- 31 Aug, 2004 6 commits
-
-
Prasanna S. Panchamukhi authored
This patch helps developers to trap at almost any kernel code address, specifying a handler routine to be invoked when the breakpoint is hit. Useful for analysing the Linux kernel by collecting debugging information non-disruptively. Employs single-stepping out-of-line to avoid probe misses on SMP and may be especially useful in aiding debugging elusive races and problems on live systems. More elaborate dynamic tracing tools such as DProbes can be built over the kprobes interface. Helps developers to trap at almost any kernel code address, specifying a handler routine to be invoked when the breakpoint is hit. Useful for analysing the Linux kernel by collecting debugging information non-disruptively. Employs single-stepping out-of-line to avoid probe misses on SMP and may be especially useful in aiding debugging elusive races and problems on live systems. More elaborate dynamic tracing tools such as DProbes can be built over the kprobes interface. Sample usage: To place a probe on __blockdev_direct_IO: static int probe_handler(struct kprobe *p, struct pt_regs *) { ... whatever ... } struct kprobe kp = { .addr = __blockdev_direct_IO, .pre_handler = probe_handler }; register_kprobe(&kp); Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Prasanna S. Panchamukhi authored
This patch provides notifiers for i386 architecture exceptions. This patch has been ported from x86_64 architecture as suggested by Andi Kleen. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Philippe Elie authored
Contributions from Zarakin <zarakin@hotpop.com> Intel removed two msrs: MSR_P4_IQ_ESCR_0|1 (0x3ba/0x3bb), P4 model >= 3. See Intel documentation Vol. 3 System Programming Guide Appendix B. nmi_watchdog=2 oopsed at boot time and oprofile at driver load. Avoid touching them when model >= 3. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Jason Davis authored
This update only applies to Unisys' ES7000 server machines. The patch adds a OEM id check to verify the current machine running is actually a Unisys type box before executing the Unisys OEM parser routine. It also increases the MAX_MP_BUSSES definition from 32 to 256. On the ES7000s, bus ID numbering can range from 0 to 255. Without the patch, the system panics if booted with acpi=off. This patch has been tested and verified on an authentic ES7000 machine. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Bjorn Helgaas authored
Make assign_irq_vector() non-__init always (it's called from io_apic_set_pci_routing(), which is used in the pci_enable_device() path). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Anton Blanchard authored
I had a problem when compiling a 2.6 kernel with gcc 3.5 CVS. The prototype for prio_tree_remove in mm/prio_tree.c is inside another function. gcc 3.5 gets upset and removes the function completely. Apparently this isnt valid C, so lets fix it up. Details can be found here: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=17205Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 30 Aug, 2004 3 commits
-
-
Dave Jones authored
Nehemiah wasn't having the CX8 bit enabled before. In fixing it up, I rewrote the code to be a little clearer. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Richard Henderson authored
From: Ivan Kokshaysky <ink@jurassic.park.msu.ru> - big functions moved out of line; - handle dev == NULL case, which apparently means the isa device. As before, this is needed for Jensen. This also makes the isa sound drivers working again with recent kernels.
-
bk://bk.arm.linux.org.uk/linux-2.6-rmkLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
- 31 Aug, 2004 3 commits
-
-
Ben Dooks authored
Patch from Ben Dooks Register definitions, and support for modifying the Drive Strength Control registers on the S3C2440 Signed-off-by: Ben Dooks
-
Ben Dooks authored
Patch from Ben Dooks Ensure we check for IRQ pending for the gettimeoffset() function
-
Ben Dooks authored
Patch from Ben Dooks Add the definition of timer 0's dead-zone capability
-
- 30 Aug, 2004 9 commits
-
-
David S. Miller authored
into kernel.bkbits.net:/home/davem/tg3-2.6
-
David S. Miller authored
-
David S. Miller authored
Need to clear one bit at a time, so if we are clearing both 625_CORE_CLOCK and ALTCLOCK we first clear the latter then the final write will clear the former. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Otherwise we do not handle properly the case where the switch/hub does not support auto- negotiation. This is what was breaking 5704 hw fiber autoneg. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@redhat.com>
-
bk://gkernel.bkbits.net/libata-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Bartlomiej Zolnierkiewicz authored
[patch] libata: ata_piix.c PIO fix "[libata] transfer mode cleanup" introduced bug in ata_piix.c: previously PIO number (not mode) was passed to piix_set_piomode(). Fortunately this function is only used for (disabled) PATA support. I bet that this is the reason why MWDMA didn't work for PATA. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
-
Andrew Morton authored
The ioctl32 conversion registration stubs are in ioctl32.h now. Signed-off-by: Andrew Morton <akpm@osdl.org>
-
- 29 Aug, 2004 6 commits
-
-
bk://cifs.bkbits.net/linux-2.5cifsLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
http://oss.sgi.com:8090/xfs-linux-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
bk://linux.bkbits.net/linux-2.5Steve French authored
into hostme.bitkeeper.com:/repos/c/cifs/linux-2.5cifs
-
Steve French authored
-
Linus Torvalds authored
Paolo Giarrusso points out that the UML merge incorrectly caused INITIAL_JIFFIES to be reset back to zero, instead of the debug value for getting an early jiffies wrap. Fix it back up.
-
bk://linux.bkbits.net/linux-2.5Steve French authored
into hostme.bitkeeper.com:/repos/c/cifs/linux-2.5cifs
-
- 28 Aug, 2004 13 commits
-
-
Andrew Chew authored
This patch fixes a problem introduced when CK804 support was added. mmio_base can only be set in the CK804 case, else libata will attempt to iounmap mmio_base, which isn't iomapped for the non-CK804 case. Still need the bar 5 address, so steal from host_set->ports[0]->ioaddr.scr_addr. Jeff, let me know if this is a bad thing to do.
-
Armin Schindler authored
Fix of the debug/trace driver and removal of irq locks. - Only spinlocks[bh] are used now. - Removed obsolete direct debug /proc interface. - Update of internal trace features and its API. - Use common definition of MAX_DESCRIPTORS.
-
bk://gkernel.bkbits.net/net-drivers-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Matt Porter authored
Optimizes transmit windows for improved performance and to prevent TX underruns. Fixes driver registration error handling. Fixes ZMII and RGMII thinkos. Fixes for MDIO handling issues from Ralph Siemsen. Please apply. Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
-
Jeremy Higdon authored
We seem to have found an overflow problem in libata-core.c. We were trying to DMA to the address range 0xffff8000-0xffffbfff. In the original version of the code, given that address and count (0xffff8000 and 0x4000), the variable "boundary" would be set to 0, causing len to be set to 0x8000 (which is greater than sg_len). Then at the bottom of the loop, sg_len would be set to 0xffffc000 (0x4000 - 0x8000), which would then cause the loop never to terminate (until much of memory was scribbled over or the kernel died). The code below should be functionally identical, but not be subject to the same overflow problem (boundary needs to be a u33). Signed-off-by: jeremy@sgi.com ===== drivers/scsi/libata-core.c 1.94 vs edited =====
-
http://jfs.bkbits.net/linux-2.5Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
bk://linux-voyager.bkbits.net/dma-declare-coherent-memory-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Thayne Harbaugh authored
-
Andrew Morton authored
From: Laurent <laurent@gobio2.net> Some time ago, I sent on this list a mail about my strange problem with my SiS900 network card (Subject was Sluggish performances with FreeBSD) To sum up, when my card is in 100Mb mode, I have poor throughput but in 10Mb, all seems normal. After some tests, it seems these results was due to a misdetection of the PHY device. mii-tool reports : product info: vendor 08:00:17, model 3 rev 0 and after some search on the web, I found it's a NS DP83847 which is very similar. Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Dave Kleikamp authored
into austin.ibm.com:/shaggy/bk/jfs-2.5
-
Dave Kleikamp authored
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
-
bk://linux.bkbits.net/linux-2.5Steve French authored
into hostme.bitkeeper.com:/repos/c/cifs/linux-2.5cifs
-
bk://linux.bkbits.net/linux-2.5Dave Kleikamp authored
into hostme.bitkeeper.com:/repos/j/jfs/linux-2.5
-