Pull regulator fixes from Mark Brown:
 "A couple of fixes for the rt4831 driver which fix features that didn't
  work due to incomplete description of the register configuration"

* tag 'regulator-fix-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: rt4831: Add active_discharge_on to fix discharge API
  regulator: rt4831: Add bypass mask to fix set_bypass API work

Pull dmaengine updates from Vinod Koul:
 "This time we have bunch of driver updates and some new device support.

  New support:
   - Document RZ/V2L and RZ/G2UL dma binding
   - TI AM62x k3-udma and k3-psil support

  Updates:
   - Yaml conversion for Mediatek uart apdma schema
   - Removal of DMA-32 fallback configuration for various drivers
   - imx-sdma updates for channel restart"

* tag 'dmaengine-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (23 commits)
  dmaengine: hisi_dma: fix MSI allocate fail when reload hisi_dma
  dmaengine: dw-axi-dmac: cleanup comments
  dmaengine: fsl-dpaa2-qdma: Drop comma after SoC match table sentinel
  dt-bindings: dma: Convert mtk-uart-apdma to DT schema
  dmaengine: ppc4xx: Make use of the helper macro LIST_HEAD()
  dmaengine: idxd: Remove useless DMA-32 fallback configuration
  dmaengine: qcom_hidma: Remove useless DMA-32 fallback configuration
  dmaengine: sh: Kconfig: Add ARCH_R9A07G054 dependency for RZ_DMAC config option
  dmaengine: ti: k3-psil: Add AM62x PSIL and PDMA data
  dmaengine: ti: k3-udma: Add AM62x DMSS support
  dmaengine: ti: cleanup comments
  dmaengine: imx-sdma: clean up some inconsistent indenting
  dmaengine: Revert "dmaengine: shdma: Fix runtime PM imbalance on error"
  dmaengine: idxd: restore traffic class defaults after wq reset
  dmaengine: altera-msgdma: Remove useless DMA-32 fallback configuration
  dmaengine: stm32-dma: set dma_device max_sg_burst
  dmaengine: imx-sdma: fix cyclic buffer race condition
  dmaengine: imx-sdma: restart cyclic channel if needed
  dmaengine: iot: Remove useless DMA-32 fallback configuration
  dmaengine: ptdma: handle the cases based on DMA is complete
  ...

Pull remoteproc updates from Bjorn Andersson:
 "In the remoteproc core, it's now possible to mark the sysfs attributes
  read only on a per-instance basis, which is then used by the TI wkup
  M3 driver.

  Also, the rproc_shutdown() interface propagates errors to the caller
  and an array underflow is fixed in the debugfs interface. The
  rproc_da_to_va() API is moved to the public API to allow e.g. child
  rpmsg devices to acquire pointers to memory shared with the remote
  processor.

  The TI K3 R5F and DSP drivers gains support for attaching to instances
  already started by the bootloader, aka IPC-only mode.

  The Mediatek remoteproc driver gains support for the MT8186 SCP. The
  driver's probe function is reordered and moved to use the devres
  version of rproc_alloc() to save a few gotos. The driver's probe
  function is also transitioned to use dev_err_probe() to provide better
  debug support.

  Support for the Qualcomm SC7280 Wireless Subsystem (WPSS) is
  introduced. The Hexagon based remoteproc drivers gains support for
  voting for interconnect bandwidth during launch of the remote
  processor. The modem subsystem (MSS) driver gains support for probing
  the BAM-DMUX driver, which provides the network interface towards the
  modem on a set of older Qualcomm platforms. In addition a number a bug
  fixes are introduces in the Qualcomm drivers.

  Lastly Qualcomm ADSP DeviceTree binding is converted to YAML format,
  to allow validation of DeviceTree source files"

* tag 'rproc-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (22 commits)
  remoteproc: qcom_q6v5_mss: Create platform device for BAM-DMUX
  remoteproc: qcom: q6v5_wpss: Add support for sc7280 WPSS
  dt-bindings: remoteproc: qcom: Add SC7280 WPSS support
  dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML
  remoteproc: k3-dsp: Add support for IPC-only mode for all K3 DSPs
  remoteproc: k3-dsp: Refactor mbox request code in start
  remoteproc: k3-r5: Add support for IPC-only mode for all R5Fs
  remoteproc: k3-r5: Refactor mbox request code in start
  remoteproc: Change rproc_shutdown() to return a status
  remoteproc: qcom: q6v5: Add interconnect path proxy vote
  remoteproc: mediatek: Support mt8186 scp
  dt-bindings: remoteproc: mediatek: Add binding for mt8186 scp
  remoteproc: qcom_q6v5_mss: Fix some leaks in q6v5_alloc_memory_region
  remoteproc: qcom_wcnss: Add missing of_node_put() in wcnss_alloc_memory_region
  remoteproc: qcom: Fix missing of_node_put in adsp_alloc_memory_region
  remoteproc: move rproc_da_to_va declaration to remoteproc.h
  remoteproc: wkup_m3: Set sysfs_read_only flag
  remoteproc: Introduce sysfs_read_only flag
  remoteproc: Fix count check in rproc_coredump_write()
  remoteproc: mtk_scp: Use dev_err_probe() where possible
  ...

Pull hwspinlock updates from Bjorn Andersson:
 "This updates sprd and srm32 drivers to use struct_size() instead of
  their open-coded equivalents. It also cleans up the omap dt-bindings
  example"

* tag 'hwlock-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  hwspinlock: sprd: Use struct_size() helper in devm_kzalloc()
  hwspinlock: stm32: Use struct_size() helper in devm_kzalloc()
  dt-bindings: hwlock: omap: Remove redundant binding example

Pull rpmsg updates from Bjorn Andersson:
 "The major part of the rpmsg changes for v5.18 relates to improvements
  in the rpmsg char driver, which now allow automatically attaching to
  rpmsg channels as well as initiating new communication channels from
  the Linux side.

  The SMD driver is moved to arch_initcall with the purpose of
  registering root clocks earlier during boot.

  Also in the SMD driver, a workaround for the resource power management
  (RPM) channel is introduced to resolve an issue where both the RPM and
  Linux side waits for the other to close the communication established
  by the bootloader - this unblocks support for clocks and regulators on
  some older Qualcomm platforms"

* tag 'rpmsg-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  rpmsg: ctrl: Introduce new RPMSG_CREATE/RELEASE_DEV_IOCTL controls
  rpmsg: char: Introduce the "rpmsg-raw" channel
  rpmsg: char: Add possibility to use default endpoint of the rpmsg device
  rpmsg: char: Refactor rpmsg_chrdev_eptdev_create function
  rpmsg: Update rpmsg_chrdev_register_device function
  rpmsg: Move the rpmsg control device from rpmsg_char to rpmsg_ctrl
  rpmsg: Create the rpmsg class in core instead of in rpmsg char
  rpmsg: char: Export eptdev create and destroy functions
  rpmsg: char: treat rpmsg_trysend() ENOMEM as EAGAIN
  rpmsg: qcom_smd: Fix redundant channel->registered assignment
  rpmsg: use struct_size over open coded arithmetic
  rpmsg: smd: allow opening rpm_requests even if already opened
  rpmsg: qcom_smd: Promote to arch_initcall

Pull i3c updates from Alexandre Belloni:

 - support dynamic addition of i2c devices

* tag 'i3c/for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: fix uninitialized variable use in i2c setup
  i3c: support dynamically added i2c devices
  i3c: remove i2c board info from i2c_dev_desc

Pull clk updates from Stephen Boyd:
 "There's one large change in the core clk framework here. We change how
  clk_set_rate_range() works so that the frequency is re-evaulated each
  time the rate is changed. Previously we wouldn't let clk providers see
  a rate that was different if it was still within the range, which
  could be bad for power if the clk could run slower when a range
  expands. Now the clk provider can decide to do something differently
  when the constraints change. This broke Nvidia's clk driver so we had
  to wait for the fix for that to bake a little more in -next.

  The rate range patch series also introduced a kunit suite for the clk
  framework that we're going to extend in the next release. It already
  made it easy to find corner cases in the rate range patches so I'm
  excited to see it cover more clk code and increase our confidence in
  core framework patches in the future. I also added a kunit test for
  the basic clk gate code and that work will continue to cover more
  basic clk types: muxes, dividers, etc.

  Beyond the core code we have the usual set of clk driver updates and
  additions. Qualcomm again dominates the diffstat here with lots more
  SoCs being supported and i.MX follows afer that with a similar number
  of SoCs gaining clk drivers. Beyond those large additions there's
  drivers being modernized to use clk_parent_data so we can move away
  from global string names for all the clks in an SoC. Finally there's
  lots of little fixes all over the clk drivers for typos, warnings, and
  missing clks that aren't critical and get batched up waiting for the
  next merge window to open. Nothing super big stands out in the driver
  pile. Full details are below.

  Core:
   - Make clk_set_rate_range() re-evaluate the limits each time
   - Introduce various clk_set_rate_range() tests
   - Add clk_drop_range() to drop a previously set range

  New Drivers:
   - i.MXRT1050 clock driver and bindings
   - i.MX8DXL clock driver and bindings
   - i.MX93 clock driver and bindings
   - NCO blocks on Apple SoCs
   - Audio clks on StarFive JH7100 RISC-V SoC
   - Add support for the new Renesas RZ/V2L SoC
   - Qualcomm SDX65 A7 PLL
   - Qualcomm SM6350 GPU clks
   - Qualcomm SM6125, SM6350, QCS2290 display clks
   - Qualcomm MSM8226 multimedia clks

  Updates:
   - Kunit tests for clk-gate implementation
   - Terminate arrays with sentinels and make that clearer
   - Cleanup SPDX tags
   - Fix typos in comments
   - Mark mux table as const in clk-mux
   - Make the all_lists array const
   - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding
     and add support for dynamic mode
   - Clock configuration on Microchip PolarFire SoCs
   - Free allocations on probe error in Mediatek clk driver
   - Modernize Mediatek clk driver by consolidating code
   - Add watchdog (WDT), I2C, and pin function controller (PFC) clocks
     on Renesas R-Car S4-8
   - Improve the clocks for the Rockchip rk3568 display outputs
     (parenting, pll-rates)
   - Use of_device_get_match_data() instead of open-coding on Rockchip
     rk3568
   - Reintroduce the expected fractional-divider behaviour that
     disappeared with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS
   - Remove SYS PLL 1/2 clock gates for i.MX8M*
   - Remove AUDIO MCLK ROOT from i.MX7D
   - Add fracn gppll clock type used by i.MX93
   - Add new composite clock for i.MX93
   - Add missing media mipi phy ref clock for i.MX8MP
   - Fix off by one in imx_lpcg_parse_clks_from_dt()
   - Rework for the imx pll14xx
   - sama7g5: One low priority fix for GCLK of PDMC
   - Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8
   - Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3
   - Add CAN-FD clocks on Renesas R-Car V3U
   - Qualcomm SC8280XP RPMCC
   - Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs
   - Rework Qualcomm GCC bindings and convert SDM845 camera bindig to
     YAML
   - Convert various Qualcomm drivers to use clk_parent_data
   - Remove test clocks from various Qualcomm drivers
   - Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS
   - Qualcomm SM8150 EMAC, PCIe, UFS GDSCs
   - Better pixel clk frequency support on Qualcomm RCG2 clks"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits)
  clk: zynq: Update the parameters to zynq_clk_register_periph_clk
  clk: zynq: trivial warning fix
  clk: Drop the rate range on clk_put()
  clk: test: Test clk_set_rate_range on orphan mux
  clk: Initialize orphan req_rate
  dt-bindings: clock: drop useless consumer example
  dt-bindings: clock: renesas: Make example 'clocks' parsable
  clk: qcom: gcc-msm8994: Fix gpll4 width
  dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml
  clk: rs9: Add Renesas 9-series PCIe clock generator driver
  clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index()
  clk: visconti: prevent array overflow in visconti_clk_register_gates()
  dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator
  clk: sifive: Move all stuff into SoCs header files from C files
  clk: sifive: Add SoCs prefix in each SoCs-dependent data
  riscv: dts: Change the macro name of prci in each device node
  dt-bindings: change the macro name of prci in header files and example
  clk: sifive: duplicate the macro definitions for the time being
  clk: qcom: sm6125-gcc: fix typos in comments
  clk: ti: clkctrl: fix typos in comments
  ...

Pull libnvdimm updates from Dan Williams:
 "The update for this cycle includes the deprecation of block-aperture
  mode and a new perf events interface for the papr_scm nvdimm driver.

  The perf events approach was acked by PeterZ.

   - Add perf support for nvdimm events, initially only for 'papr_scm'
     devices.

   - Deprecate the 'block aperture' support in libnvdimm, it only ever
     existed in the specification, not in shipping product"

* tag 'libnvdimm-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  nvdimm/blk: Fix title level
  MAINTAINERS: remove section LIBNVDIMM BLK: MMIO-APERTURE DRIVER
  powerpc/papr_scm: Fix build failure when
  drivers/nvdimm: Fix build failure when CONFIG_PERF_EVENTS is not set
  nvdimm/region: Delete nd_blk_region infrastructure
  ACPI: NFIT: Remove block aperture support
  nvdimm/namespace: Delete nd_namespace_blk
  nvdimm/namespace: Delete blk namespace consideration in shared paths
  nvdimm/blk: Delete the block-aperture window driver
  nvdimm/region: Fix default alignment for small regions
  docs: ABI: sysfs-bus-nvdimm: Document sysfs event format entries for nvdimm pmu
  powerpc/papr_scm: Add perf interface support
  drivers/nvdimm: Add perf interface to expose nvdimm performance stats
  drivers/nvdimm: Add nvdimm pmu structure

Jason Donenfeld reports that my commit 1c24a186 ("fs: fd tables have
to be multiples of BITS_PER_LONG") doesn't work, and the reason is an
embarrassing brown-paper-bag bug.

Yes, we want to align the number of fds to BITS_PER_LONG, and yes, the
reason they might not be aligned is because the incoming 'max_fd'
argument might not be aligned.

But aligining the argument - while simple - will cause a "infinitely
big" maxfd (eg NR_OPEN_MAX) to just overflow to zero.  Which most
definitely isn't what we want either.

The obvious fix was always just to do the alignment last, but I had
moved it earlier just to make the patch smaller and the code look
simpler.  Duh.  It certainly made _me_ look simple.

Fixes: 1c24a186 ("fs: fd tables have to be multiples of BITS_PER_LONG")
Reported-and-tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Fedor Pchelkin <aissur0002@gmail.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Features:

   - Switch NFS to use readahead instead of the obsolete readpages.

   - Readdir fixes to improve cacheability of large directories when
     there are multiple readers and writers.

   - Readdir performance improvements when doing a seekdir() immediately
     after opening the directory (common when re-exporting NFS).

   - NFS swap improvements from Neil Brown.

   - Loosen up memory allocation to permit direct reclaim and write back
     in cases where there is no danger of deadlocking the writeback code
     or NFS swap.

   - Avoid sillyrename when the NFSv4 server claims to support the
     necessary features to recover the unlinked but open file after
     reboot.

  Bugfixes:

   - Patch from Olga to add a mount option to control NFSv4.1 session
     trunking discovery, and default it to being off.

   - Fix a lockup in nfs_do_recoalesce().

   - Two fixes for list iterator variables being used when pointing to
     the list head.

   - Fix a kernel memory scribble when reading from a non-socket
     transport in /sys/kernel/sunrpc.

   - Fix a race where reconnecting to a server could leave the TCP
     socket stuck forever in the connecting state.

   - Patch from Neil to fix a shutdown race which can leave the SUNRPC
     transport timer primed after we free the struct xprt itself.

   - Patch from Xin Xiong to fix reference count leaks in the NFSv4.2
     copy offload.

   - Sunrpc patch from Olga to avoid resending a task on an offlined
     transport.

  Cleanups:

   - Patches from Dave Wysochanski to clean up the fscache code"

* tag 'nfs-for-5.18-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (91 commits)
  NFSv4/pNFS: Fix another issue with a list iterator pointing to the head
  NFS: Don't loop forever in nfs_do_recoalesce()
  SUNRPC: Don't return error values in sysfs read of closed files
  SUNRPC: Do not dereference non-socket transports in sysfs
  NFSv4.1: don't retry BIND_CONN_TO_SESSION on session error
  SUNRPC don't resend a task on an offlined transport
  NFS: replace usage of found with dedicated list iterator variable
  SUNRPC: avoid race between mod_timer() and del_timer_sync()
  pNFS/files: Ensure pNFS allocation modes are consistent with nfsiod
  pNFS/flexfiles: Ensure pNFS allocation modes are consistent with nfsiod
  NFSv4/pnfs: Ensure pNFS allocation modes are consistent with nfsiod
  NFS: Avoid writeback threads getting stuck in mempool_alloc()
  NFS: nfsiod should not block forever in mempool_alloc()
  SUNRPC: Make the rpciod and xprtiod slab allocation modes consistent
  SUNRPC: Fix unx_lookup_cred() allocation
  NFS: Fix memory allocation in rpc_alloc_task()
  NFS: Fix memory allocation in rpc_malloc()
  SUNRPC: Improve accuracy of socket ENOBUFS determination
  SUNRPC: Replace internal use of SOCKWQ_ASYNC_NOSPACE
  SUNRPC: Fix socket waits for write buffer space
  ...

Pull jfs updates from Dave Kleikamp:
 "A couple bug fixes"

* tag 'jfs-5.18' of https://github.com/kleikamp/linux-shaggy:
  jfs: prevent NULL deref in diFree
  jfs: fix divide error in dbNextAG

This has always been the rule: fdtables have several bitmaps in them,
and as a result they have to be sized properly for bitmaps.  We walk
those bitmaps in chunks of 'unsigned long' in serveral cases, but even
when we don't, we use the regular kernel bitops that are defined to work
on arrays of 'unsigned long', not on some byte array.

Now, the distinction between arrays of bytes and 'unsigned long'
normally only really ends up being noticeable on big-endian systems, but
Fedor Pchelkin and Alexey Khoroshilov reported that copy_fd_bitmaps()
could be called with an argument that wasn't even a multiple of
BITS_PER_BYTE.  And then it fails to do the proper copy even on
little-endian machines.

The bug wasn't in copy_fd_bitmap(), but in sane_fdtable_size(), which
didn't actually sanitize the fdtable size sufficiently, and never made
sure it had the proper BITS_PER_LONG alignment.

That's partly because the alignment historically came not from having to
explicitly align things, but simply from previous fdtable sizes, and
from count_open_files(), which counts the file descriptors by walking
them one 'unsigned long' word at a time and thus naturally ends up doing
sizing in the proper 'chunks of unsigned long'.

But with the introduction of close_range(), we now have an external
source of "this is how many files we want to have", and so
sane_fdtable_size() needs to do a better job.

This also adds that explicit alignment to alloc_fdtable(), although
there it is mainly just for documentation at a source code level.  The
arithmetic we do there to pick a reasonable fdtable size already aligns
the result sufficiently.

In fact,clang notices that the added ALIGN() in that function doesn't
actually do anything, and does not generate any extra code for it.

It turns out that gcc ends up confusing itself by combining a previous
constant-sized shift operation with the variable-sized shift operations
in roundup_pow_of_two().  And probably due to that doesn't notice that
the ALIGN() is a no-op.  But that's a (tiny) gcc misfeature that doesn't
matter.  Having the explicit alignment makes sense, and would actually
matter on a 128-bit architecture if we ever go there.

This also adds big comments above both functions about how fdtable sizes
have to have that BITS_PER_LONG alignment.

Fixes: 60997c3d ("close_range: add CLOSE_RANGE_UNSHARE")
Reported-by: Fedor Pchelkin <aissur0002@gmail.com>
Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Link: https://lore.kernel.org/all/20220326114009.1690-1-aissur0002@gmail.com/Tested-and-acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull device properties code update from Rafael Wysocki:
 "This is based on new i2c material for 5.18-rc1 and simply reorganizes
  the code on top of it so as to group similar functions together (Andy
  Shevchenko)"

* tag 'devprop-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  device property: Don't split fwnode_get_irq*() APIs in the code

Pull more power management updates from Rafael Wysocki:
 "These update ARM cpufreq drivers, the OPP (Operating Performance
  Points) library and the power management documentation.

  Specifics:

   - Add per core DVFS support for QCom SoC (Bjorn Andersson), convert
     to yaml binding (Manivannan Sadhasivam) and various other fixes to
     the QCom drivers (Luca Weiss).

   - Add OPP table for imx7s SoC (Denys Drozdov) and minor fixes (Stefan
     Agner).

   - Fix CPPC driver's freq/performance conversions (Pierre Gondois).

   - Minor generic cleanups (Yury Norov).

   - Introduce opp-microwatt property to the OPP core, bindings, etc
     (Lukasz Luba).

   - Convert DT bindings to schema format and various related fixes
     (Yassine Oudjana).

   - Expose OPP's OF node in debugfs (Viresh Kumar).

   - Add Intel uncore frequency scaling documentation file to its
     MAINTAINERS entry (Srinivas Pandruvada).

   - Clean up the AMD P-state driver documentation (Jan Engelhardt)"

* tag 'pm-5.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
  Documentation: amd-pstate: grammar and sentence structure updates
  dt-bindings: cpufreq: cpufreq-qcom-hw: Convert to YAML bindings
  dt-bindings: dvfs: Use MediaTek CPUFREQ HW as an example
  Documentation: EM: Describe new registration method using DT
  OPP: Add support of "opp-microwatt" for EM registration
  PM: EM: add macro to set .active_power() callback conditionally
  OPP: Add "opp-microwatt" supporting code
  dt-bindings: opp: Add "opp-microwatt" entry in the OPP
  MAINTAINERS: Add additional file to uncore frequency control
  cpufreq: blocklist Qualcomm sc8280xp and sa8540p in cpufreq-dt-platdev
  cpufreq: qcom-hw: Add support for per-core-dcvs
  dt-bindings: power: avs: qcom,cpr: Convert to DT schema
  arm64: dts: qcom: qcs404: Rename CPU and CPR OPP tables
  arm64: dts: qcom: msm8996: Rename cluster OPP tables
  dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema
  dt-bindings: opp: qcom-opp: Convert to DT schema
  arm64: dts: qcom: msm8996-mtp: Add msm8996 compatible
  dt-bindings: arm: qcom: Add msm8996 and apq8096 compatibles
  opp: Expose of-node's name in debugfs
  cpufreq: CPPC: Fix performance/frequency conversion
  ...

* clk-sifive:
  clk: sifive: Move all stuff into SoCs header files from C files
  clk: sifive: Add SoCs prefix in each SoCs-dependent data
  riscv: dts: Change the macro name of prci in each device node
  dt-bindings: change the macro name of prci in header files and example
  clk: sifive: duplicate the macro definitions for the time being

* clk-visconti:
  clk: visconti: prevent array overflow in visconti_clk_register_gates()

 - Make clk_set_rate_range() re-evaluate the limits each time
 - Introduce various clk_set_rate_range() tests
 - Add clk_drop_range() to drop a previously set range
 - Support for NCO blocks on Apple SoCs

* clk-range:
  clk: Drop the rate range on clk_put()
  clk: test: Test clk_set_rate_range on orphan mux
  clk: Initialize orphan req_rate
  clk: bcm: rpi: Run some clocks at the minimum rate allowed
  clk: bcm: rpi: Set a default minimum rate
  clk: bcm: rpi: Add variant structure
  clk: Add clk_drop_range
  clk: Always set the rate on clk_set_range_rate
  clk: Use clamp instead of open-coding our own
  clk: Always clamp the rounded rate
  clk: Enforce that disjoints limits are invalid
  clk: Introduce Kunit Tests for the framework
  clk: Fix clk_hw_get_clk() when dev is NULL

* clk-uniphier:
  clk: uniphier: Fix fixed-rate initialization

* clk-apple:
  clk: clk-apple-nco: Allow and fix module building
  MAINTAINERS: Add clk-apple-nco under ARM/APPLE MACHINE
  clk: clk-apple-nco: Add driver for Apple NCO
  dt-bindings: clock: Add Apple NCO

* clk-qcom: (61 commits)
  clk: qcom: gcc-msm8994: Fix gpll4 width
  dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml
  clk: qcom: Add display clock controller driver for SM6125
  dt-bindings: clock: add QCOM SM6125 display clock bindings
  clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and Kconfig
  clk: qcom: gcc: Add emac GDSC support for SM8150
  clk: qcom: gcc: sm8150: Fix some identation issues
  clk: qcom: gcc: Add UFS_CARD and UFS_PHY GDSCs for SM8150
  clk: qcom: gcc: Add PCIe0 and PCIe1 GDSC for SM8150
  clk: qcom: clk-rcg2: Update the frac table for pixel clock
  clk: qcom: clk-rcg2: Update logic to calculate D value for RCG
  clk: qcom: smd: Add missing MSM8998 RPM clocks
  clk: qcom: smd: Add missing RPM clocks for msm8992/4
  dt-bindings: clock: qcom: rpmcc: Add RPM Modem SubSystem (MSS) clocks
  clk: qcom: gcc-ipq806x: add CryptoEngine resets
  dt-bindings: reset: add ipq8064 ce5 resets
  clk: qcom: gcc-ipq806x: add CryptoEngine clocks
  dt-bindings: clock: add ipq8064 ce5 clk define
  clk: qcom: gcc-ipq806x: add additional freq for sdc table
  clk: qcom: clk-rcg: add clk_rcg_floor_ops ops
  ...

 - Audio clks on StarFive JH7100 RISC-V SoC
 - Terminate arrays with sentinels and make that clearer
 - Cleanup SPDX tags
 - Fix typos in comments

* clk-starfive:
  clk: starfive: Add JH7100 audio clock driver
  clk: starfive: jh7100: Support more clock types
  clk: starfive: jh7100: Make hw clock implementation reusable
  dt-bindings: clock: Add starfive,jh7100-audclk bindings
  dt-bindings: clock: Add JH7100 audio clock definitions
  clk: starfive: jh7100: Handle audio_div clock properly
  clk: starfive: jh7100: Don't round divisor up twice

* clk-ti:
  clk: ti: Drop legacy compatibility clocks for dra7
  clk: ti: Drop legacy compatibility clocks for am4
  clk: ti: Drop legacy compatibility clocks for am3
  clk: ti: Update component clocks to use ti_dt_clk_name()
  clk: ti: Update pll and clockdomain clocks to use ti_dt_clk_name()
  clk: ti: Add ti_dt_clk_name() helper to use clock-output-names
  clk: ti: Use clock-output-names for clkctrl
  clk: ti: Add ti_find_clock_provider() to use clock-output-names
  clk: ti: Optionally parse IO address from parent clock node
  clk: ti: Preserve node in ti_dt_clocks_register()
  clk: ti: Constify clkctrl_name

* clk-terminate:
  clk: actions: Make sentinel elements more obvious
  clk: clps711x: Terminate clk_div_table with sentinel element
  clk: hisilicon: Terminate clk_div_table with sentinel element
  clk: loongson1: Terminate clk_div_table with sentinel element
  clk: actions: Terminate clk_div_table with sentinel element

* clk-cleanup:
  clk: zynq: Update the parameters to zynq_clk_register_periph_clk
  clk: zynq: trivial warning fix
  clk: qcom: sm6125-gcc: fix typos in comments
  clk: ti: clkctrl: fix typos in comments
  clk: COMMON_CLK_LAN966X should depend on SOC_LAN966
  clk: Use of_device_get_match_data()
  clk: bcm2835: Remove unused variable
  clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver
  clk: cleanup comments
  clk: socfpga: cleanup spdx tags

 - Mark mux table as const in clk-mux
 - Make the all_lists array const

* clk-mvebu:
  clk: mvebu: use time_is_before_eq_jiffies() instead of open coding it

* clk-const:
  clk: Mark clk_core_evict_parent_cache_subtree() 'target' const
  clk: Mark 'all_lists' as const
  clk: pistachio: Declare mux table as const u32[]
  clk: qcom: Declare mux table as const u32[]
  clk: mmp: Declare mux tables as const u32[]
  clk: hisilicon: Remove unnecessary cast of mux table to u32 *
  clk: mux: Declare u32 *table parameter as const
  clk: nxp: Declare mux table parameter as const u32 *
  clk: nxp: Remove unused variable

* clk-imx: (28 commits)
  dt-bindings: clock: drop useless consumer example
  clk: imx: Select MXC_CLK for i.MX93 clock driver
  clk: imx: remove redundant re-assignment of pll->base
  MAINTAINERS: clk: imx: add git tree and dt-bindings files
  clk: imx: pll14xx: Support dynamic rates
  clk: imx: pll14xx: Add pr_fmt
  clk: imx: pll14xx: explicitly return lowest rate
  clk: imx: pll14xx: name variables after usage
  clk: imx: pll14xx: consolidate rate calculation
  clk: imx: pll14xx: Use FIELD_GET/FIELD_PREP
  clk: imx: pll14xx: Drop wrong shifting
  clk: imx: pll14xx: Use register defines consistently
  clk: imx8mp: remove SYS PLL 1/2 clock gates
  clk: imx8mn: remove SYS PLL 1/2 clock gates
  clk: imx8mm: remove SYS PLL 1/2 clock gates
  clk: imx: add i.MX93 clk
  clk: imx: support fracn gppll
  clk: imx: add i.MX93 composite clk
  dt-bindings: clock: add i.MX93 clock definition
  dt-bindings: clock: Add imx93 clock support
  ...

* clk-rockchip:
  clk: rockchip: re-add rational best approximation algorithm to the fractional divider
  clk/rockchip: Use of_device_get_match_data()
  clk: rockchip: Add CLK_SET_RATE_PARENT to the HDMI reference clock on rk3568
  clk: rockchip: drop CLK_SET_RATE_PARENT from dclk_vop* on rk3568
  clk: rockchip: Add more PLL rates for rk3568

 - Kunit tests for clk-gate implementation
 - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add
   support for dynamic mode

* clk-xilinx:
  clk: zynqmp: replace warn_once with pr_debug for failed clock ops

* clk-kunit:
  clk: gate: Add some kunit test suites

* clk-cs2000:
  clk: cs2000-cp: convert driver to regmap
  clk: cs2000-cp: freeze config during register fiddling
  clk: cs2000-cp: make clock skip setting configurable
  clk: cs2000-cp: add support for dynamic mode
  clk: cs2000-cp: Make aux output function controllable
  dt-bindings: clock: cs2000-cp: document cirrus,dynamic-mode
  dt-bindings: clock: cs2000-cp: document cirrus,clock-skip flag
  dt-bindings: clock: cs2000-cp: document aux-output-source
  dt-bindings: clock: convert cs2000-cp bindings to yaml

* clk-renesas:
  dt-bindings: clock: renesas: Make example 'clocks' parsable
  clk: rs9: Add Renesas 9-series PCIe clock generator driver
  clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index()
  dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator
  clk: renesas: r8a779f0: Add PFC clock
  clk: renesas: r8a779f0: Add I2C clocks
  clk: renesas: r8a779f0: Add WDT clock
  clk: renesas: r8a779f0: Fix RSW2 clock divider
  clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoC
  dt-bindings: clock: renesas: Document RZ/V2L SoC
  dt-bindings: clock: Add R9A07G054 CPG Clock and Reset Definitions
  clk: renesas: r8a779a0: Add CANFD module clock
  clk: renesas: r9a07g044: Update multiplier and divider values for PLL2/3
  clk: renesas: r8a7799[05]: Add MLP clocks
  clk: renesas: r8a779f0: Add SYS-DMAC clocks

 - Clock configuration on Microchip PolarFire SoCs
 - Free allocations on probe error in Mediatek clk driver
 - Modernize Mediatek clk driver by consolidating code

* clk-microchip:
  clk: microchip: Add driver for Microchip PolarFire SoC
  dt-bindings: clk: microchip: Add Microchip PolarFire host binding

* clk-si:
  clk-si5341: replace snprintf in show functions with sysfs_emit
  clk: si5341: fix reported clk_rate when output divider is 2

* clk-mtk: (32 commits)
  clk: mediatek: Warn if clk IDs are duplicated
  clk: mediatek: mt8195: Implement remove functions
  clk: mediatek: mt8195: Implement error handling in probe functions
  clk: mediatek: mt8195: Hook up mtk_clk_simple_remove()
  clk: mediatek: Unregister clks in mtk_clk_simple_probe() error path
  clk: mediatek: mtk: Implement error handling in register APIs
  clk: mediatek: pll: Implement error handling in register API
  clk: mediatek: mux: Implement error handling in register API
  clk: mediatek: mux: Reverse check for existing clk to reduce nesting level
  clk: mediatek: gate: Implement error handling in register API
  clk: mediatek: cpumux: Implement error handling in register API
  clk: mediatek: mtk: Clean up included headers
  clk: mediatek: Add mtk_clk_simple_remove()
  clk: mediatek: Implement mtk_clk_unregister_composites() API
  clk: mediatek: Implement mtk_clk_unregister_divider_clks() API
  clk: mediatek: Implement mtk_clk_unregister_factors() API
  clk: mediatek: Implement mtk_clk_unregister_fixed_clks() API
  clk: mediatek: pll: Clean up included headers
  clk: mediatek: pll: Implement unregister API
  clk: mediatek: pll: Split definitions into separate header file
  ...

* clk-at91:
  clk: at91: clk-master: remove dead code
  clk: at91: sama7g5: fix parents of PDMCs' GCLK
  clk: at91: sama7g5: Allow MCK1 to be exported and referenced in DT
  clk: at91: allow setting PMC_AUDIOPINCK clock parents via DT

* clk-st:
  clk: stm32mp1: Add parent_data to ETHRX clock
  clk: stm32mp1: Split ETHCK_K into separate MUX and GATE clock

In case there are only one gate or the two_gate is 0 the clk1 clock
passed is not used. We are passing 0 which is arm_pll.
Pass a invalid clock instead.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/20220222130903.17235-3-shubhrajyoti.datta@xilinx.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>

Fix the below warning

WARNING: Missing a blank line after declarations
+               int enable = !!(fclk_enable & BIT(i - fclk0));
+               zynq_clk_register_fclk(i, clk_output_name[i],
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/20220222130903.17235-2-shubhrajyoti.datta@xilinx.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>

Merge additional power management documentation udates for 5.18-rc1:

 - Add Intel uncore frequency scaling documentation file to its
   MAINTAINERS entry (Srinivas Pandruvada).

 - Clean up the AMD P-state driver documentation (Jan Engelhardt).

* pm-docs:
  Documentation: amd-pstate: grammar and sentence structure updates
  MAINTAINERS: Add additional file to uncore frequency control

Merge OPP (Operating Performance Points) changes for 5.18-rc1.

* pm-opp:
  Documentation: EM: Describe new registration method using DT
  OPP: Add support of "opp-microwatt" for EM registration
  PM: EM: add macro to set .active_power() callback conditionally
  OPP: Add "opp-microwatt" supporting code
  dt-bindings: opp: Add "opp-microwatt" entry in the OPP
  dt-bindings: power: avs: qcom,cpr: Convert to DT schema
  arm64: dts: qcom: qcs404: Rename CPU and CPR OPP tables
  arm64: dts: qcom: msm8996: Rename cluster OPP tables
  dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema
  dt-bindings: opp: qcom-opp: Convert to DT schema
  arm64: dts: qcom: msm8996-mtp: Add msm8996 compatible
  dt-bindings: arm: qcom: Add msm8996 and apq8096 compatibles
  opp: Expose of-node's name in debugfs

Pull devicetree fixes from Rob Herring:

 - Clean-up missing '/schemas' in $ref paths

 - Fix MediaTek Vcodec decoder example 'dma-ranges' errors

 - Expand available values of PBL for snps,dwmac to fix warnings in
   mediatek-dwmac.yaml example

 - Fix warnings in MediaTek display bindings

* tag 'devicetree-fixes-for-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Fix missing '/schemas' in $ref paths
  dt-bindings: media: mediatek,vcodec: Fix addressing cell sizes
  dt-bindings: net: snps,dwmac: modify available values of PBL
  dt-bindings: display: mediatek: Fix examples on new bindings
  dt-bindings: display: mediatek, ovl: Fix 'iommu' required property typo
  dt-bindings: display: mediatek, mutex: Fix mediatek, gce-events type
  Revert "dt-bindings: display: mediatek: add ethdr definition for mt8195"

Pull dma-mapping updates from Christoph Hellwig:

 - do not zero buffer in set_memory_decrypted (Kirill A. Shutemov)

 - fix return value of dma-debug __setup handlers (Randy Dunlap)

 - swiotlb cleanups (Robin Murphy)

 - remove most remaining users of the pci-dma-compat.h API
   (Christophe JAILLET)

 - share the ABI header for the DMA map_benchmark with userspace
   (Tian Tao)

 - update the maintainer for DMA MAPPING BENCHMARK (Xiang Chen)

 - remove CONFIG_DMA_REMAP (me)

* tag 'dma-mapping-5.18' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: benchmark: extract a common header file for map_benchmark definition
  dma-debug: fix return value of __setup handlers
  dma-mapping: remove CONFIG_DMA_REMAP
  media: v4l2-pci-skeleton: Remove usage of the deprecated "pci-dma-compat.h" API
  rapidio/tsi721: Remove usage of the deprecated "pci-dma-compat.h" API
  sparc: Remove usage of the deprecated "pci-dma-compat.h" API
  agp/intel: Remove usage of the deprecated "pci-dma-compat.h" API
  alpha: Remove usage of the deprecated "pci-dma-compat.h" API
  MAINTAINERS: update maintainer list of DMA MAPPING BENCHMARK
  swiotlb: simplify array allocation
  swiotlb: tidy up includes
  swiotlb: simplify debugfs setup
  swiotlb: do not zero buffer in set_memory_decrypted()

Freescale Layerscape Lynx 28G SerDes PHYs are only present on
Freescale/NXP Layerscape SoCs.

Move PHY_FSL_LYNX_28G outside the block for ARCH_MXC, as the latter
is meant for i.MX8 SoCs, which is a different family than Layerscape.
Add a dependency on ARCH_LAYERSCAPE, to prevent asking the user about
this driver when configuring a kernel without Layerscape SoC support.

Fixes: 02e2af20 ("Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc")
Fixes: 8f73b37c ("phy: add support for the Layerscape SerDes 28G")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Absolute paths in $ref should always begin with '/schemas'. The tools
mostly work with it omitted, but for correctness the path should be
everything except the hostname as that is taken from the schema's $id
value. This scheme is defined in the json-schema spec.

Cc: Hector Martin <marcan@marcan.st>
Cc: Sven Peter <sven@svenpeter.dev>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mukesh Savaliya <msavaliy@codeaurora.org>
Cc: Akash Asthana <akashast@codeaurora.org>
Cc: Bayi Cheng <bayi.cheng@mediatek.com>
Cc: Chuanhong Guo <gch981213@gmail.com>
Cc: Min Guo <min.guo@mediatek.com>
Cc: netdev@vger.kernel.org
Cc: linux-spi@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mark Brown <broonie@debian.org>
Link: https://lore.kernel.org/r/20220325215652.525383-1-robh@kernel.org

'dma-ranges' in the example is written for cell sizes of 2 cells, but
the schema and example specify sizes of 1 cell. As the h/w has a bus
address of >32-bits, cell sizes of 2 is correct. Update the schema's
'#address-cells' and '#size-cells' to be 2 and adjust the example
throughout.

There's no error currently because dtc only checks 'dma-ranges' is a
correct multiple number of cells (3) and the schema checking is based on
bracketing of entries.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220301233501.2110047-1-robh@kernel.org

PBL can be any of the following values: 1, 2, 4, 8, 16 or 32
according to the datasheet, so modify available values of PBL in
snps,dwmac.yaml.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220324012112.7016-2-biao.huang@mediatek.com

To avoid failure of dt_binding_check perform a slight refactoring
of the examples: the main block is kept, but that required fixing
the address and size cells, plus the inclusion of missing dt-bindings
headers, required to parse some of the values assigned to various
properties.

Fixes: 4ed545e7 ("dt-bindings: display: mediatek: disp: split each block to individual yaml")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Tested-by: jason-jh.lin <jason-jh.lin@medaitek.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220309134702.9942-5-jason-jh.lin@mediatek.com

The property is called 'iommus' and not 'iommu'. Fix this typo.

Fixes: 4ed545e7 ("dt-bindings: display: mediatek: disp: split each block to individual yaml")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220309134702.9942-4-jason-jh.lin@mediatek.com

The mediatek,gce-events property needs as value an array of uint32
corresponding to the CMDQ events to listen to, and not any phandle.

Fixes: 4ed545e7 ("dt-bindings: display: mediatek: disp: split each block to individual yaml")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220309134702.9942-3-jason-jh.lin@mediatek.com

This reverts commit e7dcfe64.

Because examples property of mediatek,ethdr.yaml should base on [1][2].
Reverting it until [1][2] are applied.

[1] dt-bindings: mediatek: mt8195: Add binding for MM IOMMU
https://patchwork.kernel.org/project/linux-mediatek/patch/20220217113453.13658-2-yong.wu@mediatek.com/
[2] dt-bindings: reset: mt8195: add vdosys1 reset control bit
https://patchwork.kernel.org/project/linux-mediatek/patch/20220222100741.30138-5-nancy.lin@mediatek.com/Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220309134702.9942-2-jason-jh.lin@mediatek.com

Merge tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull ptrace cleanups from Eric Biederman:
 "This set of changes removes tracehook.h, moves modification of all of
  the ptrace fields inside of siglock to remove races, adds a missing
  permission check to ptrace.c

  The removal of tracehook.h is quite significant as it has been a major
  source of confusion in recent years. Much of that confusion was around
  task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the
  semantics clearer).

  For people who don't know tracehook.h is a vestiage of an attempt to
  implement uprobes like functionality that was never fully merged, and
  was later superseeded by uprobes when uprobes was merged. For many
  years now we have been removing what tracehook functionaly a little
  bit at a time. To the point where anything left in tracehook.h was
  some weird strange thing that was difficult to understand"

* tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ptrace: Remove duplicated include in ptrace.c
  ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
  ptrace: Return the signal to continue with from ptrace_stop
  ptrace: Move setting/clearing ptrace_message into ptrace_stop
  tracehook: Remove tracehook.h
  resume_user_mode: Move to resume_user_mode.h
  resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
  signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
  task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
  task_work: Call tracehook_notify_signal from get_signal on all architectures
  task_work: Introduce task_work_pending
  task_work: Remove unnecessary include from posix_timers.h
  ptrace: Remove tracehook_signal_handler
  ptrace: Remove arch_syscall_{enter,exit}_tracehook
  ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
  ptrace/arm: Rename tracehook_report_syscall report_syscall
  ptrace: Move ptrace_report_syscall into ptrace.h

Merge tag 'ucount-rlimit-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull shm ucounts fix from Eric Biederman:
 "The introduction of a new failure mode when the code was converted to
  ucounts resulted in user_shm_lock misbehaving.

  The change simplifies the code to make the code easier to follow and
  removes the known misbehaviors"

* tag 'ucount-rlimit-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  mm/mlock: fix two bugs in user_shm_lock()

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter.

  Current release - regressions:

   - llc: only change llc->dev when bind() succeeds, fix null-deref

  Current release - new code bugs:

   - smc: fix a memory leak in smc_sysctl_net_exit()

   - dsa: realtek: make interface drivers depend on OF

  Previous releases - regressions:

   - sched: act_ct: fix ref leak when switching zones

  Previous releases - always broken:

   - netfilter: egress: report interface as outgoing

   - vsock/virtio: enable VQs early on probe and finish the setup before
     using them

  Misc:

   - memcg: enable accounting for nft objects"

* tag 'net-5.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (39 commits)
  Revert "selftests: net: Add tls config dependency for tls selftests"
  net/smc: Send out the remaining data in sndbuf before close
  net: move net_unlink_todo() out of the header
  net: dsa: bcm_sf2_cfp: fix an incorrect NULL check on list iterator
  net: bnxt_ptp: fix compilation error
  selftests: net: Add tls config dependency for tls selftests
  memcg: enable accounting for nft objects
  net/sched: act_ct: fix ref leak when switching zones
  net/smc: fix a memory leak in smc_sysctl_net_exit()
  selftests: tls: skip cmsg_to_pipe tests with TLS=n
  octeontx2-af: initialize action variable
  net: sparx5: switchdev: fix possible NULL pointer dereference
  net/x25: Fix null-ptr-deref caused by x25_disconnect
  qlcnic: dcb: default to returning -EOPNOTSUPP
  net: sparx5: depends on PTP_1588_CLOCK_OPTIONAL
  net: hns3: fix phy can not link up when autoneg off and reset
  net: hns3: add NULL pointer check for hns3_set/get_ringparam()
  net: hns3: add netdev reset check for hns3_set_tunable()
  net: hns3: clean residual vf config after disable sriov
  net: hns3: add max order judgement for tx spare buffer
  ...

This reverts commit d9142e1c.

The test is supposed to run cleanly with TLS is disabled,
to test compatibility with TCP behavior. I can't repro
the failure [1], the problem should be debugged rather
than papered over.

Link: https://lore.kernel.org/all/20220325161203.7000698c@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ [1]
Fixes: d9142e1c ("selftests: net: Add tls config dependency for tls selftests")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20220328212904.2685395-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The current autocork algorithms will delay the data transmission
in BH context to smc_release_cb() when sock_lock is hold by user.

So there is a possibility that when connection is being actively
closed (sock_lock is hold by user now), some corked data still
remains in sndbuf, waiting to be sent by smc_release_cb(). This
will cause:

- smc_close_stream_wait(), which is called under the sock_lock,
  has a high probability of timeout because data transmission is
  delayed until sock_lock is released.

- Unexpected data sends may happen after connction closed and use
  the rtoken which has been deleted by remote peer through
  LLC_DELETE_RKEY messages.

So this patch will try to send out the remaining corked data in
sndbuf before active close process, to ensure data integrity and
avoid unexpected data transmission after close.
Reported-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Fixes: 6b88af83 ("net/smc: don't send in the BH context if sock_owned_by_user")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/1648447836-111521-1-git-send-email-guwen@linux.alibaba.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull kgdb update from Daniel Thompson:
 "Only a single patch this cycle. Fix an obvious mistake with the kdb
  memory accessors.

  It was a stupid mistake (to/from backwards) but it has been there for
  a long time since many architectures tolerated it with surprisingly
  good grace"

* tag 'kgdb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kdb: Fix the putarea helper function