Skip to content

L
linux
Switch branch/tag
  1. 23 Mar, 2023 12 commits
  3. 22 Mar, 2023 13 commits
    • Ido Schimmel's avatar
      mlxsw: spectrum_fid: Fix incorrect local port type · bb765a74
      Ido Schimmel authored 
      Local port is a 10-bit number, but it was mistakenly stored in a u8,
resulting in firmware errors when using a netdev corresponding to a
local port higher than 255.

Fix by storing the local port in u16, as is done in the rest of the
code.

Fixes: bf73904f ("mlxsw: Add support for 802.1Q FID family")
Signed-off-by: default avatarIdo Schimmel <idosch@nvidia.com>
Reviewed-by: default avatarDanielle Ratson <danieller@nvidia.com>
Signed-off-by: default avatarPetr Machata <petrm@nvidia.com>
Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/eace1f9d96545ab8a2775db857cb7e291a9b166b.1679398549.git.petrm@nvidia.comSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      bb765a74
    • Felix Fietkau's avatar
      wifi: mac80211: fix mesh path discovery based on unicast packets · f355f701
      Felix Fietkau authored 
      If a packet has reached its intended destination, it was bumped to the code
that accepts it, without first checking if a mesh_path needs to be created
based on the discovered source.
Fix this by moving the destination address check further down.

Cc: stable@vger.kernel.org
Fixes: 986e43b1 ("wifi: mac80211: fix receiving A-MSDU frames on mesh interfaces")
Signed-off-by: default avatarFelix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230314095956.62085-3-nbd@nbd.nameSigned-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      f355f701
    • Felix Fietkau's avatar
      wifi: mac80211: fix qos on mesh interfaces · 4e348c6c
      Felix Fietkau authored 
      When ieee80211_select_queue is called for mesh, the sta pointer is usually
NULL, since the nexthop is looked up much later in the tx path.
Explicitly check for unicast address in that case in order to make qos work
again.

Cc: stable@vger.kernel.org
Fixes: 50e2ab39 ("wifi: mac80211: fix queue selection for mesh/OCB interfaces")
Signed-off-by: default avatarFelix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230314095956.62085-1-nbd@nbd.nameSigned-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      4e348c6c
    • Johannes Berg's avatar
      wifi: iwlwifi: mvm: protect TXQ list manipulation · 923bf981
      Johannes Berg authored 
      Some recent upstream debugging uncovered the fact that in
iwlwifi, the TXQ list manipulation is racy.

Introduce a new state bit for when the TXQ is completely
ready and can be used without locking, and if that's not
set yet acquire the lock to check everything correctly.
Reviewed-by: default avatarBenjamin Berg <benjamin.berg@intel.com>
Tested-by: default avatarJose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      923bf981
    • Johannes Berg's avatar
      wifi: iwlwifi: mvm: fix mvmtxq->stopped handling · b58e3d43
      Johannes Berg authored 
      This could race if the queue is redirected while full, then
the flushing internally would start it while it's not yet
usable again. Fix it by using two state bits instead of just
one.
Reviewed-by: default avatarBenjamin Berg <benjamin.berg@intel.com>
Tested-by: default avatarJose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      b58e3d43
    • Zhang Changzhong's avatar
      net/sonic: use dma_mapping_error() for error check · 4107b874
      Zhang Changzhong authored 
      The DMA address returned by dma_map_single() should be checked with
dma_mapping_error(). Fix it accordingly.

Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update")
Signed-off-by: default avatarZhang Changzhong <zhangchangzhong@huawei.com>
Tested-by: default avatarStan Johnson <userm57@yahoo.com>
Signed-off-by: default avatarFinn Thain <fthain@linux-m68k.org>
Reviewed-by: default avatarLeon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/6645a4b5c1e364312103f48b7b36783b94e197a2.1679370343.git.fthain@linux-m68k.orgSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      4107b874
    • Jakub Kicinski's avatar
      Merge branch 'fix-trainwreck-with-ocelot-switch-statistics-counters' · 82463d9d
      Jakub Kicinski authored 
      Vladimir Oltean says:

====================
Fix trainwreck with Ocelot switch statistics counters

While testing the patch set for preemptible traffic classes with some
controlled traffic and measuring counter deltas:
https://lore.kernel.org/netdev/20230220122343.1156614-1-vladimir.oltean@nxp.com/

I noticed that in the output of "ethtool -S swp0 --groups eth-mac
eth-phy eth-ctrl rmon -- --src emac | grep -v ': 0'", the TX counters
were off. Quickly I realized that their values were permutated by 1
compared to their names, and that for example
tx-rmon-etherStatsPkts64to64Octets was incrementing when
tx-rmon-etherStatsPkts65to127Octets should have.

Initially I suspected something having to do with the bulk reading
logic, and indeed I found a bug there (fixed as 1/3), but that was not
the source of the problems. Instead it revealed other problems.

While dumping the regions created by the driver on my switch, I figured
out that it sees a discontinuity which shouldn't have existed between
reg 0x278 and reg 0x280.

Discontinuity between last reg 0x0 and new reg 0x0, creating new region
Discontinuity between last reg 0x108 and new reg 0x200, creating new region
Discontinuity between last reg 0x278 and new reg 0x280, creating new region
Discontinuity between last reg 0x2b0 and new reg 0x400, creating new region
region of 67 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 31 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 13 contiguous counters starting with SYS:STAT:CNT[0x0a0]
region of 18 contiguous counters starting with SYS:STAT:CNT[0x100]

That is where TX_MM_HOLD should have been, and that was the bug, since
it was missing. After adding it, the regions look like this and the
off-by-one issue is resolved:

Discontinuity between last reg 0x000000 and new reg 0x000000, creating new region
Discontinuity between last reg 0x000108 and new reg 0x000200, creating new region
Discontinuity between last reg 0x0002b0 and new reg 0x000400, creating new region
region of 67 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 45 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 18 contiguous counters starting with SYS:STAT:CNT[0x100]

However, as I am thinking out loud, it should have not reported the
other counters as off by one even when skipping TX_MM_HOLD... after all,
on Ocelot/Seville, there are more counters which need to be skipped.

Which is when I investigated and noticed the bug solved in 2/3.
I've validated that both on native VSC9959 (which uses
ocelot_mm_stats_layout) as well as by faking the other switches by
making VSC9959 use the plain ocelot_stats_layout.

To summarize: on all Ocelot switches, the TX counters and drop counters
are completely broken. The RX counters are mostly fine.

With this occasion, I have collected more cleanup patches in this area,
which I'm going to submit after the net -> net-next merge.
====================

Link: https://lore.kernel.org/r/20230321010325.897817-1-vladimir.oltean@nxp.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      82463d9d
    • Vladimir Oltean's avatar
      net: mscc: ocelot: add TX_MM_HOLD to ocelot_mm_stats_layout · 5291099e
      Vladimir Oltean authored 
      The lack of a definition for this counter is what initially prompted me
to investigate a problem which really manifested itself as the previous
change, "net: mscc: ocelot: fix transfer from region->buf to ocelot->stats".

When TX_MM_HOLD is defined in enum ocelot_stat but not in struct
ocelot_stat_layout ocelot_mm_stats_layout, this creates a hole, which
due to the aforementioned bug, makes all counters following TX_MM_HOLD
be recorded off by one compared to their correct position. So for
example, a non-zero TX_PMAC_OCTETS would be reported as TX_MERGE_FRAGMENTS,
TX_PMAC_UNICAST would be reported as TX_PMAC_OCTETS, TX_PMAC_64 would be
reported as TX_PMAC_PAUSE, etc etc. This is because the size of the hole
(1) is much smaller than the size of the region, so the phenomenon where
the stats are off-by-one, rather than lost, prevails.

However, the phenomenon where stats are lost can be seen too, for
example with DROP_LOCAL, which is at the beginning of its own region
(offset 0x000400 vs the previous 0x0002b0 constitutes a discontinuity).
This is also reported as off by one and saved to TX_PMAC_1527_MAX, but
that counter is not reported to the unstructured "ethtool -S", as
opposed to DROP_LOCAL which is (as "drop_local").

Fixes: ab3f97a9 ("net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      5291099e
    • Vladimir Oltean's avatar
      net: mscc: ocelot: fix transfer from region->buf to ocelot->stats · 17dfd210
      Vladimir Oltean authored 
      To understand the problem, we need some definitions.

The driver is aware of multiple counters (enum ocelot_stat), yet not all
switches supported by the driver implement all counters. There are 2
statistics layouts: ocelot_stats_layout and ocelot_mm_stats_layout, the
latter having 36 counters more than the former.

ocelot->stats[] is not a compact array, i.e. there are elements within
it which are not going to be populated for ocelot_stats_layout. On the
other hand, ocelot->stats[] is easily indexable, for example "tx_octets"
for port 3 can be found at ocelot->stats[3 * OCELOT_NUM_STATS +
OCELOT_STAT_TX_OCTETS], and that is why we keep it sparse.

Regions, as created by ocelot_prepare_stats_regions(), are compact
(every element from region->buf will correspond to a counter that is
present in this switch's layout) but are not easily indexable.

Let's define holes as the ranges of values of enum ocelot_stat for which
ocelot_stats_layout doesn't have a "reg" defined. For example, there is
a hole between OCELOT_STAT_RX_GREEN_PRIO_7 and OCELOT_STAT_TX_OCTETS
which is of 23 elements that are only present on ocelot_mm_stats_layout,
and as such, they are also present in enum ocelot_stat. Let's define the
left extremity of the hole - the last enum ocelot_stat still defined -
as A (in this case OCELOT_STAT_RX_GREEN_PRIO_7) and the right extremity -
the first enum ocelot_stat that is defined after a series of undefined
ones - as B (in this case OCELOT_STAT_TX_OCTETS).

There is a bug in the procedure which transfers stats from region->buf[]
to ocelot->stats[].

For each hole in the ocelot_stats_layout, the logic transfers the stats
starting with enum ocelot_stat B to ocelot->stats[] index A + 1. So all
stats after a hole are saved to a position which is off by B - A + 1
elements.

This causes 2 kinds of issues:
(a) counters which shouldn't increment increment
(b) counters which should increment don't

Holes in the ocelot_stat_layout automatically imply the end of a region
and the beginning of a new one; however the reverse is not necessarily
true. For example, for ocelot_mm_stat_layout, there could be multiple
regions (which indicate discontinuities in register addresses) while
there is no hole (which indicates discontinuities in enum ocelot_stat
values).

In the example above, the stats from the second region->buf[] are not
transferred to ocelot->stats starting with index
"port * OCELOT_NUM_STATS + OCELOT_STAT_TX_OCTETS" as they should, but
rather, starting with element
"port * OCELOT_NUM_STATS + OCELOT_STAT_RX_GREEN_PRIO_7 + 1".

That stats[] array element is not reported to user space for switches
that use ocelot_stat_layout, and that is how issue (b) occurs.

However, if the length of the second region is larger than the hole,
then some stats will start to be transferred to the ocelot->stats[]
indices which *are* reported to user space, but those indices contain
wrong values (corresponding to unexpected counters). This is how issue
(a) occurs.

The procedure, as it was introduced in commit d87b1c08 ("net: mscc:
ocelot: use bulk reads for stats"), was not buggy, because there were no
holes in the struct ocelot_stat_layout instances at that time. The
problem is that when those holes were introduced, the function was not
updated to take them into consideration.

To update the procedure, we need to know, for each region, which enum
ocelot_stat corresponds to its region->base. We have no way of deducing
that based on the contents of struct ocelot_stats_region, so we need to
add this information.

Fixes: ab3f97a9 ("net: mscc: ocelot: export ethtool MAC Merge stats for Felix VSC9959")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      17dfd210
    • Vladimir Oltean's avatar
      net: mscc: ocelot: fix stats region batching · 6acc72a4
      Vladimir Oltean authored 
      The blamed commit changed struct ocelot_stat_layout :: "u32 offset" to
"u32 reg".

However, "u32 reg" is not quite a register address, but an enum
ocelot_reg, which in itself encodes an enum ocelot_target target in the
upper bits, and an index into the ocelot->map[target][] array in the
lower bits.

So, whereas the previous code comparison between stats_layout[i].offset
and last + 1 was correct (because those "offsets" at the time were
32-bit relative addresses), the new code, comparing layout[i].reg to
last + 4 is not correct, because the "reg" here is an enum/index, not an
actual register address.

What we want to compare are indeed register addresses, but to do that,
we need to actually go through the same motions as
__ocelot_bulk_read_ix() itself.

With this bug, all statistics counters are deemed by
ocelot_prepare_stats_regions() as constituting their own region.
(Truncated) log on VSC9959 (Felix) below (prints added by me):

Before:

region of 1 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x001]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x002]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x041]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x042]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x081]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x0ac]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x100]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x101]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x111]

After:

region of 67 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 45 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 18 contiguous counters starting with SYS:STAT:CNT[0x100]

Since commit d87b1c08 ("net: mscc: ocelot: use bulk reads for
stats") intended bulking as a performance improvement, and since now,
with trivial-sized regions, performance is even worse than without
bulking at all, this could easily qualify as a performance regression.

Fixes: d4c36765 ("net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: default avatarColin Foster <colin.foster@in-advantage.com>
Tested-by: default avatarColin Foster <colin.foster@in-advantage.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      6acc72a4
    • Eric Dumazet's avatar
      erspan: do not use skb_mac_header() in ndo_start_xmit() · 8e50ed77
      Eric Dumazet authored 
      Drivers should not assume skb_mac_header(skb) == skb->data in their
ndo_start_xmit().

Use skb_network_offset() and skb_transport_offset() which
better describe what is needed in erspan_fb_xmit() and
ip6erspan_tunnel_xmit()

syzbot reported:
WARNING: CPU: 0 PID: 5083 at include/linux/skbuff.h:2873 skb_mac_header include/linux/skbuff.h:2873 [inline]
WARNING: CPU: 0 PID: 5083 at include/linux/skbuff.h:2873 ip6erspan_tunnel_xmit+0x1d9c/0x2d90 net/ipv6/ip6_gre.c:962
Modules linked in:
CPU: 0 PID: 5083 Comm: syz-executor406 Not tainted 6.3.0-rc2-syzkaller-00866-gd4671cb9 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
RIP: 0010:skb_mac_header include/linux/skbuff.h:2873 [inline]
RIP: 0010:ip6erspan_tunnel_xmit+0x1d9c/0x2d90 net/ipv6/ip6_gre.c:962
Code: 04 02 41 01 de 84 c0 74 08 3c 03 0f 8e 1c 0a 00 00 45 89 b4 24 c8 00 00 00 c6 85 77 fe ff ff 01 e9 33 e7 ff ff e8 b4 27 a1 f8 <0f> 0b e9 b6 e7 ff ff e8 a8 27 a1 f8 49 8d bf f0 0c 00 00 48 b8 00
RSP: 0018:ffffc90003b2f830 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 000000000000ffff RCX: 0000000000000000
RDX: ffff888021273a80 RSI: ffffffff88e1bd4c RDI: 0000000000000003
RBP: ffffc90003b2f9d8 R08: 0000000000000003 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000000 R12: ffff88802b28da00
R13: 00000000000000d0 R14: ffff88807e25b6d0 R15: ffff888023408000
FS: 0000555556a61300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055e5b11eb6e8 CR3: 0000000027c1b000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__netdev_start_xmit include/linux/netdevice.h:4900 [inline]
netdev_start_xmit include/linux/netdevice.h:4914 [inline]
__dev_direct_xmit+0x504/0x730 net/core/dev.c:4300
dev_direct_xmit include/linux/netdevice.h:3088 [inline]
packet_xmit+0x20a/0x390 net/packet/af_packet.c:285
packet_snd net/packet/af_packet.c:3075 [inline]
packet_sendmsg+0x31a0/0x5150 net/packet/af_packet.c:3107
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg+0xde/0x190 net/socket.c:747
__sys_sendto+0x23a/0x340 net/socket.c:2142
__do_sys_sendto net/socket.c:2154 [inline]
__se_sys_sendto net/socket.c:2150 [inline]
__x64_sys_sendto+0xe1/0x1b0 net/socket.c:2150
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f123aaa1039
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc15d12058 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f123aaa1039
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000020000040 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f123aa648c0
R13: 431bde82d7b634db R14: 0000000000000000 R15: 0000000000000000

Fixes: 1baf5ebf ("erspan: auto detect truncated packets.")
Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230320163427.8096-1-edumazet@google.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      8e50ed77
    • Li Zetao's avatar
      atm: idt77252: fix kmemleak when rmmod idt77252 · 4fe3c885
      Li Zetao authored 
      There are memory leaks reported by kmemleak:

  unreferenced object 0xffff888106500800 (size 128):
    comm "modprobe", pid 1017, jiffies 4297787785 (age 67.152s)
    hex dump (first 32 bytes):
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    backtrace:
      [<00000000970ce626>] __kmem_cache_alloc_node+0x20c/0x380
      [<00000000fb5f78d9>] kmalloc_trace+0x2f/0xb0
      [<000000000e947e2a>] idt77252_init_one+0x2847/0x3c90 [idt77252]
      [<000000006efb048e>] local_pci_probe+0xeb/0x1a0
    ...

  unreferenced object 0xffff888106500b00 (size 128):
    comm "modprobe", pid 1017, jiffies 4297787785 (age 67.152s)
    hex dump (first 32 bytes):
      00 20 3d 01 80 88 ff ff 00 20 3d 01 80 88 ff ff  . =...... =.....
      f0 23 3d 01 80 88 ff ff 00 20 3d 01 00 00 00 00  .#=...... =.....
    backtrace:
      [<00000000970ce626>] __kmem_cache_alloc_node+0x20c/0x380
      [<00000000fb5f78d9>] kmalloc_trace+0x2f/0xb0
      [<00000000f451c5be>] alloc_scq.constprop.0+0x4a/0x400 [idt77252]
      [<00000000e6313849>] idt77252_init_one+0x28cf/0x3c90 [idt77252]

The root cause is traced to the vc_maps which alloced in open_card_oam()
are not freed in close_card_oam(). The vc_maps are used to record
open connections, so when close a vc_map in close_card_oam(), the memory
should be freed. Moreover, the ubr0 is not closed when close a idt77252
device, leading to the memory leak of vc_map and scq_info.

Fix them by adding kfree in close_card_oam() and implementing new
close_card_ubr0() to close ubr0.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: default avatarLi Zetao <lizetao1@huawei.com>
Reviewed-by: default avatarFrancois Romieu <romieu@fr.zoreil.com>
Link: https://lore.kernel.org/r/20230320143318.2644630-1-lizetao1@huawei.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      4fe3c885
    • Álvaro Fernández Rojas's avatar
      net: dsa: tag_brcm: legacy: fix daisy-chained switches · 032a9540
      Álvaro Fernández Rojas authored 
      When BCM63xx internal switches are connected to switches with a 4-byte
Broadcom tag, it does not identify the packet as VLAN tagged, so it adds one
based on its PVID (which is likely 0).
Right now, the packet is received by the BCM63xx internal switch and the 6-byte
tag is properly processed. The next step would to decode the corresponding
4-byte tag. However, the internal switch adds an invalid VLAN tag after the
6-byte tag and the 4-byte tag handling fails.
In order to fix this we need to remove the invalid VLAN tag after the 6-byte
tag before passing it to the 4-byte tag decoding.

Fixes: 964dbf18 ("net: dsa: tag_brcm: add support for legacy tags")
Signed-off-by: default avatarÁlvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: default avatarMichal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230319095540.239064-1-noltari@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      032a9540
  5. 21 Mar, 2023 13 commits
    • Dan Carpenter's avatar
      net/mlx5: E-Switch, Fix an Oops in error handling code · 640fcdbc
      Dan Carpenter authored 
      The error handling dereferences "vport".  There is nothing we can do if
it is an error pointer except returning the error code.

Fixes: 133dcfc5 ("net/mlx5: E-Switch, Alloc and free unique metadata for match")
Signed-off-by: default avatarDan Carpenter <error27@gmail.com>
Reviewed-by: default avatarRoi Dayan <roid@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      640fcdbc
    • Maher Sanalla's avatar
      net/mlx5: Read the TC mapping of all priorities on ETS query · 44d55318
      Maher Sanalla authored 
      When ETS configurations are queried by the user to get the mapping
assignment between packet priority and traffic class, only priorities up
to maximum TCs are queried from QTCT register in FW to retrieve their
assigned TC, leaving the rest of the priorities mapped to the default
TC #0 which might be misleading.

Fix by querying the TC mapping of all priorities on each ETS query,
regardless of the maximum number of TCs configured in FW.

Fixes: 820c2c5e ("net/mlx5e: Read ETS settings directly from firmware")
Signed-off-by: default avatarMaher Sanalla <msanalla@nvidia.com>
Reviewed-by: default avatarMoshe Shemesh <moshe@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      44d55318
    • Emeel Hakim's avatar
      net/mlx5e: Overcome slow response for first macsec ASO WQE · 7e3fce82
      Emeel Hakim authored 
      First ASO WQE poll causes a cache miss in hardware hence the resut is
delayed. It causes to the situation where such WQE is polled earlier
than it is needed.

Add logic to retry ASO CQ polling operation.

Fixes: 739cfa34 ("net/mlx5: Make ASO poll CQ usable in atomic context") 
Signed-off-by: default avatarEmeel Hakim <ehakim@nvidia.com>
Reviewed-by: default avatarLeon Romanovsky <leonro@nvidia.com>
Reviewed-by: default avatarRaed Salem <raeds@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      7e3fce82
    • Roy Novich's avatar
      net/mlx5e: Initialize link speed to zero · 6e9d51b1
      Roy Novich authored 
      mlx5e_port_max_linkspeed does not guarantee value assignment for speed.
Avoid cases where link_speed might be used uninitialized. In case
mlx5e_port_max_linkspeed fails, a default link speed of 50000 will be
used for the calculations.

Fixes: 3f6d08d1 ("net/mlx5e: Add RSS support for hairpin")
Signed-off-by: default avatarRoy Novich <royno@nvidia.com>
Reviewed-by: default avatarTariq Toukan <tariqt@nvidia.com>
Reviewed-by: default avatarAya Levin <ayal@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      6e9d51b1
    • Lama Kayal's avatar
      net/mlx5: Fix steering rules cleanup · 922f56e9
      Lama Kayal authored 
      vport's mc, uc and multicast rules are not deleted in teardown path when
EEH happens. Since the vport's promisc settings(uc, mc and all) in
firmware are reset after EEH, mlx5 driver will try to delete the above
rules in the initialization path. This cause kernel crash because these
software rules are no longer valid.

Fix by nullifying these rules right after delete to avoid accessing any dangling
pointers.

Call Trace:
__list_del_entry_valid+0xcc/0x100 (unreliable)
tree_put_node+0xf4/0x1b0 [mlx5_core]
tree_remove_node+0x30/0x70 [mlx5_core]
mlx5_del_flow_rules+0x14c/0x1f0 [mlx5_core]
esw_apply_vport_rx_mode+0x10c/0x200 [mlx5_core]
esw_update_vport_rx_mode+0xb4/0x180 [mlx5_core]
esw_vport_change_handle_locked+0x1ec/0x230 [mlx5_core]
esw_enable_vport+0x130/0x260 [mlx5_core]
mlx5_eswitch_enable_sriov+0x2a0/0x2f0 [mlx5_core]
mlx5_device_enable_sriov+0x74/0x440 [mlx5_core]
mlx5_load_one+0x114c/0x1550 [mlx5_core]
mlx5_pci_resume+0x68/0xf0 [mlx5_core]
eeh_report_resume+0x1a4/0x230
eeh_pe_dev_traverse+0x98/0x170
eeh_handle_normal_event+0x3e4/0x640
eeh_handle_event+0x4c/0x370
eeh_event_handler+0x14c/0x210
kthread+0x168/0x1b0
ret_from_kernel_thread+0x5c/0x84

Fixes: a35f71f2 ("net/mlx5: E-Switch, Implement promiscuous rx modes vf request handling")
Signed-off-by: default avatarHuy Nguyen <huyn@mellanox.com>
Signed-off-by: default avatarLama Kayal <lkayal@nvidia.com>
Reviewed-by: default avatarTariq Toukan <tariqt@nvidia.com>
Reviewed-by: default avatarMaor Dickman <maord@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      922f56e9
    • Gavin Li's avatar
      net/mlx5e: Block entering switchdev mode with ns inconsistency · 662404b2
      Gavin Li authored 
      Upon entering switchdev mode, VF/SF representors are spawned in the
devlink instance's net namespace, whereas the PF net device transforms
into the uplink representor, remaining in the net namespace the PF net
device was in. Therefore, if a PF net device's namespace is different from
its parent devlink net namespace, entering switchdev mode can create an
illegal situation where all representors sharing the same core device
are NOT in the same net namespace.

To avoid this issue, block entering switchdev mode for devices whose child
netdev net namespace has diverged from the parent devlink's.

Fixes: 7768d197 ("net/mlx5: E-Switch, Add control for encapsulation")
Signed-off-by: default avatarGavin Li <gavinl@nvidia.com>
Reviewed-by: default avatarGavi Teitz <gavi@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      662404b2
    • Gavin Li's avatar
      net/mlx5e: Set uplink rep as NETNS_LOCAL · c83172b0
      Gavin Li authored 
      Previously, NETNS_LOCAL was not set for uplink representors, inconsistent
with VF representors, and allowed the uplink representor to be moved
between net namespaces and separated from the VF representors it shares
the core device with. Such usage would break the isolation model of
namespaces, as devices in different namespaces would have access to
shared memory.

To solve this issue, set NETNS_LOCAL for uplink representors if eswitch is
in switchdev mode.

Fixes: 7a9fb35e ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode")
Signed-off-by: default avatarGavin Li <gavinl@nvidia.com>
Reviewed-by: default avatarGavi Teitz <gavi@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
      c83172b0
    • Radoslaw Tyl's avatar
      i40e: fix flow director packet filter programming · c672297b
      Radoslaw Tyl authored 
      Initialize to zero structures to build a valid
Tx Packet used for the filter programming.

Fixes: a9219b33 ("i40e: VLAN field for flow director")
Signed-off-by: default avatarRadoslaw Tyl <radoslawx.tyl@intel.com>
Reviewed-by: default avatarMichal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      c672297b
    • Stefan Assmann's avatar
      iavf: fix hang on reboot with ice · 4e264be9
      Stefan Assmann authored 
      When a system with E810 with existing VFs gets rebooted the following
hang may be observed.

 Pid 1 is hung in iavf_remove(), part of a network driver:
 PID: 1        TASK: ffff965400e5a340  CPU: 24   COMMAND: "systemd-shutdow"
  #0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb
  #1 [ffffaad04005fae8] schedule at ffffffff8b323e2d
  #2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc
  #3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930
  #4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf]
  #5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513
  #6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa
  #7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc
  #8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e
  #9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429
 #10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4
 #11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice]
 #12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice]
 #13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice]
 #14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1
 #15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386
 #16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870
 #17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6
 #18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159
 #19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc
 #20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d
 #21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169
 #22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b
     RIP: 00007f1baa5c13d7  RSP: 00007fffbcc55a98  RFLAGS: 00000202
     RAX: ffffffffffffffda  RBX: 0000000000000000  RCX: 00007f1baa5c13d7
     RDX: 0000000001234567  RSI: 0000000028121969  RDI: 00000000fee1dead
     RBP: 00007fffbcc55ca0   R8: 0000000000000000   R9: 00007fffbcc54e90
     R10: 00007fffbcc55050  R11: 0000000000000202  R12: 0000000000000005
     R13: 0000000000000000  R14: 00007fffbcc55af0  R15: 0000000000000000
     ORIG_RAX: 00000000000000a9  CS: 0033  SS: 002b

During reboot all drivers PM shutdown callbacks are invoked.
In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE.
In ice_shutdown() the call chain above is executed, which at some point
calls iavf_remove(). However iavf_remove() expects the VF to be in one
of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If
that's not the case it sleeps forever.
So if iavf_shutdown() gets invoked before iavf_remove() the system will
hang indefinitely because the adapter is already in state __IAVF_REMOVE.

Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE,
as we already went through iavf_shutdown().

Fixes: 97457801 ("iavf: Add waiting so the port is initialized in remove")
Fixes: a8417330 ("iavf: Fix race condition between iavf_shutdown and iavf_remove")
Reported-by: default avatarMarius Cornea <mcornea@redhat.com>
Signed-off-by: default avatarStefan Assmann <sassmann@kpanic.de>
Reviewed-by: default avatarMichal Kubiak <michal.kubiak@intel.com>
Tested-by: default avatarRafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      4e264be9
    • Michal Swiatkowski's avatar
      ice: remove filters only if VSI is deleted · 7d46c0e6
      Michal Swiatkowski authored 
      Filters shouldn't be removed in VSI rebuild path. Removing them on PF
VSI results in no rule for PF MAC after changing for example queues
amount.

Remove all filters only in the VSI remove flow. As unload should also
cause the filter to be removed introduce, a new function ice_stop_eth().
It will unroll ice_start_eth(), so remove filters and close VSI.

Fixes: 6624e780 ("ice: split ice_vsi_setup into smaller functions")
Signed-off-by: default avatarMichal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      7d46c0e6
    • Michal Swiatkowski's avatar
      ice: check if VF exists before mode check · 83b49e7f
      Michal Swiatkowski authored 
      Setting trust on VF should return EINVAL when there is no VF. Move
checking for switchdev mode after checking if VF exists.

Fixes: c54d209c ("ice: Wait for VF to be reset/ready before configuration")
Signed-off-by: default avatarMichal Swiatkowski <michal.swiatkowski@intel.com>
Signed-off-by: default avatarKalyan Kodamagula <kalyan.kodamagula@intel.com>
Tested-by: default avatarSujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      83b49e7f
    • Piotr Raczynski's avatar
      ice: fix rx buffers handling for flow director packets · 387d42ae
      Piotr Raczynski authored 
      Adding flow director filters stopped working correctly after
commit 2fba7dc5 ("ice: Add support for XDP multi-buffer
on Rx side"). As a result, only first flow director filter
can be added, adding next filter leads to NULL pointer
dereference attached below.

Rx buffer handling and reallocation logic has been optimized,
however flow director specific traffic was not accounted for.
As a result driver handled those packets incorrectly since new
logic was based on ice_rx_ring::first_desc which was not set
in this case.

Fix this by setting struct ice_rx_ring::first_desc to next_to_clean
for flow director received packets.

[  438.544867] BUG: kernel NULL pointer dereference, address: 0000000000000000
[  438.551840] #PF: supervisor read access in kernel mode
[  438.556978] #PF: error_code(0x0000) - not-present page
[  438.562115] PGD 7c953b2067 P4D 0
[  438.565436] Oops: 0000 [#1] PREEMPT SMP NOPTI
[  438.569794] CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 6.2.0-net-bug #1
[  438.577531] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022
[  438.588470] RIP: 0010:ice_clean_rx_irq+0x2b9/0xf20 [ice]
[  438.593860] Code: 45 89 f7 e9 ac 00 00 00 8b 4d 78 41 31 4e 10 41 09 d5 4d 85 f6 0f 84 82 00 00 00 49 8b 4e 08 41 8b 76
1c 65 8b 3d 47 36 4a 3f <48> 8b 11 48 c1 ea 36 39 d7 0f 85 a6 00 00 00 f6 41 08 02 0f 85 9c
[  438.612605] RSP: 0018:ff8c732640003ec8 EFLAGS: 00010082
[  438.617831] RAX: 0000000000000800 RBX: 00000000000007ff RCX: 0000000000000000
[  438.624957] RDX: 0000000000000800 RSI: 0000000000000000 RDI: 0000000000000000
[  438.632089] RBP: ff4ed275a2158200 R08: 00000000ffffffff R09: 0000000000000020
[  438.639222] R10: 0000000000000000 R11: 0000000000000020 R12: 0000000000001000
[  438.646356] R13: 0000000000000000 R14: ff4ed275d0daffe0 R15: 0000000000000000
[  438.653485] FS:  0000000000000000(0000) GS:ff4ed2738fa00000(0000) knlGS:0000000000000000
[  438.661563] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  438.667310] CR2: 0000000000000000 CR3: 0000007c9f0d6006 CR4: 0000000000771ef0
[  438.674444] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  438.681573] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  438.688697] PKRU: 55555554
[  438.691404] Call Trace:
[  438.693857]  <IRQ>
[  438.695877]  ? profile_tick+0x17/0x80
[  438.699542]  ice_msix_clean_ctrl_vsi+0x24/0x50 [ice]
[  438.702571] ice 0000:b1:00.0: VF 1: ctrl_vsi irq timeout
[  438.704542]  __handle_irq_event_percpu+0x43/0x1a0
[  438.704549]  handle_irq_event+0x34/0x70
[  438.704554]  handle_edge_irq+0x9f/0x240
[  438.709901] iavf 0000:b1:01.1: Failed to add Flow Director filter with status: 6
[  438.714571]  __common_interrupt+0x63/0x100
[  438.714580]  common_interrupt+0xb4/0xd0
[  438.718424] iavf 0000:b1:01.1: Rule ID: 127 dst_ip: 0.0.0.0 src_ip 0.0.0.0 UDP: dst_port 4 src_port 0
[  438.722255]  </IRQ>
[  438.722257]  <TASK>
[  438.722257]  asm_common_interrupt+0x22/0x40
[  438.722262] RIP: 0010:cpuidle_enter_state+0xc8/0x430
[  438.722267] Code: 6e e9 25 ff e8 f9 ef ff ff 8b 53 04 49 89 c5 0f 1f 44 00 00 31 ff e8 d7 f1 24 ff 45
84 ff 0f 85 57 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 85 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d
[  438.722269] RSP: 0018:ffffffff86003e50 EFLAGS: 00000246
[  438.784108] RAX: ff4ed2738fa00000 RBX: ffbe72a64fc01020 RCX: 0000000000000000
[  438.791234] RDX: 0000000000000000 RSI: ffffffff858d84de RDI: ffffffff85893641
[  438.798365] RBP: 0000000000000002 R08: 0000000000000002 R09: 000000003158af9d
[  438.805490] R10: 0000000000000008 R11: 0000000000000354 R12: ffffffff862365a0
[  438.812622] R13: 000000661b472a87 R14: 0000000000000002 R15: 0000000000000000
[  438.819757]  cpuidle_enter+0x29/0x40
[  438.823333]  do_idle+0x1b6/0x230
[  438.826566]  cpu_startup_entry+0x19/0x20
[  438.830492]  rest_init+0xcb/0xd0
[  438.833717]  arch_call_rest_init+0xa/0x30
[  438.837731]  start_kernel+0x776/0xb70
[  438.841396]  secondary_startup_64_no_verify+0xe5/0xeb
[  438.846449]  </TASK>

Fixes: 2fba7dc5 ("ice: Add support for XDP multi-buffer on Rx side")
Signed-off-by: default avatarPiotr Raczynski <piotr.raczynski@intel.com>
Acked-by: default avatarMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      387d42ae
    • Jiasheng Jiang's avatar
      octeontx2-vf: Add missing free for alloc_percpu · f038f391
      Jiasheng Jiang authored 
      Add the free_percpu for the allocated "vf->hw.lmt_info" in order to avoid
memory leak, same as the "pf->hw.lmt_info" in
`drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c`.

Fixes: 5c051207 ("octeontx2-pf: cn10k: Use runtime allocated LMTLINE region")
Signed-off-by: default avatarJiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: default avatarMichal Swiatkowski <michal.swiatkowski@linux.intel.com>
Acked-by: default avatarGeethasowjanya Akula <gakula@marvell.com>
Link: https://lore.kernel.org/r/20230317064337.18198-1-jiasheng@iscas.ac.cnSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      f038f391
  7. 20 Mar, 2023 2 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7