- 25 Nov, 2014 5 commits
-
-
Hans Verkuil authored
Several control helper functions are no longer needed since most drivers are now converted to the control framework. So we can delete them. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
These days vdev->v4l2_dev must always be set. This means that some old code that still tests for a NULL vdev->v4l2_dev can be removed or simplified. Signed-off-by:
-
Hans Verkuil authored
Never use sg++, always use sg = sg_next(sg). Scatterlist entries can be combined if the memory is contiguous but sg++ won't know about that. As far as I can tell cx88 and ivtv are really broken because of this, and bttv and cx25821 are OK because vb1 doesn't combine scatterlist entries. But regardless, sg++ should never be used, only sg_next is safe. Signed-off-by:
-
Prabhakar Lad authored
Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Hans Verkuil authored
The omap2 media driver got removed. Remove a left-over for tcm825x driver that were also at omap2 tree. Signed-off-by:
-
- 21 Nov, 2014 13 commits
-
-
Christian Resell authored
Simple style fix (checkpatch.pl: "space prohibited before that ','"). For the eudyptula challenge (http://eudyptula-challenge.org/). Signed-off-by:
Christian F. Resell <christian.resell@gmail.com> Signed-off-by:
-
Olli Salonen authored
When new parameters are added for si2168 driver, the parameters have to be explicitly defined for each device if the si2168_config struct is not initialized to all zeros. Signed-off-by:
Olli Salonen <olli.salonen@iki.fi> Signed-off-by:
-
Olli Salonen authored
When new parameters are added for si2168 driver, the parameters have to be explicitly defined for each device if the si2168_config struct is not initialized to all zeros. Signed-off-by:
-
Olli Salonen authored
When new parameters are added for si2168 driver, the parameters have to be explicitly defined for each device if the si2168_config struct is not initialized to all zeros. Signed-off-by:
-
Andreas Ruprecht authored
In smipcie.c, the function i2c_bit_add_bus() is called. This function is defined by the I2C bit-banging interfaces enabled with CONFIG_I2C_ALGOBIT. As there was no dependency in Kconfig, CONFIG_I2C_ALGOBIT could be set to "m" while CONFIG_DVB_SMIPCIE was set to "y", resulting in a build error due to an undefined reference. This patch adds the dependency on CONFIG_I2C_ALGOBIT in Kconfig by selecting it when CONFIG_DVB_SMIPCIE is selected. Signed-off-by:
Andreas Ruprecht <rupran@einserver.de> Reported-by:
Jim Davis <jim.epost@gmail.com> Signed-off-by:
-
Antti Palosaari authored
Load SDR sub-driver in order to support SDR for devices having this tuner too. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
That logic was duplicated from rtl2832_sdr.h in order to avoid hard dependency for staging directory. rtl2832_sdr is moved to media, so we could remove that code now. Signed-off-by:
-
Antti Palosaari authored
Better to rename tuner I2C to something which clearly says it is for tuner as there is now multiple different I2C clients used. Signed-off-by:
-
Antti Palosaari authored
There is RTL2832P devices having extra MN88473 demodulator. This patch add support for such configuration. Logically MN88473 slave demodulator is connected to RTL2832 master demodulator, both I2C bus and TS input. RTL2832 is integrated to RTL2832U and RTL2832P chips. Chip version RTL2832P has extra TS interface for connecting slave demodulator. Signed-off-by:
-
Antti Palosaari authored
There is RTL2832P devices having extra MN88472 demodulator. This patch add support for such configuration. Logically MN88472 slave demodulator is connected to RTL2832 master demodulator, both I2C bus and TS input. RTL2832 is integrated to RTL2832U and RTL2832P chips. Chip version RTL2832P has extra TS interface for connecting slave demodulator. Signed-off-by:
-
Antti Palosaari authored
Implement partial PIP mode to carry TS from slave demodulator, through that master demodulator. RTL2832 demod has TS input interface to connected another demodulator TS output. Signed-off-by:
-
Hans Verkuil authored
The omap2 camera driver and the tcm825x sensor driver have been deprecated for a year and are now being removed. They are unmaintained and they use an internal API that has long since been superseded by a much better API. Worse, that internal API has been abused by out-of-kernel trees (i.MX6). In addition, Sakari stated that these drivers have never been in a usable state in the mainline kernel due to missing platform data. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Cc: David Cohen <dacohen@gmail.com> Signed-off-by:
-
Hans Verkuil authored
The omap2 camera driver has been deprecated for a year and is now going to be removed. It is unmaintained and it uses an internal API that has long since been superseded by a much better API. Worse, that internal API has been abused by out-of-kernel trees (i.MX6). In addition, Sakari stated that these drivers have never been in a usable state in the mainline kernel due to missing platform data. Signed-off-by:
Tony Lindgren <tony@atomide.com> Cc: David Cohen <dacohen@gmail.com> Signed-off-by:
-
- 14 Nov, 2014 22 commits
-
-
Nibble Max authored
DVBSky T982 DVB-T2/T/C dual PCIe card: 1>dvb frontend: SI2158A20(tuner),SI2168A30(demod) 2>PCIe bridge: CX23885(port b: parallel mode, port c: serial mode) 3>rc: cx23885 integrated. Signed-off-by:
Nibble Max <nibble.max@gmail.com> Reviewed-by:
-
Wilson Michaels authored
This patch adds "lgdt330x" device name i2c_devs array used for debugging Signed-off-by:
Wilson Michaels <thebitpit@earthlink.net> Signed-off-by:
-
Prabhakar Lad authored
this patch adds support for using vb2_start_streaming_called() for cx88-blackbird driver. Signed-off-by:
-
Prabhakar Lad authored
this patch adds support for using vb2_start_streaming_called() for vivid driver. Signed-off-by:
-
Sebastian Reichel authored
Remove unreferenced members from the platform data's structure. Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Sebastian Reichel authored
This updates platform data related to Si4713, which has been updated to be compatible with DT interface. Signed-off-by:
-
Sebastian Reichel authored
This patch adds the DT bindings documentation for Silicon Labs Si4713 FM radio transmitter. Signed-off-by:
-
Sebastian Reichel authored
Add device tree support by changing the device registration order. In the device tree the si4713 node is a normal I2C device, which will be probed as such. Thus the V4L device must be probed from the I2C device and not the other way around. Signed-off-by:
-
Sebastian Reichel authored
Introduce the usage of managed irq request to simplify the code slightly. Signed-off-by:
-
Sebastian Reichel authored
Introduce the usage of managed memory allocation to simplify the code slightly. Signed-off-by:
-
Sebastian Reichel authored
This updates the driver to use the managed gpiod interface instead of the unmanged old GPIO API. This is a preperation for the introduction of device tree support. Signed-off-by:
-
Sebastian Reichel authored
This switches back to the normal regulator API (but use managed variant) in preparation for device tree support. Signed-off-by:
-
Boris BREZILLON authored
Place v4l2_mbus_pixelcode in a #ifndef __KERNEL__ section so that kernel users don't have access to these definitions. We have to keep this definition for user-space users even though they're encouraged to move to the new media_bus_format enum. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Boris BREZILLON authored
In order to have subsytem agnostic media bus format definitions we've moved media bus definition to include/uapi/linux/media-bus-format.h and prefixed enum values with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT. Reference new definitions in the ipu-v3 driver. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
-
Boris BREZILLON authored
In order to have subsytem agnostic media bus format definitions we've moved media bus definition to include/uapi/linux/media-bus-format.h and prefixed values with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT. Reference new definitions in all media drivers residing in staging. Signed-off-by:
-
Boris BREZILLON authored
In order to have subsytem agnostic media bus format definitions we've moved media bus definition to include/uapi/linux/media-bus-format.h and prefixed enum values with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT. Reference new definitions in all usb drivers. Signed-off-by:
-
Boris BREZILLON authored
In order to have subsytem agnostic media bus format definitions we've moved media bus definition to include/uapi/linux/media-bus-format.h and prefixed values with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT. Reference new definitions in all platform drivers. Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Acked-by:
-
Boris BREZILLON authored
In order to have subsytem agnostic media bus format definitions we've moved media bus definition to include/uapi/linux/media-bus-format.h and prefixed values with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT. Replace all references to the old definitions in pci drivers. Signed-off-by:
-
Boris BREZILLON authored
In order to have subsytem agnostic media bus format definitions we've moved media bus definitions to include/uapi/linux/media-bus-format.h and prefixed values with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT. Replace all references to the old definitions in i2c drivers. Signed-off-by:
-
Boris BREZILLON authored
Replace references to the v4l2_mbus_pixelcode enum with the new media_bus_format enum in all common headers. Signed-off-by:
-
Boris BREZILLON authored
In order to have subsytem agnostic media bus format definitions we've moved media bus definition to include/uapi/linux/media-bus-format.h and prefixed them with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT. Update the v4l documentation accordingly. Signed-off-by:
-
Boris BREZILLON authored
Define MEDIA_BUS_FMT macros (re-using the values defined in the v4l2_mbus_pixelcode enum) into a separate header file so that they can be used from the DRM/KMS subsystem without any reference to the V4L2 subsystem. Then set V4L2_MBUS_FMT definitions to the MEDIA_BUS_FMT values using the V4L2_MBUS_FROM_MEDIA_BUS_FMT macro. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by:
-
