- 13 Mar, 2018 40 commits
-
-
Alex Williamson authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 16b6c8bb ] When removing a device, for example a VF being removed due to SR-IOV teardown, a "soft" hot-unplug via 'echo 1 > remove' in sysfs, or an actual hot-unplug, we first remove the procfs and sysfs attributes for the device before attempting to release the device from any driver bound to it. Unbinding the driver from the device can take time. The device might need to write out data or it might be actively in use. If it's in use by userspace through a vfio driver, the unbind might block until the user releases the device. This leads to a potentially non-trivial amount of time where the device exists, but we've torn down the interfaces that userspace uses to examine devices, for instance lspci might generate this sort of error: pcilib: Cannot open /sys/bus/pci/devices/0000:01:0a.3/config lspci: Unable to read the standard configuration space header of device 0000:01:0a.3 We don't seem to have any dependence on this teardown ordering in the kernel, so let's unbind the driver first, which is also more symmetric with the instantiation of the device in pci_bus_add_device(). Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com>
-
Christoph Hellwig authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 5e422f5e ] There was one spot in xfs_bmap_add_extent_unwritten_real that didn't use the passed in new extent state but always converted to normal, leading to wrong behavior when converting from normal to unwritten. Only found by code inspection, it seems like this code path to move partial extent from written to unwritten while merging it with the next extent is rarely exercised. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Brian Foster authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 9f2a4505 ] It is possible for mkfs to format very small filesystems with too small of an internal log with respect to the various minimum size and block count requirements. If this occurs when the log happens to be smaller than the scan window used for cycle verification and the scan wraps the end of the log, the start_blk calculation in xlog_find_head() underflows and leads to an attempt to scan an invalid range of log blocks. This results in log recovery failure and a failed mount. Since there may be filesystems out in the wild with this kind of geometry, we cannot simply refuse to mount. Instead, cap the scan window for cycle verification to the size of the physical log. This ensures that the cycle verification proceeds as expected when the scan wraps the end of the log. Reported-by:
Zorro Lang <zlang@redhat.com> Signed-off-by:
-
Jiri Slaby authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 4dc12ffe ] l2tp_tunnel_delete does not return anything since commit 62b982ee ("l2tp: fix race condition in l2tp_tunnel_delete"). But call sites of l2tp_tunnel_delete still do casts to void to avoid unused return value warnings. Kill these now useless casts. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Sabrina Dubroca <sd@queasysnail.net> Cc: Guillaume Nault <g.nault@alphalink.fr> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Acked-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
tang.junhui authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit c1573137 ] Currently, Cache missed IOs are identified by s->cache_miss, but actually, there are many situations that missed IOs are not assigned a value for s->cache_miss in cached_dev_cache_miss(), for example, a bypassed IO (s->iop.bypass = 1), or the cache_bio allocate failed. In these situations, it will go to out_put or out_submit, and s->cache_miss is null, which leads bch_mark_cache_accounting() to treat this IO as a hit IO. [ML: applied by 3-way merge] Signed-off-by:
tang.junhui <tang.junhui@zte.com.cn> Reviewed-by:
Michael Lyle <mlyle@lyle.org> Reviewed-by:
Coly Li <colyli@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Liang Chen authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 330a4db8 ] mutex_destroy does nothing most of time, but it's better to call it to make the code future proof and it also has some meaning for like mutex debug. As Coly pointed out in a previous review, bcache_exit() may not be able to handle all the references properly if userspace registers cache and backing devices right before bch_debug_init runs and bch_debug_init failes later. So not exposing userspace interface until everything is ready to avoid that issue. Signed-off-by:
Liang Chen <liangchen.linux@gmail.com> Reviewed-by:
Eric Wheeler <bcache@linux.ewheeler.net> Signed-off-by:
-
Bob Peterson authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit cc555b09 ] This patch fixes a deadlock caused when the jdata flag is set for inodes that are already on the ordered write list. Since it is on the ordered write list, log_flush calls gfs2_ordered_write which calls filemap_fdatawrite. But since the inode had the jdata flag set, that calls gfs2_jdata_writepages, which tries to start a new transaction. A new transaction cannot be started because it tries to acquire the log_flush rwsem which is already locked by the log flush operation. The bottom line is: We cannot switch an inode from ordered to jdata until we eliminate any ordered data pages (via log flush) or any log_flush operation afterward will create the circular dependency above. So we need to flush the log before setting the diskflags to switch the file mode, then we need to remove the inode from the ordered writes list. Before this patch, the log flush was done for jdata->ordered, but that's wrong. If we're going from jdata to ordered, we don't need to call gfs2_log_flush because the call to filemap_fdatawrite will do it for us: filemap_fdatawrite() -> __filemap_fdatawrite_range() __filemap_fdatawrite_range() -> do_writepages() do_writepages() -> gfs2_jdata_writepages() gfs2_jdata_writepages() -> gfs2_log_flush() This patch modifies function do_gfs2_set_flags so that if a file has its jdata flag set, and it's already on the ordered write list, the log will be flushed and it will be removed from the list before setting the flag. Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Acked-by:
Abhijith Das <adas@redhat.com> Signed-off-by:
-
Daniel Lezcano authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 07209fcf ] There is a particular situation when the cooling device is cpufreq and the heat dissipation is not efficient enough where the temperature increases little by little until reaching the critical threshold and leading to a SoC reset. The behavior is reproducible on a hikey6220 with bad heat dissipation (eg. stacked with other boards). Running a simple C program doing while(1); for each CPU of the SoC makes the temperature to reach the passive regulation trip point and ends up to the maximum allowed temperature followed by a reset. This issue has been also reported by running the libhugetlbfs test suite. What is observed is a ping pong between two cpu frequencies, 1.2GHz and 900MHz while the temperature continues to grow. It appears the step wise governor calls get_target_state() the first time with the throttle set to true and the trend to 'raising'. The code selects logically the next state, so the cpu frequency decreases from 1.2GHz to 900MHz, so far so good. The temperature decreases immediately but still stays greater than the trip point, then get_target_state() is called again, this time with the throttle set to true *and* the trend to 'dropping'. From there the algorithm assumes we have to step down the state and the cpu frequency jumps back to 1.2GHz. But the temperature is still higher than the trip point, so get_target_state() is called with throttle=1 and trend='raising' again, we jump to 900MHz, then get_target_state() is called with throttle=1 and trend='dropping', we jump to 1.2GHz, etc ... but the temperature does not stabilizes and continues to increase. [ 237.922654] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1 [ 237.922678] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1 [ 237.922690] thermal cooling_device0: cur_state=0 [ 237.922701] thermal cooling_device0: old_target=0, target=1 [ 238.026656] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1 [ 238.026680] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=1 [ 238.026694] thermal cooling_device0: cur_state=1 [ 238.026707] thermal cooling_device0: old_target=1, target=0 [ 238.134647] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1 [ 238.134667] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1 [ 238.134679] thermal cooling_device0: cur_state=0 [ 238.134690] thermal cooling_device0: old_target=0, target=1 In this situation the temperature continues to increase while the trend is oscillating between 'dropping' and 'raising'. We need to keep the current state untouched if the throttle is set, so the temperature can decrease or a higher state could be selected, thus preventing this oscillation. Keeping the next_target untouched when 'throttle' is true at 'dropping' time fixes the issue. The following traces show the governor does not change the next state if trend==2 (dropping) and throttle==1. [ 2306.127987] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1 [ 2306.128009] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1 [ 2306.128021] thermal cooling_device0: cur_state=0 [ 2306.128031] thermal cooling_device0: old_target=0, target=1 [ 2306.231991] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1 [ 2306.232016] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=1 [ 2306.232030] thermal cooling_device0: cur_state=1 [ 2306.232042] thermal cooling_device0: old_target=1, target=1 [ 2306.335982] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1 [ 2306.336006] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=1 [ 2306.336021] thermal cooling_device0: cur_state=1 [ 2306.336034] thermal cooling_device0: old_target=1, target=1 [ 2306.439984] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1 [ 2306.440008] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=0 [ 2306.440022] thermal cooling_device0: cur_state=1 [ 2306.440034] thermal cooling_device0: old_target=1, target=0 [ ... ] After a while, if the temperature continues to increase, the next state becomes 2 which is 720MHz on the hikey. That results in the temperature stabilizing around the trip point. [ 2455.831982] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1 [ 2455.832006] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=0 [ 2455.832019] thermal cooling_device0: cur_state=1 [ 2455.832032] thermal cooling_device0: old_target=1, target=1 [ 2455.935985] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1 [ 2455.936013] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=0 [ 2455.936027] thermal cooling_device0: cur_state=1 [ 2455.936040] thermal cooling_device0: old_target=1, target=1 [ 2456.043984] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1 [ 2456.044009] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=0 [ 2456.044023] thermal cooling_device0: cur_state=1 [ 2456.044036] thermal cooling_device0: old_target=1, target=1 [ 2456.148001] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1 [ 2456.148028] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1 [ 2456.148042] thermal cooling_device0: cur_state=1 [ 2456.148055] thermal cooling_device0: old_target=1, target=2 [ 2456.252009] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1 [ 2456.252041] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=0 [ 2456.252058] thermal cooling_device0: cur_state=2 [ 2456.252075] thermal cooling_device0: old_target=2, target=1 IOW, this change is needed to keep the state for a cooling device if the temperature trend is oscillating while the temperature increases slightly. Without this change, the situation above leads to a catastrophic crash by a hardware reset on hikey. This issue has been reported to happen on an OMAP dra7xx also. Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Keerthy <j-keerthy@ti.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Leo Yan <leo.yan@linaro.org> Tested-by:
Keerthy <j-keerthy@ti.com> Reviewed-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Gao Feng authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit f02b2320 ] The mutex_destroy only makes sense when enable DEBUG_MUTEX. For the good readbility, it's better to invoke it in exit func when the init func invokes mutex_init. Signed-off-by:
Gao Feng <gfree.wind@vip.163.com> Acked-by:
-
Michał Mirosław authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 54eff226 ] According to comments in code and common sense, cclk_lp uses its own divisor, not cclk_g's. Fixes: b08e8c0e ("clk: tegra: add clock support for Tegra30") Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-By:
Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Sébastien Szymanski authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit c68ee58d ] On i.MX6 SoCs without VPU (in my case MCIMX6D4AVT10AC), the hdmi driver fails to probe: [ 2.540030] dwhdmi-imx 120000.hdmi: Unsupported HDMI controller (0000:00:00) [ 2.548199] imx-drm display-subsystem: failed to bind 120000.hdmi (ops dw_hdmi_imx_ops): -19 [ 2.557403] imx-drm display-subsystem: master bind failed: -19 That's because hdmi_isfr's parent, video_27m, is not correctly ungated. As explained in commit 5ccc248c ("ARM: imx6q: clk: Add support for mipi_core_cfg clock as a shared clock gate"), video_27m is gated by CCM_CCGR3[CG8]. On i.MX6 SoCs with VPU, the hdmi is working thanks to the CCM_CMEOR[mod_en_ov_vpu] bit which makes the video_27m ungated whatever is in CCM_CCGR3[CG8]. The issue can be reproduced by setting CCMEOR[mod_en_ov_vpu] to 0. Make the HDMI work in every case by setting hdmi_isfr's parent to mipi_core_cfg. Signed-off-by:
Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Chen Zhong authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit c955bf39 ] Since the previous setup always sets the PLL using crystal 26MHz, this doesn't always happen in every MediaTek platform. So the patch added flexibility for assigning extra member for determining the PLL source clock. Signed-off-by:
Chen Zhong <chen.zhong@mediatek.com> Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
Jan Kara authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 592e2545 ] _calc_vm_trans() does not handle the situation when some of the passed flags are 0 (which can happen if these VM flags do not make sense for the architecture). Improve the _calc_vm_trans() macro to return 0 in such situation. Since all passed flags are constant, this does not add any runtime overhead. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Robert Baronescu authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 7aacbfcb ] Fix the way the length of the buffers used for encryption / decryption are computed. For e.g. in case of encryption, input buffer does not contain an authentication tag. Signed-off-by:
Robert Baronescu <robert.baronescu@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Suzuki K Poulose authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit c7f5828b ] When the PMU driver is built as a module, the perf expects the pmu->module to be valid, so that the driver is prevented from being unloaded while it is in use. Fix the CCN pmu driver to fill in this field. Fixes: a33b0daa ("bus: ARM CCN PMU driver") Cc: Pawel Moll <pawel.moll@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Jiang Yi authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 594e25e7 ] The function fd_execute_unmap() in target_core_file.c calles ret = file->f_op->fallocate(file, mode, pos, len); Some filesystems implement fallocate() to return error if length is zero (e.g. btrfs) but according to SCSI Block Commands spec UNMAP should return success for zero length. Signed-off-by:
Jiang Yi <jiangyilism@gmail.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
tangwenji authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 24528f08 ] When is pr_reg->isid_present_at_reg is false,this function should return. This fixes a regression originally introduced by: commit d2843c17 Author: Andy Grover <agrover@redhat.com> Date: Thu May 16 10:40:55 2013 -0700 target: Alter core_pr_dump_initiator_port for ease of use Signed-off-by:
tangwenji <tang.wenji@zte.com.cn> Signed-off-by:
-
tangwenji authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 12d5a43b ] tpg must free when call core_tpg_register() return fail Signed-off-by:
-
Bart Van Assche authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit cfe2b621 ] Avoid that cmd->se_cmd.se_tfo is read after a command has already been freed. Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Christie <mchristi@redhat.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Christophe Leroy authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 6b148a7c ] IPIC Status is provided by register IPIC_SERSR and not by IPIC_SERMR which is the mask register. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
William A. Kennington III authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 71e24d77 ] The current code checks the completion map to look for the first token that is complete. In some cases, a completion can come in but the token can still be on lease to the caller processing the completion. If this completed but unreleased token is the first token found in the bitmap by another tasks trying to acquire a token, then the __test_and_set_bit call will fail since the token will still be on lease. The acquisition will then fail with an EBUSY. This patch reorganizes the acquisition code to look at the opal_async_token_map for an unleased token. If the token has no lease it must have no outstanding completions so we should never see an EBUSY, unless we have leased out too many tokens. Since opal_async_get_token_inrerruptible is protected by a semaphore, we will practically never see EBUSY anymore. Fixes: 8d724823 ("powerpc/powernv: Infrastructure to support OPAL async completion") Signed-off-by:
William A. Kennington III <wak@google.com> Signed-off-by:
-
KUWAZAWA Takuya authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit c5504f72 ] Information about ipvs in different network namespace can be seen via procfs. How to reproduce: # ip netns add ns01 # ip netns add ns02 # ip netns exec ns01 ip a add dev lo 127.0.0.1/8 # ip netns exec ns02 ip a add dev lo 127.0.0.1/8 # ip netns exec ns01 ipvsadm -A -t 10.1.1.1:80 # ip netns exec ns02 ipvsadm -A -t 10.1.1.2:80 The ipvsadm displays information about its own network namespace only. # ip netns exec ns01 ipvsadm -Ln IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 10.1.1.1:80 wlc # ip netns exec ns02 ipvsadm -Ln IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 10.1.1.2:80 wlc But I can see information about other network namespace via procfs. # ip netns exec ns01 cat /proc/net/ip_vs IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 0A010101:0050 wlc TCP 0A010102:0050 wlc # ip netns exec ns02 cat /proc/net/ip_vs IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 0A010102:0050 wlc Signed-off-by:
KUWAZAWA Takuya <albatross0@gmail.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Shriya authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit cd77b5ce ] The call to /proc/cpuinfo in turn calls cpufreq_quick_get() which returns the last frequency requested by the kernel, but may not reflect the actual frequency the processor is running at. This patch makes a call to cpufreq_get() instead which returns the current frequency reported by the hardware. Fixes: fb5153d0 ("powerpc: powernv: Implement ppc_md.get_proc_freq()") Signed-off-by:
Shriya <shriyak@linux.vnet.ibm.com> Signed-off-by:
-
Qiang authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 3ad3f8ce ] PCIe PME and native hotplug share the same interrupt number, so hotplug interrupts are also processed by PME. In some cases, e.g., a Link Down interrupt, a device may be present but unreachable, so when we try to read its Root Status register, the read fails and we get all ones data (0xffffffff). Previously, we interpreted that data as PCI_EXP_RTSTA_PME being set, i.e., "some device has asserted PME," so we scheduled pcie_pme_work_fn(). This caused an infinite loop because pcie_pme_work_fn() tried to handle PME requests until PCI_EXP_RTSTA_PME is cleared, but with the link down, PCI_EXP_RTSTA_PME can't be cleared. Check for the invalid 0xffffffff data everywhere we read the Root Status register. 1469d17d ("PCI: pciehp: Handle invalid data when reading from non-existent devices") added similar checks in the hotplug driver. Signed-off-by:
Qiang Zheng <zhengqiang10@huawei.com> [bhelgaas: changelog, also check in pcie_pme_work_fn(), use "~0" to follow other similar checks] Signed-off-by:
-
Peter Ujfalusi authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 288e7560 ] The used 0x1f mask is only valid for am335x family of SoC, different family using this type of crossbar might have different number of electable events. In case of am43xx family 0x3f mask should have been used for example. Instead of trying to handle each family's mask, just use u8 type to store the mux value since the event offsets are aligned to byte offset. Fixes: 42dbdcc6 ("dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx") Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Philipp Zabel authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit a3350f9c ] The pcf8563_clkout_recalc_rate function erroneously ignores the frequency index read from the CLKO register and always returns 32768 Hz. Fixes: a39a6405 ("rtc: pcf8563: add CLKOUT to common clock framework") Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Christophe JAILLET authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 8cae353e ] 'ret' is known to be 0 at this point. In case of memory allocation error in 'framebuffer_alloc()', return -ENOMEM instead. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Christophe JAILLET authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 451f1306 ] We should go through the error handling code instead of returning -ENOMEM directly. Signed-off-by:
-
Ladislav Michl authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit c9876947 ] While usb_control_msg function expects timeout in miliseconds, a value of HZ is used. Replace it with USB_CTRL_GET_TIMEOUT and also fix error message which looks like: udlfb: Read EDID byte 78 failed err ffffff92 as error is either negative errno or number of bytes transferred use %d format specifier. Returned EDID is in second byte, so return error when less than two bytes are received. Fixes: 18dffdf8 ("staging: udlfb: enhance EDID and mode handling support") Signed-off-by:
Ladislav Michl <ladis@linux-mips.org> Cc: Bernie Thompson <bernie@plugable.com> Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit ac831a37 ] Dan's static analysis says: drivers/video/fbdev/controlfb.c:560 control_setup() error: buffer overflow 'control_mac_modes' 20 <= 21 Indeed, control_mac_modes[] has only 20 elements, while VMODE_MAX is 22, which may lead to an out of bounds read when parsing vmode commandline options. The bug was introduced in v2.4.5.6, when 2 new modes were added to macmodes.h, but control_mac_modes[] wasn't updated: https://kernel.opensuse.org/cgit/kernel/diff/include/video/macmodes.h?h=v2.5.2&id=29f279c764808560eaceb88fef36cbc35c529aad Augment control_mac_modes[] with the two new video modes to fix this. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Robert Stonehouse authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit cbad52e9 ] Fixes: 535a6177 ("sfc: suppress handled MCDI failures when changing the MAC address") Signed-off-by:
Bert Kenward <bkenward@solarflare.com> Signed-off-by:
-
Mike Christie authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 760bf578 ] This fixes the following races: 1. core_alua_do_transition_tg_pt could have read tg_pt_gp_alua_access_state and gone into this if chunk: if (!explicit && atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state) == ALUA_ACCESS_STATE_TRANSITION) { and then core_alua_do_transition_tg_pt_work could update the state. core_alua_do_transition_tg_pt would then only set tg_pt_gp_alua_pending_state and the tg_pt_gp_alua_access_state would not get updated with the second calls state. 2. core_alua_do_transition_tg_pt could be setting tg_pt_gp_transition_complete while the tg_pt_gp_transition_work is already completing. core_alua_do_transition_tg_pt then waits on the completion that will never be called. To handle these issues, we just call flush_work which will return when core_alua_do_transition_tg_pt_work has completed so there is no need to do the complete/wait. And, if core_alua_do_transition_tg_pt_work was running, instead of trying to sneak in the state change, we just schedule up another core_alua_do_transition_tg_pt_work call. Note that this does not handle a possible race where there are multiple threads call core_alua_do_transition_tg_pt at the same time. I think we need a mutex in target_tg_pt_gp_alua_access_state_store. Signed-off-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
-
Mike Christie authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit d7175373 ] The implicit transition time tells initiators the min time to wait before timing out a transition. We currently schedule the transition to occur in tg_pt_gp_implicit_trans_secs seconds so there is no room for delays. If core_alua_do_transition_tg_pt_work->core_alua_update_tpg_primary_metadata needs to write out info to a remote file, then the initiator can easily time out the operation. Signed-off-by:
-
Mike Christie authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 207ee841 ] If tcmu-runner is processing a STPG and needs to change the kernel's ALUA state then we cannot use the same work queue for task management requests and ALUA transitions, because we could deadlock. The problem occurs when a STPG times out before tcmu-runner is able to call into target_tg_pt_gp_alua_access_state_store-> core_alua_do_port_transition -> core_alua_do_transition_tg_pt -> queue_work. In this case, the tmr is on the work queue waiting for the STPG to complete, but the STPG transition is now queued behind the waiting tmr. Note: This bug will also be fixed by this patch: http://www.spinics.net/lists/target-devel/msg14560.html which switches the tmr code to use the system workqueues. For both, I am not sure if we need a dedicated workqueue since it is not a performance path and I do not think we need WQ_MEM_RECLAIM to make forward progress to free up memory like the block layer does. Signed-off-by:
-
Zygo Blaxell authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit e1699d2d ] This is a story about 4 distinct (and very old) btrfs bugs. Commit c8b97818 ("Btrfs: Add zlib compression support") added three data corruption bugs for inline extents (bugs #1-3). Commit 93c82d57 ("Btrfs: zero page past end of inline file items") fixed bug #1: uncompressed inline extents followed by a hole and more extents could get non-zero data in the hole as they were read. The fix was to add a memset in btrfs_get_extent to zero out the hole. Commit 166ae5a4 ("btrfs: fix inline compressed read err corruption") fixed bug #2: compressed inline extents which contained non-zero bytes might be replaced with zero bytes in some cases. This patch removed an unhelpful memset from uncompress_inline, but the case where memset is required was missed. There is also a memset in the decompression code, but this only covers decompressed data that is shorter than the ram_bytes from the extent ref record. This memset doesn't cover the region between the end of the decompressed data and the end of the page. It has also moved around a few times over the years, so there's no single patch to refer to. This patch fixes bug #3: compressed inline extents followed by a hole and more extents could get non-zero data in the hole as they were read (i.e. bug #3 is the same as bug #1, but s/uncompressed/compressed/). The fix is the same: zero out the hole in the compressed case too, by putting a memset back in uncompress_inline, but this time with correct parameters. The last and oldest bug, bug #0, is the cause of the offending inline extent/hole/extent pattern. Bug #0 is a subtle and mostly-harmless quirk of behavior somewhere in the btrfs write code. In a few special cases, an inline extent and hole are allowed to persist where they normally would be combined with later extents in the file. A fast reproducer for bug #0 is presented below. A few offending extents are also created in the wild during large rsync transfers with the -S flag. A Linux kernel build (git checkout; make allyesconfig; make -j8) will produce a handful of offending files as well. Once an offending file is created, it can present different content to userspace each time it is read. Bug #0 is at least 4 and possibly 8 years old. I verified every vX.Y kernel back to v3.5 has this behavior. There are fossil records of this bug's effects in commits all the way back to v2.6.32. I have no reason to believe bug #0 wasn't present at the beginning of btrfs compression support in v2.6.29, but I can't easily test kernels that old to be sure. It is not clear whether bug #0 is worth fixing. A fix would likely require injecting extra reads into currently write-only paths, and most of the exceptional cases caused by bug #0 are already handled now. Whether we like them or not, bug #0's inline extents followed by holes are part of the btrfs de-facto disk format now, and we need to be able to read them without data corruption or an infoleak. So enough about bug #0, let's get back to bug #3 (this patch). An example of on-disk structure leading to data corruption found in the wild: item 61 key (606890 INODE_ITEM 0) itemoff 9662 itemsize 160 inode generation 50 transid 50 size 47424 nbytes 49141 block group 0 mode 100644 links 1 uid 0 gid 0 rdev 0 flags 0x0(none) item 62 key (606890 INODE_REF 603050) itemoff 9642 itemsize 20 inode ref index 3 namelen 10 name: DB_File.so item 63 key (606890 EXTENT_DATA 0) itemoff 8280 itemsize 1362 inline extent data size 1341 ram 4085 compress(zlib) item 64 key (606890 EXTENT_DATA 4096) itemoff 8227 itemsize 53 extent data disk byte 5367308288 nr 20480 extent data offset 0 nr 45056 ram 45056 extent compression(zlib) Different data appears in userspace during each read of the 11 bytes between 4085 and 4096. The extent in item 63 is not long enough to fill the first page of the file, so a memset is required to fill the space between item 63 (ending at 4085) and item 64 (beginning at 4096) with zero. Here is a reproducer from Liu Bo, which demonstrates another method of creating the same inline extent and hole pattern: Using 'page_poison=on' kernel command line (or enable CONFIG_PAGE_POISONING) run the following: # touch foo # chattr +c foo # xfs_io -f -c "pwrite -W 0 1000" foo # xfs_io -f -c "falloc 4 8188" foo # od -x foo # echo 3 >/proc/sys/vm/drop_caches # od -x foo This produce the following on my box: Correct output: file contains 1000 data bytes followed by zeros: 0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd * 0001740 cdcd cdcd cdcd cdcd 0000 0000 0000 0000 0001760 0000 0000 0000 0000 0000 0000 0000 0000 * 0020000 Actual output: the data after the first 1000 bytes will be different each run: 0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd * 0001740 cdcd cdcd cdcd cdcd 6c63 7400 635f 006d 0001760 5f74 6f43 7400 435f 0053 5f74 7363 7400 0002000 435f 0056 5f74 6164 7400 645f 0062 5f74 (...) Signed-off-by:
Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Reviewed-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Olga Kornievskaia authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 03385332 ] Currently client doesn't respect max sizes server returns in CREATE_SESSION. nfs4_session_set_rwsize() gets called and server->rsize, server->wsize are 0 so they never get set to the sizes returned by the server. Signed-off-by:
Olga Kornievskaia <kolga@netapp.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Daniel Drake authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 822f5845 ] The Intel Compute Stick STCK1A8LFC and Weibu F3C platforms both log 2 error messages during boot: efi: requested map not found. esrt: ESRT header is not in the memory map. Searching the web, this seems to affect many other platforms too. Since these messages are logged as errors, they appear on-screen during the boot process even when using the "quiet" boot parameter used by distros. Demote the ESRT error to a warning so that it does not appear on-screen, and delete the error logging from efi_mem_desc_lookup; both callsites of that function log more specific messages upon failure. Out of curiosity I looked closer at the Weibu F3C. There is no entry in the UEFI-provided memory map which corresponds to the ESRT pointer, but hacking the code to map it anyway, the ESRT does appear to be valid with 2 entries. Signed-off-by:
Daniel Drake <drake@endlessm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Acked-by:
Peter Jones <pjones@redhat.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Daniel Borkmann authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit e7ede72a ] The current symbols__fixup_end() heuristic for the last entry in the rb tree is suboptimal as it leads to not being able to recognize the symbol in the call graph in a couple of corner cases, for example: i) If the symbol has a start address (f.e. exposed via kallsyms) that is at a page boundary, then the roundup(curr->start, 4096) for the last entry will result in curr->start == curr->end with a symbol length of zero. ii) If the symbol has a start address that is shortly before a page boundary, then also here, curr->end - curr->start will just be very few bytes, where it's unrealistic that we could perform a match against. Instead, change the heuristic to roundup(curr->start, 4096) + 4096, so that we can catch such corner cases and have a better chance to find that specific symbol. It's still just best effort as the real end of the symbol is unknown to us (and could even be at a larger offset than the current range), but better than the current situation. Alexei reported that he recently run into case i) with a JITed eBPF program (these are all page aligned) as the last symbol which wasn't properly shown in the call graph (while other eBPF program symbols in the rb tree were displayed correctly). Since this is a generic issue, lets try to improve the heuristic a bit. Reported-and-Tested-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Fixes: 2e538c4a ("perf tools: Improve kernel/modules symbol lookup") Link: http://lkml.kernel.org/r/bb5c80d27743be6f12afc68405f1956a330e1bc9.1489614365.git.daniel@iogearbox.netSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
David Howells authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 7286a35e ] Fix afs_kill_pages() in two ways: (1) If a writeback has been partially flushed, then if we try and kill the pages it contains, some of them may no longer be undergoing writeback and end_page_writeback() will assert. Fix this by checking to see whether the page in question is actually undergoing writeback before ending that writeback. (2) The loop that scans for pages to kill doesn't increase the first page index, and so the loop may not terminate, but it will try to process the same pages over and over again. Fix this by increasing the first page index to one after the last page we processed. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
BugLink: http://bugs.launchpad.net/bugs/1745052 [ Upstream commit 6d06b0d2 ] afs_write_begin() leaks a ref and a lock on a page if afs_fill_page() fails. Fix the leak by unlocking and releasing the page in the error path. Signed-off-by:
-
