authored
With Hansjoerg Lipp <hjlipp@web.de> Correct timer usage in the Gigaset drivers to take advantage of the existing setup_timer() function, and use milliseconds as unit. Signed-off-by:
-
Tilman Schmidt authored
With Hansjoerg Lipp <hjlipp@web.de> Remove the restriction to build the Gigaset drivers as modules only. Signed-off-by:
-
Tilman Schmidt authored
With Hansjoerg Lipp <hjlipp@web.de> Source code formatting cleanups for the Siemens Gigaset drivers, such as line length, comments, removal of unused declarations, and typo corrections. It does not introduce any functional changes. Signed-off-by:
-
Miklos Szeredi authored
The previous patch removed limiting the number of outstanding requests. This patch adds a much simpler limiting, that is also compatible with file locking operations. A task may have at most one synchronous request allocated. So these requests need not be otherwise limited. However the number of background requests (release, forget, asynchronous reads, interrupted requests) can grow indefinitely. This can be used by a malicous user to cause FUSE to allocate arbitrary amounts of unswappable kernel memory, denying service. For this reason add a limit for the number of background requests, and block allocations of new requests until the number goes bellow the limit. Also use this mechanism to block all requests until the INIT reply is received. Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Signed-off-by:
-
Miklos Szeredi authored
FUSE allocated most requests from a fixed size pool filled at mount time. However in some cases (release/forget) non-pool requests were used. File locking operations aren't well served by the request pool, since they may block indefinetly thus exhausting the pool. This patch removes the request pool and always allocates requests on demand. Signed-off-by:
-
Miklos Szeredi authored
Return consistent error values for the case when the opened device file has no mount associated yet. Signed-off-by:
-
Miklos Szeredi authored
Remove the global spinlock in favor of a per-mount one. This patch is basically find & replace. The difficult part has already been done by the previous patch. Signed-off-by:
-
Miklos Szeredi authored
This is in preparation for removing the global spinlock in favor of a per-mount one. The only critical part is the interaction between fuse_dev_release() and fuse_fill_super(): fuse_dev_release() must see the assignment to file->private_data, otherwise it will leak the reference to fuse_conn. This is ensured by the fput() operation, which will synchronize the assignment with other CPU's that may do a final fput() soon after this. Also redundant locking is removed from fuse_fill_super(), where exclusion is already ensured by the BKL held for this function by the VFS. Signed-off-by:
-
Jeff Dike authored
I don't like duplicating the connected and list_empty tests in fuse_dev_readv, but this seemed cleaner than adding the f_flags test to request_wait. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Jeff Dike authored
This adds asynchronous notification to FUSE - a FUSE server can request O_ASYNC on a /dev/fuse file descriptor and receive SIGIO when there is input available. One subtlety - fuse_dev_fasync, which is called when O_ASYNC is requested, does no locking, unlink the other methods. I think it's unnecessary, as the fuse_conn.fasync list is manipulated only by fasync_helper and kill_fasync, which provide their own locking. It would also be wrong to use the fuse_lock, as it's a spin lock and fasync_helper can sleep. My one concern with this is the fuse_conn going away underneath fuse_dev_fasync - sys_fcntl takes a reference on the file struct, so this seems not to be a problem. Signed-off-by:
-
Miklos Szeredi authored
fuse_dev_poll() returned an error value instead of a poll mask. Luckily (or unluckily) -ENODEV does contain the POLLERR bit. There's also a race if filesystem is unmounted between fuse_get_conn() and spin_lock(), in which case this event will be missed by poll(). Signed-off-by:
-
