- 01 Sep, 2020 32 commits
-
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Paul Kocialkowski authored
Although the code is correct and doing the right thing, the clock diagram showed the wrong register for the bit divider, which had me doubting the understanding of the tree. Fix this to avoid doubts in the future. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Fixes: aa288248 ("media: ov5640: Adjust the clock based on the expected rate") Acked-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Jordan Hand authored
Fix improper line breaks and format all example yavta and media-ctl commands as code blocks to improve readability. Signed-off-by: Jordan Hand <jorhand@linux.microsoft.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Jacopo Mondi authored
Since the current maintainer email address bounces back, replace the entry and make myself and Dave Stevenson maintainers of the driver. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Jacopo Mondi authored
Document the optional clock-noncontinuous endpoint property that allows enabling MIPI CSI-2 non-continuous clock operations. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Jacopo Mondi authored
Document in dt-schema bindings for the ov5647 sensor the optional 'pwdn-gpios' property. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Jacopo Mondi authored
Convert the ov5647 image sensor bindings to DT schema and add the file entry to MAINTAINERS. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Rahul Gottipati authored
This fixes a multiline comment style warning as found by checkpatch.pl. Signed-off-by: Rahul Gottipati <rahul.blr97@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Bingbu Cao authored
Fix the typo in email address of Tianshu Qiu and correct the name. Reported-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Tianshu Qiu <tian.shu.qiu@intel.com> Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Bingbu Cao authored
The OTP data was not ready after registered as nvmem device, it is risky as the nvmem read may happen once the device exists, this patch get the OTP data ready before registering the nvmem device. OTP data missing should not break the normal camera sensor probe, so use a warning instead of an error message. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Qingwu Zhang <qingwu.zhang@intel.com> Suggested-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Jonathan Bakker authored
The parallel port nodes should be numbered 1 and 2, not 0 and 1 for A and B respectively. The driver has always implemented 1 and 2 and the in-tree Goni DTS uses 1 as port A as well. Update the documentation to match this behaviour. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Jonathan Bakker authored
vidioc_streamoff can be called multiple times from userspace, but we should only call media_pipeline_stop when we're actually setup. This became more noticeable after commit 2a2599c6 ("[media] media: entity: Catch unbalanced media_pipeline_stop calls") was merged as it added a WARN for unbalanced calls to media_pipeline_stop. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Jonathan Bakker authored
This is no longer used since the conversion to DT Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Jonathan Bakker authored
This is a no-op as it is never set and is a remnant from non-DT days that can be safely removed. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Jonathan Bakker authored
On some devices, there may be multiple camera sensors attached to the same port. Make sure we probe all of them, not just the first one. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Jonathan Bakker authored
Instead of keeping a local copy of how many sensors we've probed (which may not even properly represent the number of sensors probed if we have a port without a sensor), use the global num_sensors counter that has the actual number used. This will also make it easier to add support for multiple sensors being connected to the same port. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Jonathan Bakker authored
Commit ee7160e5 ("[media] s5p-fimc: Add support for JPEG capture") added support for JPEG capture, but missed setting a register when the parallel port was used rather than the CSIS device. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Jonathan Bakker authored
Commit bae45003 ("[media] exynos4-is: Add missing entity function initialization") tried to suppress the warnings such as s5p-fimc-md camera: Entity type for entity FIMC.0 was not initialized! However, this missed setting for the subdev. Set it now to avoid the ugly warnings on boot. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Jonathan Bakker authored
Not all devices use the CSIS device, some may use the FIMC directly in which case the CSIS device isn't registered. This leads to a nullptr exception when starting the stream as the CSIS device is always referenced. Instead, if getting the CSIS device fails, try getting the FIMC directly to check if we are using the subdev API Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Tomasz Figa authored
On FIMC variants which don't have writeback channel, there is no need to access system registers. This patch makes the driver request sysreg regmap conditionally depending on whether writeback is supported. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Jonathan Bakker authored
The S5PV210 platform only supports device tree based booting where the FIMC variant data is parsed directly from the device tree, hence the now unused static data can be removed. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Ezequiel Garcia authored
When the post-processor is enabled, the driver allocates "shadow buffers" which are used for the decoder core, and exposes the post-processed buffers to userspace. For this reason, extra motion vector space has to be allocated on the shadow buffers, which the driver wasn't doing. Fix it. This fix should address artifacts on high profile bitstreams. Fixes: 8c2d66b0 ("media: hantro: Support color conversion via post-processing") Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Ezequiel Garcia authored
If the bitstream and the application are incorrectly configuring the reference pictures, the hardware will need to fallback to using some other reference picture. When the post-processor is enabled, the fallback buffer should be a shadow buffer (postproc.dec_q), and not a CAPTURE queue buffer, since the latter is post-processed and not really the output of the decoder core. Fixes: 8c2d66b0 ("media: hantro: Support color conversion via post-processing") Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Julia Lawall authored
list_for_each_entry is able to handle an empty list. The only effect of avoiding the loop is not initializing the index variable. Drop list_empty tests in cases where these variables are not used. Note that list_for_each_entry is defined in terms of list_first_entry, which indicates that it should not be used on an empty list. But in list_for_each_entry, the element obtained by list_first_entry is not really accessed, only the address of its list_head field is compared to the address of the list head, so the list_first_entry is safe. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) <smpl> @@ expression x,e; iterator name list_for_each_entry; statement S; identifier i; @@ -if (!(list_empty(x))) { list_for_each_entry(i,x,...) S - } ... when != i ? i = e </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Julia Lawall authored
list_for_each_safe is able to handle an empty list. The only effect of avoiding the loop is not initializing the index variable. Drop list_empty tests in cases where these variables are not used. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) <smpl> @@ expression x,e; iterator name list_for_each_safe; statement S; identifier i,j; @@ -if (!(list_empty(x))) { list_for_each_safe(i,j,x) S - } ... when != i when != j ( i = e; | ? j = e; ) </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Julia Lawall authored
list_for_each_entry is able to handle an empty list. The only effect of avoiding the loop is not initializing the index variable. Drop list_empty tests in cases where these variables are not used. Note that list_for_each_entry is defined in terms of list_first_entry, which indicates that it should not be used on an empty list. But in list_for_each_entry, the element obtained by list_first_entry is not really accessed, only the address of its list_head field is compared to the address of the list head, so the list_first_entry is safe. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) <smpl> @@ expression x,e; iterator name list_for_each_entry; statement S; identifier i; @@ -if (!(list_empty(x))) { list_for_each_entry(i,x,...) S - } ... when != i ? i = e </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
- 29 Aug, 2020 8 commits
-
-
Gustavo A. R. Silva authored
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Helen Koike authored
The driver access struct's fields one by one, they are not blindly copied to/from the hardware, so we can remove __packed from the structs. Tested on Scarlet Chromebook with ChromeOS stack and verified images with the Camera app. Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dafna Hirschfeld authored
In the irq handler 'rkisp1_params_isr', the lock 'config_lock' should be held as long as the current buffer is used. Otherwise the stop_streaming calback might remove it from the list and pass it to userspace while it is referenced in the irq handler. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dafna Hirschfeld authored
replace a read and write of RKISP1_CIF_ISP_CTRL register in the isr with the 'rkisp1_param_set_bits' function that does that. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dafna Hirschfeld authored
Currently the params isr is called and then returned when isp-frame interrupt is not set. This condition is already tested in the isp's isr so move the call under the condition in the isp's isr. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dafna Hirschfeld authored
The fields in struct 'rkisp1_cif_isp_lsc_config' need to hold values of 12 bits, therefore it is enough to declare them as u16. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dafna Hirschfeld authored
The two macros RKISP1_CIF_ISP_LSC_{GRAD/SIZE}_TBL_SIZE have the same value which is the number of sectors in the grads and size parameters. Therefore there is no need for two different macros. Replace them with one macro RKISP1_CIF_ISP_LSC_SECTORS_TBL_SIZE. Also use the macro when iterating the arrays instead of hardcoded '4'. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dafna Hirschfeld authored
Currently the fields '*_data_tbl' in the struct 'rkisp1_cif_isp_lsc_config' are one dimensional arrays of size 290. The entries are accessed in a nested loop by summing two indexes for the rows and columns. Therefore it fits better to define the arrays as two dimensional arrays of size 17x17. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-