- 13 Jul, 2018 15 commits
-
-
Ville Syrjälä authored
Add intel_encoder_is_dig_port() to match intel_encoder_is_dp(). Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180705164357.28512-3-ville.syrjala@linux.intel.comReviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Ville Syrjälä authored
Add a convenience macro for iterating DP encoders. Signed-off-by:
-
Chris Wilson authored
On gen8 and onwards, we can mark GPU accesses through the ppGTT as being read-only, that is cause any GPU write onto that page to be discarded (not triggering a fault). This is all that we need to finally support the read-only flag for userptr! v2: Check default address space for read only support as a proxy for the user context/ppgtt. Testcase: igt/gem_userptr_blits/readonly* Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by:
Jon Bloomfield <jon.bloomfield@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180712191430.9269-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
If the user created a read-only object, they should not be allowed to circumvent the write protection using the pwrite ioctl. Signed-off-by:
-
Chris Wilson authored
If the user has created a read-only object, they should not be allowed to circumvent the write protection by using a GGTT mmapping. Deny it. Also most machines do not support read-only GGTT PTEs, so again we have to reject attempted writes. Fortunately, this is known a priori, so we can at least reject in the call to create the mmap (with a sanity check in the fault handler). v2: Check the vma->vm_flags during mmap() to allow readonly access. v3: Remove VM_MAYWRITE to curtail mprotect() Testcase: igt/gem_userptr_blits/readonly_mmap* Signed-off-by:
-
Chris Wilson authored
GVT is not propagating the PTE bits, and is always setting the read-write bit, thus breaking read-only support. Signed-off-by:
-
Jon Bloomfield authored
Hook up the flags to allow read-only ppGTT mappings for gen8+ v2: Include a selftest to check that writes to a readonly PTE are dropped v3: Don't duplicate cpu_check() as we can just reuse it, and even worse don't wholesale copy the theory-of-operation comment from igt_ctx_exec without changing it to explain the intention behind the new test! v4: Joonas really likes magic mystery values Signed-off-by:
-
Jon Bloomfield authored
We can set a bit inside the ppGTT PTE to indicate a page is read-only; writes from the GPU will be discarded. We can use this to protect pages and in particular support read-only userptr mappings (necessary for importing PROT_READ vma). Signed-off-by:
-
Clint Taylor authored
On GLK NUC platforms the HDMI retiming buffer needs additional disabled time to correctly sync to a faster incoming signal. When measured on a scope the highspeed lines of the HDMI clock turn off for ~400uS during a normal resolution change. The HDMI retimer on the GLK NUC appears to require at least a full frame of quiet time before a new faster clock can be correctly sync'd. Wait 100ms due to msleep inaccuracies while waiting for a completed frame. Add a quirk to the driver for GLK boards that use ITE66317 HDMI retimers. V2: Add more devices to the quirk list V3: Delay increased to 100ms, check to confirm crtc type is HDMI. V4: crtc type check extended to include _DDI and whitespace fixes v5: Fix white spaces, remove the macro for delay. Revert the crtc type check introduced in v4. Cc: Imre Deak <imre.deak@intel.com> Cc: <stable@vger.kernel.org> # v4.14+ Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105887Signed-off-by:Clint Taylor <clinton.a.taylor@intel.com> Tested-by:
Daniel Scheller <d.scheller.oss@gmail.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Chris Wilson authored
After aborting a module load, we may try and disable guc before we have finished setting it. Long term plan is to ensure perfect onion unwind, but in the short term we want to fix the oops to re-enable drv_module_reload. [ 317.401239] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 [ 317.401279] Oops: 0000 [#1] PREEMPT SMP PTI [ 317.401294] CPU: 5 PID: 4275 Comm: drv_module_relo Tainted: G U 4.18.0-rc4-CI-CI_DRM_4476+ #1 [ 317.401317] Hardware name: System manufacturer System Product Name/Z170M-PLUS, BIOS 3610 03/29/2018 [ 317.401440] RIP: 0010:unreserve_doorbell+0x0/0x80 [i915] [ 317.401454] Code: bb e0 48 8b 35 21 4d 18 00 49 c7 c0 a8 e5 62 a0 b9 cc 00 00 00 48 c7 c2 d8 41 5f a0 48 c7 c7 c9 f6 53 a0 e8 a2 3d c2 e0 0f 0b <0f> b7 47 30 66 3d 00 01 74 20 48 8b 57 18 48 0f a3 82 40 05 00 00 [ 317.401602] RSP: 0018:ffffc900003d3da0 EFLAGS: 00010246 [ 317.401619] RAX: ffffffff8223b300 RBX: 0000000000000000 RCX: 0000000000000000 [ 317.401636] RDX: 0000001fffffffc0 RSI: ffff880219f115f0 RDI: 0000000000000000 [ 317.401654] RBP: ffff880219f11838 R08: 0000000000000000 R09: 0000000000000000 [ 317.401671] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880219f11300 [ 317.401689] R13: ffff880219f17770 R14: ffff88022c1daef8 R15: ffffffffa06ae950 [ 317.401707] FS: 00007febf77a9980(0000) GS:ffff880236d40000(0000) knlGS:0000000000000000 [ 317.401727] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 317.401743] CR2: 0000000000000030 CR3: 0000000222072003 CR4: 00000000003606e0 [ 317.401761] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 317.401779] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 317.401796] Call Trace: [ 317.401894] guc_client_free+0x9/0x130 [i915] [ 317.401993] intel_guc_submission_fini+0x50/0x90 [i915] [ 317.402092] intel_uc_fini+0x34/0xd0 [i915] [ 317.402179] i915_gem_fini+0x5c/0x100 [i915] [ 317.402249] i915_driver_unload+0xd2/0x110 [i915] [ 317.402321] i915_pci_remove+0x10/0x20 [i915] [ 317.402341] pci_device_remove+0x36/0xb0 [ 317.402357] device_release_driver_internal+0x185/0x250 [ 317.402374] driver_detach+0x35/0x70 [ 317.402390] bus_remove_driver+0x53/0xd0 [ 317.402404] pci_unregister_driver+0x25/0xa0 [ 317.402423] __se_sys_delete_module+0x162/0x210 [ 317.402439] ? do_syscall_64+0xd/0x190 [ 317.402454] do_syscall_64+0x55/0x190 [ 317.402470] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 317.402485] RIP: 0033:0x7febf6e5d1b7 [ 317.402496] Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48 [ 317.402646] RSP: 002b:00007fffb5e72798 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 317.402667] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007febf6e5d1b7 [ 317.402686] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000562da1addd98 [ 317.402703] RBP: 0000562da1addd30 R08: 0000562da1addd9c R09: 00007fffb5e727d8 [ 317.402721] R10: 00007fffb5e71794 R11: 0000000000000206 R12: 0000562da0ff6470 Testcase: igt/drv_module_reload/basic-reload-inject Signed-off-by:
-
Rodrigo Vivi authored
Signed-off-by: -
Rodrigo Vivi authored
Reduce the module parameter to enable or disable. The link stand by vs full link off was used only once. And it was actually masking another bug fixed by commit '84bb2916 ("drm/i915/psr: Check for SET_POWER_CAPABLE bit at PSR init time.")' So, let's remove these options for now. End goal is to fully remove the mod param, moving it to a debugfs interface in upcoming patches. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Tarun Vyas <tarun.vyas@intel.com> Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180712052715.8177-1-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
PSR is no longer supported on VLV/CHV so this is just dead code. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180711220050.21809-1-rodrigo.vivi@intel.com
-
Dhinakaran Pandiyan authored
This allows to read i915_edp_psr_status from tests without triggering any AUX communication. Take this opportunity to move this under the eDP-1 connector directory as the status we print is of the sink. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Suggested-by:
-
Tarun Vyas authored
In commit "drm/i915: Wait for PSR exit before checking for vblank evasion", the idea was to limit the PSR IDLE checks when PSR is actually supported. While CAN_PSR does do that check, it doesn't applies on a per-crtc basis. crtc_state->has_psr is a more granular check that only applies to pipe(s) that have PSR enabled. Without the has_psr check, we end up waiting on the eDP transcoder's PSR_STATUS register irrespective of whether the pipe being updated is driving it or not. v2: Remove unnecessary parantheses, make checkpatch happy. v3: Move the has_psr check to intel_psr_wait_for_idle and commit message changes (DK). v4: Derive dev_priv from intel_crtc_state (DK) v5: Commit message changes to reflect the HW behavior (DK) Fixes: a6089879 ("drm/i915: Wait for PSR exit before checking for vblank evasion") Reviewed-by:Tarun Vyas <tarun.vyas@intel.com> Signed-off-by:
-
- 12 Jul, 2018 8 commits
-
-
Ramalingam C authored
Support for Burst read in HW is added for HDCP2.2 compliance requirement. This patch enables the burst read for all the gmbus read of more than 511Bytes, on capable platforms. v2: Extra line is removed. v3: Macro is added for detecting the BURST_READ Support [Jani] Runtime detection of the need for burst_read [Jani] Calculation enhancement. v4: GMBUS0 reg val is passed from caller [ville] Removed a extra var [ville] Extra brackets are removed [ville] Implemented the handling of 512Bytes Burst Read. v5: Burst read max length is fixed at 767Bytes [Ville] v6: Collecting the received reviewed-by. Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1530192889-5789-3-git-send-email-ramalingam.c@intel.com
-
Ramalingam C authored
GMBUS HW supports 511Bytes as Max Bytes per single RD/WR op. Instead of enabling the 511Bytes per RD/WR cycle on legacy platforms for no absolute ROIs, this change allows the max bytes per op upto 511Bytes from Gen9 onwards. v2: No Change. v3: Inline function for max_xfer_size and renaming of the macro.[Jani] v4: Extra brackets removed [ville] Commit msg is modified. v5: Collecting the Reviewed-By received. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Michał Winiarski authored
Since: 0d4b78b3 ("drm/i915/guc: Assert we have the doorbell before setting it up") We have asserts in GuC doorbell related functions, which is a good thing. Unfortunately, we were using those to check whether GuC FW is refusing to allocate invalid doorbell - which makes the test fail. Well, it would make the test WARN, except we fumbled cleanup ordering and eat the BUG_ON instead. Let's keep the asserts and use the internal implementation in the test. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107186Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Reviewed-by:
-
Michał Winiarski authored
Let's reorder things so that we can do onion teardown rather than double goto. References: b96f6ebf ("drm/i915: Correctly handle error path in i915_gem_init_hw") Signed-off-by:
-
Chris Wilson authored
If we fail the module load, we may try and cleanup before we even allocate the GuC clients. KISS in order to try and re-enable drv_module_reload for BAT. Testcase: igt/drv_module_reload/basic-reload-inject Signed-off-by:
-
Chris Wilson authored
Along a module load error path, we may try to cleanup the powercontext even before we have allocated it. Reorganising GT powermanagement is an on going process, so for simplicity handle it. [ 522.733832] WARN_ON(!dev_priv->vlv_pctx) [ 522.733986] WARNING: CPU: 1 PID: 3856 at drivers/gpu/drm/i915/intel_pm.c:7350 intel_cleanup_gt_powersave+0x5f/0x70 [i915] [ 522.733991] Modules linked in: i915(+) vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic btusb btrtl btbcm btintel intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul bluetooth snd_hda_codec ghash_clmulni_intel snd_hwdep snd_hda_core ecdh_generic lpc_ich r8169 snd_pcm mii i2c_hid prime_numbers [last unloaded: i915] [ 522.734105] CPU: 1 PID: 3856 Comm: drv_module_relo Tainted: G U 4.18.0-rc4-CI-CI_DRM_4474+ #1 [ 522.734110] Hardware name: \xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff \xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff/DN2820FYK, BIOS FYBYT10H.86A.0059.2017.0607.2130 06/07/2017 [ 522.734193] RIP: 0010:intel_cleanup_gt_powersave+0x5f/0x70 [i915] [ 522.734197] Code: 00 74 0d 48 c7 83 68 a6 00 00 00 00 00 00 eb c8 e8 36 6f 37 e1 eb ec 48 c7 c6 c5 7a 3d a0 48 c7 c7 b5 78 3d a0 e8 71 04 e0 e0 <0f> 0b eb aa 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f3 c3 0f 1f 40 [ 522.734445] RSP: 0018:ffffc900004f3af0 EFLAGS: 00010282 [ 522.734453] RAX: 0000000000000000 RBX: ffff880106360000 RCX: 0000000000000001 [ 522.734458] RDX: 0000000080000001 RSI: ffffffff820c65c4 RDI: 00000000ffffffff [ 522.734463] RBP: ffff880106360000 R08: 000000009f79baee R09: 0000000000000000 [ 522.734467] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88013b3133f8 [ 522.734472] R13: 00000000ffffffed R14: ffff880106360d58 R15: ffff88013b3133f8 [ 522.734477] FS: 00007f43f70af980(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000 [ 522.734481] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 522.734486] CR2: 000055a13a787580 CR3: 00000001325e6000 CR4: 00000000001006e0 [ 522.734490] Call Trace: [ 522.734595] intel_modeset_cleanup+0xcf/0x140 [i915] [ 522.734682] i915_driver_load+0xc85/0x10a0 [i915] [ 522.734694] ? _raw_spin_unlock_irqrestore+0x4c/0x60 [ 522.734703] ? trace_hardirqs_on_caller+0xe0/0x1b0 [ 522.734790] i915_pci_probe+0x29/0x90 [i915] [ 522.734801] pci_device_probe+0xa1/0x130 [ 522.734813] driver_probe_device+0x306/0x480 [ 522.734824] __driver_attach+0xdb/0x100 [ 522.734830] ? driver_probe_device+0x480/0x480 [ 522.734836] ? driver_probe_device+0x480/0x480 [ 522.734844] bus_for_each_dev+0x74/0xc0 [ 522.734855] bus_add_driver+0x15f/0x250 [ 522.734863] ? 0xffffffffa0793000 [ 522.734870] driver_register+0x56/0xe0 [ 522.734877] ? 0xffffffffa0793000 [ 522.734883] do_one_initcall+0x58/0x370 [ 522.734893] ? do_init_module+0x1d/0x1ea [ 522.734900] ? rcu_read_lock_sched_held+0x6f/0x80 [ 522.734906] ? kmem_cache_alloc_trace+0x282/0x2e0 [ 522.734918] do_init_module+0x56/0x1ea [ 522.734927] load_module+0x2435/0x2b20 [ 522.734965] ? __se_sys_finit_module+0xd3/0xf0 [ 522.734972] __se_sys_finit_module+0xd3/0xf0 [ 522.734995] do_syscall_64+0x55/0x190 [ 522.735003] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 522.735009] RIP: 0033:0x7f43f675d839 [ 522.735014] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48 [ 522.735260] RSP: 002b:00007ffe69384238 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 522.735269] RAX: ffffffffffffffda RBX: 000056100e387090 RCX: 00007f43f675d839 [ 522.735273] RDX: 0000000000000000 RSI: 000056100e37bff0 RDI: 0000000000000003 [ 522.735278] RBP: 000056100e37bff0 R08: 0000000000000000 R09: 0000000000000000 [ 522.735282] R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000 [ 522.735286] R13: 000056100e37c890 R14: 0000000000000020 R15: 0000000000000027 [ 522.735309] irq event stamp: 1389594 [ 522.735316] hardirqs last enabled at (1389593): [<ffffffff810f896c>] console_unlock+0x3fc/0x600 [ 522.735323] hardirqs last disabled at (1389594): [<ffffffff81a0111c>] error_entry+0x7c/0x100 [ 522.735329] softirqs last enabled at (13893567): [<ffffffff81c0034f>] __do_softirq+0x34f/0x505 [ 522.735336] softirqs last disabled at (1389335): [<ffffffff8108c7b9>] irq_exit+0xa9/0xc0 [ 522.735432] WARNING: CPU: 1 PID: 3856 at drivers/gpu/drm/i915/intel_pm.c:7350 intel_cleanup_gt_powersave+0x5f/0x70 [i915] Testcase: igt/drv_module_reload/basic-reload-inject Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180712105454.16091-1-chris@chris-wilson.co.uk
-
Dominique Martinet authored
Change it to use strlcpy instead Signed-off-by:
Dominique Martinet <asmadeus@codewreck.org> Reviewed-by:
-
https://github.com/intel/gvt-linuxRodrigo Vivi authored
gvt-next-2018-07-11 - vGPU huge page support (Changbin) - BXT display irq warning fix (Colin) - Handle GVT dependency well (Henry) Signed-off-by:
-
- 11 Jul, 2018 3 commits
-
-
Chris Wilson authored
The kernel recently gained an augmented rbtree with the purpose of cacheing the leftmost element of the rbtree, a frequent optimisation to avoid calls to rb_first() which is also employed by the execlists->queue. Switch from our open-coded cache to the library. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180629075348.27358-9-chris@chris-wilson.co.uk
-
Chris Wilson authored
Since live_workarounds poke around the w/a registers and checks to see if they survive across a reset, we are prone to fouling the machine and leaving it in a non-recoverable state. Wrap the probe inside a timeout to abort the test if the reset fails. v2: Include GEM_TRACE on declaring wedged. v3: Add a few includes to make the header look standalone. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107188Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180711122952.18448-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Add a mutex into struct i915_address_space to be used while operating on the vma and their lists for a particular vm. As this may be called from the shrinker, we taint the mutex with fs_reclaim so that from the start lockdep warns us if we are caught holding the mutex across an allocation. (With such small steps we will eventually rid ourselves of struct_mutex recursion!) Signed-off-by:
-
- 10 Jul, 2018 11 commits
-
-
Paulo Zanoni authored
Now that our stolen memory is already reserved by the x86 subsystem (since commit "x86/gpu: reserve ICL's graphics stolen memory"), make use of it. Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: x86@kernel.org Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
-
Paulo Zanoni authored
ICL changes the registers and addresses to 64 bits. I also briefly looked at implementing an u64 version of the PCI config read functions, but I concluded this wouldn't be trivial, so it's not worth doing it for a single user that can't have any racing problems while reading the register in two separate operations. v2: - Scrub the development (non-public) changelog (Joonas). - Remove the i915.ko bits so this can be easily backported in order to properly avoid stolen memory even on machines without i915.ko (Joonas). - CC stable for the reasons above. Issue: VIZ-9250 CC: stable@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: x86@kernel.org Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Chris Wilson authored
Following intel_gvt_init() failure, we missed unwinding our setup leaving pointers dangling past the module unload. For our example, the pm_qos: [ 441.057615] top: 000000006b3baf1c, n: 0000000054d8ef33, p: 0000000097cdf1a2 prev: 0000000054d8ef33, n: 0000000097cdf1a2, p: 000000006b3baf1c next: 0000000097cdf1a2, n: 000000006de8fc8b, p: 0000000081087253 [ 441.057627] WARNING: CPU: 4 PID: 9277 at lib/plist.c:42 plist_check_prev_next+0x2d/0x40 [ 441.057628] Modules linked in: i915(+) vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core e1000e snd_pcm mei_me mei prime_numbers [last unloaded: i915] [ 441.057652] CPU: 4 PID: 9277 Comm: drv_selftest Tainted: G U 4.18.0-rc4-CI-CI_DRM_4464+ #1 [ 441.057653] Hardware name: System manufacturer System Product Name/Z170 PRO GAMING, BIOS 3402 04/26/2017 [ 441.057656] RIP: 0010:plist_check_prev_next+0x2d/0x40 [ 441.057657] Code: 08 48 39 f0 74 2b 49 89 f0 48 8b 4f 08 50 ff 32 52 48 89 fe 41 ff 70 08 48 8b 17 48 c7 c7 d8 ae 14 82 4d 8b 08 e8 63 0e 76 ff <0f> 0b 48 83 c4 20 c3 48 39 10 75 d0 f3 c3 0f 1f 44 00 00 41 54 55 [ 441.057717] RSP: 0018:ffffc900003a3a68 EFLAGS: 00010082 [ 441.057720] RAX: 0000000000000000 RBX: ffff8802193978c0 RCX: 0000000000000002 [ 441.057721] RDX: 0000000080000002 RSI: ffffffff820c65a4 RDI: 00000000ffffffff [ 441.057722] RBP: ffff8802193978c0 R08: 0000000000000000 R09: 0000000000000001 [ 441.057724] R10: ffffc900003a3a70 R11: 0000000000000000 R12: ffffffff82243de0 [ 441.057725] R13: ffffffff82243de0 R14: ffff88021a6c78c0 R15: 0000000077359400 [ 441.057726] FS: 00007fc23a4a9980(0000) GS:ffff880236d00000(0000) knlGS:0000000000000000 [ 441.057728] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 441.057729] CR2: 0000563e4503d038 CR3: 0000000138f86005 CR4: 00000000003606e0 [ 441.057730] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 441.057731] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 441.057732] Call Trace: [ 441.057736] plist_check_list+0x2e/0x40 [ 441.057738] plist_add+0x23/0x130 [ 441.057743] pm_qos_update_target+0x1bd/0x2f0 [ 441.057771] i915_driver_load+0xec4/0x1060 [i915] [ 441.057775] ? trace_hardirqs_on_caller+0xe0/0x1b0 [ 441.057800] i915_pci_probe+0x29/0x90 [i915] [ 441.057804] pci_device_probe+0xa1/0x130 [ 441.057807] driver_probe_device+0x306/0x480 [ 441.057810] __driver_attach+0xdb/0x100 [ 441.057812] ? driver_probe_device+0x480/0x480 [ 441.057813] ? driver_probe_device+0x480/0x480 [ 441.057816] bus_for_each_dev+0x74/0xc0 [ 441.057819] bus_add_driver+0x15f/0x250 [ 441.057821] ? 0xffffffffa0696000 [ 441.057823] driver_register+0x56/0xe0 [ 441.057825] ? 0xffffffffa0696000 [ 441.057827] do_one_initcall+0x58/0x370 [ 441.057830] ? do_init_module+0x1d/0x1ea [ 441.057832] ? rcu_read_lock_sched_held+0x6f/0x80 [ 441.057834] ? kmem_cache_alloc_trace+0x282/0x2e0 [ 441.057838] do_init_module+0x56/0x1ea [ 441.057841] load_module+0x2435/0x2b20 [ 441.057852] ? __se_sys_finit_module+0xd3/0xf0 [ 441.057854] __se_sys_finit_module+0xd3/0xf0 [ 441.057861] do_syscall_64+0x55/0x190 [ 441.057863] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 441.057865] RIP: 0033:0x7fc239d75839 [ 441.057866] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48 [ 441.057927] RSP: 002b:00007fffb7825d38 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 441.057930] RAX: ffffffffffffffda RBX: 0000563e45035dd0 RCX: 00007fc239d75839 [ 441.057931] RDX: 0000000000000000 RSI: 0000563e4502f8a0 RDI: 0000000000000004 [ 441.057932] RBP: 0000563e4502f8a0 R08: 0000000000000004 R09: 0000000000000000 [ 441.057933] R10: 00007fffb7825ea0 R11: 0000000000000246 R12: 0000000000000000 [ 441.057934] R13: 0000563e4502f690 R14: 0000000000000000 R15: 000000000000003f [ 441.057940] irq event stamp: 231338 [ 441.057943] hardirqs last enabled at (231337): [<ffffffff8193e3fc>] _raw_spin_unlock_irqrestore+0x4c/0x60 [ 441.057944] hardirqs last disabled at (231338): [<ffffffff8193e26d>] _raw_spin_lock_irqsave+0xd/0x50 [ 441.057947] softirqs last enabled at (231024): [<ffffffff81c0034f>] __do_softirq+0x34f/0x505 [ 441.057949] softirqs last disabled at (231005): [<ffffffff8108c7b9>] irq_exit+0xa9/0xc0 [ 441.057951] WARNING: CPU: 4 PID: 9277 at lib/plist.c:42 plist_check_prev_next+0x2d/0x40 v2: Add a load failure point to intel_gvt_init() so that we always exercise this path in future. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107129Signed-off-by: -
Chris Wilson authored
After handling a critical failure initialising GEM we need to unwind the modesetting setup. Testcase: igt/drv_module_reload/basic-reload-inject Signed-off-by:
-
Chris Wilson authored
On unwinding following a critical failure inside GEM init, we also need to be sure to flush the workers before unloading the module. Testcase: igt/drv_module_reload/basic-reload-inject Signed-off-by:
-
Chris Wilson authored
In the next patch, we will make a fairly minor change to flush outstanding resets before suspend. In order to keep churn to a minimum in that functional patch, we fix up the comments and coding style now. Signed-off-by:
-
Chris Wilson authored
Across a reset, the seqno (and thus hangcheck) should restart and the hangcheck naturally progress, for when it does not, we want to declare an emergency. Currently, we only detect if reset and reinit fails, but we do not detect if the call to reinit succeeds but the HW is fried - as we are resetting hangcheck on initialisation the engine. Remove that and rely on the natural progress to reset the hangcheck timer. References: e21b1413 ("drm/i915: Mark the hangcheck as idle when unparking the engines") References: 1fd00c0f ("drm/i915: Declare the driver wedged if hangcheck makes no progress") Signed-off-by:
-
Chris Wilson authored
In our swizzling selftests, we cannot predict the physical address of the target page (at least not simply!) and so skip bit17 swizzles. However, there are two bit17 swizzle modes and we only skipped one, with the second being observed on the lab gdg causing the test to fail, as soon as we hit a page with bit17 set in its address. Testcase: igt/drv_selftest/live_objects #gdg Signed-off-by:
-
Chris Wilson authored
Be pessimistic and presume that we actually allocate every page we exercise via the mock_gtt (e.g. for gvt). In which case we have to keep our working set under the available physical memory to prevent oom. Signed-off-by:
-
Chris Wilson authored
Error messages are intended to be addressed to the user; be clear, succinct, instructive and unambiguous. Adding the function name to that message does not add any information the user requires and in the process makes the message less clear. E.g. [ 245.539711] i915 0000:00:02.0: [drm:i915_gem_init [i915]] Failed to initialize GPU, declaring it wedged! becomes [ 245.539711] i915 0000:00:02.0: Failed to initialize GPU, declaring it wedged! Signed-off-by:
-
Hang Yuan authored
This helps initramfs builder and other tools to know the full dependencies of i915 and have gvt module loaded with i915. v2: add condition and change to pre-dependency (Chris) v3: move declaration to gvt.c. (Chris) v4: remove xengt (Zhenyu) Signed-off-by:
Hang Yuan <hang.yuan@linux.intel.com> Reviewed-by:
Zhenyu Wang <zhenyuw@linux.intel.com>
-
- 09 Jul, 2018 3 commits
-
-
Rodrigo Vivi authored
Signed-off-by: -
Chris Wilson authored
igt_mmap_offset_exhaustion() wants to test what happens when the mmap space is filled with zombie objects, objects discarded by userspace but still active on the GPU. As they are only protected by the active reference, we have to be certain that active reference is kept while we peek into our dangling pointer. That active reference should not be freed until we retire, but we do that retirement from a background thread. This leaves us with a subtle timing problem, exacerbated and highlighted by KASAN: <3>[ 132.380399] BUG: KASAN: use-after-free in drm_gem_create_mmap_offset+0x8c/0xd0 <3>[ 132.380430] Read of size 8 at addr ffff8801e13245f8 by task drv_selftest/5822 <4>[ 132.380470] CPU: 0 PID: 5822 Comm: drv_selftest Tainted: G U 4.18.0-rc3-g7ae7763aa2be-kasan_48+ #1 <4>[ 132.380473] Hardware name: Dell Inc. XPS 8300 /0Y2MRG, BIOS A06 10/17/2011 <4>[ 132.380475] Call Trace: <4>[ 132.380481] dump_stack+0x7c/0xbb <4>[ 132.380487] print_address_description+0x65/0x270 <4>[ 132.380493] kasan_report+0x25b/0x380 <4>[ 132.380497] ? drm_gem_create_mmap_offset+0x8c/0xd0 <4>[ 132.380503] drm_gem_create_mmap_offset+0x8c/0xd0 <4>[ 132.380584] i915_gem_object_create_mmap_offset+0x6d/0x100 [i915] <4>[ 132.380650] igt_mmap_offset_exhaustion+0x462/0x940 [i915] <4>[ 132.380714] ? i915_gem_close_object+0x740/0x740 [i915] <4>[ 132.380784] ? igt_gem_huge+0x269/0x3d0 [i915] <4>[ 132.380865] __i915_subtests+0x5a/0x160 [i915] <4>[ 132.380936] __run_selftests+0x1a2/0x2f0 [i915] <4>[ 132.381008] i915_live_selftests+0x4e/0x80 [i915] <4>[ 132.381071] i915_pci_probe+0xd8/0x1b0 [i915] <4>[ 132.381077] pci_device_probe+0x1c5/0x3a0 <4>[ 132.381087] driver_probe_device+0x6b6/0xcb0 <4>[ 132.381094] __driver_attach+0x22d/0x2c0 <4>[ 132.381100] ? driver_probe_device+0xcb0/0xcb0 <4>[ 132.381103] bus_for_each_dev+0x113/0x1a0 <4>[ 132.381108] ? check_flags.part.24+0x450/0x450 <4>[ 132.381112] ? subsys_dev_iter_exit+0x10/0x10 <4>[ 132.381123] bus_add_driver+0x38b/0x6e0 <4>[ 132.381131] driver_register+0x189/0x400 <4>[ 132.381136] ? 0xffffffffc12d8000 <4>[ 132.381140] do_one_initcall+0xa0/0x4c0 <4>[ 132.381145] ? initcall_blacklisted+0x180/0x180 <4>[ 132.381152] ? do_init_module+0x4a/0x54c <4>[ 132.381156] ? rcu_lockdep_current_cpu_online+0xdc/0x130 <4>[ 132.381161] ? kasan_unpoison_shadow+0x30/0x40 <4>[ 132.381169] do_init_module+0x1b5/0x54c <4>[ 132.381177] load_module+0x619e/0x9b70 <4>[ 132.381202] ? module_frob_arch_sections+0x20/0x20 <4>[ 132.381211] ? vfs_read+0x257/0x2f0 <4>[ 132.381214] ? vfs_read+0x257/0x2f0 <4>[ 132.381221] ? kernel_read+0x8b/0x130 <4>[ 132.381231] ? copy_strings_kernel+0x120/0x120 <4>[ 132.381244] ? __se_sys_finit_module+0x17c/0x1a0 <4>[ 132.381248] __se_sys_finit_module+0x17c/0x1a0 <4>[ 132.381252] ? __ia32_sys_init_module+0xa0/0xa0 <4>[ 132.381261] ? __se_sys_newstat+0x77/0xd0 <4>[ 132.381265] ? cp_new_stat+0x590/0x590 <4>[ 132.381269] ? kmem_cache_free+0x2f0/0x340 <4>[ 132.381285] do_syscall_64+0x97/0x400 <4>[ 132.381292] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4>[ 132.381295] RIP: 0033:0x7eff4af46839 <4>[ 132.381297] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48 <4>[ 132.381426] RSP: 002b:00007ffcd84f4cf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 <4>[ 132.381432] RAX: ffffffffffffffda RBX: 000055dfdeb429a0 RCX: 00007eff4af46839 <4>[ 132.381435] RDX: 0000000000000000 RSI: 000055dfdeb43670 RDI: 0000000000000004 <4>[ 132.381437] RBP: 000055dfdeb43670 R08: 0000000000000004 R09: 0000000000000000 <4>[ 132.381440] R10: 00007ffcd84f4e60 R11: 0000000000000246 R12: 0000000000000000 <4>[ 132.381442] R13: 000055dfdeb3bec0 R14: 0000000000000000 R15: 000000000000003b <3>[ 132.381466] Allocated by task 5822: <4>[ 132.381485] kmem_cache_alloc+0xdf/0x2e0 <4>[ 132.381546] i915_gem_object_create_internal+0x24/0x1e0 [i915] <4>[ 132.381609] igt_mmap_offset_exhaustion+0x257/0x940 [i915] <4>[ 132.381677] __i915_subtests+0x5a/0x160 [i915] <4>[ 132.381742] __run_selftests+0x1a2/0x2f0 [i915] <4>[ 132.381806] i915_live_selftests+0x4e/0x80 [i915] <4>[ 132.381865] i915_pci_probe+0xd8/0x1b0 [i915] <4>[ 132.381868] pci_device_probe+0x1c5/0x3a0 <4>[ 132.381871] driver_probe_device+0x6b6/0xcb0 <4>[ 132.381874] __driver_attach+0x22d/0x2c0 <4>[ 132.381877] bus_for_each_dev+0x113/0x1a0 <4>[ 132.381880] bus_add_driver+0x38b/0x6e0 <4>[ 132.381884] driver_register+0x189/0x400 <4>[ 132.381886] do_one_initcall+0xa0/0x4c0 <4>[ 132.381889] do_init_module+0x1b5/0x54c <4>[ 132.381892] load_module+0x619e/0x9b70 <4>[ 132.381895] __se_sys_finit_module+0x17c/0x1a0 <4>[ 132.381898] do_syscall_64+0x97/0x400 <4>[ 132.381901] entry_SYSCALL_64_after_hwframe+0x49/0xbe <3>[ 132.381914] Freed by task 150: <4>[ 132.381931] kmem_cache_free+0xb7/0x340 <4>[ 132.381995] __i915_gem_free_objects+0x875/0xf50 [i915] <4>[ 132.382054] __i915_gem_free_work+0x69/0xb0 [i915] <4>[ 132.382058] process_one_work+0x78b/0x1740 <4>[ 132.382061] worker_thread+0x82/0xb80 <4>[ 132.382064] kthread+0x30c/0x3d0 <4>[ 132.382067] ret_from_fork+0x3a/0x50 <3>[ 132.382081] The buggy address belongs to the object at ffff8801e1324500 which belongs to the cache drm_i915_gem_object of size 1168 <3>[ 132.382133] The buggy address is located 248 bytes inside of 1168-byte region [ffff8801e1324500, ffff8801e1324990) <3>[ 132.382179] The buggy address belongs to the page: <0>[ 132.382202] page:ffffea000784c800 count:1 mapcount:0 mapping:ffff8801dedf6500 index:0xffff8801e1323ec0 compound_mapcount: 0 <0>[ 132.382251] flags: 0x8000000000008100(slab|head) <1>[ 132.382274] raw: 8000000000008100 ffff8801d6317440 ffff8801d6317440 ffff8801dedf6500 <1>[ 132.382307] raw: ffff8801e1323ec0 0000000000140013 00000001ffffffff 0000000000000000 <1>[ 132.382339] page dumped because: kasan: bad access detected <3>[ 132.382373] Memory state around the buggy address: <3>[ 132.382395] ffff8801e1324480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc <3>[ 132.382426] ffff8801e1324500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb <3>[ 132.382457] >ffff8801e1324580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb <3>[ 132.382488] ^ <3>[ 132.382517] ffff8801e1324600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb <3>[ 132.382548] ffff8801e1324680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb This patch tricks the system into running without the background retire thread, until after we finish the test. The only reaping should then be performed by the mmap offset routine to reclaim the space as required. Signed-off-by: -
Chris Wilson authored
In igt_flush_test() we install a background timer in order to ensure that the wait completes within a certain time. We can now tell the wait that it has to complete within a timeout, and so no longer need the background timer. Signed-off-by:
-
