1. 16 Sep, 2019 40 commits
    • Jonathan Bakker's avatar
      dt-bindings: iio: adc: exynos-adc: Add S5PV210 variant · 4e516b72
      Jonathan Bakker authored
      [ Upstream commit a9b0a2a7 ]
      
      Add information about new compatible for S5PV210
      Signed-off-by: default avatarJonathan Bakker <xc-racer2@live.ca>
      Signed-off-by: default avatarPaweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
      Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      4e516b72
    • Jonathan Bakker's avatar
      iio: adc: exynos-adc: Add S5PV210 variant · 7f588a72
      Jonathan Bakker authored
      [ Upstream commit 882bf52f ]
      
      S5PV210's ADC variant is almost the same as v1 except that it has 10
      channels and doesn't require the pmu register
      Signed-off-by: default avatarJonathan Bakker <xc-racer2@live.ca>
      Signed-off-by: default avatarPaweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
      Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      7f588a72
    • Sean Christopherson's avatar
      KVM: VMX: Compare only a single byte for VMCS' "launched" in vCPU-run · cd490d44
      Sean Christopherson authored
      [ Upstream commit 61c08aa9 ]
      
      The vCPU-run asm blob does a manual comparison of a VMCS' launched
      status to execute the correct VM-Enter instruction, i.e. VMLAUNCH vs.
      VMRESUME.  The launched flag is a bool, which is a typedef of _Bool.
      C99 does not define an exact size for _Bool, stating only that is must
      be large enough to hold '0' and '1'.  Most, if not all, compilers use
      a single byte for _Bool, including gcc[1].
      
      Originally, 'launched' was of type 'int' and so the asm blob used 'cmpl'
      to check the launch status.  When 'launched' was moved to be stored on a
      per-VMCS basis, struct vcpu_vmx's "temporary" __launched flag was added
      in order to avoid having to pass the current VMCS into the asm blob.
      The new  '__launched' was defined as a 'bool' and not an 'int', but the
      'cmp' instruction was not updated.
      
      This has not caused any known problems, likely due to compilers aligning
      variables to 4-byte or 8-byte boundaries and KVM zeroing out struct
      vcpu_vmx during allocation.  I.e. vCPU-run accesses "junk" data, it just
      happens to always be zero and so doesn't affect the result.
      
      [1] https://gcc.gnu.org/ml/gcc-patches/2000-10/msg01127.html
      
      Fixes: d462b819 ("KVM: VMX: Keep list of loaded VMCSs, instead of vcpus")
      Cc: <stable@vger.kernel.org>
      Reviewed-by: default avatarJim Mattson <jmattson@google.com>
      Reviewed-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      Signed-off-by: default avatarSean Christopherson <sean.j.christopherson@intel.com>
      Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      cd490d44
    • Tang Junhui's avatar
      bcache: treat stale && dirty keys as bad keys · 687e470e
      Tang Junhui authored
      [ Upstream commit 58ac3230 ]
      
      Stale && dirty keys can be produced in the follow way:
      After writeback in write_dirty_finish(), dirty keys k1 will
      replace by clean keys k2
      ==>ret = bch_btree_insert(dc->disk.c, &keys, NULL, &w->key);
      ==>btree_insert_fn(struct btree_op *b_op, struct btree *b)
      ==>static int bch_btree_insert_node(struct btree *b,
             struct btree_op *op,
             struct keylist *insert_keys,
             atomic_t *journal_ref,
      Then two steps:
      A) update k1 to k2 in btree node memory;
         bch_btree_insert_keys(b, op, insert_keys, replace_key)
      B) Write the bset(contains k2) to cache disk by a 30s delay work
         bch_btree_leaf_dirty(b, journal_ref).
      But before the 30s delay work write the bset to cache device,
      these things happened:
      A) GC works, and reclaim the bucket k2 point to;
      B) Allocator works, and invalidate the bucket k2 point to,
         and increase the gen of the bucket, and place it into free_inc
         fifo;
      C) Until now, the 30s delay work still does not finish work,
         so in the disk, the key still is k1, it is dirty and stale
         (its gen is smaller than the gen of the bucket). and then the
         machine power off suddenly happens;
      D) When the machine power on again, after the btree reconstruction,
         the stale dirty key appear.
      
      In bch_extent_bad(), when expensive_debug_checks is off, it would
      treat the dirty key as good even it is stale keys, and it would
      cause bellow probelms:
      A) In read_dirty() it would cause machine crash:
         BUG_ON(ptr_stale(dc->disk.c, &w->key, 0));
      B) It could be worse when reads hits stale dirty keys, it would
         read old incorrect data.
      
      This patch tolerate the existence of these stale && dirty keys,
      and treat them as bad key in bch_extent_bad().
      
      (Coly Li: fix indent which was modified by sender's email client)
      Signed-off-by: default avatarTang Junhui <tang.junhui.linux@gmail.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarColy Li <colyli@suse.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      687e470e
    • Coly Li's avatar
      bcache: replace hard coded number with BUCKET_GC_GEN_MAX · d1cec665
      Coly Li authored
      [ Upstream commit 149d0efa ]
      
      In extents.c:bch_extent_bad(), number 96 is used as parameter to call
      btree_bug_on(). The purpose is to check whether stale gen value exceeds
      BUCKET_GC_GEN_MAX, so it is better to use macro BUCKET_GC_GEN_MAX to
      make the code more understandable.
      Signed-off-by: default avatarColy Li <colyli@suse.de>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      d1cec665
    • Jarkko Sakkinen's avatar
      tpm: Fix some name collisions with drivers/char/tpm.h · ee30121f
      Jarkko Sakkinen authored
      [ Upstream commit 8ab547a2 ]
      
      * Rename TPM_BUFSIZE defined in drivers/char/tpm/st33zp24/st33zp24.h to
        ST33ZP24_BUFSIZE.
      * Rename TPM_BUFSIZE defined in drivers/char/tpm/tpm_i2c_infineon.c to
        TPM_I2C_INFINEON_BUFSIZE.
      * Rename TPM_RETRY in tpm_i2c_nuvoton to TPM_I2C_RETRIES.
      * Remove TPM_HEADER_SIZE from tpm_i2c_nuvoton.
      
      Cc: stable@vger.kernel.org
      Fixes: bf38b871 ("tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy)")
      Fixes: aad628c1 ("char/tpm: Add new driver for Infineon I2C TIS TPM")
      Fixes: 32d33b29 ("TPM: Retry SaveState command in suspend path")
      Signed-off-by: default avatarJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      ee30121f
    • Jarkko Nikula's avatar
      mfd: Kconfig: Fix I2C_DESIGNWARE_PLATFORM dependencies · c207ac66
      Jarkko Nikula authored
      [ Upstream commit 09fdc985 ]
      
      INTEL_SOC_PMIC, INTEL_SOC_PMIC_CHTWC and MFD_TPS68470 select the
      I2C_DESIGNWARE_PLATFORM without its dependencies making it possible to see
      warning and build error like below:
      
      WARNING: unmet direct dependencies detected for I2C_DESIGNWARE_PLATFORM
        Depends on [n]: I2C [=y] && HAS_IOMEM [=y] && (ACPI [=y] && COMMON_CLK [=n] || !ACPI [=y])
        Selected by [y]:
        - MFD_TPS68470 [=y] && HAS_IOMEM [=y] && ACPI [=y] && I2C [=y]=y
      
      /usr/bin/ld: drivers/i2c/busses/i2c-designware-platdrv.o: in function `dw_i2c_plat_resume':
      i2c-designware-platdrv.c:(.text+0x62): undefined reference to `i2c_dw_prepare_clk'
      /usr/bin/ld: drivers/i2c/busses/i2c-designware-platdrv.o: in function `dw_i2c_plat_suspend':
      i2c-designware-platdrv.c:(.text+0x9a): undefined reference to `i2c_dw_prepare_clk'
      /usr/bin/ld: drivers/i2c/busses/i2c-designware-platdrv.o: in function `dw_i2c_plat_probe':
      i2c-designware-platdrv.c:(.text+0x41c): undefined reference to `i2c_dw_prepare_clk'
      /usr/bin/ld: i2c-designware-platdrv.c:(.text+0x438): undefined reference to `i2c_dw_read_comp_param'
      /usr/bin/ld: i2c-designware-platdrv.c:(.text+0x545): undefined reference to `i2c_dw_probe'
      /usr/bin/ld: i2c-designware-platdrv.c:(.text+0x727): undefined reference to `i2c_dw_probe_slave'
      
      Fix this by making above options to depend on I2C_DESIGNWARE_PLATFORM
      being built-in. I2C_DESIGNWARE_PLATFORM is a visible symbol with
      dependencies so in general the select should be avoided.
      
      Fixes: acebcff9 ("mfd: intel_soc_pmic: Select designware i2c-bus driver")
      Fixes: de85d79f ("mfd: Add Cherry Trail Whiskey Cove PMIC driver")
      Fixes: 9bbf6a15 ("mfd: Add support for TPS68470 device")
      Cc: Stable <stable@vger.kernel.org> # v4.14+
      Reported-by: default avatarRandy Dunlap <rdunlap@infradead.org>
      Signed-off-by: default avatarJarkko Nikula <jarkko.nikula@linux.intel.com>
      Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
      Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      c207ac66
    • José Roberto de Souza's avatar
      drm/i915/ilk: Fix warning when reading emon_status with no output · 6fd5e50a
      José Roberto de Souza authored
      [ Upstream commit cab870b7 ]
      
      When there is no output no one will hold a runtime_pm reference
      causing a warning when trying to read emom_status in debugfs.
      
      [22.756480] ------------[ cut here ]------------
      [22.756489] RPM wakelock ref not held during HW access
      [22.756578] WARNING: CPU: 0 PID: 1058 at drivers/gpu/drm/i915/intel_drv.h:2104 gen5_read32+0x16b/0x1a0 [i915]
      [22.756580] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic i915 coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core e1000e snd_pcm mei_me prime_numbers mei lpc_ich
      [22.756595] CPU: 0 PID: 1058 Comm: debugfs_test Not tainted 4.20.0-rc1-CI-Trybot_3219+ #1
      [22.756597] Hardware name: Hewlett-Packard HP Compaq 8100 Elite SFF PC/304Ah, BIOS 786H1 v01.13 07/14/2011
      [22.756634] RIP: 0010:gen5_read32+0x16b/0x1a0 [i915]
      [22.756637] Code: a4 ea e0 0f 0b e9 d2 fe ff ff 80 3d a5 71 19 00 00 0f 85 d3 fe ff ff 48 c7 c7 48 d0 2d a0 c6 05 91 71 19 00 01 e8 35 a4 ea e0 <0f> 0b e9 b9 fe ff ff e8 69 c6 f2 e0 85 c0 75 92 48 c7 c2 78 d0 2d
      [22.756639] RSP: 0018:ffffc90000f1fd38 EFLAGS: 00010282
      [22.756642] RAX: 0000000000000000 RBX: ffff8801f7ab0000 RCX: 0000000000000006
      [22.756643] RDX: 0000000000000006 RSI: ffffffff8212886a RDI: ffffffff820d6d57
      [22.756645] RBP: 0000000000011020 R08: 0000000043e3d1a8 R09: 0000000000000000
      [22.756647] R10: ffffc90000f1fd80 R11: 0000000000000000 R12: 0000000000000001
      [22.756649] R13: ffff8801f7ab0068 R14: 0000000000000001 R15: ffff88020d53d188
      [22.756651] FS:  00007f2878849980(0000) GS:ffff880213a00000(0000) knlGS:0000000000000000
      [22.756653] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [22.756655] CR2: 00005638deedf028 CR3: 0000000203292001 CR4: 00000000000206f0
      [22.756657] Call Trace:
      [22.756689]  i915_mch_val+0x1b/0x60 [i915]
      [22.756721]  i915_emon_status+0x45/0xd0 [i915]
      [22.756730]  seq_read+0xdb/0x3c0
      [22.756736]  ? lockdep_hardirqs_off+0x94/0xd0
      [22.756740]  ? __slab_free+0x24e/0x510
      [22.756746]  full_proxy_read+0x52/0x90
      [22.756752]  __vfs_read+0x31/0x170
      [22.756759]  ? do_sys_open+0x13b/0x240
      [22.756763]  ? rcu_read_lock_sched_held+0x6f/0x80
      [22.756766]  vfs_read+0x9e/0x140
      [22.756770]  ksys_read+0x50/0xc0
      [22.756775]  do_syscall_64+0x55/0x190
      [22.756781]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
      [22.756783] RIP: 0033:0x7f28781dc34e
      [22.756786] Code: 00 00 00 00 48 8b 15 71 8c 20 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff c3 0f 1f 40 00 8b 05 ba d0 20 00 85 c0 75 16 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 5a f3 c3 0f 1f 84 00 00 00 00 00 41 54 55 49
      [22.756787] RSP: 002b:00007ffd33fa0d08 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
      [22.756790] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f28781dc34e
      [22.756792] RDX: 0000000000000200 RSI: 00007ffd33fa0d50 RDI: 0000000000000008
      [22.756794] RBP: 00007ffd33fa0f60 R08: 0000000000000000 R09: 0000000000000020
      [22.756796] R10: 0000000000000000 R11: 0000000000000246 R12: 00005638de45c2c0
      [22.756797] R13: 00007ffd33fa14b0 R14: 0000000000000000 R15: 0000000000000000
      [22.756806] irq event stamp: 47950
      [22.756811] hardirqs last  enabled at (47949): [<ffffffff810fba74>] vprintk_emit+0x124/0x320
      [22.756813] hardirqs last disabled at (47950): [<ffffffff810019b0>] trace_hardirqs_off_thunk+0x1a/0x1c
      [22.756816] softirqs last  enabled at (47518): [<ffffffff81c0033a>] __do_softirq+0x33a/0x4b9
      [22.756820] softirqs last disabled at (47479): [<ffffffff8108df29>] irq_exit+0xa9/0xc0
      [22.756858] WARNING: CPU: 0 PID: 1058 at drivers/gpu/drm/i915/intel_drv.h:2104 gen5_read32+0x16b/0x1a0 [i915]
      [22.756860] ---[ end trace bf56fa7d6a3cbf7a ]
      Signed-off-by: default avatarJosé Roberto de Souza <jose.souza@intel.com>
      Reviewed-by: default avatarRodrigo Vivi <rodrigo.vivi@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20181119230101.32460-1-jose.souza@intel.comSigned-off-by: default avatarSasha Levin <sashal@kernel.org>
      6fd5e50a
    • Ville Syrjälä's avatar
      drm/vblank: Allow dynamic per-crtc max_vblank_count · 2b4f5679
      Ville Syrjälä authored
      [ Upstream commit ed20151a ]
      
      On i965gm we need to adjust max_vblank_count dynamically
      depending on whether the TV encoder is used or not. To
      that end add a per-crtc max_vblank_count that takes
      precedence over its device wide counterpart. The driver
      can now call drm_crtc_set_max_vblank_count() to configure
      the per-crtc value before calling drm_vblank_on().
      
      Also looks like there was some discussion about exynos needing
      similar treatment.
      
      v2: Drop the extra max_vblank_count!=0 check for the
          WARN(last!=current), will take care of it in i915 code (Daniel)
          WARN_ON(!inmodeset) (Daniel)
          WARN_ON(dev->max_vblank_count)
          Pimp up the docs (Daniel)
      
      Cc: stable@vger.kernel.org
      Cc: Inki Dae <inki.dae@samsung.com>
      Cc: Daniel Vetter <daniel@ffwll.ch>
      Signed-off-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20181127182004.28885-1-ville.syrjala@linux.intel.comReviewed-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      2b4f5679
    • Gilad Ben-Yossef's avatar
      crypto: ccree - add missing inline qualifier · 71f71910
      Gilad Ben-Yossef authored
      [ Upstream commit f1071c3e ]
      
      Commit 1358c13a ("crypto: ccree - fix resume race condition on init")
      was missing a "inline" qualifier for stub function used when CONFIG_PM
      is not set causing a build warning.
      
      Fixes: 1358c13a ("crypto: ccree - fix resume race condition on init")
      Cc: stable@kernel.org # v4.20
      Signed-off-by: default avatarGilad Ben-Yossef <gilad@benyossef.com>
      Acked-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
      Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      71f71910
    • Gilad Ben-Yossef's avatar
      crypto: ccree - fix resume race condition on init · 72eec6b3
      Gilad Ben-Yossef authored
      [ Upstream commit 1358c13a ]
      
      We were enabling autosuspend, which is using data set by the
      hash module, prior to the hash module being inited, casuing
      a crash on resume as part of the startup sequence if the race
      was lost.
      
      This was never a real problem because the PM infra was using low
      res timers so we were always winning the race, until commit 8234f673
      ("PM-runtime: Switch autosuspend over to using hrtimers") changed that :-)
      
      Fix this by seperating the PM setup and enablement and doing the
      latter only at the end of the init sequence.
      Signed-off-by: default avatarGilad Ben-Yossef <gilad@benyossef.com>
      Cc: Vincent Guittot <vincent.guittot@linaro.org>
      Cc: stable@kernel.org # v4.20
      Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      72eec6b3
    • Yishai Hadas's avatar
      IB/uverbs: Fix OOPs upon device disassociation · f0e28655
      Yishai Hadas authored
      [ Upstream commit 425784aa ]
      
      The async_file might be freed before the disassociation has been ended,
      causing qp shutdown to use after free on it.
      
      Since uverbs_destroy_ufile_hw is not a fence, it returns if a
      disassociation is ongoing in another thread. It has to be written this way
      to avoid deadlock. However this means that the ufile FD close cannot
      destroy anything that may still be used by an active kref, such as the the
      async_file.
      
      To fix that move the kref_put() to be in ib_uverbs_release_file().
      
       BUG: unable to handle kernel paging request at ffffffffba682787
       PGD bc80e067 P4D bc80e067 PUD bc80f063 PMD 1313df163 PTE 80000000bc682061
       Oops: 0003 [#1] SMP PTI
       CPU: 1 PID: 32410 Comm: bash Tainted: G           OE 4.20.0-rc6+ #3
       Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
       RIP: 0010:__pv_queued_spin_lock_slowpath+0x1b3/0x2a0
       Code: 98 83 e2 60 49 89 df 48 8b 04 c5 80 18 72 ba 48 8d
      		ba 80 32 02 00 ba 00 80 00 00 4c 8d 65 14 41 bd 01 00 00 00 48 01 c7 85
      		d2 <48> 89 2f 48 89 fb 74 14 8b 45 08 85 c0 75 42 84 d2 74 6b f3 90 83
       RSP: 0018:ffffc1bbc064fb58 EFLAGS: 00010006
       RAX: ffffffffba65f4e7 RBX: ffff9f209c656c00 RCX: 0000000000000001
       RDX: 0000000000008000 RSI: 0000000000000000 RDI: ffffffffba682787
       RBP: ffff9f217bb23280 R08: 0000000000000001 R09: 0000000000000000
       R10: ffff9f209d2c7800 R11: ffffffffffffffe8 R12: ffff9f217bb23294
       R13: 0000000000000001 R14: 0000000000000000 R15: ffff9f209c656c00
       FS:  00007fac55aad740(0000) GS:ffff9f217bb00000(0000) knlGS:0000000000000000
       CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
       CR2: ffffffffba682787 CR3: 000000012f8e0000 CR4: 00000000000006e0
       Call Trace:
        _raw_spin_lock_irq+0x27/0x30
        ib_uverbs_release_uevent+0x1e/0xa0 [ib_uverbs]
        uverbs_free_qp+0x7e/0x90 [ib_uverbs]
        destroy_hw_idr_uobject+0x1c/0x50 [ib_uverbs]
        uverbs_destroy_uobject+0x2e/0x180 [ib_uverbs]
        __uverbs_cleanup_ufile+0x73/0x90 [ib_uverbs]
        uverbs_destroy_ufile_hw+0x5d/0x120 [ib_uverbs]
        ib_uverbs_remove_one+0xea/0x240 [ib_uverbs]
        ib_unregister_device+0xfb/0x200 [ib_core]
        mlx5_ib_remove+0x51/0xe0 [mlx5_ib]
        mlx5_remove_device+0xc1/0xd0 [mlx5_core]
        mlx5_unregister_device+0x3d/0xb0 [mlx5_core]
        remove_one+0x2a/0x90 [mlx5_core]
        pci_device_remove+0x3b/0xc0
        device_release_driver_internal+0x16d/0x240
        unbind_store+0xb2/0x100
        kernfs_fop_write+0x102/0x180
        __vfs_write+0x36/0x1a0
        ? __alloc_fd+0xa9/0x170
        ? set_close_on_exec+0x49/0x70
        vfs_write+0xad/0x1a0
        ksys_write+0x52/0xc0
        do_syscall_64+0x5b/0x180
        entry_SYSCALL_64_after_hwframe+0x44/0xa9
       RIP: 0033:0x7fac551aac60
      
      Cc: <stable@vger.kernel.org> # 4.2
      Fixes: 036b1063 ("IB/uverbs: Enable device removal when there are active user space applications")
      Signed-off-by: default avatarYishai Hadas <yishaih@mellanox.com>
      Signed-off-by: default avatarLeon Romanovsky <leonro@mellanox.com>
      Signed-off-by: default avatarJason Gunthorpe <jgg@mellanox.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      f0e28655
    • Vineet Gupta's avatar
      ARC: mm: do_page_fault fixes #1: relinquish mmap_sem if signal arrives while handle_mm_fault · 8c6fb55a
      Vineet Gupta authored
      [ Upstream commit 4d447455 ]
      
      do_page_fault() forgot to relinquish mmap_sem if a signal came while
      handling handle_mm_fault() - due to say a ctl+c or oom etc.
      This would later cause a deadlock by acquiring it twice.
      
      This came to light when running libc testsuite tst-tls3-malloc test but
      is likely also the cause for prior seen LTP failures. Using lockdep
      clearly showed what the issue was.
      
      | # while true; do ./tst-tls3-malloc ; done
      | Didn't expect signal from child: got `Segmentation fault'
      | ^C
      | ============================================
      | WARNING: possible recursive locking detected
      | 4.17.0+ #25 Not tainted
      | --------------------------------------------
      | tst-tls3-malloc/510 is trying to acquire lock:
      | 606c7728 (&mm->mmap_sem){++++}, at: __might_fault+0x28/0x5c
      |
      |but task is already holding lock:
      |606c7728 (&mm->mmap_sem){++++}, at: do_page_fault+0x9c/0x2a0
      |
      | other info that might help us debug this:
      |  Possible unsafe locking scenario:
      |
      |       CPU0
      |       ----
      |  lock(&mm->mmap_sem);
      |  lock(&mm->mmap_sem);
      |
      | *** DEADLOCK ***
      |
      
      ------------------------------------------------------------
      What the change does is not obvious (note to myself)
      
      prior code was
      
      | do_page_fault
      |
      |   down_read()		<-- lock taken
      |   handle_mm_fault	<-- signal pending as this runs
      |   if fatal_signal_pending
      |       if VM_FAULT_ERROR
      |           up_read
      |       if user_mode
      |          return	<-- lock still held, this was the BUG
      
      New code
      
      | do_page_fault
      |
      |   down_read()		<-- lock taken
      |   handle_mm_fault	<-- signal pending as this runs
      |   if fatal_signal_pending
      |       if VM_FAULT_RETRY
      |          return       <-- not same case as above, but still OK since
      |                           core mm already relinq lock for FAULT_RETRY
      |    ...
      |
      |   < Now falls through for bug case above >
      |
      |   up_read()		<-- lock relinquished
      
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarVineet Gupta <vgupta@synopsys.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      8c6fb55a
    • Vineet Gupta's avatar
      ARC: show_regs: lockdep: re-enable preemption · 96af7d92
      Vineet Gupta authored
      [ Upstream commit f731a8e8 ]
      
      signal handling core calls show_regs() with preemption disabled which
      on ARC takes mmap_sem for mm/vma access, causing lockdep splat.
      
      | [ARCLinux]# ./segv-null-ptr
      | potentially unexpected fatal signal 11.
      | BUG: sleeping function called from invalid context at kernel/fork.c:1011
      | in_atomic(): 1, irqs_disabled(): 0, pid: 70, name: segv-null-ptr
      | no locks held by segv-null-ptr/70.
      | CPU: 0 PID: 70 Comm: segv-null-ptr Not tainted 4.18.0+ #69
      |
      | Stack Trace:
      |  arc_unwind_core+0xcc/0x100
      |  ___might_sleep+0x17a/0x190
      |  mmput+0x16/0xb8
      |  show_regs+0x52/0x310
      |  get_signal+0x5ee/0x610
      |  do_signal+0x2c/0x218
      |  resume_user_mode_begin+0x90/0xd8
      
      Workaround by re-enabling preemption temporarily.
      
      Note that the preemption disabling in core code around show_regs()
      was introduced by commit 3a9f84d3 ("signals, debug: fix BUG: using
      smp_processor_id() in preemptible code in print_fatal_signal()")
      
      to silence a differnt lockdep seen on x86 bakc in 2009.
      
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarVineet Gupta <vgupta@synopsys.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      96af7d92
    • Hans Verkuil's avatar
      media: vim2m: only cancel work if it is for right context · 424b75b7
      Hans Verkuil authored
      [ Upstream commit 240809ef ]
      
      cancel_delayed_work_sync() was called for any queue, but it should only
      be called for the queue that is associated with the currently running job.
      
      Otherwise, if two filehandles are streaming at the same time, then closing the
      first will cancel the work which might still be running for a job from the
      second filehandle. As a result the second filehandle will never be able to
      finish the job and an attempt to stop streaming on that second filehandle will
      stall.
      
      Fixes: 52117be6 ("media: vim2m: use cancel_delayed_work_sync instead of flush_schedule_work")
      Signed-off-by: default avatarHans Verkuil <hverkuil-cisco@xs4all.nl>
      Cc: <stable@vger.kernel.org>      # for v4.20 and up
      Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+samsung@kernel.org>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      424b75b7
    • Qu Wenruo's avatar
      btrfs: Use real device structure to verify dev extent · be77686f
      Qu Wenruo authored
      [ Upstream commit 1b3922a8 ]
      
      [BUG]
      Linux v5.0-rc1 will fail fstests/btrfs/163 with the following kernel
      message:
      
        BTRFS error (device dm-6): dev extent devid 1 physical offset 13631488 len 8388608 is beyond device boundary 0
        BTRFS error (device dm-6): failed to verify dev extents against chunks: -117
        BTRFS error (device dm-6): open_ctree failed
      
      [CAUSE]
      Commit cf90d884 ("btrfs: Introduce mount time chunk <-> dev extent
      mapping check") introduced strict check on dev extents.
      
      We use btrfs_find_device() with dev uuid and fs uuid set to NULL, and
      only dependent on @devid to find the real device.
      
      For seed devices, we call clone_fs_devices() in open_seed_devices() to
      allow us search seed devices directly.
      
      However clone_fs_devices() just populates devices with devid and dev
      uuid, without populating other essential members, like disk_total_bytes.
      
      This makes any device returned by btrfs_find_device(fs_info, devid,
      NULL, NULL) is just a dummy, with 0 disk_total_bytes, and any dev
      extents on the seed device will not pass the device boundary check.
      
      [FIX]
      This patch will try to verify the device returned by btrfs_find_device()
      and if it's a dummy then re-search in seed devices.
      
      Fixes: cf90d884 ("btrfs: Introduce mount time chunk <-> dev extent mapping check")
      CC: stable@vger.kernel.org # 4.19+
      Reported-by: default avatarFilipe Manana <fdmanana@suse.com>
      Signed-off-by: default avatarQu Wenruo <wqu@suse.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      be77686f
    • Qu Wenruo's avatar
      btrfs: volumes: Make sure no dev extent is beyond device boundary · a2790b99
      Qu Wenruo authored
      [ Upstream commit 05a37c48 ]
      
      Add extra dev extent end check against device boundary.
      Signed-off-by: default avatarQu Wenruo <wqu@suse.com>
      Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      a2790b99
    • Ram Pai's avatar
      powerpc/pkeys: Fix handling of pkey state across fork() · cfbf227e
      Ram Pai authored
      [ Upstream commit 2cd4bd19 ]
      
      Protection key tracking information is not copied over to the
      mm_struct of the child during fork(). This can cause the child to
      erroneously allocate keys that were already allocated. Any allocated
      execute-only key is lost aswell.
      
      Add code; called by dup_mmap(), to copy the pkey state from parent to
      child explicitly.
      
      This problem was originally found by Dave Hansen on x86, which turns
      out to be a problem on powerpc aswell.
      
      Fixes: cf43d3b2 ("powerpc: Enable pkey subsystem")
      Cc: stable@vger.kernel.org # v4.16+
      Reviewed-by: default avatarThiago Jung Bauermann <bauerman@linux.ibm.com>
      Signed-off-by: default avatarRam Pai <linuxram@us.ibm.com>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      cfbf227e
    • Shivasharan S's avatar
      scsi: megaraid_sas: Use 63-bit DMA addressing · 2ad95be1
      Shivasharan S authored
      [ Upstream commit 894169db ]
      
      Although MegaRAID controllers support 64-bit DMA addressing, as per
      hardware design, DMA address with all 64-bits set
      (0xFFFFFFFF-FFFFFFFF) results in a firmware fault.
      
      Driver will set 63-bit DMA mask to ensure the above address will not be
      used.
      
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarShivasharan S <shivasharan.srikanteshwara@broadcom.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      2ad95be1
    • Shivasharan S's avatar
      scsi: megaraid_sas: Add check for reset adapter bit · 3263f786
      Shivasharan S authored
      [ Upstream commit de93b40d ]
      
      For SAS3 and later controllers, FW sets the reset adapter bit indicating
      the driver to perform a controller reset.  Driver needs to check if this
      bit is set before doing a reset.  This reduces the driver probe failure
      time to 180seconds in case there is a faulty controller connected.
      Signed-off-by: default avatarSumit Saxena <sumit.saxena@broadcom.com>
      Signed-off-by: default avatarShivasharan S <shivasharan.srikanteshwara@broadcom.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      3263f786
    • Shivasharan S's avatar
      scsi: megaraid_sas: Fix combined reply queue mode detection · dc4e3ec9
      Shivasharan S authored
      [ Upstream commit e29c3221 ]
      
      For Invader series, if FW supports more than 8 MSI-x vectors, driver needs
      to enable combined reply queue mode. For Ventura series, driver enables
      combined reply queue mode in case of more than 16 MSI-x vectors.
      Signed-off-by: default avatarSumit Saxena <sumit.saxena@broadcom.com>
      Signed-off-by: default avatarShivasharan S <shivasharan.srikanteshwara@broadcom.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      dc4e3ec9
    • Nikolay Borisov's avatar
      btrfs: Fix error handling in btrfs_cleanup_ordered_extents · eb124aaa
      Nikolay Borisov authored
      [ Upstream commit d1051d6e ]
      
      Running btrfs/124 in a loop hung up on me sporadically with the
      following call trace:
      
      	btrfs           D    0  5760   5324 0x00000000
      	Call Trace:
      	 ? __schedule+0x243/0x800
      	 schedule+0x33/0x90
      	 btrfs_start_ordered_extent+0x10c/0x1b0 [btrfs]
      	 ? wait_woken+0xa0/0xa0
      	 btrfs_wait_ordered_range+0xbb/0x100 [btrfs]
      	 btrfs_relocate_block_group+0x1ff/0x230 [btrfs]
      	 btrfs_relocate_chunk+0x49/0x100 [btrfs]
      	 btrfs_balance+0xbeb/0x1740 [btrfs]
      	 btrfs_ioctl_balance+0x2ee/0x380 [btrfs]
      	 btrfs_ioctl+0x1691/0x3110 [btrfs]
      	 ? lockdep_hardirqs_on+0xed/0x180
      	 ? __handle_mm_fault+0x8e7/0xfb0
      	 ? _raw_spin_unlock+0x24/0x30
      	 ? __handle_mm_fault+0x8e7/0xfb0
      	 ? do_vfs_ioctl+0xa5/0x6e0
      	 ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
      	 do_vfs_ioctl+0xa5/0x6e0
      	 ? entry_SYSCALL_64_after_hwframe+0x3e/0xbe
      	 ksys_ioctl+0x3a/0x70
      	 __x64_sys_ioctl+0x16/0x20
      	 do_syscall_64+0x60/0x1b0
      	 entry_SYSCALL_64_after_hwframe+0x49/0xbe
      
      This happens because during page writeback it's valid for
      writepage_delalloc to instantiate a delalloc range which doesn't belong
      to the page currently being written back.
      
      The reason this case is valid is due to find_lock_delalloc_range
      returning any available range after the passed delalloc_start and
      ignoring whether the page under writeback is within that range.
      
      In turn ordered extents (OE) are always created for the returned range
      from find_lock_delalloc_range. If, however, a failure occurs while OE
      are being created then the clean up code in btrfs_cleanup_ordered_extents
      will be called.
      
      Unfortunately the code in btrfs_cleanup_ordered_extents doesn't consider
      the case of such 'foreign' range being processed and instead it always
      assumes that the range OE are created for belongs to the page. This
      leads to the first page of such foregin range to not be cleaned up since
      it's deliberately missed and skipped by the current cleaning up code.
      
      Fix this by correctly checking whether the current page belongs to the
      range being instantiated and if so adjsut the range parameters passed
      for cleaning up. If it doesn't, then just clean the whole OE range
      directly.
      
      Fixes: 52427260 ("btrfs: Handle delalloc error correctly to avoid ordered extent hang")
      CC: stable@vger.kernel.org # 4.14+
      Reviewed-by: default avatarJosef Bacik <josef@toxicpanda.com>
      Signed-off-by: default avatarNikolay Borisov <nborisov@suse.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      eb124aaa
    • Nikolay Borisov's avatar
      btrfs: Remove extent_io_ops::fill_delalloc · 1669d1d2
      Nikolay Borisov authored
      [ Upstream commit 5eaad97a ]
      
      This callback is called only from writepage_delalloc which in turn is
      guaranteed to be called from the data page writeout path. In the end
      there is no reason to have the call to this function to be indrected via
      the extent_io_ops structure. This patch removes the callback definition,
      exports the function and calls it directly. No functional changes.
      Reviewed-by: default avatarJosef Bacik <josef@toxicpanda.com>
      Signed-off-by: default avatarNikolay Borisov <nborisov@suse.com>
      Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
      [ rename to btrfs_run_delalloc_range ]
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      1669d1d2
    • Filipe Manana's avatar
      Btrfs: fix deadlock with memory reclaim during scrub · 338a528b
      Filipe Manana authored
      [ Upstream commit a5fb1142 ]
      
      When a transaction commit starts, it attempts to pause scrub and it blocks
      until the scrub is paused. So while the transaction is blocked waiting for
      scrub to pause, we can not do memory allocation with GFP_KERNEL from scrub,
      otherwise we risk getting into a deadlock with reclaim.
      
      Checking for scrub pause requests is done early at the beginning of the
      while loop of scrub_stripe() and later in the loop, scrub_extent() and
      scrub_raid56_parity() are called, which in turn call scrub_pages() and
      scrub_pages_for_parity() respectively. These last two functions do memory
      allocations using GFP_KERNEL. Same problem could happen while scrubbing
      the super blocks, since it calls scrub_pages().
      
      We also can not have any of the worker tasks, created by the scrub task,
      doing GFP_KERNEL allocations, because before pausing, the scrub task waits
      for all the worker tasks to complete (also done at scrub_stripe()).
      
      So make sure GFP_NOFS is used for the memory allocations because at any
      time a scrub pause request can happen from another task that started to
      commit a transaction.
      
      Fixes: 58c4e173 ("btrfs: scrub: use GFP_KERNEL on the submission path")
      CC: stable@vger.kernel.org # 4.6+
      Reviewed-by: default avatarNikolay Borisov <nborisov@suse.com>
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      338a528b
    • Omar Sandoval's avatar
      Btrfs: clean up scrub is_dev_replace parameter · fac80347
      Omar Sandoval authored
      [ Upstream commit 32934280 ]
      
      struct scrub_ctx has an ->is_dev_replace member, so there's no point in
      passing around is_dev_replace where sctx is available.
      Signed-off-by: default avatarOmar Sandoval <osandov@fb.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      fac80347
    • Paul Mackerras's avatar
      KVM: PPC: Book3S HV: Fix race between kvm_unmap_hva_range and MMU mode switch · d3984e80
      Paul Mackerras authored
      [ Upstream commit 234ff0b7 ]
      
      Testing has revealed an occasional crash which appears to be caused
      by a race between kvmppc_switch_mmu_to_hpt and kvm_unmap_hva_range_hv.
      The symptom is a NULL pointer dereference in __find_linux_pte() called
      from kvm_unmap_radix() with kvm->arch.pgtable == NULL.
      
      Looking at kvmppc_switch_mmu_to_hpt(), it does indeed clear
      kvm->arch.pgtable (via kvmppc_free_radix()) before setting
      kvm->arch.radix to NULL, and there is nothing to prevent
      kvm_unmap_hva_range_hv() or the other MMU callback functions from
      being called concurrently with kvmppc_switch_mmu_to_hpt() or
      kvmppc_switch_mmu_to_radix().
      
      This patch therefore adds calls to spin_lock/unlock on the kvm->mmu_lock
      around the assignments to kvm->arch.radix, and makes sure that the
      partition-scoped radix tree or HPT is only freed after changing
      kvm->arch.radix.
      
      This also takes the kvm->mmu_lock in kvmppc_rmap_reset() to make sure
      that the clearing of each rmap array (one per memslot) doesn't happen
      concurrently with use of the array in the kvm_unmap_hva_range_hv()
      or the other MMU callbacks.
      
      Fixes: 18c3640c ("KVM: PPC: Book3S HV: Add infrastructure for running HPT guests on radix host")
      Cc: stable@vger.kernel.org # v4.15+
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      d3984e80
    • Chris Wilson's avatar
      drm/i915: Cleanup gt powerstate from gem · d88b01d0
      Chris Wilson authored
      [ Upstream commit 30b71084 ]
      
      Since the gt powerstate is allocated by i915_gem_init, clean it from
      i915_gem_fini for symmetry and to correct the imbalance on error.
      Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
      Reviewed-by: default avatarMika Kuoppala <mika.kuoppala@linux.intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20180812223642.24865-1-chris@chris-wilson.co.ukSigned-off-by: default avatarSasha Levin <sashal@kernel.org>
      d88b01d0
    • Chris Wilson's avatar
      drm/i915: Restore sane defaults for KMS on GEM error load · b185bde5
      Chris Wilson authored
      [ Upstream commit 7ed43df7 ]
      
      If we fail during GEM initialisation, we scrub the HW state by
      performing a device level GPU resuet. However, we want to leave the
      system in a usable state (with functioning KMS but no GEM) so after
      scrubbing the HW state, we need to restore some sane defaults and
      re-enable the low-level common parts of the GPU (such as the GMCH).
      
      v2: Restore GTT entries.
      Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
      Link: https://patchwork.freedesktop.org/patch/msgid/20180726085033.4044-2-chris@chris-wilson.co.ukReviewed-by: default avatarMichał Winiarski <michal.winiarski@intel.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      b185bde5
    • Hans Verkuil's avatar
      media: vim2m: use cancel_delayed_work_sync instead of flush_schedule_work · f9994851
      Hans Verkuil authored
      [ Upstream commit 52117be6 ]
      
      The use of flush_schedule_work() made no sense and caused a syzkaller error.
      Replace with the correct cancel_delayed_work_sync().
      Signed-off-by: default avatarHans Verkuil <hverkuil-cisco@xs4all.nl>
      Reported-by: syzbot+69780d144754b8071f4b@syzkaller.appspotmail.com
      Cc: <stable@vger.kernel.org>      # for v4.20 and up
      Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+samsung@kernel.org>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      f9994851
    • Hans Verkuil's avatar
      media: vim2m: use workqueue · a7b6f95f
      Hans Verkuil authored
      [ Upstream commit 144bd0ee ]
      
      v4l2_ctrl uses mutexes, so we can't setup a ctrl_handler in
      interrupt context. Switch to a workqueue instead and drop the timer.
      Signed-off-by: default avatarHans Verkuil <hans.verkuil@cisco.com>
      Reviewed-by: default avatarMauro Carvalho Chehab <mchehab+samsung@kernel.org>
      Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+samsung@kernel.org>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      a7b6f95f
    • Harald Freudenberger's avatar
      s390/zcrypt: reinit ap queue state machine during device probe · e432a58d
      Harald Freudenberger authored
      [ Upstream commit 104f708f ]
      
      Until the vfio-ap driver came into live there was a well known
      agreement about the way how ap devices are initialized and their
      states when the driver's probe function is called.
      
      However, the vfio device driver when receiving an ap queue device does
      additional resets thereby removing the registration for interrupts for
      the ap device done by the ap bus core code. So when later the vfio
      driver releases the device and one of the default zcrypt drivers takes
      care of the device the interrupt registration needs to get
      renewed. The current code does no renew and result is that requests
      send into such a queue will never see a reply processed - the
      application hangs.
      
      This patch adds a function which resets the aq queue state machine for
      the ap queue device and triggers the walk through the initial states
      (which are reset and registration for interrupts). This function is
      now called before the driver's probe function is invoked.
      
      When the association between driver and device is released, the
      driver's remove function is called. The current implementation calls a
      ap queue function ap_queue_remove(). This invokation has been moved to
      the ap bus function to make the probe / remove pair for ap bus and
      drivers more symmetric.
      
      Fixes: 7e0bdbe5 ("s390/zcrypt: AP bus support for alternate driver(s)")
      Cc: stable@vger.kernel.org # 4.19+
      Signed-off-by: default avatarHarald Freudenberger <freude@linux.ibm.com>
      Reviewd-by: default avatarTony Krowiak <akrowiak@linux.ibm.com>
      Reviewd-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
      Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      e432a58d
    • Bartosz Golaszewski's avatar
      ARM: davinci: dm644x: define gpio interrupts as separate resources · a4f404af
      Bartosz Golaszewski authored
      [ Upstream commit adcf60ce ]
      
      Since commit eb3744a2 ("gpio: davinci: Do not assume continuous
      IRQ numbering") the davinci GPIO driver fails to probe if we boot
      in legacy mode from any of the board files. Since the driver now
      expects every interrupt to be defined as a separate resource, split
      the definition of IRQ resources instead of having a single continuous
      interrupt range.
      
      Fixes: eb3744a2 ("gpio: davinci: Do not assume continuous IRQ numbering")
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarBartosz Golaszewski <bgolaszewski@baylibre.com>
      Signed-off-by: default avatarSekhar Nori <nsekhar@ti.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      a4f404af
    • Bartosz Golaszewski's avatar
      ARM: davinci: dm355: define gpio interrupts as separate resources · 8d6b2b24
      Bartosz Golaszewski authored
      [ Upstream commit 27db7baa ]
      
      Since commit eb3744a2 ("gpio: davinci: Do not assume continuous
      IRQ numbering") the davinci GPIO driver fails to probe if we boot
      in legacy mode from any of the board files. Since the driver now
      expects every interrupt to be defined as a separate resource, split
      the definition of IRQ resources instead of having a single continuous
      interrupt range.
      
      Fixes: eb3744a2 ("gpio: davinci: Do not assume continuous IRQ numbering")
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarBartosz Golaszewski <bgolaszewski@baylibre.com>
      Signed-off-by: default avatarSekhar Nori <nsekhar@ti.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      8d6b2b24
    • Bartosz Golaszewski's avatar
      ARM: davinci: dm646x: define gpio interrupts as separate resources · d31f2b61
      Bartosz Golaszewski authored
      [ Upstream commit 2c9c8349 ]
      
      Since commit eb3744a2 ("gpio: davinci: Do not assume continuous
      IRQ numbering") the davinci GPIO driver fails to probe if we boot
      in legacy mode from any of the board files. Since the driver now
      expects every interrupt to be defined as a separate resource, split
      the definition of IRQ resources instead of having a single continuous
      interrupt range.
      
      Fixes: eb3744a2 ("gpio: davinci: Do not assume continuous IRQ numbering")
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarBartosz Golaszewski <bgolaszewski@baylibre.com>
      Signed-off-by: default avatarSekhar Nori <nsekhar@ti.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      d31f2b61
    • Bartosz Golaszewski's avatar
      ARM: davinci: dm365: define gpio interrupts as separate resources · 4883e9e6
      Bartosz Golaszewski authored
      [ Upstream commit 193c0437 ]
      
      Since commit eb3744a2 ("gpio: davinci: Do not assume continuous
      IRQ numbering") the davinci GPIO driver fails to probe if we boot
      in legacy mode from any of the board files. Since the driver now
      expects every interrupt to be defined as a separate resource, split
      the definition of IRQ resources instead of having a single continuous
      interrupt range.
      
      Fixes: eb3744a2 ("gpio: davinci: Do not assume continuous IRQ numbering")
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarBartosz Golaszewski <bgolaszewski@baylibre.com>
      Signed-off-by: default avatarSekhar Nori <nsekhar@ti.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      4883e9e6
    • Bartosz Golaszewski's avatar
      ARM: davinci: da8xx: define gpio interrupts as separate resources · 0a6c3bda
      Bartosz Golaszewski authored
      [ Upstream commit 58a0afbf ]
      
      Since commit eb3744a2 ("gpio: davinci: Do not assume continuous
      IRQ numbering") the davinci GPIO driver fails to probe if we boot
      in legacy mode from any of the board files. Since the driver now
      expects every interrupt to be defined as a separate resource, split
      the definition of IRQ resources instead of having a single continuous
      interrupt range.
      
      Fixes: eb3744a2 ("gpio: davinci: Do not assume continuous IRQ numbering")
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarBartosz Golaszewski <bgolaszewski@baylibre.com>
      Signed-off-by: default avatarSekhar Nori <nsekhar@ti.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      0a6c3bda
    • Lyude Paul's avatar
      drm/amd/dm: Understand why attaching path/tile properties are needed · 016218ef
      Lyude Paul authored
      [ Upstream commit 04ac4b0e ]
      
      Path property is used for userspace to know what MST connector goes to what actual DRM DisplayPort connector, the tiling property is for tiling configurations. Not sure what else there is to figure out.
      Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
      Reviewed-by: default avatarJerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
      Cc: Stable <stable@vger.kernel.org>
      Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      016218ef
    • Rex Zhu's avatar
      drm/amd/pp: Fix truncated clock value when set watermark · 853dc075
      Rex Zhu authored
      [ Upstream commit 4d454e9f ]
      
      the clk value should be tranferred to MHz first and
      then transfer to uint16. otherwise, the clock value
      will be truncated.
      Reviewed-by: default avatarAlex Deucher <alexander.deucher@amd.com>
      Reported-by: default avatarHersen Wu <hersenxs.wu@amd.com>
      Signed-off-by: default avatarRex Zhu <Rex.Zhu@amd.com>
      Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      853dc075
    • David Francis's avatar
      powerplay: Respect units on max dcfclk watermark · 5faabd22
      David Francis authored
      [ Upstream commit f191415b ]
      
      In a refactor, the watermark clock inputs to
      powerplay from DC were changed from units of 10kHz to
      kHz clocks.
      
      One division by 100 was not converted into a division
      by 1000.
      Signed-off-by: default avatarDavid Francis <David.Francis@amd.com>
      Reviewed-by: default avatarHarry Wentland <harry.wentland@amd.com>
      Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      5faabd22
    • Dexuan Cui's avatar
      Drivers: hv: kvp: Fix the recent regression caused by incorrect clean-up · 11bedb2e
      Dexuan Cui authored
      [ Upstream commit e670de54 ]
      
      In kvp_send_key(), we do need call process_ib_ipinfo() if
      message->kvp_hdr.operation is KVP_OP_GET_IP_INFO, because it turns out
      the userland hv_kvp_daemon needs the info of operation, adapter_id and
      addr_family. With the incorrect fc62c3b1, the host can't get the
      VM's IP via KVP.
      
      And, fc62c3b1 added a "break;", but actually forgot to initialize
      the key_size/value in the case of KVP_OP_SET, so the default key_size of
      0 is passed to the kvp daemon, and the pool files
      /var/lib/hyperv/.kvp_pool_* can't be updated.
      
      This patch effectively rolls back the previous fc62c3b1, and
      correctly fixes the "this statement may fall through" warnings.
      
      This patch is tested on WS 2012 R2 and 2016.
      
      Fixes: fc62c3b1 ("Drivers: hv: kvp: Fix two "this statement may fall through" warnings")
      Signed-off-by: default avatarDexuan Cui <decui@microsoft.com>
      Cc: K. Y. Srinivasan <kys@microsoft.com>
      Cc: Stephen Hemminger <sthemmin@microsoft.com>
      Signed-off-by: default avatarHaiyang Zhang <haiyangz@microsoft.com>
      Cc: <Stable@vger.kernel.org>
      Signed-off-by: default avatarK. Y. Srinivasan <kys@microsoft.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      11bedb2e