ASUS UX550VE (SSID 1043:1970) requires a similar workaround for
managing the routing of the 4 speakers like some other ASUS models.
Add a corresponding quirk entry for fixing it.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212641
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211107083339.18013-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Like the previous fix (commit c0317c0e "ALSA: timer: Fix
use-after-free problem"), we have to unlink slave timer instances
immediately at snd_timer_stop(), too.  Otherwise it may leave a stale
entry in the list if the slave instance is freed before actually
running.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211105091517.21733-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Although we've covered all calls with NULL dma buffer pointer, so far,
there may be still some else in the wild.  For catching such a case
more easily, add a WARN_ON_ONCE() in snd_dma_get_ops().

Fixes: 37af81c5 ("ALSA: core: Abstract memory alloc helpers")
Link: https://lore.kernel.org/r/20211105102103.28148-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

This reverts commit 2d9ea399.

We've got a regression report showing that the audio got broken the
device over AMD IOMMU.  The conversion assumed the wrong pointer /
page mapping for the indirect mapping case, and we need to correct
this urgently, so let's revert it for now.

Fixes: 2d9ea399 ("ALSA: memalloc: Convert x86 SG-buffer handling with non-contiguous type")
Reported-and-tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Link: https://lore.kernel.org/r/20211104180846.16340-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Another model requires ALC255_FIXUP_ACER_MIC_NO_PRESENCE fixup.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211853Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211104155726.2090997-1-perex@perex.czSigned-off-by: Takashi Iwai <tiwai@suse.de>

Mark of the Unicorn (MOTU) shipped Traveler mk3 as one of models in third
generation of its FireWire series, and discontinued it already. The model
consists of below ICs:

 * Texas Instruments TSB41AB2
 * Phillips Semiconductors PDI1394L40
 * Altera cyclone EP1C3
 * Texas Instruments TMS320VC5402

It supports sampling transfer frequency up to 192.0 kHz. The packet
format differs depending on both of current sampling transfer frequency
and whether to enable ADAT channels in rx/tx packets. The model supports
transmission of PCM frames as well as MIDI messages.

The model supports command mechanism to configure internal DSP. Hardware
meter information is available in the first 2 chunks of each data block
of tx packet.

This commit adds support for it.

$ cd linux-firewire-tools/src
$ python crpp < /sys/bus/firewire/devices/fw1/config_rom
               ROM header and bus information block
               -----------------------------------------------------------------
400  0410af0a  bus_info_length 4, crc_length 16, crc 44810
404  31333934  bus_name "1394"
408  20ff7000  irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256)
40c  0001f200  company_id 0001f2     |
410  00090911  device_id 0000090911  | EUI-64 0001f20000090911

               root directory
               -----------------------------------------------------------------
414  0004ef04  directory_length 4, crc 61188
418  030001f2  vendor
41c  0c0083c0  node capabilities per IEEE 1394
420  d1000002  --> unit directory at 428
424  8d000005  --> eui-64 leaf at 438

               unit directory at 428
               -----------------------------------------------------------------
428  00031733  directory_length 3, crc 5939
42c  120001f2  specifier id
430  1300001b  version
434  17102800  model

               eui-64 leaf at 438
               -----------------------------------------------------------------
438  00028484  leaf_length 2, crc 33924
43c  0001f200  company_id 0001f2     |
440  00090911  device_id 0000090911  | EUI-64 0001f20000090911
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211104110627.94469-1-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

On Clevo NH77HJ, NH77HP, and their 15" variants, there is a headset
microphone input attached to 0x19 that does not have a jack detect. In
order to get it working, the pin configuration needs to be set
correctly, and a new ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE fixup is
applied. This is similar to the existing System76 quirk for ALC293, but
for ALC256.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211102172104.10610-1-tcrawford@system76.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

When the timer instance was add into ack_list but was not currently in
process, the user could stop it via snd_timer_stop1() without delete it
from the ack_list. Then the user could free the timer instance and when
it was actually processed UAF occurred.

This issue could be reproduced via testcase snd_timer01 in ltp - running
several instances of that testcase at the same time.

What I actually met was that the ack_list of the timer broken and the
kernel went into deadloop with irqoff. That could be detected by
hardlockup detector on board or when we run it on qemu, we could use gdb
to dump the ack_list when the console has no response.

To fix this issue, we delete the timer instance from ack_list and
active_list unconditionally in snd_timer_stop1().
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211103033517.80531-1-wangwensheng4@huawei.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Audient iD14 (2708:0002) may get a control message error that
interferes the operation e.g. with alsactl.  Add the quirk to ignore
such errors like other devices.

BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1191247
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211102161859.19301-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Apply the PB51ED PCI quirk to the Clevo PC70HS. Fixes audio output from
the internal speakers.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211101162134.5336-1-tcrawford@system76.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-v5.16' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.16

This is an unusually large set of updates, mostly a large crop of
unusually big drivers coupled with extensive overhauls of existing code.
There's a SH change here for the DAI format terminology, the change is
straightforward and the SH maintainers don't seem very active.

 - A new version of the audio graph card which supports a wider range of
   systems.
 - Move of the Cirrus DSP framework into drivers/firmware to allow for
   future use by non-audio DSPs.
 - Several conversions to YAML DT bindings.
 - Continuing cleanups to the SOF and Intel code.
 - A very big overhaul of the cs42l42 driver, correcting many problems.
 - Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
   MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
   Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
   RT5682S, and RT9120 and Rockchip RV1126 and RK3568

Adding the Line6 HX-Stomp XL USB_ID as it needs this fixed frequency
quirk as well.

The device is basically just the HX-Stomp with some more buttons on
the face.  I've done some recording with it after adding it, and it
seems to function properly with this fix.  The Midi features appear to
be working as well.

[ a coding style fix and patch reformat by tiwai ]
Signed-off-by: Jason Ormes <skryking@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211030200405.1358678-1-skryking@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add another device ID for JBL Quantum 400. It requires the same quirk as
other JBL Quantum devices.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211030174308.1011825-1-alexander@tsoy.meSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge 5.16-devel branch for upstreaming
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Support multiple headphone drivers in same machine driver. In this
case, both rt5682 and rt5682s are supported and enumerated by different
ACPI HID "10EC5682" and "RTL5682".

V2 Changes:
- remove useless 'NULL', 'false' in if-condition
- can use 'comp_ids' field alone to enumerate driver
- add comma to the end of entry in structure initialization
- keep the table of byt/cht/cml/icl untouched

V3 Changes:
- upstreamd from SOF github, PR#3200
- use new compatiable IDs to shrink the enumerate table of BYT and CHT
- add 'const' to snd_soc_acpi_codecs structures

V4 Changes:
- add signoff to patch 4~6

V5 Changes:
- none, just rebase for patch 3 conflict

Brent Lu (3):
  ASoC: soc-acpi: add comp_ids field for machine driver matching
  ASoC: Intel: sof_rt5682: detect codec variant in probe function
  ASoC: Intel: sof_rt5682: use comp_ids to enumerate rt5682s

Pierre-Louis Bossart (3):
  ASoC: Intel: soc-acpi-byt: shrink tables using compatible IDs
  ASoC: Intel: soc-acpi-cht: shrink tables using compatible IDs
  ASoC: Intel: soc-acpi: use const for all uses of snd_soc_acpi_codecs

 include/sound/soc-acpi.h                      |  3 +
 sound/soc/intel/boards/sof_rt5682.c           | 34 ++-------
 .../intel/common/soc-acpi-intel-adl-match.c   | 11 ++-
 .../intel/common/soc-acpi-intel-bxt-match.c   |  2 +-
 .../intel/common/soc-acpi-intel-byt-match.c   | 68 +++++++-----------
 .../intel/common/soc-acpi-intel-cht-match.c   | 69 +++++++------------
 .../intel/common/soc-acpi-intel-cml-match.c   |  8 +--
 .../intel/common/soc-acpi-intel-glk-match.c   |  2 +-
 .../intel/common/soc-acpi-intel-jsl-match.c   | 43 ++++--------
 .../intel/common/soc-acpi-intel-kbl-match.c   | 12 ++--
 .../intel/common/soc-acpi-intel-skl-match.c   |  2 +-
 .../intel/common/soc-acpi-intel-tgl-match.c   | 11 ++-
 sound/soc/soc-acpi.c                          | 24 ++++++-
 13 files changed, 119 insertions(+), 170 deletions(-)

--
2.25.1

Merge series "ASoC: Sanity checks and soc-topology updates" from Cezary Rojewski <cezary.rojewski@intel.com>:

Couple of soc-topology related changes and a use-after-free fix. Said fix
and two sanity checks for soc-topology lead the way. While the
use-after-free is quite obvious, the sanity checks are here to cover for
cases where user malformed the topology file -or- access to filesystem
somehow got interrupted during copy operation. We shouldn't be reading
outside the file boundary.

Afterward a change to soc_tplg_add_kcontrol(): device being passed to
soc_tplg_add_dcontrol() from comp->dev to tplg->dev which corrects
dev_xxx() invoked later on.
Also, device used for topology memory allocations from component->dev to
component->card->dev so memory gets freed each time card device (usually
platform device) is removed rather than the component device what may
happen less frequently.

Dummy component gets smarter and no longer overrides hw_params if
there are other components accociated with related struct
snd_soc_pcm_runtime instance.

Amadeusz Sławiński (5):
  ASoC: core: Remove invalid snd_soc_component_set_jack call
  ASoC: topology: Check for dapm widget completeness
  ASoC: topology: Use correct device for prints
  ASoC: topology: Change topology device to card device
  ASoC: Stop dummy from overriding hwparams

Cezary Rojewski (1):
  ASoC: topology: Add header payload_size verification

 sound/soc/soc-core.c     |  3 ---
 sound/soc/soc-topology.c | 34 ++++++++++++++++++++++++++++++----
 sound/soc/soc-utils.c    | 13 +++++++++++++
 3 files changed, 43 insertions(+), 7 deletions(-)

--
2.25.1

If we return before the end of the 'for_each_child_of_node()' iterator, the
reference taken on 'np' must be released.

Add the missing 'of_node_put()' call.

Fixes: c413983e ("ASoC: rsnd: adjust disabled module")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/4c0e893cbfa21dc76c1ede0b6f4f8cff42209299.1634586167.git.christophe.jaillet@wanadoo.frSigned-off-by: Mark Brown <broonie@kernel.org>

Up to now aic3x_remove() returns zero unconditionally. Make it return
void instead which makes it easier to see in the callers that there is
no error to handle.

Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211019074125.3812513-1-u.kleine-koenig@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

'const' qualifiers are missing on some platforms, add as needed.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20211029171409.611600-7-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

We have multiple entries for the same codecs, use the new compatible
IDs to have a single entry.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20211029171409.611600-6-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

We have multiple entries for the same codecs, use the new compatible
IDs to have a single entry.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20211029171409.611600-5-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use comp_ids field to enumerate rt5682/rt5682s headphone codec for
JSL/TGL/ADL devices and remove redundant entries in tables.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20211029171409.611600-4-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Detect whether the headphone codec is ALC5682I-VS or not in probe
function so we don't need to duplicate all board configs for this new
variant.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20211029171409.611600-3-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

A machine driver needs to be enumerated by more than one ACPI HID if
it supports second headphone driver (i.e. rt5682 and rt5682s).
However, the id field in snd_soc_acpi_mach structure could contain
only one HID. By adding a 'comp_ids' field which can contain several
HIDs, we can enumerate a machine driver by multiple ACPI HIDs.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20211029171409.611600-2-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds document for mt8195 board with mt6359, rt1011 and rt5682
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20211020071428.14297-3-trevor.wu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds support for mt8195 board with mt6359, rt1011 and rt5682.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20211020071428.14297-2-trevor.wu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

In case that there are other components assigned to runtime device,
depending on order dummy component can override their params with its
own, which shouldn't happen. Check if there are any other components
assigned to rtd and if so, skip setting hwparams.

Occurs when using topology where 'snd-soc-dummy' gets assigned by
default as codec and platform component.

Alternative approach would be to copy whole dummy handling and rename it
to "snd-soc-null" or something similar. And remove hwparams assignment
to make it really do nothing.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211015161257.27052-7-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Topology needs device for prints and resource allocation. So far,
component->dev is used. However, this may lead to high memory use in
model where card is an independent driver which can be reloaded and
topology is loaded from component's probe() method. Every time machine
driver is reloaded topology is being loaded anew, each time allocating
new memory. Said memory will only be freed when component itself is
being freed.

Address the problem by tying topology to component->card->dev instead,
so memory occupied by the topology is freed whenever related machine
device gets removed.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211015161257.27052-6-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

soc_tplg_add_dcontrol() passes device as argument which is later used to
print messages. Align it with all other prints in file to use tplg->dev.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211015161257.27052-5-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add sanity checks to make sure the data is read within file boundary.
Helps in situations where file is only partially copied or malformed.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211015161257.27052-4-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add sanity check to make sure the data is read within file boundary.
Helps in situations where file is only partially copied or malformed.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211015161257.27052-3-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

If snd_soc_component_set_jack() is called after
snd_soc_component_remove() it may operate on memory which is freed in
->remove handler.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211015161257.27052-2-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

TFA9897 has an internal 'rcv' switch so that it can manage both
loudspeaker and earpiece modes with the same physical speaker.
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
Link: https://lore.kernel.org/r/20211024085840.1536438-3-vincent.knecht@mailoo.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The acp-platform driver now needs the ACPI helpers:

ld.lld: error: undefined symbol: snd_soc_acpi_find_machine
>>> referenced by acp-platform.c
>>>               soc/amd/acp/acp-platform.o:(acp_machine_select) in archive sound/built-in.a

ld.lld: error: undefined symbol: snd_soc_acpi_codec_list
>>> referenced by acp-renoir.c
>>>               soc/amd/acp/acp-renoir.o:(snd_soc_acpi_amd_acp_machines) in archive sound/built-in.a

Other drivers using this interface, select SND_SOC_ACPI, so do the
same thing here.

Fixes: e646b51f ("ASoC: amd: acp: Add callback for machine driver on ACP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211029113714.966823-1-arnd@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: cs42l42: Fix definition and handling of jack switch invert" from Richard Fitzgerald <rf@opensource.cirrus.com>:

Summary: The driver applied the opposite of the DT setting to the
wrong register bit.

The jack plug detect hardware in cs42l42 is somewhat confusing,
compounded by an unclear description in the datasheet. This is most
likely the reason that the driver implemented a DT property for the
wrong register bit, that had the opposite effect of what was
described in the binding.

Changing the meaning of the property values isn't feasible; the
driver dates from 2016 and the risk of breaking out-of-tree configs
is too high (the property is also available to ACPI systems).

So the fix is to make the binding doc match the actual behaviour and
then fix the driver to apply it to the correct register bit.

As a bonus, patch #3 converts the binding to yaml.

Richard Fitzgerald (3):
  ASoC: dt-bindings: cs42l42: Correct description of ts-inv
  ASoC: cs42l42: Correct configuring of switch inversion from ts-inv
  ASoC: dt-bindings: cs42l42: Convert binding to yaml

 .../devicetree/bindings/sound/cirrus,cs42l42.yaml  | 225 +++++++++++++++++++++
 .../devicetree/bindings/sound/cs42l42.txt          | 114 -----------
 MAINTAINERS                                        |   1 +
 sound/soc/codecs/cs42l42.c                         |   9 +-
 4 files changed, 230 insertions(+), 119 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml
 delete mode 100644 Documentation/devicetree/bindings/sound/cs42l42.txt

--
2.11.0

Detect the codec variant in probe function and update DAI link
accordingly. Also add an new entry in enumeration table for machine
driver enumeration.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211028140909.496022-1-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

When SND_SOC_MT8192_MT6359_RT1015_RT5682,
SND_SOC_MT8192_MT6359_RT1015_RT5682,
SND_SOC_MT8183_DA7219_MAX98357A, or
SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A is selected,
and GPIOLIB is not selected, Kbuild gives the following
warnings, respectively:

WARNING: unmet direct dependencies detected for SND_SOC_DMIC
  Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n]
  Selected by [y]:
  - SND_SOC_MT8192_MT6359_RT1015_RT5682 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=y] && SND_SOC_MT8192 [=y] && MTK_PMIC_WRAP [=y]

WARNING: unmet direct dependencies detected for SND_SOC_RT1015P
  Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n]
  Selected by [y]:
  - SND_SOC_MT8192_MT6359_RT1015_RT5682 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=y] && SND_SOC_MT8192 [=y] && MTK_PMIC_WRAP [=y]

WARNING: unmet direct dependencies detected for SND_SOC_RT1015P
  Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n]
  Selected by [y]:
  - SND_SOC_MT8183_DA7219_MAX98357A [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_MT8183 [=y] && I2C [=y]

WARNING: unmet direct dependencies detected for SND_SOC_RT1015P
  Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n]
  Selected by [y]:
  - SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=y] && SND_SOC_MT8183 [=y]

This is because these config options select SND_SOC_RT1015P
without selecting or depending on GPIOLIB, despite
SND_SOC_RT1015P depending on GPIOLIB.

These unmet dependency bugs were detected by Kismet,
a static analysis tool for Kconfig. Please advise if this
is not the appropriate solution.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Acked-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20211029001225.27218-1-julianbraha@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The same codec seems to have different personalities. ESSX8316 was
used for Baytrail/CherryTrail, ESSX8336 seems to be used for AppoloLake,
GeminiLake, JasperLake and TigerLake devices.

BugLink: https://github.com/thesofproject/linux/issues/2955
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>-e
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211029011109.23633-1-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>