- 23 Jul, 2020 9 commits
-
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200713104453.33414-1-grandmaster@al2klimov.deSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: -
Randy Dunlap authored
Drop the repeated word "the" in a comment. Cc: Arve Hjønnevåg <arve@android.com> Cc: Todd Kjos <tkjos@android.com> Cc: Martijn Coenen <maco@android.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Hridya Valsaraju <hridya@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: devel@driverdev.osuosl.org Acked-by:
Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20200719002738.20210-1-rdunlap@infradead.orgSigned-off-by:
-
Randy Dunlap authored
Drop the repeated word "the" in a comment. Signed-off-by:
-
Gustavo A. R. Silva authored
One-element arrays are being deprecated[1]. Replace the one-element arrays with a simple value type u8 reserved, once this is just a placeholder for alignment. Also, while there, use the preferred form for passing a size of a struct. The alternative form where struct name is spelled out hurts readability and introduces an opportunity for a bug when the variable type is changed but the corresponding sizeof that is passed as argument is not. [1] https://github.com/KSPP/linux/issues/79Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200714214516.GA1040@embeddedorSigned-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200717185925.84102-1-grandmaster@al2klimov.deSigned-off-by:
-
Gustavo A. R. Silva authored
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Also, make use of the array_size() helper instead of the open-coded version in memcpy(). These sorts of multiplication factors need to be wrapped in array_size(). And while there, use the preferred form for passing a size of a struct. The alternative form where struct name is spelled out hurts readability and introduces an opportunity for a bug when the pointer variable type is changed but the corresponding sizeof that is passed as argument is not. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://github.com/KSPP/linux/issues/79Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'fpga-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next Moritz writes: FPGA Manager changes for 5.9-rc1 Here is the (slightly larger than usual) patch set for the 5.9-rc1 merge window. DFL: - Xu's changes add support for AFU interrupt handling and puts them to use for error handling. - Xu's other change also adds another device-id for the Intel FPGA PAC N3000. - John's change converts from using get_user_pages() to pin_user_pages(). - Gustavo's patch cleans up some of the allocation by using struct_size(). Xilinx: - Luca's changes clean up the xilinx-spi and xilinx-slave-serial drivers and updates the comments and dt-bindings to reflect the fact it also supports 7 series devices. Core: - Tom cleaned up the fpga-bridge / fpga-mgr core by removing some dead-stores. All patches have been reviewed on the mailing list, and have been in the last few linux-next releases (as part of my for-next branch) without issues. Signed-off-by:
Moritz Fischer <mdf@kernel.org> * tag 'fpga-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga: fpga: dfl: pci: add device id for Intel FPGA PAC N3000 Documentation: fpga: dfl: add descriptions for interrupt related interfaces. fpga: dfl: afu: add AFU interrupt support fpga: dfl: fme: add interrupt support for global error reporting fpga: dfl: afu: add interrupt support for port error reporting fpga: dfl: introduce interrupt trigger setting API fpga: dfl: pci: add irq info for feature devices enumeration fpga: dfl: parse interrupt info for feature devices on enumeration fpga manager: xilinx-spi: check INIT_B pin during write_init dt-bindings: fpga: xilinx-slave-serial: add optional INIT_B GPIO fpga: Fix dead store in fpga-bridge.c fpga: Fix dead store fpga-mgr.c fpga: dfl: Use struct_size() in kzalloc() fpga manager: xilinx-spi: remove unneeded, mistyped variables fpga manager: xilinx-spi: valid for the 7 Series too dt-bindings: fpga: xilinx-slave-serial: valid for the 7 Series too fpga: dfl: afu: convert get_user_pages() --> pin_user_pages()
-
Greg Kroah-Hartman authored
Merge tag 'soundwire-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next Vinod writes: soundwire updates for 5.9-rc1 This contains few core changes and bunch of Intel driver updates: - Adds definitions for 1.2 spec - Sanyog left as a MAINTAINER and Bard took his place while Sanyog is a reviewer now. - Intel: Lots of updates to stream/dai handling, wake support and link synchronization. * tag 'soundwire-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (31 commits) Soundwire: intel_init: save Slave(s) _ADR info in sdw_intel_ctx soundwire: intel: add wake interrupt support soundwire: intel/cadence: merge Soundwire interrupt handlers/threads soundwire: intel_init: use EXPORT_SYMBOL_NS soundwire: intel_init: add implementation of sdw_intel_enable_irq() soundwire: intel: introduce helper for link synchronization soundwire: intel: introduce a helper to arm link synchronization soundwire: intel: revisit SHIM programming sequences. soundwire: intel: reuse code for wait loops to set/clear bits soundwire: fix the kernel-doc comment soundwire: sdw.h: fix indentation soundwire: sdw.h: fix PRBS/Static_1 swapped definitions soundwire: intel: don't free dma_data in DAI shutdown soundwire: cadence: allocate/free dma_data in set_sdw_stream soundwire: intel: remove stream allocation/free soundwire: stream: add helper to startup/shutdown streams soundwire: intel: implement get_sdw_stream() operations MAINTAINERS: change SoundWire maintainer soundwire: bus: initialize bus clock base and scale registers soundwire: extend SDW_SLAVE_ENTRY ...
-
- 22 Jul, 2020 5 commits
-
-
Bjorn Helgaas authored
When reading registers defined by the PCIe spec, use the names already defined by the PCI core. This makes maintenance of the PCI core and drivers easier. No functional change intended. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200721212336.1159079-6-helgaas@kernel.org [ additional replacements due to changes in my tree - gregkh ] Signed-off-by:
-
Bjorn Helgaas authored
Instead of hard-coding the location of the L1 PM Substates capability based on the Device ID, search for it in the extended capabilities list. This works for any device, as long as it implements the L1 PM Substates capability correctly, so it doesn't require maintenance as new devices are added. No functional change intended. Signed-off-by:
-
Bjorn Helgaas authored
rtsx_pci_read_config_dword() and similar wrappers around the PCI config accessors add very little value, and they obscure the fact that often we are accessing standard PCI registers that should be coordinated with the PCI core. Remove the wrappers and use the PCI config accessors directly. No functional change intended. Signed-off-by:
-
Bjorn Helgaas authored
There are no more uses of struct rtsx_pcr.pcie_cap. Remove it. Signed-off-by:
-
Bjorn Helgaas authored
Instead of using the driver-specific rtsx_pci_write_config_byte() to update the PCIe Link Control Register, use pcie_capability_write_word() like the rest of the kernel does. This makes it easier to maintain ASPM across the PCI core and drivers. No functional change intended. I missed this when doing 3d1e7aa8 ("misc: rtsx: Use pcie_capability_clear_and_set_word() for PCI_EXP_LNKCTL"). Signed-off-by:
-
- 21 Jul, 2020 26 commits
-
-
Suzuki K Poulose authored
The ETM state save/restore incorrectly reads/writes some of the 64bit registers (e.g, address comparators, vmid/cid comparators etc.) using 32bit accesses. Ensure we use the appropriate width accessors for the registers. Fixes: f188b5e7 ("coresight: etm4x: Save/restore state across CPU low power states") Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200716175746.3338735-18-mathieu.poirier@linaro.orgSigned-off-by:
-
Mike Leach authored
Add default sink selection to the perf trace handling in the etm driver. Uses the select default sink infrastructure to select a sink for the perf session, if no other sink is specified. Signed-off-by:
Mike Leach <mike.leach@linaro.org> Reviewed-by:
-
Mike Leach authored
An additional sink subtype is added to differentiate ETB/ETF buffer sinks and ETR type system memory sinks. This allows the prioritised selection of default sinks. Signed-off-by:
-
Mike Leach authored
Adds a method to select a suitable sink connected to a given source. In cases where no sink is defined, the coresight_find_default_sink routine can search from a given source, through the child connections until a suitable sink is found. The suitability is defined in by the sink coresight_dev_subtype on the CoreSight device, and the distance from the source by counting connections. Higher value subtype is preferred - where these are equal, shorter distance from source is used as a tie-break. This allows for default sink to be discovered were none is specified (e.g. perf command line) Signed-off-by:
Leo Yan <leo.yan@linaro.org> Reviewed-by:
-
Sai Prakash Ranjan authored
Reading TMC mode register without proper coresight power management can lead to exceptions like the one in the call trace below in tmc_read_unprepare_etb() when the trace data is read after the sink is disabled. So fix this by having a check for coresight sysfs mode before reading TMC mode management register in tmc_read_unprepare_etb() similar to tmc_read_prepare_etb(). SError Interrupt on CPU6, code 0xbe000411 -- SError pstate: 80400089 (Nzcv daIf +PAN -UAO) pc : tmc_read_unprepare_etb+0x74/0x108 lr : tmc_read_unprepare_etb+0x54/0x108 sp : ffffff80d9507c30 x29: ffffff80d9507c30 x28: ffffff80b3569a0c x27: 0000000000000000 x26: 00000000000a0001 x25: ffffff80cbae9550 x24: 0000000000000010 x23: ffffffd07296b0f0 x22: ffffffd0109ee028 x21: 0000000000000000 x20: ffffff80d19e70e0 x19: ffffff80d19e7080 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: dfffffd000000001 x9 : 0000000000000000 x8 : 0000000000000002 x7 : ffffffd071d0fe78 x6 : 0000000000000000 x5 : 0000000000000080 x4 : 0000000000000001 x3 : ffffffd071d0fe98 x2 : 0000000000000000 x1 : 0000000000000004 x0 : 0000000000000001 Kernel panic - not syncing: Asynchronous SError Interrupt Fixes: 4525412a ("coresight: tmc: making prepare/unprepare functions generic") Reported-by:
Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Tested-by:
-
Sai Prakash Ranjan authored
Implement a shutdown callback to ensure ETR hardware is properly shutdown in reboot/shutdown path. This is required for ETR which has SMMU address translation enabled like on SC7180 SoC and few others. If the hardware is still accessing memory after SMMU translation is disabled as part of SMMU shutdown callback in system reboot or shutdown path, then IOVAs(I/O virtual address) which it was using will go on the bus as the physical addresses which might result in unknown crashes (NoC/interconnect errors). So we make sure from this shutdown callback that the ETR is shutdown before SMMU translation is disabled and device_link in SMMU driver will take care of ordering of shutdown callbacks such that SMMU shutdown callback is not called before any of its consumer shutdown callbacks. Signed-off-by:
-
Mike Leach authored
Comment for an elemnt in the coresight_device structure appears to have been corrupted and makes no sense. Fix this before making further changes. Signed-off-by:
-
Mike Leach authored
The counter value registers change during operation, however this change is not reflected in the values seen by the user in sysfs. This fixes the issue by reading back the values on disable. Signed-off-by:
-
Mike Leach authored
ETMv4 max resource selector constant incorrectly set to 16. Updated to the correct 32 value, and adjustments made to limited code using it. Signed-off-by:
-
Andy Shevchenko authored
acpi_dev_get_resources() does perform the NULL pointer check against ACPI companion device which is given as function parameter. Thus, there is no need to duplicate this check in the caller. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Xu Wang authored
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kcalloc". Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Signed-off-by:
-
Sai Prakash Ranjan authored
Add an optional boolean property "qcom,replicator-loses-context" to identify replicators which loses context when AMBA clocks are removed in certain configurable replicator designs. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Sai Prakash Ranjan authored
On some QCOM SoCs, replicators in Always-On domain loses its context as soon as the clock is disabled. Currently as a part of pm_runtime workqueue, clock is disabled after the replicator is initialized by amba_pm_runtime_suspend assuming that context is not lost which is not true for replicators with such limitations. So add a new property "qcom,replicator-loses-context" to identify such replicators and reset them. Suggested-by:
-
Tingwei Zhang authored
Add "qcom,skip-power-up" property to identify systems which can skip powering up of trace unit since they share the same power domain as their CPU core. This is required to identify such systems with hardware errata which stops the CPU watchdog counter when the power up bit is set (TRCPDCR.PU). Signed-off-by:
Tingwei Zhang <tingwei@codeaurora.org> Co-developed-by:
-
Tingwei Zhang authored
On some Qualcomm Technologies Inc. SoCs like SC7180, there exists a hardware errata where the APSS (Application Processor SubSystem)/CPU watchdog counter is stopped when the trace unit power up ETM register is set (TRCPDCR.PU = 1). Since the ETMs share the same power domain as that of respective CPU cores, they are powered on when the CPU core is powered on. So we can skip powering up of trace unit after checking for this errata via new property called "qcom,skip-power-up". Signed-off-by:
-
Sai Prakash Ranjan authored
Use CS_AMBA_ID macro for coresight catu AMBA id table instead of open coding. Signed-off-by:
-
Sai Prakash Ranjan authored
Use CS_AMBA_ID macro for dynamic replicator AMBA id table instead of open coding. Signed-off-by:
-
Bard Liao authored
Save ACPI information in context so that we can match machine driver with sdw _ADR matching tables. Suggested-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200716150947.22119-10-yung-chuan.liao@linux.intel.comSigned-off-by:
Vinod Koul <vkoul@kernel.org>
-
Rander Wang authored
When system is suspended in clock stop mode on intel platforms, both master and slave are in clock stop mode and soundwire bus is taken over by a glue hardware. The bus message for jack event is processed by this glue hardware, which will trigger an interrupt to resume audio pci device. Then audio pci driver will resume soundwire master and slave, transfer bus ownership to master, finally slave will report jack event to master and codec driver is triggered to check jack status. if a slave has been attached to a bus, the slave->dev_num_sticky should be non-zero, so we can check this value to skip the ghost devices defined in ACPI table but not populated in hardware. Signed-off-by:
Rander Wang <rander.wang@intel.com> Signed-off-by:
-
Bard Liao authored
The existing code uses one pair of interrupt handler/thread per link but at the hardware level the interrupt is shared. This works fine for legacy PCI interrupts, but leads to timeouts in MSI (Message-Signaled Interrupt) mode, likely due to edges being lost. This patch unifies interrupt handling for all links. The dedicated handler is removed since we use a common one for all shared interrupt sources, and the thread function takes care of dealing with interrupt sources. This partition follows the model used for the SOF IPC on HDaudio platforms, where similar timeout issues were noticed and doing all the interrupt handling/clearing in the thread improved reliability/stability. Validation results with 4 links active in parallel show a night-and-day improvement with no timeouts noticed even during stress tests. Latency and quality of service are not affected by the change - mostly because events on a SoundWire link are throttled by the bus frame rate (typically 8..48kHz). Signed-off-by:
-
Pierre-Louis Bossart authored
Make sure all symbols in this soundwire-intel-init module are exported with a namespace. The MODULE_IMPORT_NS will be used in Intel/SOF HDaudio modules to be posted in a separate series. Namespaces are only introduced for the Intel parts of the SoundWire code at this time, in future patches we should also add namespaces for Cadence parts and the SoundWire core. Suggested-by:
-
Pierre-Louis Bossart authored
This function is required to enable all interrupts across all links. Signed-off-by:
-
Pierre-Louis Bossart authored
After arming the synchronization, the SYNCGO field controls the hardware-based synchronization between links. Move the programming and wait for clear of SYNCGO to dedicated helper. Signed-off-by:
-
Pierre-Louis Bossart authored
Move code from pre_bank_switch to dedicated helper, will be used in follow-up patches as recommended by programming flows. Signed-off-by:
-
Pierre-Louis Bossart authored
Somehow the existing code is not aligned with the steps described in the documentation, refactor code and make sure the register programming sequences are correct. Also add missing power-up, power-down and wake capabilities (the last two are used in follow-up patches but introduced here for consistency). Some of the SHIM registers exposed fields that are link specific, and in addition some of the power-related registers (SPA/CPA) take time to be updated. Uncontrolled access leads to timeouts or errors. Add a mutex, shared by all links, so that all accesses to such registers are serialized, and follow a pattern of read-modify-write. This includes making sure SHIM_SYNC is programmed only once, before the first master is powered on. We use a 'shim_mask' field, shared between all links and protected by a mutex, to deal with power-up and power-down sequences. Note that the SYNCPRD value is tied only to the XTAL value and not the current bus frequency or the frame rate. BugLink: https://github.com/thesofproject/linux/issues/1555Signed-off-by:
-
Pierre-Louis Bossart authored
Refactor code and use same routines on set/clear Signed-off-by:
-
