- 11 Aug, 2023 2 commits
-
-
Shenwei Wang authored
When using a fixed-link setup, certain devices like the SJA1105 require a small pause in the TXC clock line to enable their internal tunable delay line (TDL). To satisfy this requirement, this patch temporarily disables the TX clock, and restarts it after a required period. This provides the required silent interval on the clock line for SJA1105 to complete the frequency transition and enable the internal TDLs. This action occurs before the link is built up, so it does not impact a normal device too. There is no need to identify if the connected device is an SJA1105 alike or not during the implementation. So far we have only enabled this feature on the i.MX93 platform. Signed-off-by:
Shenwei Wang <shenwei.wang@nxp.com> Reviewed-by:
Frank Li <frank.li@nxp.com> Link: https://lore.kernel.org/r/20230807160716.259072-3-shenwei.wang@nxp.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Shenwei Wang authored
A mode parameter has been added to the callback function of fix_mac_speed to indicate the physical layer type. The mode can be one the following: MLO_AN_PHY - Conventional PHY MLO_AN_FIXED - Fixed-link mode MLO_AN_INBAND - In-band protocol Signed-off-by:
-
- 10 Aug, 2023 26 commits
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Martin KaFai Lau says: ==================== pull-request: bpf-next 2023-08-09 We've added 19 non-merge commits during the last 6 day(s) which contain a total of 25 files changed, 369 insertions(+), 141 deletions(-). The main changes are: 1) Fix array-index-out-of-bounds access when detaching from an already empty mprog entry from Daniel Borkmann. 2) Adjust bpf selftest because of a recent llvm change related to the cpu-v4 ISA from Eduard Zingerman. 3) Add uprobe support for the bpf_get_func_ip helper from Jiri Olsa. 4) Fix a KASAN splat due to the kernel incorrectly accepted an invalid program using the recent cpu-v4 instruction from Yonghong Song. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: bpf: btf: Remove two unused function declarations bpf: lru: Remove unused declaration bpf_lru_promote() selftests/bpf: relax expected log messages to allow emitting BPF_ST selftests/bpf: remove duplicated functions bpf, docs: Fix small typo and define semantics of sign extension selftests/bpf: Add bpf_get_func_ip test for uprobe inside function selftests/bpf: Add bpf_get_func_ip tests for uprobe on function entry bpf: Add support for bpf_get_func_ip helper for uprobe program selftests/bpf: Add a movsx selftest for sign-extension of R10 bpf: Fix an incorrect verification success with movsx insn bpf, docs: Formalize type notation and function semantics in ISA standard bpf: change bpf_alu_sign_string and bpf_movsx_string to static libbpf: Use local includes inside the library bpf: fix bpf_dynptr_slice() to stop return an ERR_PTR. bpf: fix inconsistent return types of bpf_xdp_copy_buf(). selftests/bpf: fix the incorrect verification of port numbers. selftests/bpf: Add test for detachment on empty mprog entry bpf: Fix mprog detachment for empty mprog entry bpf: bpf_struct_ops: Remove unnecessary initial values of variables ==================== Link: https://lore.kernel.org/r/20230810055123.109578-1-martin.lau@linux.devSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/intel/igc/igc_main.c 06b41258 ("igc: Add lock to safeguard global Qbv variables") d3750076 ("igc: Add TransmissionOverrun counter") drivers/net/ethernet/microsoft/mana/mana_en.c a7dfeda6 ("net: mana: Fix MANA VF unload when hardware is unresponsive") a9ca9f9c ("page_pool: split types and declarations from page_pool.h") 92272ec4 ("eth: add missing xdp.h includes in drivers") net/mptcp/protocol.h 511b90e3 ("mptcp: fix disconnect vs accept race") b8dc6d6c ("mptcp: fix rcv buffer auto-tuning") tools/testing/selftests/net/mptcp/mptcp_join.sh c8c101ae ("selftests: mptcp: join: fix 'implicit EP' test") 03668c65 ("selftests: mptcp: join: rework detailed report") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, wireless and bpf. Still trending up in size but the good news is that the "current" regressions are resolved, AFAIK. We're getting weirdly many fixes for Wake-on-LAN and suspend/resume handling on embedded this week (most not merged yet), not sure why. But those are all for older bugs. Current release - regressions: - tls: set MSG_SPLICE_PAGES consistently when handing encrypted data over to TCP Current release - new code bugs: - eth: mlx5: correct IDs on VFs internal to the device (IPU) Previous releases - regressions: - phy: at803x: fix WoL support / reporting on AR8032 - bonding: fix incorrect deletion of ETH_P_8021AD protocol VID from slaves, leading to BUG_ON() - tun: prevent tun_build_skb() from exceeding the packet size limit - wifi: rtw89: fix 8852AE disconnection caused by RX full flags - eth/PCI: enetc: fix probing after 6fffbc7a ("PCI: Honor firmware's device disabled status"), keep PCI devices around even if they are disabled / not going to be probed to be able to apply quirks on them - eth: prestera: fix handling IPv4 routes with nexthop IDs Previous releases - always broken: - netfilter: re-work garbage collection to avoid races between user-facing API and timeouts - tunnels: fix generating ipv4 PMTU error on non-linear skbs - nexthop: fix infinite nexthop bucket dump when using maximum nexthop ID - wifi: nl80211: fix integer overflow in nl80211_parse_mbssid_elems() Misc: - unix: use consistent error code in SO_PEERPIDFD - ipv6: adjust ndisc_is_useropt() to include PREFIX_INFO, in prep for upcoming IETF RFC" * tag 'net-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits) net: hns3: fix strscpy causing content truncation issue net: tls: set MSG_SPLICE_PAGES consistently ibmvnic: Ensure login failure recovery is safe from other resets ibmvnic: Do partial reset on login failure ibmvnic: Handle DMA unmapping of login buffs in release functions ibmvnic: Unmap DMA login rsp buffer on send login fail ibmvnic: Enforce stronger sanity checks on login response net: mana: Fix MANA VF unload when hardware is unresponsive netfilter: nf_tables: remove busy mark and gc batch API netfilter: nft_set_hash: mark set element as dead when deleting from packet path netfilter: nf_tables: adapt set backend to use GC transaction API netfilter: nf_tables: GC transaction API to avoid race with control plane selftests/bpf: Add sockmap test for redirecting partial skb data selftests/bpf: fix a CI failure caused by vsock sockmap test bpf, sockmap: Fix bug that strp_done cannot be called bpf, sockmap: Fix map type error in sock_map_del_link xsk: fix refcount underflow in error path ipv6: adjust ndisc_is_useropt() to also return true for PIO selftests: forwarding: bridge_mdb: Make test more robust selftests: forwarding: bridge_mdb_max: Fix failing test with old libnet ... -
Hao Chen authored
hns3_dbg_fill_content()/hclge_dbg_fill_content() is aim to integrate some items to a string for content, and we add '\n' and '\0' in the last two bytes of content. strscpy() will add '\0' in the last byte of destination buffer(one of items), it result in finishing content print ahead of schedule and some dump content truncation. One Error log shows as below: cat mac_list/uc UC MAC_LIST: Expected: UC MAC_LIST: FUNC_ID MAC_ADDR STATE pf 00:2b:19:05:03:00 ACTIVE The destination buffer is length-bounded and not required to be NUL-terminated, so just change strscpy() to memcpy() to fix it. Fixes: 1cf3d556 ("net: hns3: fix strncpy() not using dest-buf length as length issue") Signed-off-by:
Hao Chen <chenhao418@huawei.com> Signed-off-by:
Jijie Shao <shaojijie@huawei.com> Link: https://lore.kernel.org/r/20230809020902.1941471-1-shaojijie@huawei.comSigned-off-by:
-
Jakub Kicinski authored
We used to change the flags for the last segment, because non-last segments had the MSG_SENDPAGE_NOTLAST flag set. That flag is no longer a thing so remove the setting. Since flags most likely don't have MSG_SPLICE_PAGES set this avoids passing parts of the sg as splice and parts as non-splice. Before commit under Fixes we'd have called tcp_sendpage() which would add the MSG_SPLICE_PAGES. Why this leads to trouble remains unclear but Tariq reports hitting the WARN_ON(!sendpage_ok()) due to page refcount of 0. Fixes: e117dcfd ("tls: Inline do_tcp_sendpages()") Reported-by:
Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/all/4c49176f-147a-4283-f1b1-32aac7b4b996@gmail.com/Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengineLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: - HAS_IOMEM fixes for fsl edma and intel idma - return-value fix, interrupt vector setting and typo fix for xilinx xdma - email updates for codeaurora email domain move - correct pause status for pl330 driver - idxd clear flag on disable fix - function documentation fix for owl dma - potential un-allocated memory fix for mcf driver * tag 'dmaengine-fix-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: xilinx: xdma: Fix typo dmaengine: xilinx: xdma: Fix interrupt vector setting dmaengine: owl-dma: Modify mismatched function name dmaengine: idxd: Clear PRS disable flag when disabling IDXD device dmaengine: pl330: Return DMA_PAUSED when transaction is paused dmaengine: qcom_hidma: Update codeaurora email domain dmaengine: mcf-edma: Fix a potential un-allocated memory access dmaengine: xilinx: xdma: Fix Judgment of the return value idmaengine: make FSL_EDMA and INTEL_IDMA64 depends on HAS_IOMEM
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The existing attempt to resolve races between control plane and GC work is error prone, as reported by Bien Pham <phamnnb@sea.com>, some places forgot to call nft_set_elem_mark_busy(), leading to double-deactivation of elements. This series contains the following patches: 1) Do not skip expired elements during walk otherwise elements might never decrement the reference counter on data, leading to memleak. 2) Add a GC transaction API to replace the former attempt to deal with races between control plane and GC. GC worker sets on NFT_SET_ELEM_DEAD_BIT on elements and it creates a GC transaction to remove the expired elements, GC transaction could abort in case of interference with control plane and retried later (GC async). Set backends such as rbtree and pipapo also perform GC from control plane (GC sync), in such case, element deactivation and removal is safe because mutex is held then collected elements are released via call_rcu(). 3) Adapt existing set backends to use the GC transaction API. 4) Update rhash set backend to set on _DEAD bit to report deleted elements from datapath for GC. 5) Remove old GC batch API and the NFT_SET_ELEM_BUSY_BIT. * tag 'nf-23-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: remove busy mark and gc batch API netfilter: nft_set_hash: mark set element as dead when deleting from packet path netfilter: nf_tables: adapt set backend to use GC transaction API netfilter: nf_tables: GC transaction API to avoid race with control plane netfilter: nf_tables: don't skip expired elements during walk ==================== Link: https://lore.kernel.org/r/20230810070830.24064-1-pablo@netfilter.orgSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Martin KaFai Lau says: ==================== pull-request: bpf 2023-08-09 We've added 5 non-merge commits during the last 7 day(s) which contain a total of 6 files changed, 102 insertions(+), 8 deletions(-). The main changes are: 1) A bpf sockmap memleak fix and a fix in accessing the programs of a sockmap under the incorrect map type from Xu Kuohai. 2) A refcount underflow fix in xsk from Magnus Karlsson. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Add sockmap test for redirecting partial skb data selftests/bpf: fix a CI failure caused by vsock sockmap test bpf, sockmap: Fix bug that strp_done cannot be called bpf, sockmap: Fix map type error in sock_map_del_link xsk: fix refcount underflow in error path ==================== Link: https://lore.kernel.org/r/20230810055303.120917-1-martin.lau@linux.devSigned-off-by:
-
Nick Child authored
If a login request fails, the recovery process should be protected against parallel resets. It is a known issue that freeing and registering CRQ's in quick succession can result in a failover CRQ from the VIOS. Processing a failover during login recovery is dangerous for two reasons: 1. This will result in two parallel initialization processes, this can cause serious issues during login. 2. It is possible that the failover CRQ is received but never executed. We get notified of a pending failover through a transport event CRQ. The reset is not performed until a INIT CRQ request is received. Previously, if CRQ init fails during login recovery, then the ibmvnic irq is freed and the login process returned error. If failover_pending is true (a transport event was received), then the ibmvnic device would never be able to process the reset since it cannot receive the CRQ_INIT request due to the irq being freed. This leaved the device in a inoperable state. Therefore, the login failure recovery process must be hardened against these possible issues. Possible failovers (due to quick CRQ free and init) must be avoided and any issues during re-initialization should be dealt with instead of being propagated up the stack. This logic is similar to that of ibmvnic_probe(). Fixes: dff515a3 ("ibmvnic: Harden device login requests") Signed-off-by:
Nick Child <nnac123@linux.ibm.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230809221038.51296-5-nnac123@linux.ibm.comSigned-off-by:
-
Nick Child authored
Perform a partial reset before sending a login request if any of the following are true: 1. If a previous request times out. This can be dangerous because the VIOS could still receive the old login request at any point after the timeout. Therefore, it is best to re-register the CRQ's and sub-CRQ's before retrying. 2. If the previous request returns an error that is not described in PAPR. PAPR provides procedures if the login returns with partial success or aborted return codes (section L.5.1) but other values do not have a defined procedure. Previously, these conditions just returned error from the login function rather than trying to resolve the issue. This can cause further issues since most callers of the login function are not prepared to handle an error when logging in. This improper cleanup can lead to the device being permanently DOWN'd. For example, if the VIOS believes that the device is already logged in then it will return INVALID_STATE (-7). If we never re-register CRQ's then it will always think that the device is already logged in. This leaves the device inoperable. The partial reset involves freeing the sub-CRQs, freeing the CRQ then registering and initializing a new CRQ and sub-CRQs. This essentially restarts all communication with VIOS to allow for a fresh login attempt that will be unhindered by any previous failed attempts. Fixes: dff515a3 ("ibmvnic: Harden device login requests") Signed-off-by:
-
Nick Child authored
Rather than leaving the DMA unmapping of the login buffers to the login response handler, move this work into the login release functions. Previously, these functions were only used for freeing the allocated buffers. This could lead to issues if there are more than one outstanding login buffer requests, which is possible if a login request times out. If a login request times out, then there is another call to send login. The send login function makes a call to the login buffer release function. In the past, this freed the buffers but did not DMA unmap. Therefore, the VIOS could still write to the old login (now freed) buffer. It is for this reason that it is a good idea to leave the DMA unmap call to the login buffers release function. Since the login buffer release functions now handle DMA unmapping, remove the duplicate DMA unmapping in handle_login_rsp(). Fixes: dff515a3 ("ibmvnic: Harden device login requests") Signed-off-by:
-
Nick Child authored
If the LOGIN CRQ fails to send then we must DMA unmap the response buffer. Previously, if the CRQ failed then the memory was freed without DMA unmapping. Fixes: c98d9cc4 ("ibmvnic: send_login should check for crq errors") Signed-off-by:
-
Nick Child authored
Ensure that all offsets in a login response buffer are within the size of the allocated response buffer. Any offsets or lengths that surpass the allocation are likely the result of an incomplete response buffer. In these cases, a full reset is necessary. When attempting to login, the ibmvnic device will allocate a response buffer and pass a reference to the VIOS. The VIOS will then send the ibmvnic device a LOGIN_RSP CRQ to signal that the buffer has been filled with data. If the ibmvnic device does not get a response in 20 seconds, the old buffer is freed and a new login request is sent. With 2 outstanding requests, any LOGIN_RSP CRQ's could be for the older login request. If this is the case then the login response buffer (which is for the newer login request) could be incomplete and contain invalid data. Therefore, we must enforce strict sanity checks on the response buffer values. Testing has shown that the `off_rxadd_buff_size` value is filled in last by the VIOS and will be the smoking gun for these circumstances. Until VIOS can implement a mechanism for tracking outstanding response buffers and a method for mapping a LOGIN_RSP CRQ to a particular login response buffer, the best ibmvnic can do in this situation is perform a full reset. Fixes: dff515a3 ("ibmvnic: Harden device login requests") Signed-off-by:
-
Souradeep Chakrabarti authored
When unloading the MANA driver, mana_dealloc_queues() waits for the MANA hardware to complete any inflight packets and set the pending send count to zero. But if the hardware has failed, mana_dealloc_queues() could wait forever. Fix this by adding a timeout to the wait. Set the timeout to 120 seconds, which is a somewhat arbitrary value that is more than long enough for functional hardware to complete any sends. Cc: stable@vger.kernel.org Fixes: ca9c54d2 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by:
Souradeep Chakrabarti <schakrabarti@linux.microsoft.com> Link: https://lore.kernel.org/r/1691576525-24271-1-git-send-email-schakrabarti@linux.microsoft.comSigned-off-by:
-
Pablo Neira Ayuso authored
Ditch it, it has been replace it by the GC transaction API and it has no clients anymore. Signed-off-by:Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Set on the NFT_SET_ELEM_DEAD_BIT flag on this element, instead of performing element removal which might race with an ongoing transaction. Enable gc when dynamic flag is set on since dynset deletion requires garbage collection after this patch. Fixes: d0a8d877 ("netfilter: nft_dynset: support for element deletion") Signed-off-by:
-
Pablo Neira Ayuso authored
Use the GC transaction API to replace the old and buggy gc API and the busy mark approach. No set elements are removed from async garbage collection anymore, instead the _DEAD bit is set on so the set element is not visible from lookup path anymore. Async GC enqueues transaction work that might be aborted and retried later. rbtree and pipapo set backends does not set on the _DEAD bit from the sync GC path since this runs in control plane path where mutex is held. In this case, set elements are deactivated, removed and then released via RCU callback, sync GC never fails. Fixes: 3c4287f6 ("nf_tables: Add set type for arbitrary concatenation of ranges") Fixes: 8d8540c4 ("netfilter: nft_set_rbtree: add timeout support") Fixes: 9d098292 ("netfilter: nft_hash: add support for timeouts") Signed-off-by:
-
Pablo Neira Ayuso authored
The set types rhashtable and rbtree use a GC worker to reclaim memory. From system work queue, in periodic intervals, a scan of the table is done. The major caveat here is that the nft transaction mutex is not held. This causes a race between control plane and GC when they attempt to delete the same element. We cannot grab the netlink mutex from the work queue, because the control plane has to wait for the GC work queue in case the set is to be removed, so we get following deadlock: cpu 1 cpu2 GC work transaction comes in , lock nft mutex `acquire nft mutex // BLOCKS transaction asks to remove the set set destruction calls cancel_work_sync() cancel_work_sync will now block forever, because it is waiting for the mutex the caller already owns. This patch adds a new API that deals with garbage collection in two steps: 1) Lockless GC of expired elements sets on the NFT_SET_ELEM_DEAD_BIT so they are not visible via lookup. Annotate current GC sequence in the GC transaction. Enqueue GC transaction work as soon as it is full. If ruleset is updated, then GC transaction is aborted and retried later. 2) GC work grabs the mutex. If GC sequence has changed then this GC transaction lost race with control plane, abort it as it contains stale references to objects and let GC try again later. If the ruleset is intact, then this GC transaction deactivates and removes the elements and it uses call_rcu() to destroy elements. Note that no elements are removed from GC lockless path, the _DEAD bit is set and pointers are collected. GC catchall does not remove the elements anymore too. There is a new set->dead flag that is set on to abort the GC transaction to deal with set->ops->destroy() path which removes the remaining elements in the set from commit_release, where no mutex is held. To deal with GC when mutex is held, which allows safe deactivate and removal, add sync GC API which releases the set element object via call_rcu(). This is used by rbtree and pipapo backends which also perform garbage collection from control plane path. Since element removal from sets can happen from control plane and element garbage collection/timeout, it is necessary to keep the set structure alive until all elements have been deactivated and destroyed. We cannot do a cancel_work_sync or flush_work in nft_set_destroy because its called with the transaction mutex held, but the aforementioned async work queue might be blocked on the very mutex that nft_set_destroy() callchain is sitting on. This gives us the choice of ABBA deadlock or UaF. To avoid both, add set->refs refcount_t member. The GC API can then increment the set refcount and release it once the elements have been free'd. Set backends are adapted to use the GC transaction API in a follow up patch entitled: ("netfilter: nf_tables: use gc transaction API in set backends") This is joint work with Florian Westphal. Fixes: cfed7e1b ("netfilter: nf_tables: add set garbage collection helpers") Signed-off-by: -
git://git.samba.org/ksmbdLinus Torvalds authored
Pull smb server fixes from Steve French: "Two ksmbd server fixes, both also for stable: - improve buffer validation when multiple EAs returned - missing check for command payload size" * tag '6.5-rc5-ksmbd-server' of git://git.samba.org/ksmbd: ksmbd: fix wrong next length validation of ea buffer in smb2_set_ea() ksmbd: validate command request size
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v6.5-3-2023-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Revert a patch that unconditionally resolved addresses to inlines in callchains, something that was done before when DWARF mode was asked for, but could as well be done when just frame pointers (the default) was selected. This enriches the callchains with inlines but the way to resolve it is gross right now, relying on addr2line, and even if we come up with an efficient way of processing all the associated DWARF info for a big file as vmlinux is, this has to be something people opt-in, as it will still result in overheads, so revert it until we get this done in a saner way. - Update the x86 msr-index.h header with the kernel original, no change in tooling output, just addresses a tools/perf build warning. - Resolve a regression where special "tool events", such as "duration_time" were being presented for all CPUs, when it only makes sense to show it for the workload, that is, just once. * tag 'perf-tools-fixes-for-v6.5-3-2023-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf stat: Don't display zero tool counts tools arch x86: Sync the msr-index.h copy with the kernel sources Revert "perf report: Append inlines to non-DWARF callchains"
-
Martin KaFai Lau authored
Xu Kuohai says: ==================== bug fixes and a new test case for sockmap. v3: fix bpf ci failure v2: https://lore.kernel.org/bpf/20230803064838.108784-1-xukuohai@huaweicloud.com add a test case v1: https://lore.kernel.org/bpf/20230728105649.3978774-1-xukuohai@huaweicloud.com https://lore.kernel.org/bpf/20230728105717.3978849-1-xukuohai@huaweicloud.com ==================== Signed-off-by:
Martin KaFai Lau <martin.lau@kernel.org>
-
Xu Kuohai authored
Add a test case to check whether sockmap redirection works correctly when data length returned by stream_parser is less than skb->len. In addition, this test checks whether strp_done is called correctly. The reason is that we returns skb->len - 1 from the stream_parser, so the last byte in the skb will be held by strp->skb_head. Therefore, if strp_done is not called to free strp->skb_head, we'll get a memleak warning. Signed-off-by:
Xu Kuohai <xukuohai@huawei.com> Link: https://lore.kernel.org/r/20230804073740.194770-5-xukuohai@huaweicloud.comSigned-off-by:
-
Xu Kuohai authored
BPF CI has reported the following failure: Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir ./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected vsock_unix_redir_connectible:FAIL:1506 ./test_progs:vsock_unix_redir_connectible:1506: ingress: write: Transport endpoint is not connected vsock_unix_redir_connectible:FAIL:1506 ./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected vsock_unix_redir_connectible:FAIL:1506 ./test_progs:vsock_unix_redir_connectible:1514: ingress: recv() err, errno=11 vsock_unix_redir_connectible:FAIL:1514 ./test_progs:vsock_unix_redir_connectible:1518: ingress: vsock socket map failed, a != b vsock_unix_redir_connectible:FAIL:1518 ./test_progs:vsock_unix_redir_connectible:1525: ingress: want pass count 1, have 0 It’s because the recv(... MSG_DONTWAIT) syscall in the test case is called before the queued work sk_psock_backlog() in the kernel finishes executing. So the data to be read is still queued in psock->ingress_skb and cannot be read by the user program. Therefore, the non-blocking recv() reads nothing and reports an EAGAIN error. So replace recv(... MSG_DONTWAIT) with xrecv_nonblock(), which calls select() to wait for data to be readable or timeout before calls recv(). Fixes: d61bd8c1 ("selftests/bpf: add a test case for vsock sockmap") Signed-off-by:
-
Xu Kuohai authored
strp_done is only called when psock->progs.stream_parser is not NULL, but stream_parser was set to NULL by sk_psock_stop_strp(), called by sk_psock_drop() earlier. So, strp_done can never be called. Introduce SK_PSOCK_RX_ENABLED to mark whether there is strp on psock. Change the condition for calling strp_done from judging whether stream_parser is set to judging whether this flag is set. This flag is only set once when strp_init() succeeds, and will never be cleared later. Fixes: c0d95d33 ("bpf, sockmap: Re-evaluate proto ops when psock is removed from sockmap") Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20230804073740.194770-3-xukuohai@huaweicloud.comSigned-off-by:
-
Xu Kuohai authored
sock_map_del_link() operates on both SOCKMAP and SOCKHASH, although both types have member named "progs", the offset of "progs" member in these two types is different, so "progs" should be accessed with the real map type. Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by:
-
Magnus Karlsson authored
Fix a refcount underflow problem reported by syzbot that can happen when a system is running out of memory. If xp_alloc_tx_descs() fails, and it can only fail due to not having enough memory, then the error path is triggered. In this error path, the refcount of the pool is decremented as it has incremented before. However, the reference to the pool in the socket was not nulled. This means that when the socket is closed later, the socket teardown logic will think that there is a pool attached to the socket and try to decrease the refcount again, leading to a refcount underflow. I chose this fix as it involved adding just a single line. Another option would have been to move xp_get_pool() and the assignment of xs->pool to after the if-statement and using xs_umem->pool instead of xs->pool in the whole if-statement resulting in somewhat simpler code, but this would have led to much more churn in the code base perhaps making it harder to backport. Fixes: ba3beec2 ("xsk: Fix possible crash when multiple sockets are created") Reported-by: syzbot+8ada0057e69293a05fd4@syzkaller.appspotmail.com Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/r/20230809142843.13944-1-magnus.karlsson@gmail.comSigned-off-by:
-
- 09 Aug, 2023 12 commits
-
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Improve the taprio qdisc's relationship with its children v1: https://lore.kernel.org/lkml/20230531173928.1942027-1-vladimir.oltean@nxp.com/ Prompted by Vinicius' request to consolidate some child Qdisc dereferences in taprio: https://lore.kernel.org/netdev/87edmxv7x2.fsf@intel.com/ I remembered that I had left some unfinished work in this Qdisc, namely commit af7b29b1 ("Revert "net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs""). This patch set represents another stab at, essentially, what's in the title. Not only does taprio not properly detect when it's grafted as a non-root qdisc, but it also returns incorrect per-class stats. Eventually, Vinicius' request is addressed too, although in a different form than the one he requested (which was purely cosmetic). Review from people more experienced with Qdiscs than me would be appreciated. I tried my best to explain what I consider to be problems. I am deliberately targeting net-next because the changes are too invasive for net - they were reverted from stable once already. ==================== Link: https://lore.kernel.org/r/20230807193324.4128292-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
The reason behind commit af7b29b1 ("Revert "net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"") was that the patch it reverted caused a crash when attaching a CBS shaper to one of the taprio classes. Prevent that from happening again by adding a test case for it, which now passes correctly in both offload and software modes. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Pedro Tammela <pctammela@mojatatu.com> Link: https://lore.kernel.org/r/20230807193324.4128292-12-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
Check that the "Can only be attached as root qdisc" error message from taprio is effective by attempting to attach it to a class of another taprio qdisc. That operation should fail. In the bug that was squashed by change "net/sched: taprio: try again to report q->qdiscs[] to qdisc_leaf()", grafting a child taprio to a root software taprio would be misinterpreted as a change() to the root taprio. Catch this by looking at whether the base-time of the root taprio has changed to follow the base-time of the child taprio, something which should have absolutely never happened assuming correct semantics. Vinicius points out that looking at "base_time" in the tc qdisc show output is unreliable because user space is in a race with the kernel applying the setting. So we create a helper bash script which waits while there is any pending schedule. Link: https://lore.kernel.org/netdev/87il9w0xx7.fsf@intel.com/Signed-off-by:
-
Vladimir Oltean authored
For offloaded tc-taprio testing with netdevsim, the mock-up PHC driver is used. Suggested-by:
Victor Nogueira <victor@mojatatu.com> Signed-off-by:
-
Vladimir Oltean authored
To be able to use netdevsim for tc-testing with an offloaded tc-taprio schedule, it needs to report a PTP clock (which it now does), and to accept ndo_setup_tc(TC_SETUP_QDISC_TAPRIO) calls. Since netdevsim has no packet I/O, this doesn't do anything intelligent, it only allows taprio offload code paths to go through some level of automated testing. Signed-off-by:
-
Vladimir Oltean authored
I'd like to make netdevsim offload tc-taprio, but currently, this Qdisc emits a ETHTOOL_GET_TS_INFO call to the driver to make sure that it has a PTP clock, so that it is reasonably capable of offloading the schedule. By using the mock PHC driver, that becomes possible. Hardware timestamping is not necessary, and netdevsim does not support packet I/O anyway. Signed-off-by:
-
Vladimir Oltean authored
There are several cases where virtual net devices may benefit from having a PTP clock, and these have to do with testing. I can see at least netdevsim and veth as potential users of a common mock-up PTP hardware clock driver. The proposed idea is to create an object which emulates PTP clock operations on top of the unadjustable CLOCK_MONOTONIC_RAW plus a software-controlled time domain via a timecounter/cyclecounter and then link that PHC to the netdevsim device. The driver is fully functional for its intended purpose, and it successfully passes the PTP selftests. $ cd tools/testing/selftests/ptp/ $ ./phc.sh /dev/ptp2 TEST: settime [ OK ] TEST: adjtime [ OK ] TEST: adjfreq [ OK ] Signed-off-by:
-
Vladimir Oltean authored
This makes a difference for the software scheduling mode, where dev_queue->qdisc_sleeping is the same as the taprio root Qdisc itself, but when we're talking about what Qdisc and stats get reported for a traffic class, the root taprio isn't what comes to mind, but q->qdiscs[] is. To understand the difference, I've attempted to send 100 packets in software mode through class 8001:5, and recorded the stats before and after the change. Here is before: $ tc -s class show dev eth0 class taprio 8001:1 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:2 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:3 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:4 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:5 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:6 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:7 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:8 root leaf 8001: Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 and here is after: class taprio 8001:1 root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:2 root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:3 root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:4 root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:5 root Sent 9400 bytes 100 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:6 root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:7 root Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 class taprio 8001:8 root leaf 800d: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 window_drops 0 The most glaring (and expected) difference is that before, all class stats reported the global stats, whereas now, they really report just the counters for that traffic class. Finally, Pedro Tammela points out that there is a tc selftest which checks specifically which handle do the child Qdiscs corresponding to each class have. That's changing here - taprio no longer reports tcm->tcm_info as the same handle "1:" as itself (the root Qdisc), but 0 (the handle of the default pfifo child Qdiscs). Since iproute2 does not print a child Qdisc handle of 0, adjust the test's expected output. Link: https://lore.kernel.org/netdev/3b83fcf6-a5e8-26fb-8c8a-ec34ec4c3342@mojatatu.com/Signed-off-by:
-
Vladimir Oltean authored
As mentioned in commit af7b29b1 ("Revert "net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"") - unlike mqprio, taprio doesn't use q->qdiscs[] only as a temporary transport between Qdisc_ops :: init() and Qdisc_ops :: attach(). Delete the comment, which is just stolen from mqprio, but there, the usage patterns are a lot different, and this is nothing but confusing. Signed-off-by:
-
Vladimir Oltean authored
This is another stab at commit 1461d212 ("net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"), later reverted in commit af7b29b1 ("Revert "net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs""). I believe that the problems that caused the revert were fixed, and thus, this change is identical to the original patch. Its purpose is to properly reject attaching a software taprio child qdisc to a software taprio parent. Because unoffloaded taprio currently reports itself (the root Qdisc) as the return value from qdisc_leaf(), then the process of attaching another taprio as child to a Qdisc class of the root will just result in a Qdisc_ops :: change() call for the root. Whereas that's not we want. We want Qdisc_ops :: init() to be called for the taprio child, in order to give the taprio child a chance to check whether its sch->parent is TC_H_ROOT or not (and reject this configuration). Signed-off-by:
-
Vladimir Oltean authored
Normally, Qdiscs have one reference on them held by their owner and one held for each TXQ to which they are attached, however this is not the case with the children of an offloaded taprio. Instead, the taprio qdisc currently lives in the following fragile equilibrium. In the software scheduling case, taprio attaches itself (the root Qdisc) to all TXQs, thus having a refcount of 1 + the number of TX queues. In this mode, the q->qdiscs[] children are not visible directly to the Qdisc API. The lifetime of the Qdiscs from this private array lasts until qdisc_destroy() -> taprio_destroy(). In the fully offloaded case, the root taprio has a refcount of 1, and all child q->qdiscs[] also have a refcount of 1. The child q->qdiscs[] are attached to the netdev TXQs directly and thus are visible to the Qdisc API, however taprio loses a reference to them very early - during qdisc_graft(parent==NULL) -> taprio_attach(). At that time, taprio frees the q->qdiscs[] array to not leak memory, but interestingly, it does not release a reference on these qdiscs because it doesn't effectively own them - they are created by taprio but owned by the Qdisc core, and will be freed by qdisc_graft(parent==NULL, new==NULL) -> qdisc_put(old) when the Qdisc is deleted or when the child Qdisc is replaced with something else. My interest is to change this equilibrium such that taprio also owns a reference on the q->qdiscs[] child Qdiscs for the lifetime of the root Qdisc, including in full offload mode. I want this because I would like taprio_leaf(), taprio_dump_class(), taprio_dump_class_stats() to have insight into q->qdiscs[] for the software scheduling mode - currently they look at dev_queue->qdisc_sleeping, which is, as mentioned, the same as the root taprio. The following set of changes is necessary: - don't free q->qdiscs[] early in taprio_attach(), free it late in taprio_destroy() for consistency with software mode. But: - currently that's not possible, because taprio doesn't own a reference on q->qdiscs[]. So hold that reference - once during the initial attach() and once during subsequent graft() calls when the child is changed. - always keep track of the current child in q->qdiscs[], even for full offload mode, so that we free in taprio_destroy() what we should, and not something stale. Signed-off-by:
-
Vladimir Oltean authored
This is a simple code transformation with no intended behavior change, just to make it absolutely clear that q->qdiscs[] is only attached to the child taprio classes in full offload mode. Right now we use the q->qdiscs[] variable in taprio_attach() for software mode too, but that is quite confusing and avoidable. We use it only to reach the netdev TX queue, but we could as well just use netdev_get_tx_queue() for that. Signed-off-by:
-
