Revise variable names and comments in
cs35l35 and cs35l36 amp drivers.
Signed-off-by: David Rhodes <drhodes@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Message-Id: <20210525194439.2232908-1-drhodes@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Use DEVICE_ATTR_RO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Message-Id: <20210524114017.18672-1-yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Use DEVICE_ATTR_WO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Message-Id: <20210524114753.39544-1-yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Use DEVICE_ATTR_WO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Message-Id: <20210524114503.26460-1-yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The sparse tool complains as follows:

sound/soc/fsl/imx-card.c:121:27: warning:
 symbol 'ak4458_fs_mul' was not declared. Should it be static?
sound/soc/fsl/imx-card.c:138:31: warning:
 symbol 'ak4458_tdm_fs_mul' was not declared. Should it be static?
sound/soc/fsl/imx-card.c:149:27: warning:
 symbol 'ak4497_fs_mul' was not declared. Should it be static?
sound/soc/fsl/imx-card.c:166:27: warning:
 symbol 'ak5558_fs_mul' was not declared. Should it be static?
sound/soc/fsl/imx-card.c:180:31: warning:
 symbol 'ak5558_tdm_fs_mul' was not declared. Should it be static?

Those symbols are not used outside of imx-card.c, so marks
them static.

Fixes: aa736700 ("ASoC: imx-card: Add imx-card machine driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Message-Id: <20210524133553.2366502-1-weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>

Use DEVICE_ATTR_RW() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Message-Id: <20210524115131.46288-1-yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>

Jack must be connected before reporting button events and
if the jack is disconnected button release must be reported
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-Id: <20210525090822.64577-4-tanureal@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>

Add support for 2.4MHz clock source
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-Id: <20210525090822.64577-3-tanureal@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>

Add support for 24bits, 2 channels, 48k Sample rate bit clock
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-Id: <20210525090822.64577-2-tanureal@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>

The 16 Bits, 2 channels, 48K sample rate use case needs
to configure a safer pll_divout during the start of PLL
After 800us from the start of PLL the correct pll_divout
can be set
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Message-Id: <20210525090822.64577-1-tanureal@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@sirena.org.uk>

Merge branch 'for-5.13' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.14

Merge series "ASoC: rsnd: add D3 support" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:

Hi Mark, Rob

These adds R-Car D3 support for rsnd driver.
[1/3] is tidyup patch for dt-bindings (not only for D3).
[2/3], [3/3] are for R-Car D3.

Kuninori Morimoto (3):
  ASoC: dt-bindings: renesas: rsnd: tidyup properties
  ASoC: rsnd: tidyup loop on rsnd_adg_clk_query()
  ASoC: rsnd: add null CLOCKIN support

 .../bindings/sound/renesas,rsnd.yaml          | 10 ++++-
 sound/soc/sh/rcar/adg.c                       | 37 ++++++++++++++++---
 2 files changed, 41 insertions(+), 6 deletions(-)

--
2.25.1

NXP's TFA98xx (now part of Goodix) are fairly popular speaker amplifiers
used in many smartphones and tablets. Most of them are sold as "smart
amplifiers" with built-in "CoolFlux DSP" that is used for volume control,
plus a "sophisticated speaker-boost and protection algorithm".

Unfortunately, they are also almost entirely undocumented. The short
datasheets (e.g. [1] for TFA9897) describe the available features,
but do not provide any information about the registers or how to use
the "CoolFlux DSP".

The amplifiers are most often configured through proprietary userspace
libraries. There are also some (rather complex) kernel drivers (e.g. [2])
but even those rely on obscure firmware blobs for configuration (so-called
"containers"). They seem to contain different "profiles" with tuned speaker
settings, sample rates and volume steps (which would be better exposed
as separate ALSA mixers).

The format of the firmware files seems to have changed a lot over the time,
so it's not even possible to simply re-use the firmware originally provided
by the vendor.

Overall, it seems close to impossible to develop a proper mainline driver
for these amplifiers that could make proper use of the built-in DSP.

This commit implements a compromise: At least the TFA1 family of the
TFA98xx amplifiers (usually called TFA989x) provide a way to *bypass*
the DSP using a special register sequence. The register sequence can be
found in similar variations in the kernel drivers from lots of vendors
e.g. in [3] and was probably mainly used for factory testing.

With the DSP bypassed, the amplifier acts mostly like a dumb standard
speaker amplifier, without (hardware) volume control. However, the setup
is much simpler and it works without any obscure firmware.

This driver implements the DSP bypass combined with chip-specific
initialization sequences adapted from [2]. Only TFA9895 is supported in
this initial commit. Except for the lack of volume control I can not hear
any difference with or without the DSP, it works just fine.

This driver allows the speaker to work on mainline Linux running on the
Samsung Galaxy A3/A5 (2015) [TFA9895] and Alcatel Idol 3 [TFA9897].
TFA9897 support will be added in separate patch set later.

[1]: https://product.goodix.com/en/docview/TFA9897%20SDS_Rev.3.1?objectId=47&objectType=document&version=78
[2]: https://source.codeaurora.org/external/mas/tfa98xx
[3]: https://github.com/sonyxperiadev/kernel/blob/57b5050e340f40a88e1ddb8d16fd9adb44418923/sound/soc/codecs/tfa98xx.c#L1422-L1462Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210513104129.36583-2-stephan@gerhold.netSigned-off-by: Mark Brown <broonie@kernel.org>

NXP/Goodix TFA989X (TFA1) amplifiers are controlled via an I2C bus.
Add simple device tree bindings that describe how to set them up
in the device tree.

Right now only nxp,tfa9895 is supported but this will be extended
to at least nxp,tfa9897 in the near future.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210513104129.36583-1-stephan@gerhold.netSigned-off-by: Mark Brown <broonie@kernel.org>

Some Renesas SoC doesn't have full CLOCKIN.
This patch add null_clk, and accepts it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tumsoe2p.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

commit 06e8f5c8 ("ASoC: rsnd: don't call clk_get_rate() under
atomic context") used saved clk_rate, thus for_each_rsnd_clk()
is no longer needed. This patch fixes it.

Fixes: 06e8f5c8 ("ASoC: rsnd: don't call clk_get_rate() under atomic context")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v978oe2u.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

1) resets/reset-names needs minItems
2) It can use ports, not only port
3) It is not using audio-graph properties

Without this patch, we will get warnings
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wnrooe2z.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Check the return value of devm_kstrdup() in case of
Null-point-dereference.

Fixes: 45dd9943 ("ASoC: core: remove artificial component and DAI name constraint")
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/r/20210524024941.159952-1-wangkefeng.wang@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Brya is another ADL-P product.

AlderLake has support for Bluetooth audio offload capability.
Enable the BT-offload quirk for ADL-P Brya and the Intel RVP.
Signed-off-by: Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210521155632.3736393-2-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

RT5682 and Max98373 are added with SDW0,SDW2 links respectively.
Signed-off-by: Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210521155632.3736393-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The HDA support can only be compiled when SND_SOC_SOF_PCI is enabled which
depends on CONFIG_PCI.

This makes the IS_ENABLED(CONFIG_PCI) checks redundant in the code, they
will resolve to true all the time.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210521092804.3721324-8-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Sparse throws the following warning:

sound/soc/sof/ops.h:247:17: error: returning void-valued expression

Remove the useless returns.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210521092804.3721324-7-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix sparse warning by using le32_to_cpu.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210521092804.3721324-6-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

SOF core should use the IO functions via callbacks and not directly to
ensure that it remains platform independent.

Fixes: 83ee7ab1 ("ASoC: SOF: Intel: byt: Refactor fw ready / mem windows creation")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210521092804.3721324-5-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Print the register offset out to provide more useful information for the
register polling debugging.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210521092804.3721324-4-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

At the start of the function we already have the desc, no need to cast it
again from pci_id->driver_data to save it to sof_pdata.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210521092804.3721324-3-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

We can check for the desc->ops directly in the probe functions, the ops
is not used directly in the functions.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210521092804.3721324-2-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This driver spits out a warning for me at boot:

 sc7180-lpass-cpu 62f00000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting optional null: -2

but it looks like it is all an optional clk. Use the optional clk APIs
here so that we don't see this message and everything else is the same.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Banajit Goswami <bgoswami@codeaurora.org>
Fixes: 3e53ac82 ("ASoC: qcom: make osr clock optional")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210520014807.3749797-1-swboyd@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add machine driver for i.MX boards, which supports
AK4458/AK5558/AK4497/AK5552 DAC/ADC attached to
SAI interface currently, but these DAC/ADCs are not
only supported codecs. This machine driver is designed
to be a more common machine driver for i.MX platform,
it can support widely cpu dai interface and codec
dai interface.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Mihai Serban <mihai.serban@nxp.com>
Signed-off-by: Cosmin-Gabriel Samoila <cosmin.samoila@nxp.com>
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com>
Link: https://lore.kernel.org/r/1621247488-21412-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Imx-card is a new added machine driver for supporting
ak4458/ak5558/ak5552/ak4497 codec on i.MX platforms. But these
DAC/ADCs are not only supported codecs. This machine driver is
designed to be a more common machine driver for i.MX platform,
it can support widely cpu dai interface and codec dai interface.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1621247488-21412-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

The original patch changed kcontrol_type to a pointer. In some goto
cases the pointer is assigned into a struct member as uninitialized and
this will cause a runtime error with UBSan even if it isn't a real bug.
So initialize the pointer to NULL.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: d29d41e2 ("ASoC: topology: Add support for multiple kcontrol types to a widget")
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210519100713.879958-1-jaska.uimonen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This error path returns zero (success) but it should return -EINVAL.

Fixes: 3333cb71 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/YKXuyGEzhPT35R3G@mwandaSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: meson: g12a-toacodec: add support for SM1" from Neil Armstrong <narmstrong@baylibre.com>:

This patchset adds Amlogic SM1 support on the TOACODEC driver, first by switching
to regmap fields for some bit fields to avoid code duplication, and then by adding
the corresponding bits & struct for the SM1 changed bits.

Changes since v2 at [2]:
- use raw values instead of defines in REG_FIELD() for g12a_toacodec_match_data

Changes since v1 at [1]:
- switch to regmap field

[1] https://lore.kernel.org/r/20210429170147.3615883-1-narmstrong@baylibre.com
[2] https://lore.kernel.org/r/20210505072607.3815442-1-narmstrong@baylibre.com

Neil Armstrong (2):
  ASoC: meson: g12a-toacodec: use regmap fields to prepare SM1 support
  ASoC: meson: g12a-toacodec: add support for SM1 TOACODEC

 sound/soc/meson/g12a-toacodec.c | 143 +++++++++++++++++++++++++++-----
 1 file changed, 124 insertions(+), 19 deletions(-)

--
2.25.1

If fixed hw params won't be used, fixing up isn't needed also.
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/000401d748bc$fa466d50$eed347f0$@samsung.comSigned-off-by: Mark Brown <broonie@kernel.org>

This helps validating DTS files.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210512205926.780-1-zajec5@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

This adds support for the TOACODEC found in Amlogic SM1 SoCs.

The bits are shifted for more selection of clock sources, so this only
maps the same support for G12A to the SM1 bits.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210511074829.4110036-3-narmstrong@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

Switch usage to regmap field for bits handled by the g12a_toacodec_mux_put_enum()
function to avoid uselesss code duplication when adding SM1 variant support.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210511074829.4110036-2-narmstrong@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

BE hw_params op was recently added for SSP type DAIs.
But sending the DAI_CONFIG IPC during hw_params
is not supported with older firmware. So add an ABI check
to avoid sending the IPC if the firmware ABI is older than
3.18.

Fixes: e12be9fb ('ASoC: SOF: Intel: HDA: add hw params callback for SSP DAIs')
Tested-by: Yong Zhi <yong.zhi@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210518174121.151601-1-ranjani.sridharan@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

After calling clk_prepare_enable(), clk_disable_unprepare() need
be called when calling clk_set_rate() failed.

Fixes: 0bf750f4 ("ASoC: hisilicon: Add hi6210 i2s audio driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210518044514.607010-1-yangyingliang@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210514081100.16196-1-yuehaibing@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>