TCP receive window handling is multi staged.

A socket has a memory budget, static or dynamic, in sk_rcvbuf.

Because we do not really know how this memory budget translates to
a TCP window (payload), TCP announces a small initial window
(about 20 MSS).

When a packet is received, we increase TCP rcv_win depending
on the payload/truesize ratio of this packet. Good citizen
packets give a hint that it's reasonable to have rcv_win = sk_rcvbuf/2

This heuristic takes place in tcp_grow_window()

Problem is : We currently call tcp_grow_window() only for in-order
packets.

This means that reorders or packet losses stop proper grow of
rcv_win, and senders are unable to benefit from fast recovery,
or proper reordering level detection.

Really, a packet being stored in OFO queue is not a bad citizen.
It should be part of the game as in-order packets.

In our traces, we very often see sender is limited by linux small
receive windows, even if linux hosts use autotuning (DRS) and should
allow rcv_win to grow to ~3MB.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Provide a kernel-doc comment documentation for the BQL helpers:
- netdev_sent_queue
- netdev_completed_queue
- netdev_reset_queue

Similarly to how it is done for the other functions, the documentation
only covers the function operating on struct net_device and not struct
netdev_queue.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch proposes to remove the MLX5_DEBUG kernel configuration
parameter defined in drivers/net/ethernet/mellanox/mlx5/core/Kconfig,
but used nowhere in the makefiles and source code.

This could also be fixed by using this parameter,
but this may be a leftover from driver development...
Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit c0a77ec7 'bnx2x: Add missing braces in
bnx2x:bnx2x_link_initialize' identified indentation problem, but resolved it
by adding braces instead of fixing the indentation. The braces now prevents a
config_init call in some cases, though it should be called regardless of that
condition. This patch removes the braces and fix the confusing indentation
that caused this mess.
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
CC: Dave Jones <davej@redhat.com>
Tested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 60cad4e6
"bnx2x: VF RSS support - VF side" fails to compile w/o
CONFIG_BNX2X_SRIOV option.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit 0f7cc9a3 "tcp: increase throughput when reordering is high",
it only allows cwnd to increase in Open state. This mistakenly disables
slow start after timeout (CA_Loss). Moreover cwnd won't grow if the
state moves from Disorder to Open later in tcp_fastretrans_alert().

Therefore the correct logic should be to allow cwnd to grow as long
as the data is received in order in Open, Loss, or even Disorder state.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix finer-grained control and let only a whitelist of allowed netlink
protocols pass, in our case related to networking. If later on, other
subsystems decide they want to add their protocol as well to the list
of allowed protocols they shall simply add it. While at it, we also
need to tell what protocol is in use otherwise BPF_S_ANC_PROTOCOL can
not pick it up (as it's not filled out).
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull ARM updates from Russell King:
 "This set includes adding support for Neon acceleration of RAID6 XOR
  code from Ard Biesheuvel, cache flushing and barrier updates from Will
  Deacon, and a cleanup to the ARM debug code which reduces the amount
  of code by about 500 lines.

  A few other cleanups, such as constifying the machine descriptors
  which already shouldn't be written to, cleaning up the printing of the
  L2 cache size"

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (55 commits)
  ARM: 7826/1: debug: support debug ll on hisilicon soc
  ARM: 7830/1: delay: don't bother reporting bogomips in /proc/cpuinfo
  ARM: 7829/1: Add ".text.unlikely" and ".text.hot" to arm unwind tables
  ARM: 7828/1: ARMv7-M: implement restart routine common to all v7-M machines
  ARM: 7827/1: highbank: fix debug uart virtual address for LPAE
  ARM: 7823/1: errata: workaround Cortex-A15 erratum 773022
  ARM: 7806/1: allow DEBUG_UNCOMPRESS for Tegra
  ARM: 7793/1: debug: use generic option for ep93xx PL10x debug port
  ARM: debug: move SPEAr debug to generic PL01x code
  ARM: debug: move davinci debug to generic 8250 code
  ARM: debug: move keystone debug to generic 8250 code
  ARM: debug: remove DEBUG_ROCKCHIP_UART
  ARM: debug: provide generic option choices for 8250 and PL01x ports
  ARM: debug: move PL01X debug include into arch/arm/include/debug/
  ARM: debug: provide PL01x debug uart phys/virt address configuration options
  ARM: debug: add support for word accesses to debug/8250.S
  ARM: debug: move 8250 debug include into arch/arm/include/debug/
  ARM: debug: provide 8250 debug uart phys/virt address configuration options
  ARM: debug: provide 8250 debug uart register shift configuration option
  ARM: debug: provide 8250 debug uart flow control configuration option
  ...

Merge commit 06c54055 did a bad conflict resolution accidentally
leaving out a closing brace.  Add it back.

This breaks a handful of defconfigs on ARM, so it'd be good to see it
applied pretty quickly.
Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull IDE changes from David Miller:
 "Mostly cleanups, and changes part of tree-wide adjustments, this code
  is in deep freeze so that's pretty much what we expect these days"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  ide: sgiioc4: Staticize ioc4_ide_attach_one()
  ide: palm_bk3710: add missing __iomem annotation
  ide: use dev_get_platdata()
  ide-disk_proc: use macro to replace magic number
  ide: replace strict_strtol() with kstrtol()

Pull sparc changes from David Miller:
 "Several bug fixes (from Kirill Tkhai, Geery Uytterhoeven, and Alexey
  Dobriyan) and some support for Fujitsu sparc64x chips (from Allen
  Pais)"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Export flush_ptrace_access() (needed by lustre)
  sparc: fix PCI device proc file mmap(2)
  sparc64: Remove RWSEM export leftovers
  sparc64: Fix off by one in trampoline TLB mapping installation loop.
  sparc64: Fix ITLB handler of null page
  esp_scsi: Fix tag state corruption when autosensing.
  sparc64: Fix not SRA'ed %o5 in 32-bit traced syscall
  sparc64: cleanup: Rename ret_from_syscall to ret_from_fork
  sparc32: Fix exit flag passed from traced sys_sigreturn
  sparc64: Fix wrong syscall return value passed to trace_sys_exit()
  support sparc64x chip type in cpumap.c
  cpu hw caps support for sparc64x

Pull networking changes from David Miller:
 "Noteworthy changes this time around:

   1) Multicast rejoin support for team driver, from Jiri Pirko.

   2) Centralize and simplify TCP RTT measurement handling in order to
      reduce the impact of bad RTO seeding from SYN/ACKs.  Also, when
      both timestamps and local RTT measurements are available prefer
      the later because there are broken middleware devices which
      scramble the timestamp.

      From Yuchung Cheng.

   3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel
      memory consumed to queue up unsend user data.  From Eric Dumazet.

   4) Add a "physical port ID" abstraction for network devices, from
      Jiri Pirko.

   5) Add a "suppress" operation to influence fib_rules lookups, from
      Stefan Tomanek.

   6) Add a networking development FAQ, from Paul Gortmaker.

   7) Extend the information provided by tcp_probe and add ipv6 support,
      from Daniel Borkmann.

   8) Use RCU locking more extensively in openvswitch data paths, from
      Pravin B Shelar.

   9) Add SCTP support to openvswitch, from Joe Stringer.

  10) Add EF10 chip support to SFC driver, from Ben Hutchings.

  11) Add new SYNPROXY netfilter target, from Patrick McHardy.

  12) Compute a rate approximation for sending in TCP sockets, and use
      this to more intelligently coalesce TSO frames.  Furthermore, add
      a new packet scheduler which takes advantage of this estimate when
      available.  From Eric Dumazet.

  13) Allow AF_PACKET fanouts with random selection, from Daniel
      Borkmann.

  14) Add ipv6 support to vxlan driver, from Cong Wang"

Resolved conflicts as per discussion.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits)
  openvswitch: Fix alignment of struct sw_flow_key.
  netfilter: Fix build errors with xt_socket.c
  tcp: Add missing braces to do_tcp_setsockopt
  caif: Add missing braces to multiline if in cfctrl_linkup_request
  bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize
  vxlan: Fix kernel panic on device delete.
  net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls
  net: mvneta: properly disable HW PHY polling and ensure adjust_link() works
  icplus: Use netif_running to determine device state
  ethernet/arc/arc_emac: Fix huge delays in large file copies
  tuntap: orphan frags before trying to set tx timestamp
  tuntap: purge socket error queue on detach
  qlcnic: use standard NAPI weights
  ipv6:introduce function to find route for redirect
  bnx2x: VF RSS support - VF side
  bnx2x: VF RSS support - PF side
  vxlan: Notify drivers for listening UDP port changes
  net: usbnet: update addr_assign_type if appropriate
  driver/net: enic: update enic maintainers and driver
  driver/net: enic: Exposing symbols for Cisco's low latency driver
  ...

sw_flow_key alignment was declared as " __aligned(__alignof__(long))".
However, this breaks on the m68k architecture where long is 32 bit in
size but 16 bit aligned by default. This aligns to the size of a long to
ensure that we can always do comparsions in full long-sized chunks. It
also adds an additional build check to catch any reduction in alignment.

CC: Andy Zhou <azhou@nicira.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull cputime fix from Ingo Molnar:
 "This fixes a longer-standing cputime accounting bug that Stanislaw
  Gruszka finally managed to track down"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/cputime: Do not scale when utime == 0

Pull x86 fixes from Ingo Molnar:
 "Fix for the annoying paravirt.o build warning under allmodconfig, and
  a MAINTAINERS file update"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, doc: Add an entry in MAINTAINERS for arch/x86/kernel/cpu/vmware.c
  x86, paravirt: Remove duplicate definition for DEF_NATIVE

ioc4_ide_attach_one() is used only in this file.
Fix the following sparse warnings:

drivers/ide/sgiioc4.c:603:5: warning: symbol 'ioc4_ide_attach_one' was not declared. Should it be static?
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Added missing __iomem annotation in order to fix the following
sparse warnings:

drivers/ide/palm_bk3710.c:194:31: warning: incorrect type in initializer (different address spaces)
drivers/ide/palm_bk3710.c:194:31:    expected void [noderef] <asn:2>*base
drivers/ide/palm_bk3710.c:194:31:    got void *<noident>
drivers/ide/palm_bk3710.c:212:31: warning: incorrect type in initializer (different address spaces)
drivers/ide/palm_bk3710.c:212:31:    expected void [noderef] <asn:2>*base
drivers/ide/palm_bk3710.c:212:31:    got void *<noident>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Xinghai Yu <yuxinghai@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The usage of strict_strtol() is not preferred, because
strict_strtol() is obsolete. Thus, kstrtol() should be
used.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ERROR: "flush_ptrace_access" [drivers/staging/lustre/lustre/libcfs/libcfs.ko]
undefined!
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 786d7e16 "Fix rmmod/read/write races in /proc entries"
must have broken mmapping of PCI device proc files on Sparc.

Notice how it adds wrapper around ->mmap but doesn't do it around ->get_unmapped_area.
Add wrapper around ->get_unmapped_area.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The functions

			__down_read
			__down_read_trylock
			__down_write
			__down_write_trylock
			__up_read
			__up_write
			__downgrade_write

are implemented inline, so remove corresponding EXPORT_SYMBOLs
(They lead to compile errors on RT kernel).
Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
CC: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Conflicts:
	drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
	net/bridge/br_multicast.c
	net/ipv6/sit.c

The conflicts were minor:

1) sit.c changes overlap with change to ip_tunnel_xmit() signature.

2) br_multicast.c had an overlap between computing max_delay using
   msecs_to_jiffies and turning MLDV2_MRC() into an inline function
   with a name using lowercase instead of uppercase letters.

3) stmmac had two overlapping changes, one which conditionally allocated
   and hooked up a dma_cfg based upon the presence of the pbl OF property,
   and another one handling store-and-forward DMA made.  The latter of
   which should not go into the new of_find_property() basic block.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull media updates from Mauro Carvalho Chehab:
 "This series contains:
   - Exynos s5p-mfc driver got support for VP8 encoder
   - Some SoC drivers gained support for asynchronous registration
     (needed for DT)
   - The RC subsystem gained support for RC activity LED;
   - New drivers added: a video decoder(adv7842), a video encoder
     (adv7511), a new GSPCA driver (stk1135) and support for Renesas
     R-Car (vsp1)
   - the first SDR kernel driver: mirics msi3101.  Due to some troubles
     with the driver, and because the API is still under discussion, it
     will be merged at staging for 3.12.  Need to rework on it
   - usual new boards additions, fixes, cleanups and driver
     improvements"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (242 commits)
  [media] cx88: Fix regression: CX88_AUDIO_WM8775 can't be 0
  [media] exynos4-is: Fix entity unregistration on error path
  [media] exynos-gsc: Register v4l2 device
  [media] exynos4-is: Fix fimc-lite bayer formats
  [media] em28xx: fix assignment of the eeprom data
  [media] hdpvr: fix iteration over uninitialized lists in hdpvr_probe()
  [media] usbtv: Throw corrupted frames away
  [media] usbtv: Fix deinterlacing
  [media] v4l2: added missing mutex.h include to v4l2-ctrls.h
  [media] DocBook: upgrade media_api DocBook version to 4.2
  [media] ml86v7667: fix compile warning: 'ret' set but not used
  [media] s5p-g2d: Fix registration failure
  [media] media: coda: Fix DT driver data pointer for i.MX27
  [media] s5p-mfc: Fix input/output format reporting
  [media] v4l: vsp1: Fix mutex double lock at streamon time
  [media] v4l: vsp1: Add support for RT clock
  [media] v4l: vsp1: Initialize media device bus_info field
  [media] davinci: vpif_capture: fix error return code in vpif_probe()
  [media] davinci: vpif_display: fix error return code in vpif_probe()
  [media] MAINTAINERS: add entries for adv7511 and adv7842
  ...

As reported by Randy Dunlap:

====================
when CONFIG_IPV6=m
and CONFIG_NETFILTER_XT_MATCH_SOCKET=y:

net/built-in.o: In function `socket_mt6_v1_v2':
xt_socket.c:(.text+0x51b55): undefined reference to `udp6_lib_lookup'
net/built-in.o: In function `socket_mt_init':
xt_socket.c:(.init.text+0x1ef8): undefined reference to `nf_defrag_ipv6_enable'
====================

Like several other modules under net/netfilter/ we have to
have a dependency "IPV6 disabled or set compatibly with this
module" clause.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The indentation here implies this was meant to be a multi-line if.

Introduced several years back in commit c85c2951
("caif: Handle dev_queue_xmit errors.")
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The indentation here implies that the intent was for this to be a multiline if.
Introduced a few years ago in commit ec146a6f ("bnx2x: Modify XGXS functions")
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

On vxlan device create if socket create fails vxlan device is not
added to hash table. Therefore we need to check if device
is in hashtable before we delete it from hlist.
Following patch avoid the crash. net-next already has this fix.

---8<---
BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: [<ffffffffa05f9ca7>] vxlan_dellink+0x77/0xf0 [vxlan]
PGD 42b2d9067 PUD 42e04c067 PMD 0
Oops: 0002 [#1] SMP
Modules linked in: vxlan(-)
Hardware name: Dell Inc. PowerEdge R620/0KCKR5, BIOS 1.4.8 10/25/2012
task: ffff88042ecf8760 ti: ffff88042f106000 task.ti: ffff88042f106000
RIP: 0010:[<ffffffffa05f9ca7>]  [<ffffffffa05f9ca7>]
vxlan_dellink+0x77/0xf0 [vxlan]
RSP: 0018:ffff88042f107e28  EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff88082af08000 RCX: ffff88083fd80000
RDX: 0000000000000000 RSI: ffff88042f107e58 RDI: ffff88042e12f810
RBP: ffff88042f107e48 R08: ffffffff8166eca0 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffff88082af087c0
R13: ffff88042e12f000 R14: ffff88042f107e58 R15: ffff88042f107e58
FS:  00007f4ed2de7700(0000) GS:ffff88043fc80000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000042e076000 CR4: 00000000000407e0
Stack:
 ffff88082af08000 ffffffff81654848 ffffffffa05fb4e0 ffffffff81654780
 ffff88042f107e98 ffffffff813b9c7a ffff88042f107e58 ffff88042f107e58
 ffff88042f107e88 ffffffffa05fb4e0 ffffffffa05fb780 ffff88042f107f18
Call Trace:
 [<ffffffff813b9c7a>] __rtnl_link_unregister+0xca/0xd0
 [<ffffffff813bb0e9>] rtnl_link_unregister+0x19/0x30
 [<ffffffffa05faa4c>] vxlan_cleanup_module+0x10/0x2f [vxlan]
 [<ffffffff81099fef>] SyS_delete_module+0x1cf/0x2c0
 [<ffffffff8146c069>] ? do_page_fault+0x9/0x10
 [<ffffffff8146f012>] system_call_fastpath+0x16/0x1b
Code: 4d 85 ed 0f 84 95 00 00 00 4c 8d a7 c0 07 00 00 49 8d bd 10 08 00
00 e8 28 e8 e6 e0 48 8b 83 c0 07 00 00 49 8b 54 24 08 48 85 c0 <48> 89
02 74 04 48 89 50 08 49 b8 00 02 20 00 00 00 ad de 4d 89
RIP  [<ffffffffa05f9ca7>] vxlan_dellink+0x77/0xf0 [vxlan]
 RSP <ffff88042f107e28>
CR2: 0000000000000000
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This commit implements the ->ndo_do_ioctl() operation so that the
PHY-related ioctl() calls can work from userspace, which allows
applications like mii-tool or mii-diag to do their job.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This commit fixes a long-standing bug that has been reported by many
users: on some Armada 370 platforms, only the network interface that
has been used in U-Boot to tftp the kernel works properly in
Linux. The other network interfaces can see a 'link up', but are
unable to transmit data. The reports were generally made on the Armada
370-based Mirabox, but have also been given on the Armada 370-RD
board.

The network MAC in the Armada 370/XP (supported by the mvneta driver
in Linux) has a functionality that allows it to continuously poll the
PHY and directly update the MAC configuration accordingly (speed,
duplex, etc.). The very first versions of the driver submitted for
review were using this hardware mechanism, but due to this, the driver
was not integrated with the kernel phylib. Following reviews, the
driver was changed to use the phylib, and therefore a software based
polling. In software based polling, Linux regularly talks to the PHY
over the MDIO bus, and sees if the link status has changed. If it's
the case then the adjust_link() callback of the driver is called to
update the MAC configuration accordingly.

However, it turns out that the adjust_link() callback was not
configuring the hardware in a completely correct way: while it was
setting the speed and duplex bits correctly, it wasn't telling the
hardware to actually take into account those bits rather than what the
hardware-based PHY polling mechanism has concluded. So, in fact the
adjust_link() callback was basically a no-op.

However, the network happened to be working because on the network
interfaces used by U-Boot for tftp on Armada 370 platforms because the
hardware PHY polling was enabled by the bootloader, and left enabled
by Linux. However, the second network interface not used for tftp (or
both network interfaces if the kernel is loaded from USB, NAND or SD
card) didn't had the hardware PHY polling enabled.

This patch fixes this situation by:

 (1) Making sure that the hardware PHY polling is disabled by clearing
     the MVNETA_PHY_POLLING_ENABLE bit in the MVNETA_UNIT_CONTROL
     register in the driver ->probe() function.

 (2) Making sure that the duplex and speed selections made by the
     adjust_link() callback are taken into account by clearing the
     MVNETA_GMAC_AN_SPEED_EN and MVNETA_GMAC_AN_DUPLEX_EN bits in the
     MVNETA_GMAC_AUTONEG_CONFIG register.

This patch has been tested on Armada 370 Mirabox, and now both network
interfaces are usable after boot.

[ Problem introduced by commit c5aff182 ("net: mvneta: driver for
  Marvell Armada 370/XP network unit") ]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Jochen De Smet <jochen.armkernel@leahnim.org>
Cc: Peter Sanford <psanford@nearbuy.io>
Cc: Ethan Tuttle <ethan@ethantuttle.com>
Cc: Chény Yves-Gael <yves@cheny.fr>
Cc: Ryan Press <ryan@presslab.us>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: vdonnefort@lacie.com
Cc: stable@vger.kernel.org
Acked-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Vincent Donnefort <vdonnefort@gmail.com>
Tested-by: Yves-Gael Cheny <yves@cheny.fr>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove the __LINK_STATE_START check to verify the device is running, in
favor of netif_running().  netif_running() performs the same check of
__LINK_STATE_START, so the code should behave the same.
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Cc: Sorbica Shieh <sorbica@icplus.com.tw>
Signed-off-by: David S. Miller <davem@davemloft.net>

copying large files to a NFS mounted host was taking absurdly large
time.

Turns out that TX BD reclaim had a sublte bug.

Loop starts off from @txbd_dirty cursor and stops when it hits a BD
still in use by controller. However when it stops it needs to keep the
cursor at that very BD to resume scanning in next iteration. However it
was erroneously incrementing the cursor, causing the next scan(s) to
fail too, unless the BD chain was completely drained out.

[ARCLinux]$ ls -l -sh /disk/log.txt
 17976 -rw-r--r--    1 root     root       17.5M Sep  /disk/log.txt

========== Before =====================
[ARCLinux]$ time cp /disk/log.txt /mnt/.
real    31m 7.95s
user    0m 0.00s
sys     0m 0.10s

========== After =====================
[ARCLinux]$ time cp /disk/log.txt /mnt/.
real    0m 24.33s
user    0m 0.00s
sys     0m 0.19s
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com> (commit_signer:3/4=75%)
Cc: "David S. Miller" <davem@davemloft.net> (commit_signer:3/4=75%)
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: arc-linux-dev@synopsys.com
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull drm tree changes from Dave Airlie:
 "This is the main drm pull request, I have some overlap with sound and
  arm-soc, the sound patch is acked and may conflict based on -next
  reports but should be a trivial fixup, which I'll leave to you!

  Highlights:

   - new drivers:

     MSM driver from Rob Clark

   - non-drm:

     switcheroo and hdmi audio driver support for secondary GPU
     poweroff, so drivers can use runtime PM to poweroff the GPUs.  This
     can save 5 or 6W on some optimus laptops.

   - drm core:

     combined GEM and TTM VMA manager
     per-filp mmap permission tracking
     initial rendernode support (via a runtime enable for now, until we get api stable),
     remove old proc support,
     lots of cleanups of legacy code
     hdmi vendor infoframes and 4k modes
     lots of gem/prime locking and races fixes
     async pageflip scaffolding
     drm bridge objects

   - i915:

     Haswell PC8+ support and eLLC support, HDMI 4K support, initial
     per-process VMA pieces, watermark reworks, convert to generic hdmi
     infoframes, encoder reworking, fastboot support,

   - radeon:

     CIK PM support, remove 3d blit code in favour of DMA engines,
     Berlin GPU support, HDMI audio fixes

   - nouveau:

     secondary GPU power down support for optimus laptops, lots of
     fixes, use MSI, VP3 engine support

   - exynos:

     runtime pm support for g2d, DT support, remove non-DT,

   - tda998x i2c driver:

     lots of fixes for sync issues

   - gma500:

     lots of cleanups

   - rcar:

     add LVDS support, fbdev emulation,

   - tegra:

     just minor fixes"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (684 commits)
  drm/exynos: Fix build error with exynos_drm_connector.c
  drm/exynos: Remove non-DT support in exynos_drm_fimd
  drm/exynos: Remove non-DT support in exynos_hdmi
  drm/exynos: Remove non-DT support in exynos_drm_g2d
  drm/exynos: Remove non-DT support in exynos_hdmiphy
  drm/exynos: Remove non-DT support in exynos_ddc
  drm/exynos: Make Exynos DRM drivers depend on OF
  drm/exynos: Consider fallback option to allocation fail
  drm/exynos: fimd: move platform data parsing to separate function
  drm/exynos: fimd: get signal polarities from device tree
  drm/exynos: fimd: replace struct fb_videomode with videomode
  drm/exynos: check a pixel format to a particular window layer
  drm/exynos: fix fimd pixel format setting
  drm/exynos: Add NULL pointer check
  drm/exynos: Remove redundant error messages
  drm/exynos: Add missing of.h header include
  drm/exynos: Remove redundant NULL check in exynos_drm_buf
  drm/exynos: add device tree support for rotator
  drm/exynos: Add missing includes
  drm/exynos: add runtime pm interfaces to g2d driver
  ...

Pull fbdev changes from Tomi Valkeinen:
 - Improvements to da8xx-fb to make it support v2 of the LCDC IP, used
   eg in BeagleBone
 - Himax HX8369 controller support
 - Various small fixes and cleanups

* tag 'fbdev-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (42 commits)
  video: da8xx-fb: fix the polarities of the hsync/vsync pulse
  video: da8xx-fb: support lcdc v2 timing register expansion
  video: da8xx-fb: fixing timing off by one errors
  video: da8xx-fb fixing incorrect porch mappings
  video: xilinxfb: replace devm_request_and_ioremap by devm_ioremap_resource
  fbmem: move EXPORT_SYMBOL annotation next to symbol declarations
  drivers: video: fbcmap: remove the redundency and incorrect checkings
  video: mxsfb: simplify use of devm_ioremap_resource
  Release efifb's colormap in efifb_destroy()
  at91/avr32/atmel_lcdfb: prepare clk before calling enable
  video: exynos: Ensure definitions match prototypes
  OMAPDSS: fix WARN_ON in 'alpha_blending_enabled' sysfs file
  OMAPDSS: HDMI: Fix possible NULL reference
  video: da8xx-fb: adding am33xx as dependency
  video: da8xx-fb: let compiler decide what to inline
  video: da8xx-fb: make clock naming consistent
  video: da8xx-fb: set upstream clock rate (if reqd)
  video: da8xx-fb: reorganize panel detection
  video: da8xx-fb: ensure non-null cfg in pdata
  video: da8xx-fb: use devres
  ...

sock_tx_timestamp() will clear all zerocopy flags of skb which may lead the
frags never to be orphaned. This will break guest to guest traffic when zerocopy
is enabled. Fix this by orphaning the frags before trying to set tx time stamp.

The issue were introduced by commit eda29772
(tun: Support software transmit time stamping).

Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit eda29772
(tun: Support software transmit time stamping) will queue skbs into error queue
when tx stamping is enabled. But it forgets to purge the error queue during
detach. This patch fixes this.

Cc: Richard Cochran <richardcochran@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 82dc3c63 ("net: introduce NAPI_POLL_WEIGHT")
netif_napi_add() produces an error message if a NAPI poll weight
greater than 64 is requested.

qlcnic requests the weight as large as 256 for some of its rings, and
smaller values for other rings. For instance in qlcnic_82xx_napi_add()
I think the intention was to give the tx+rx ring a bigger weight than
to rx-only rings, but it's actually doing the opposite. So I'm assuming
the weights do not really matter much.

Just use the standard NAPI weights for all rings.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RFC 4861 says that the IP source address of the Redirect is the
same as the current first-hop router for the specified ICMP
Destination Address, so the gateway should be taken into
consideration when we find the route for redirect.

There was once a check in commit
a6279458 ("NDISC: Search over
all possible rules on receipt of redirect.") and the check
went away in commit b94f1c09
("ipv6: Use icmpv6_notify() to propagate redirect, instead of
rt6_redirect()").

The bug is only "exploitable" on layer-2 because the source
address of the redirect is checked to be a valid link-local
address but it makes spoofing a lot easier in the same L2
domain nonetheless.

Thanks very much for Hannes's help.
Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>