- 05 Jun, 2018 19 commits
-
-
Arnd Bergmann authored
The last patch apparently added a complete replacement for this function, but left the old one in place, which now causes a harmless warning: drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c:731:12: 'hclgevf_cfg_func_mta_filter' defined but not used I assume it can be removed. Fixes: 3a678b58 ("net: hns3: Optimize the VF's process of updating multicast MAC") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
It is now possible to enable the libified nf_tproxy modules without also enabling NETFILTER_XT_TARGET_TPROXY, which throws off the ifdef logic in the udp core code: net/ipv6/netfilter/nf_tproxy_ipv6.o: In function `nf_tproxy_get_sock_v6': nf_tproxy_ipv6.c:(.text+0x1a8): undefined reference to `udp6_lib_lookup' net/ipv4/netfilter/nf_tproxy_ipv4.o: In function `nf_tproxy_get_sock_v4': nf_tproxy_ipv4.c:(.text+0x3d0): undefined reference to `udp4_lib_lookup' We can actually simplify the conditions now to provide the two functions exactly when they are needed. Fixes: 45ca4e0c ("netfilter: Libify xt_TPROXY") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Máté Eckl <ecklm94@gmail.com> Signed-off-by:
-
Michal Kalderon authored
This FW contains several fixes and features. RDMA - Several modifications and fixes for Memory Windows - drop vlan and tcp timestamp from mss calculation in driver for this FW - Fix SQ completion flow when local ack timeout is infinite - Modifications in t10dif support ETH - Fix aRFS for tunneled traffic without inner IP. - Fix chip configuration which may fail under heavy traffic conditions. - Support receiving any-VNI in VXLAN and GENEVE RX classification. iSCSI / FcoE - Fix iSCSI recovery flow - Drop vlan and tcp timestamp from mss calc for fw 8.37.2.0 Misc - Several registers (split registers) won't read correctly with ethtool -d Signed-off-by:
Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by:
Manish Rangankar <manish.rangankar@cavium.com> Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
-
Maciej Żenczykowski authored
Tested: 'git grep tw_timeout' comes up empty and it builds :-) Signed-off-by:
Maciej Żenczykowski <maze@google.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Paul Blakey authored
When using a vxlan device as the ingress dev, we count it as a "no offload dev", so when such a rule comes and err stop is true, we fail early and don't try the egdev route which can offload it through the egress device. Fix that by not calling the block offload if one of the devices attached to it is not offload capable, but make sure egress on such case is capable instead. Fixes: caa72601 ("net: sched: keep track of offloaded filters [..]") Reviewed-by:
Roi Dayan <roid@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Paul Blakey <paulb@mellanox.com> Signed-off-by:
-
Xin Long authored
syzbot reported a rcu_sched self-detected stall on CPU which is caused by too small value set on rto_min with SCTP_RTOINFO sockopt. With this value, hb_timer will get stuck there, as in its timer handler it starts this timer again with this value, then goes to the timer handler again. This problem is there since very beginning, and thanks to Eric for the reproducer shared from a syzbot mail. This patch fixes it by not allowing sctp_transport_timeout to return a smaller value than HZ/5 for hb_timer, which is based on TCP's min rto. Note that it doesn't fix this issue by limiting rto_min, as some users are still using small rto and no proper value was found for it yet. Reported-by: syzbot+3dcd59a1f907245f891f@syzkaller.appspotmail.com Suggested-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Alexei Starovoitov authored
check that CC can build executables and use that compiler instead of HOSTCC Suggested-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Wei Yongjun authored
Fix to return error code -ENOMEM from the kvzalloc_node() error handling case instead of 0, as done elsewhere in this function. Fixes: 069d1146 ("net/mlx5e: RX, Enhance legacy Receive Queue memory scheme") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warning: drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:903:5: warning: symbol 'mlx5e_change_rep_mtu' was not declared. Should it be static? Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Subash Abhinov Kasiviswanathan authored
When sending an ack to a command packet, the skb is still referenced after it is sent to the real device. Since the real device could free the skb, the device pointer would be invalid. Also, remove an unnecessary variable. Fixes: ceed73a2 ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
-
Subash Abhinov Kasiviswanathan authored
RAWIP devices such as rmnet do not have a hardware address and instead require the kernel to generate a random IID for the IPv6 addresses. Signed-off-by:
Sean Tranchetti <stranche@codeaurora.org> Signed-off-by:
-
Yousuk Seung authored
Refactor tcp_ecn_check_ce and __tcp_ecn_check_ce to accept struct sock* instead of tcp_sock* to clean up type casts. This is a pure refactor patch. Signed-off-by:
Yousuk Seung <ysseung@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
David Ahern authored
syzbot reported a use-after-free: BUG: KASAN: use-after-free in ip6_route_mpath_notify+0xe9/0x100 net/ipv6/route.c:4180 Read of size 4 at addr ffff8801bf789cf0 by task syz-executor756/4555 CPU: 1 PID: 4555 Comm: syz-executor756 Not tainted 4.17.0-rc7+ #78 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:432 ip6_route_mpath_notify+0xe9/0x100 net/ipv6/route.c:4180 ip6_route_multipath_add+0x615/0x1910 net/ipv6/route.c:4303 inet6_rtm_newroute+0xe3/0x160 net/ipv6/route.c:4391 ... Allocated by task 4555: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490 kmem_cache_alloc+0x12e/0x760 mm/slab.c:3554 dst_alloc+0xbb/0x1d0 net/core/dst.c:104 __ip6_dst_alloc+0x35/0xa0 net/ipv6/route.c:361 ip6_dst_alloc+0x29/0xb0 net/ipv6/route.c:376 ip6_route_info_create+0x4d4/0x3a30 net/ipv6/route.c:2834 ip6_route_multipath_add+0xc7e/0x1910 net/ipv6/route.c:4240 inet6_rtm_newroute+0xe3/0x160 net/ipv6/route.c:4391 ... Freed by task 4555: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kmem_cache_free+0x86/0x2d0 mm/slab.c:3756 dst_destroy+0x267/0x3c0 net/core/dst.c:140 dst_release_immediate+0x71/0x9e net/core/dst.c:205 fib6_add+0xa40/0x1650 net/ipv6/ip6_fib.c:1305 __ip6_ins_rt+0x6c/0x90 net/ipv6/route.c:1011 ip6_route_multipath_add+0x513/0x1910 net/ipv6/route.c:4267 inet6_rtm_newroute+0xe3/0x160 net/ipv6/route.c:4391 ... The problem is that rt_last can point to a deleted route if the insert fails. One reproducer is to insert a route and then add a multipath route that has a duplicate nexthop.e.g,: $ ip -6 ro add vrf red 2001:db8:101::/64 nexthop via 2001:db8:1::2 $ ip -6 ro append vrf red 2001:db8:101::/64 nexthop via 2001:db8:1::4 nexthop via 2001:db8:1::2 Fix by not setting rt_last until the it is verified the insert succeeded. Fixes: 3b1137fe ("net: ipv6: Change notifications for multipath add to RTA_MULTIPATH") Cc: Eric Dumazet <edumazet@google.com> Reported-by:syzbot <syzkaller@googlegroups.com> Signed-off-by:
David Ahern <dsahern@gmail.com> Reviewed-by:
-
Kun Yi authored
BCM54612E have 4 multi-functional LED pins that can be configured through register setting; the LED4 pin can be configured to a 125MHz reference clock output by setting the spare register. Since the dedicated CLK125 reference clock pin is not brought out on the 48-Pin MLP, the LED4 pin is the only pin to provide such function in this package, and therefore it is beneficial to just enable the reference clock by default. Signed-off-by:
Kun Yi <kunyi@google.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Guillaume Nault authored
Commit d02ba2a6 ("l2tp: fix race in pppol2tp_release with session object destroy") tried to fix a race condition where a PPPoL2TP socket would disappear while the L2TP session was still using it. However, it missed the root issue which is that an L2TP session may accept to be reconnected if its associated socket has entered the release process. The tentative fix makes the session hold the socket it is connected to. That saves the kernel from crashing, but introduces refcount leakage, preventing the socket from completing the release process. Once stalled, everything the socket depends on can't be released anymore, including the L2TP session and the l2tp_ppp module. The root issue is that, when releasing a connected PPPoL2TP socket, the session's ->sk pointer (RCU-protected) is reset to NULL and we have to wait for a grace period before destroying the socket. The socket drops the session in its ->sk_destruct callback function, so the session will exist until the last reference on the socket is dropped. Therefore, there is a time frame where pppol2tp_connect() may accept reconnecting a session, as it only checks ->sk to figure out if the session is connected. This time frame is shortened by the fact that pppol2tp_release() calls l2tp_session_delete(), making the session unreachable before resetting ->sk. However, pppol2tp_connect() may grab the session before it gets unhashed by l2tp_session_delete(), but it may test ->sk after the later got reset. The race is not so hard to trigger and syzbot found a pretty reliable reproducer: https://syzkaller.appspot.com/bug?id=418578d2a4389074524e04d641eacb091961b2cf Before d02ba2a6, another race could let pppol2tp_release() overwrite the ->__sk pointer of an L2TP session, thus tricking pppol2tp_put_sk() into calling sock_put() on a socket that is different than the one for which pppol2tp_release() was originally called. To get there, we had to trigger the race described above, therefore having one PPPoL2TP socket being released, while the session it is connected to is reconnecting to a different PPPoL2TP socket. When releasing this new socket fast enough, pppol2tp_release() overwrites the session's ->__sk pointer with the address of the new socket, before the first pppol2tp_put_sk() call gets scheduled. Then the pppol2tp_put_sk() call invoked by the original socket will sock_put() the new socket, potentially dropping its last reference. When the second pppol2tp_put_sk() finally runs, its socket has already been freed. With d02ba2a6, the session takes a reference on both sockets. Furthermore, the session's ->sk pointer is reset in the pppol2tp_session_close() callback function rather than in pppol2tp_release(). Therefore, ->__sk can't be overwritten and pppol2tp_put_sk() is called only once (l2tp_session_delete() will only run pppol2tp_session_close() once, to protect the session against concurrent deletion requests). Now pppol2tp_put_sk() will properly sock_put() the original socket, but the new socket will remain, as l2tp_session_delete() prevented the release process from completing. Here, we don't depend on the ->__sk race to trigger the bug. Getting into the pppol2tp_connect() race is enough to leak the reference, no matter when new socket is released. So it all boils down to pppol2tp_connect() failing to realise that the session has already been connected. This patch drops the unneeded extra reference counting (mostly reverting d02ba2a6) and checks that neither ->sk nor ->__sk is set before allowing a session to be connected. Fixes: d02ba2a6 ("l2tp: fix race in pppol2tp_release with session object destroy") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
David S. Miller authored
Heiner Kallweit says: ==================== net: phy: improve PM handling of PHY/MDIO Current implementation of MDIO bus PM ops doesn't actually implement bus-specific PM ops but just calls PM ops defined on a device level what doesn't seem to be fully in line with the core PM model. When looking e.g. at __device_suspend() the PM core looks for PM ops of a device in a specific order: 1. device PM domain 2. device type 3. device class 4. device bus I think it has good reason that there's no PM ops on device level. The situation can be improved by modeling PHY's as device type of a MDIO device. If for some other type of MDIO device PM ops are needed, it could be modeled as struct device_type as well. ==================== Tested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Heiner Kallweit authored
Current implementation of MDIO bus PM ops doesn't actually implement bus-specific PM ops but just calls PM ops defined on a device level what doesn't seem to be fully in line with the core PM model. When looking e.g. at __device_suspend() the PM core looks for PM ops of a device in a specific order: 1. device PM domain 2. device type 3. device class 4. device bus I think it has good reason that there's no PM ops on device level. Now that a device type representation of PHY's as special type of MDIO devices was added (only user of MDIO bus PM ops), the MDIO bus PM ops can be removed including member pm of struct mdio_device. If for some other type of MDIO device PM ops are needed, it should be modeled as struct device_type as well. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
A PHY is a type of MDIO device, so let's model it as struct device_type and place PM ops, attribute groups and release callback on device type level. For this the attribute definitions have to be moved. This change allows us to get rid of the PM ops on a bus level in a second step. Signed-off-by:
-
-
- 04 Jun, 2018 21 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-06-04 This series contains a smorgasbord of updates to documentation, e1000e, igb, ixgbe, ixgbevf and i40e. Benjamin Poirier fixes a potential kernel crash due to NULL pointer dereference in e1000e. Jeff updates the kernel documentation for e100 and e1000 to correct default values and URLs which were incorrect in the documentation. Also took the time to update these to the new reStructured text format for kernel documentation. Joanna Yurdal fixes a missing PTP transmit timestamp by ensuring that TSICR gets cleared when ICR is cleared. Sergey updates igb to reset all the transmit queues at one time so that we only have to wait once for all the queues to be reset. Alex fixes ixgbevf so that malicious driver detection (MDD) can co-exist with XDP. Emil and Tony extend the RTNL lock to ensure we get the most up-to-date values for the bits and avoid a possible race condition when going down. YueHaibing from Huawei introduces a helper function in ixgbe for operation reads to simplify the code a bit more. Daniel Borkmann adds support for XDP meta data when using build SKB for i40e. Shannon Nelson provides twp fixes for the IPSec code in ixgbe, first is to make sure we do not try to offload the decryption of any incoming packet that is destined for the management engine. The other fix is to resolve a cast problem introduced by a sparse cleanup patch. ==================== Signed-off-by: -
Xi Wang authored
If the multicast mask value in device tree is configured not all 0xff, the broadcast mac will be lost from tcam table after the execution of command 'ifconfig up'. The address is appended by hns_ae_start, but will be clear later by hns_nic_set_rx_mode called in dev_open process. This patch fixed it by not use the multicast mask when add a broadcast address. Fixes: b5996f11 ("net: add Hisilicon Network Subsystem basic ethernet support") Signed-off-by:
Xi Wang <wangxi11@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
Vlad Buslov authored
If requested tcf proto is not found, get and del filter netlink protocol handlers output error message to extack, but do not return actual error code. Add check to return ENOENT when result of tp find function is NULL pointer. Fixes: c431f89b ("net: sched: split tc_ctl_tfilter into three handlers") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
-
Dan Carpenter authored
This code was introduced in 2011 around the same time that we made netdev_features_t a u64 type. These days a u32 is not big enough to hold all the potential features. Signed-off-by:
-
Dan Carpenter authored
The features mask needs to be a netdev_features_t (u64) because a u32 is not big enough. Fixes: cfc80d9a ("net: Introduce net_failover driver") Signed-off-by:
-
YueHaibing authored
Use dma_zalloc_coherent instead of dma_alloc_coherent followed by memset 0. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by:
-
YueHaibing authored
Use dma_zalloc_coherent instead of dma_alloc_coherent followed by memset 0. Signed-off-by:
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2018-06-04 Here's one last bluetooth-next pull request for the 4.18 kernel: - New USB device IDs for Realtek 8822BE and 8723DE - reset/resume fix for Dell Inspiron 5565 - Fix HCI_UART_INIT_PENDING flag behavior - Fix patching behavior for some ATH3012 models - A few other minor cleanups & fixes Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
-
Olivier Gayot authored
This patch fixes some typos/misspelling errors in the Documentation/networking files. Signed-off-by:
Olivier Gayot <olivier.gayot@sigexec.com> Signed-off-by:
-
Maciej Żenczykowski authored
It is not safe to do so because such sockets are already in the hash tables and changing these options can result in invalidating the tb->fastreuse(port) caching. This can have later far reaching consequences wrt. bind conflict checks which rely on these caches (for optimization purposes). Not to mention that you can currently end up with two identical non-reuseport listening sockets bound to the same local ip:port by clearing reuseport on them after they've already both been bound. There is unfortunately no EISBOUND error or anything similar, and EISCONN seems to be misleading for a bound-but-not-connected socket, so use EUCLEAN 'Structure needs cleaning' which AFAICT is the closest you can get to meaning 'socket in bad state'. (although perhaps EINVAL wouldn't be a bad choice either?) This does unfortunately run the risk of breaking buggy userspace programs... Signed-off-by:
-
Maciej Żenczykowski authored
This changes the /proc/sys/net/ipv4/tcp_tw_reuse from a boolean to an integer. It now takes the values 0, 1 and 2, where 0 and 1 behave as before, while 2 enables timewait socket reuse only for sockets that we can prove are loopback connections: ie. bound to 'lo' interface or where one of source or destination IPs is 127.0.0.0/8, ::ffff:127.0.0.0/104 or ::1. This enables quicker reuse of ephemeral ports for loopback connections - where tcp_tw_reuse is 100% safe from a protocol perspective (this assumes no artificially induced packet loss on 'lo'). This also makes estblishing many loopback connections *much* faster (allocating ports out of the first half of the ephemeral port range is significantly faster, then allocating from the second half) Without this change in a 32K ephemeral port space my sample program (it just establishes and closes [::1]:ephemeral -> [::1]:server_port connections in a tight loop) fails after 32765 connections in 24 seconds. With it enabled 50000 connections only take 4.7 seconds. This is particularly problematic for IPv6 where we only have one local address and cannot play tricks with varying source IP from 127.0.0.0/8 pool. Signed-off-by:
-
Yuval Bason authored
This patch adds support for configuring SRQ and provides the necessary APIs for rdma upper layer driver (qedr) to enable the SRQ feature. Signed-off-by:
Yuval Bason <yuval.bason@cavium.com> Signed-off-by:
-
David S. Miller authored
Varsha Rao says: ==================== net: bnx2: Fix checkpatch and clang warnings This patchset fixes NULL comparison and extra parentheses, checkpatch and clang warnings. ==================== Signed-off-by: -
Varsha Rao authored
This patch fixes the checkpatch issue of NULL comparison. Replace x == NULL with !x, by using the following coccinelle script: @disable is_null@ expression e; @@ -e==NULL +!e Signed-off-by:
Varsha Rao <rvarsha016@gmail.com> Signed-off-by:
-
Varsha Rao authored
The following coccinelle script removes extra parentheses to fix the clang warning of extraneous parentheses. @disable paren@ identifier i; expression e; statement s; @@ if ( -(i == e) +i == e ) s Suggested-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
-
YueHaibing authored
Trivial fix to spelling mistake in gemini dev_warn message Signed-off-by:
-
Paul Blakey authored
We incorrectly compare the mask and the result is that we can't modify an already existing rule. Fix that by comparing correctly. Fixes: 05cd271f ("cls_flower: Support multiple masks per priority") Reported-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Paul Blakey authored
When destroying the instance, destroy the head rhashtable. Fixes: 05cd271f ("cls_flower: Support multiple masks per priority") Reported-by:
-
Randy Dunlap authored
<linux/skbuff.h> does not use nor need <linux/slab.h>, so drop this header file from skbuff.h. <linux/skbuff.h> is currently #included in around 1200 C source and header files, making it the 31st most-used header file. Build tested [allmodconfig] on 20 arch-es. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
YueHaibing authored
Use dma_zalloc_coherent for allocating zeroed memory and remove unnecessary memset function. Signed-off-by:
-
David Howells authored
Sometimes an in-progress call will stop responding on the fileserver when the fileserver quietly cancels the call with an internally marked abort (RX_CALL_DEAD), without sending an ABORT to the client. This causes the client's call to eventually expire from lack of incoming packets directed its way, which currently leads to it being cancelled locally with ETIME. Note that it's not currently clear as to why this happens as it's really hard to reproduce. The rotation policy implement by kAFS, however, doesn't differentiate between ETIME meaning we didn't get any response from the server and ETIME meaning the call got cancelled mid-flow. The latter leads to an oops when fetching data as the rotation partially resets the afs_read descriptor, which can result in a cleared page pointer being dereferenced because that page has already been filled. Handle this by the following means: (1) Set a flag on a call when we receive a packet for it. (2) Store the highest packet serial number so far received for a call (bearing in mind this may wrap). (3) If, when the "not received anything recently" timeout expires on a call, we've received at least one packet for a call and the connection as a whole has received packets more recently than that call, then cancel the call locally with ECONNRESET rather than ETIME. This indicates that the call was definitely in progress on the server. (4) In kAFS, if the rotation algorithm sees ECONNRESET rather than ETIME, don't try the next server, but rather abort the call. This avoids the oops as we don't try to reuse the afs_read struct. Rather, as-yet ungotten pages will be reread at a later data. Also: (5) Add an rxrpc tracepoint to log detection of the call being reset. Without this, I occasionally see an oops like the following: general protection fault: 0000 [#1] SMP PTI ... RIP: 0010:_copy_to_iter+0x204/0x310 RSP: 0018:ffff8800cae0f828 EFLAGS: 00010206 RAX: 0000000000000560 RBX: 0000000000000560 RCX: 0000000000000560 RDX: ffff8800cae0f968 RSI: ffff8800d58b3312 RDI: 0005080000000000 RBP: ffff8800cae0f968 R08: 0000000000000560 R09: ffff8800ca00f400 R10: ffff8800c36f28d4 R11: 00000000000008c4 R12: ffff8800cae0f958 R13: 0000000000000560 R14: ffff8800d58b3312 R15: 0000000000000560 FS: 00007fdaef108080(0000) GS:ffff8800ca680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb28a8fa000 CR3: 00000000d2a76002 CR4: 00000000001606e0 Call Trace: skb_copy_datagram_iter+0x14e/0x289 rxrpc_recvmsg_data.isra.0+0x6f3/0xf68 ? trace_buffer_unlock_commit_regs+0x4f/0x89 rxrpc_kernel_recv_data+0x149/0x421 afs_extract_data+0x1e0/0x798 ? afs_wait_for_call_to_complete+0xc9/0x52e afs_deliver_fs_fetch_data+0x33a/0x5ab afs_deliver_to_call+0x1ee/0x5e0 ? afs_wait_for_call_to_complete+0xc9/0x52e afs_wait_for_call_to_complete+0x12b/0x52e ? wake_up_q+0x54/0x54 afs_make_call+0x287/0x462 ? afs_fs_fetch_data+0x3e6/0x3ed ? rcu_read_lock_sched_held+0x5d/0x63 afs_fs_fetch_data+0x3e6/0x3ed afs_fetch_data+0xbb/0x14a afs_readpages+0x317/0x40d __do_page_cache_readahead+0x203/0x2ba ? ondemand_readahead+0x3a7/0x3c1 ondemand_readahead+0x3a7/0x3c1 generic_file_buffered_read+0x18b/0x62f __vfs_read+0xdb/0xfe vfs_read+0xb2/0x137 ksys_read+0x50/0x8c do_syscall_64+0x7d/0x1a0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Note the weird value in RDI which is a result of trying to kmap() a NULL page pointer. Signed-off-by:David Howells <dhowells@redhat.com> Signed-off-by:
-
