- 10 Dec, 2019 3 commits
-
-
Kai Vehmanen authored
Add a module parameter 'codec_mask' to filter out unwanted HDA codecs from driver probe. E.g. on most systems, codec_mask=4 will limit to HDMI audio and exclude any external HDA codecs. Similar to 'probe_mask' module parameter of snd-hda-intel. Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191210004854.16845-6-pierre-louis.bossart@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Slawomir Blauciak authored
This change adds stream map and channel map structures used for channel re-routing and stream aggregation. Signed-off-by:
Slawomir Blauciak <slawomir.blauciak@linux.intel.com> Signed-off-by:
-
Seppo Ingalsuo authored
This patch adds into SOF topology the handling of ASRC DAPM type, adds the tokens to configure the ASRC, and implement component IPC into the driver. Signed-off-by:
Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com> Signed-off-by:
-
- 09 Dec, 2019 31 commits
-
-
Ranjani Sridharan authored
Set the drv_name and tplg_filename for nocodec machine driver in sof_machine_check(). This means the sof_nocodec_setup() does not need the mach, plat_data or desc arguments any longer. Signed-off-by:
Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
-
Daniel Baluta authored
This field is only set but never used. Let's remove it to make code cleaner. Signed-off-by:
-
Ranjani Sridharan authored
Remove nocodec_fw_filename from struct sof_dev_desc as it is not longer needed. Signed-off-by:
-
Daniel Baluta authored
Currently, SOF probes machine drivers by creating a platform device and passing the machine description as private data. This is driven by the ACPI restrictions. Ideally, ACPI tables should contain the description for the machine driver. This is not possible because ACPI tables are frozen and used on multiple OS-es (e.g Windows). In the case of Device Tree we don't have this restriction, so we choose to probe the machine drivers by creating a DT node as is the standard ALSA way. This patch makes the probing of machine drivers from SOF core optional allowing for Device Tree platforms to decouple the SOF core from machine driver probing. Along with this, it also consolidates the machine driver selection for Intel platforms by defining optional ops for selecting the machine driver based on the ACPI match for HDA and non-HDA platforms and setting the mach params. Signed-off-by:
-
Ranjani Sridharan authored
The machine driver selection for HDA platforms will be consolidated and moved out of the SOF DSP probe callback. In preparation for that, modify the signature for hda_codec_probe_bus() to pass the hda_codec_use_common_hdmi as a variable while probing the HDA codecs. Signed-off-by:
-
Ranjani Sridharan authored
Move all the audio-specific code in the core, audio-specific logic in the top-level PM callbacks and the core header files into a separate file (sof-audio.*) in preparation for adding an audio client device. In the process of moving all structure definitions for widget, routes, pcm's etc, the snd_sof_dev member in all these structs is replaced with the snd_soc_component member. Also, use the component device instead of the snd_sof_dev device wherever possible in the PCM component driver, control IO functions and the topology parser as the component device will be moved over to the client device later on. Signed-off-by:
-
Ranjani Sridharan authored
Currently the FW filename is obtained from the ACPI matching table when determining which machine driver to use. In preparation for making the machine driver ACPI match optional for Device Tree platforms and moving the machine driver selection out of the SOF core, this patch introduces the default_fw_filename member in struct sof_dev_desc. Once the machine driver selection is moved out of SOF core, the nocodec_fw_filename will become obsolete and will be removed. Signed-off-by:
-
Ranjani Sridharan authored
For some platforms, the refcount is explicitly incremented to prevent it from entering runtime suspend. This should be be done during probe in the core instead of being done in the PCM driver. Signed-off-by:
-
Ranjani Sridharan authored
Modify the signature for snd_sof_create_page_table to take struct device pointer as an argument instead of struct snd_sof_dev as this will be used by both the SOF core device and its clients. Also, move the definition out of core.c to utils.c. Signed-off-by:
-
Ranjani Sridharan authored
Remove snd_sof_init_topology() as it is never used. Signed-off-by:
-
Jaroslav Kysela authored
The long card name might be used in GUI. This information should be hidden. Add CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES configuration option. Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Signed-off-by:
-
Jaroslav Kysela authored
Use the control interface (field 'components' in the info structure) to pass the I/O configuration details. The goal is to replace the card long name with this. Signed-off-by:
-
Jaroslav Kysela authored
It is required for the auto-detection in the user space (for UCM). Signed-off-by:
-
Jerome Brunet authored
The dai codec needs to ensure that on one dai is used at any time. This is currently protected by bit atomic operation. With this change, it done with a mutex instead. This change is not about functionality or efficiency. It is done with the hope that it help maintainability in the future. Suggested-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20191206103542.485224-1-jbrunet@baylibre.comSigned-off-by:
-
Randy Dunlap authored
Fix a kernel-doc warning in soc-core.c by adding notation for @legacy_dai_naming. ../sound/soc/soc-core.c:2509: warning: Function parameter or member 'legacy_dai_naming' not described in 'snd_soc_register_dai' Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: alsa-devel@alsa-project.org Link: https://lore.kernel.org/r/2215ee04-e870-5eea-a00c-9a5caf06faae@infradead.orgSigned-off-by:
-
Bard Liao authored
The existing code uses two handlers for a shared edge-based MSI interrupts. In corner cases, interrupts are lost, leading to IPC timeouts. Those timeouts do not appear in legacy mode. This patch merges the two handlers and threads into a single one, and simplifies the mask/unmask operations by using a single top-level mask (Global Interrupt Enable). The handler only checks for interrupt sources using the Global Interrupt Status (GIS) field, and all the actual work happens in the thread. This also enables us to remove the use of spin locks. Stream events are prioritized over IPC ones. This patch was tested with HDaudio and SoundWire platforms, and all known IPC timeout issues are solved in MSI mode. The SoundWire-specific patches will be provided in follow-up patches, where the SoundWire interrupts are handled in the same thread as IPC and stream interrupts. Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
-
Peter Ujfalusi authored
When McASP is master the bclk can be generated from two main source: AUXCLK: functional clock for McASP or AHCLK: from external source or internal mux in dra7x family With this patch it is possible to select between the two source. The patch is not breaking existing machine drivers since historically the clk_id was ignored and left as 0 in all cases. When output clock is configured - which can be only the AHCLK, we select the AUXCLK as source for the internal HCLK. In this case the HCLK rate is the same as the output clock. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191204192005.31210-1-peter.ujfalusi@ti.comSigned-off-by:
-
Olivier Moysan authored
Add "DAC mux" DAPM widget in CS42l51 audio codec routes, to support DAC mux control and to remove error trace "DAC Mux has no paths" at widget creation. Note: ADC path of DAC mux is not routed in this patch. Signed-off-by:
Olivier Moysan <olivier.moysan@st.com> Link: https://lore.kernel.org/r/20191203141627.29471-1-olivier.moysan@st.comSigned-off-by:
-
Geert Uytterhoeven authored
There is no need to store the inverted DALIGN values in the table, as they can easily be calculated at run-time. This also protects against the introduction of inconsistencies between normal and inverted values by a future table modification. Reorder the two subexpressions in the AND check, to perform the least expensive check first. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Acked-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20191202155834.22582-1-geert+renesas@glider.beSigned-off-by:
-
Nikita Yushchenko authored
Chip supports soft stepping of volume changes and it is enabled by default. This patch adds a control for it, so it could be either made slower (two sample periods per step instead of one), or disabled. Signed-off-by:
Nikita Yushchenko <nikita.yoush@cogentembedded.com> Link: https://lore.kernel.org/r/20191129132719.11603-1-nikita.yoush@cogentembedded.comSigned-off-by:
-
Tzung-Bi Shih authored
According to the datasheet, there are some registers can only be changed when SHDN is 0. Changing these settings during SHDN = 1 can compromise device stability and performance specifications. Saves SHDN before writing to these sensitive registers and restores SHDN afterward. Here is the register list codec driver of max98090 wants to change: M98090_REG_QUICK_SYSTEM_CLOCK 0x04 M98090_REG_QUICK_SAMPLE_RATE 0x05 M98090_REG_DAI_INTERFACE 0x06 M98090_REG_DAC_PATH 0x07 M98090_REG_MIC_DIRECT_TO_ADC 0x08 M98090_REG_LINE_TO_ADC 0x09 M98090_REG_ANALOG_MIC_LOOP 0x0A M98090_REG_ANALOG_LINE_LOOP 0x0B M98090_REG_SYSTEM_CLOCK 0x1B M98090_REG_CLOCK_MODE 0x1C M98090_REG_CLOCK_RATIO_NI_MSB 0x1D M98090_REG_CLOCK_RATIO_NI_LSB 0x1E M98090_REG_CLOCK_RATIO_MI_MSB 0x1F M98090_REG_CLOCK_RATIO_MI_LSB 0x20 M98090_REG_MASTER_MODE 0x21 M98090_REG_INTERFACE_FORMAT 0x22 M98090_REG_TDM_CONTROL 0x23 M98090_REG_TDM_FORMAT 0x24 M98090_REG_IO_CONFIGURATION 0x25 M98090_REG_FILTER_CONFIG 0x26 M98090_REG_INPUT_ENABLE 0x3E M98090_REG_OUTPUT_ENABLE 0x3F M98090_REG_BIAS_CONTROL 0x42 M98090_REG_DAC_CONTROL 0x43 M98090_REG_ADC_CONTROL 0x44 M98090_REG_DRC_TIMING 0x33 M98090_REG_DRC_COMPRESSOR 0x34 M98090_REG_DRC_EXPANDER 0x35 M98090_REG_DSP_FILTER_ENABLE 0x41 M98090_REG_EQUALIZER_BASE 0x46 M98090_REG_RECORD_BIQUAD_BASE 0xAF M98090_REG_DIGITAL_MIC_ENABLE 0x13 M98090_REG_DIGITAL_MIC_CONFIG 0x14 Signed-off-by:
Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20191128151908.180871-1-tzungbi@google.comSigned-off-by:
-
Michael Walle authored
The LS1028A SoC uses the same interrupt line for adjacent SAIs. Use IRQF_SHARED to be able to use these SAIs simultaneously. Signed-off-by:
Michael Walle <michael@walle.cc> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Acked-by:
-
Nikita Yushchenko authored
HP output driver has two parameters that can be configured to reduce pop noise: power-on delay and ramp-up step time. Two new kcontrols have been added to set these parameters. Also have to alter timeout in aic31xx_dapm_power_event() because default timeout does fire when higher supported power-on delay are configured. Signed-off-by:
-
Eason Yen authored
Refine mtk_afe_fe_hw_params and mtk_afe_fe_prepare by these helpers. - mtk_memif_set_enable - mtk_memif_set_disable - mtk_memif_set_addr - mtk_memif_set_channel - mtk_memif_set_rate - mtk_memif_set_rate_substream - mtk_memif_set_format - mtk_memif_set_pbuf_size Signed-off-by:
Eason Yen <eason.yen@mediatek.com> Link: https://lore.kernel.org/r/1573814926-15805-3-git-send-email-eason.yen@mediatek.comSigned-off-by:
-
Eason Yen authored
1. Add the following helper in mtk-afe-fe-dai to control to control mtk_memif - mtk_memif_set_enable - mtk_memif_set_disable - mtk_memif_set_addr - mtk_memif_set_channel - mtk_memif_set_rate - mtk_memif_set_rate_substream - mtk_memif_set_format - mtk_memif_set_pbuf_size 2.extend mtk_base_memif_data struct for new platform Signed-off-by:
-
Kai Vehmanen authored
This reverts commit 019033c8 ("ASoC: Intel: hdac_hdmi: add Icelake support"). Icelake HDMI audio is supported by the HDMI codec driver, which can be used both in non-DSP (legacy HDA) and with DSP (SOF) configurations. Signed-off-by:
-
Kai Vehmanen authored
Modify Kconfig rules for machine drivers used by SOF to pick SND_HDA_CODEC_HDMI by default if other conditions are met. For shared machine drivers used also by older SST driver, keep using HDAC_HDMI. Signed-off-by:
-
Kai Vehmanen authored
Use the common HDMI driver by default if the codec driver is selected in kernel build. Signed-off-by:
-
Sathyanarayana Nujella authored
Update tgl mach table to include machine with max98357a & ALC5682. Signed-off-by:
Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Signed-off-by:
Jairaj Arava <jairaj.arava@intel.com> Signed-off-by:
-
Sathyanarayana Nujella authored
This patch adds the driver data and updates quirk info for tgl with max98357a speaker amp and ALC5682 headset codec. Signed-off-by:
-
Sathyanarayana Nujella authored
TGL supports one more HDMI DAI than previous models. So add quirk support for number of HDMI DAI's. Signed-off-by:
-
- 08 Dec, 2019 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) More jumbo frame fixes in r8169, from Heiner Kallweit. 2) Fix bpf build in minimal configuration, from Alexei Starovoitov. 3) Use after free in slcan driver, from Jouni Hogander. 4) Flower classifier port ranges don't work properly in the HW offload case, from Yoshiki Komachi. 5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin. 6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk. 7) Fix flow dissection in dsa TX path, from Alexander Lobakin. 8) Stale syncookie timestampe fixes from Guillaume Nault. [ Did an evil merge to silence a warning introduced by this pull - Linus ] * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) r8169: fix rtl_hw_jumbo_disable for RTL8168evl net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add() r8169: add missing RX enabling for WoL on RTL8125 vhost/vsock: accept only packets with the right dst_cid net: phy: dp83867: fix hfs boot in rgmii mode net: ethernet: ti: cpsw: fix extra rx interrupt inet: protect against too small mtu values. gre: refetch erspan header from skb->data after pskb_may_pull() pppoe: remove redundant BUG_ON() check in pppoe_pernet tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE() tcp: tighten acceptance of ACKs not matching a child socket tcp: fix rejected syncookies due to stale timestamps lpc_eth: kernel BUG on remove tcp: md5: fix potential overestimation of TCP option space net: sched: allow indirect blocks to bind to clsact in TC net: core: rename indirect block ingress cb function net-sysfs: Call dev_hold always in netdev_queue_add_kobject net: dsa: fix flow dissection on Tx path net/tls: Fix return values to avoid ENOTSUPP net: avoid an indirect call in ____sys_recvmsg() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "Eleven patches, all in drivers (no core changes) that are either minor cleanups or small fixes. They were late arriving, but still safe for -rc1" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: MAINTAINERS: Add the linux-scsi mailing list to the ISCSI entry scsi: megaraid_sas: Make poll_aen_lock static scsi: sd_zbc: Improve report zones error printout scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI scsi: qla2xxx: unregister ports after GPN_FT failure scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan scsi: pm80xx: Remove unused include of linux/version.h scsi: pm80xx: fix logic to break out of loop when register value is 2 or 3 scsi: scsi_transport_sas: Fix memory leak when removing devices scsi: lpfc: size cpu map by last cpu id set scsi: ibmvscsi_tgt: Remove unneeded variable rc
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Nine cifs/smb3 fixes: - one fix for stable (oops during oplock break) - two timestamp fixes including important one for updating mtime at close to avoid stale metadata caching issue on dirty files (also improves perf by using SMB2_CLOSE_FLAG_POSTQUERY_ATTRIB over the wire) - two fixes for "modefromsid" mount option for file create (now allows mode bits to be set more atomically and accurately on create by adding "sd_context" on create when modefromsid specified on mount) - two fixes for multichannel found in testing this week against different servers - two small cleanup patches" * tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: improve check for when we send the security descriptor context on create smb3: fix mode passed in on create for modetosid mount option cifs: fix possible uninitialized access and race on iface_list cifs: Fix lookup of SMB connections on multichannel smb3: query attributes on file close smb3: remove unused flag passed into close functions cifs: remove redundant assignment to pointer pneg_ctxt fs: cifs: Fix atime update check vs mtime CIFS: Fix NULL-pointer dereference in smb2_push_mandatory_locks -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull misc vfs cleanups from Al Viro: "No common topic, just three cleanups". * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: make __d_alloc() static fs/namespace: add __user to open_tree and move_mount syscalls fs/fnctl: fix missing __user in fcntl_rw_hint()
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB update from Jon Mason: "Just a simple patch to add a new Hygon Device ID to the AMD NTB device driver" * tag 'ntb-5.5' of git://github.com/jonmason/ntb: NTB: Add Hygon Device ID
-
