- 13 Mar, 2020 40 commits
-
-
Andy Shevchenko authored
BugLink: https://bugs.launchpad.net/bugs/1864773 commit c42b65e3 upstream. A lot of code become ugly because of open coding allocations for bitmaps. Introduce three helpers to allow users be more clear of intention and keep their code neat. Note, due to multiple circular dependencies we may not provide the helpers as inliners. For now we keep them exported and, perhaps, at some point in the future we will sort out header inclusion and inheritance. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Andy Shevchenko authored
BugLink: https://bugs.launchpad.net/bugs/1864773 commit e64e4018 upstream. bitmap API (include/linux/bitmap.h) has 'bitmap' prefix for its methods. On the other hand MD bitmap API is special case. Adding 'md' prefix to it to avoid name space collision. No functional changes intended. Signed-off-by:
Shaohua Li <shli@kernel.org> Signed-off-by:
-
Bo Wu authored
BugLink: https://bugs.launchpad.net/bugs/1864773 commit bba340c7 upstream. In iscsi_if_rx func, after receiving one request through iscsi_if_recv_msg func, iscsi_if_send_reply will be called to try to reply to the request in a do-while loop. If the iscsi_if_send_reply function keeps returning -EAGAIN, a deadlock will occur. For example, a client only send msg without calling recvmsg func, then it will result in the watchdog soft lockup. The details are given as follows: sock_fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_ISCSI); retval = bind(sock_fd, (struct sock addr*) & src_addr, sizeof(src_addr); while (1) { state_msg = sendmsg(sock_fd, &msg, 0); //Note: recvmsg(sock_fd, &msg, 0) is not processed here. } close(sock_fd); watchdog: BUG: soft lockup - CPU#7 stuck for 22s! [netlink_test:253305] Sample time: 4000897528 ns(HZ: 250) Sample stat: curr: user: 675503481560, nice: 321724050, sys: 448689506750, idle: 4654054240530, iowait: 40885550700, irq: 14161174020, softirq: 8104324140, st: 0 deta: user: 0, nice: 0, sys: 3998210100, idle: 0, iowait: 0, irq: 1547170, softirq: 242870, st: 0 Sample softirq: TIMER: 992 SCHED: 8 Sample irqstat: irq 2: delta 1003, curr: 3103802, arch_timer CPU: 7 PID: 253305 Comm: netlink_test Kdump: loaded Tainted: G OE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 40400005 (nZcv daif +PAN -UAO) pc : __alloc_skb+0x104/0x1b0 lr : __alloc_skb+0x9c/0x1b0 sp : ffff000033603a30 x29: ffff000033603a30 x28: 00000000000002dd x27: ffff800b34ced810 x26: ffff800ba7569f00 x25: 00000000ffffffff x24: 0000000000000000 x23: ffff800f7c43f600 x22: 0000000000480020 x21: ffff0000091d9000 x20: ffff800b34eff200 x19: ffff800ba7569f00 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0001000101000100 x13: 0000000101010000 x12: 0101000001010100 x11: 0001010101010001 x10: 00000000000002dd x9 : ffff000033603d58 x8 : ffff800b34eff400 x7 : ffff800ba7569200 x6 : ffff800b34eff400 x5 : 0000000000000000 x4 : 00000000ffffffff x3 : 0000000000000000 x2 : 0000000000000001 x1 : ffff800b34eff2c0 x0 : 0000000000000300 Call trace: __alloc_skb+0x104/0x1b0 iscsi_if_rx+0x144/0x12bc [scsi_transport_iscsi] netlink_unicast+0x1e0/0x258 netlink_sendmsg+0x310/0x378 sock_sendmsg+0x4c/0x70 sock_write_iter+0x90/0xf0 __vfs_write+0x11c/0x190 vfs_write+0xac/0x1c0 ksys_write+0x6c/0xd8 __arm64_sys_write+0x24/0x30 el0_svc_common+0x78/0x130 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc Link: https://lore.kernel.org/r/EDBAAA0BBBA2AC4E9C8B6B81DEEE1D6915E3D4D2@dggeml505-mbx.china.huawei.comSigned-off-by:
Bo Wu <wubo40@huawei.com> Reviewed-by:
Zhiqiang Liu <liuzhiqiang26@huawei.com> Reviewed-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Lars Möllendorf authored
BugLink: https://bugs.launchpad.net/bugs/1864773 commit 883f6165 upstream. Previous versions of `iio_compute_scan_bytes` only aligned each element to its own length (i.e. its own natural alignment). Because multiple consecutive sets of scan elements are buffered this does not work in case the computed scan bytes do not align with the natural alignment of the first scan element in the set. This commit fixes this by aligning the scan bytes to the natural alignment of the largest scan element in the set. Fixes: 959d2952 ("staging:iio: make iio_sw_buffer_preenable much more general.") Signed-off-by:
Lars Möllendorf <lars.moellendorf@plating.de> Reviewed-by:
Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Changbin Du authored
BugLink: https://bugs.launchpad.net/bugs/1864773 commit d0695e23 upstream. Just as commit 0566e40c ("tracing: initcall: Ordered comparison of function pointers"), this patch fixes another remaining one in xen.h found by clang-9. In file included from arch/x86/xen/trace.c:21: In file included from ./include/trace/events/xen.h:475: In file included from ./include/trace/define_trace.h:102: In file included from ./include/trace/trace_events.h:473: ./include/trace/events/xen.h:69:7: warning: ordered comparison of function \ pointers ('xen_mc_callback_fn_t' (aka 'void (*)(void *)') and 'xen_mc_callback_fn_t') [-Wordered-compare-function-pointers] __field(xen_mc_callback_fn_t, fn) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/trace/trace_events.h:421:29: note: expanded from macro '__field' ^ ./include/trace/trace_events.h:407:6: note: expanded from macro '__field_ext' is_signed_type(type), filter_type); \ ^ ./include/linux/trace_events.h:554:44: note: expanded from macro 'is_signed_type' ^ Fixes: c796f213 ("xen/trace: add multicall tracing") Signed-off-by:
Changbin Du <changbin.du@gmail.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Bart Van Assche authored
BugLink: https://bugs.launchpad.net/bugs/1864773 commit 04060db4 upstream. iscsit_close_connection() calls isert_wait_conn(). Due to commit e9d3009c both functions call target_wait_for_sess_cmds() although that last function should be called only once. Fix this by removing the target_wait_for_sess_cmds() call from isert_wait_conn() and by only calling isert_wait_conn() after target_wait_for_sess_cmds(). Fixes: e9d3009c ("scsi: target: iscsi: Wait for all commands to finish before freeing a session"). Link: https://lore.kernel.org/r/20200116044737.19507-1-bvanassche@acm.orgReported-by:
Rahul Kundu <rahul.kundu@chelsio.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Tested-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Acked-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Gilles Buloz authored
BugLink: https://bugs.launchpad.net/bugs/1864773 commit 7713e62c upstream. in0 thresholds are written to the in2 thresholds registers in2 thresholds to in3 thresholds in3 thresholds to in4 thresholds in4 thresholds to in0 thresholds Signed-off-by:
Gilles Buloz <gilles.buloz@kontron.com> Link: https://lore.kernel.org/r/5de0f509.rc0oEvPOMjbfPW1w%gilles.buloz@kontron.com Fixes: 3434f378 ("hwmon: Driver for Nuvoton NCT7802Y") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1864773 commit 3111491f upstream. The driver was checking the number of endpoints of the first alternate setting instead of the current one, something which could lead to the driver binding to an invalid interface. This in turn could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 8e20cf2b ("Input: aiptek - fix crash on detecting device without endpoints") Signed-off-by:
Johan Hovold <johan@kernel.org> Acked-by:
Vladis Dronov <vdronov@redhat.com> Link: https://lore.kernel.org/r/20191210113737.4016-3-johan@kernel.orgSigned-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1864773 commit a8eeb74d upstream. The driver was checking the number of endpoints of the first alternate setting instead of the current one, something which could lead to the driver binding to an invalid interface. This in turn could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 162f98de ("Input: gtco - fix crash on detecting device without endpoints") Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1864773 commit 6b32391e upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. This in turn could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: bdb5c57f ("Input: add sur40 driver for Samsung SUR40 (aka MS Surface 2.0/Pixelsense)") Signed-off-by:
-
Michał Mirosław authored
BugLink: https://bugs.launchpad.net/bugs/1864773 commit 2a187d03 upstream. For SDHCIv3+ with programmable clock mode, minimal clock frequency is still base clock / max(divider). Minimal programmable clock frequency is always greater than minimal divided clock frequency. Without this patch, SDHCI uses out-of-spec initial frequency when multiplier is big enough: mmc1: mmc_rescan_try_freq: trying to init card at 468750 Hz [for 480 MHz source clock divided by 1024] The code in sdhci_calc_clk() already chooses a correct SDCLK clock mode. Fixes: c3ed3877 ("mmc: sdhci: add support for programmable clock mode") Cc: <stable@vger.kernel.org> # 4f6aa326: mmc: tegra: Only advertise UHS modes if IO regulator is present Cc: <stable@vger.kernel.org> Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/ffb489519a446caffe7a0a05c4b9372bd52397bb.1579082031.git.mirq-linux@rere.qmqm.plSigned-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Alex Sverdlin authored
BugLink: https://bugs.launchpad.net/bugs/1864773 commit 927d780e upstream. Scenario 1, ARMv7 ================= If code in arch/arm/kernel/ftrace.c would operate on mcount() pointer the following may be generated: 00000230 <prealloc_fixed_plts>: 230: b5f8 push {r3, r4, r5, r6, r7, lr} 232: b500 push {lr} 234: f7ff fffe bl 0 <__gnu_mcount_nc> 234: R_ARM_THM_CALL __gnu_mcount_nc 238: f240 0600 movw r6, #0 238: R_ARM_THM_MOVW_ABS_NC __gnu_mcount_nc 23c: f8d0 1180 ldr.w r1, [r0, #384] ; 0x180 FTRACE currently is not able to deal with it: WARNING: CPU: 0 PID: 0 at .../kernel/trace/ftrace.c:1979 ftrace_bug+0x1ad/0x230() ... CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.116-... #1 ... [<c0314e3d>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14) [<c03115e9>] (show_stack) from [<c051a7f1>] (dump_stack+0x81/0xa8) [<c051a7f1>] (dump_stack) from [<c0321c5d>] (warn_slowpath_common+0x69/0x90) [<c0321c5d>] (warn_slowpath_common) from [<c0321cf3>] (warn_slowpath_null+0x17/0x1c) [<c0321cf3>] (warn_slowpath_null) from [<c038ee9d>] (ftrace_bug+0x1ad/0x230) [<c038ee9d>] (ftrace_bug) from [<c038f1f9>] (ftrace_process_locs+0x27d/0x444) [<c038f1f9>] (ftrace_process_locs) from [<c08915bd>] (ftrace_init+0x91/0xe8) [<c08915bd>] (ftrace_init) from [<c0885a67>] (start_kernel+0x34b/0x358) [<c0885a67>] (start_kernel) from [<00308095>] (0x308095) ---[ end trace cb88537fdc8fa200 ]--- ftrace failed to modify [<c031266c>] prealloc_fixed_plts+0x8/0x60 actual: 44:f2:e1:36 ftrace record flags: 0 (0) expected tramp: c03143e9 Scenario 2, ARMv4T ================== ftrace: allocating 14435 entries in 43 pages ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2029 ftrace_bug+0x204/0x310 CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.5 #1 Hardware name: Cirrus Logic EDB9302 Evaluation Board [<c0010a24>] (unwind_backtrace) from [<c000ecb0>] (show_stack+0x20/0x2c) [<c000ecb0>] (show_stack) from [<c03c72e8>] (dump_stack+0x20/0x30) [<c03c72e8>] (dump_stack) from [<c0021c18>] (__warn+0xdc/0x104) [<c0021c18>] (__warn) from [<c0021d7c>] (warn_slowpath_null+0x4c/0x5c) [<c0021d7c>] (warn_slowpath_null) from [<c0095360>] (ftrace_bug+0x204/0x310) [<c0095360>] (ftrace_bug) from [<c04dabac>] (ftrace_init+0x3b4/0x4d4) [<c04dabac>] (ftrace_init) from [<c04cef4c>] (start_kernel+0x20c/0x410) [<c04cef4c>] (start_kernel) from [<00000000>] ( (null)) ---[ end trace 0506a2f5dae6b341 ]--- ftrace failed to modify [<c000c350>] perf_trace_sys_exit+0x5c/0xe8 actual: 1e:ff:2f:e1 Initializing ftrace call sites ftrace record flags: 0 (0) expected tramp: c000fb24 The analysis for this problem has been already performed previously, refer to the link below. Fix the above problems by allowing only selected reloc types in __mcount_loc. The list itself comes from the legacy recordmcount.pl script. Link: https://lore.kernel.org/lkml/56961010.6000806@pengutronix.de/ Cc: stable@vger.kernel.org Fixes: ed60453f ("ARM: 6511/1: ftrace: add ARM support for C version of recordmcount") Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Acked-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1864773 commit ba9a103f upstream. The driver was issuing synchronous uninterruptible control requests without using a timeout. This could lead to the driver hanging on probe due to a malfunctioning (or malicious) device until the device is physically disconnected. While sleeping in probe the driver prevents other devices connected to the same hub from being added to (or removed from) the bus. The USB upper limit of five seconds per request should be more than enough. Fixes: 99f83c9c ("[PATCH] USB: add driver for Keyspan Digital Remote") Signed-off-by:
-
Luuk Paulussen authored
BugLink: https://bugs.launchpad.net/bugs/1864773 commit cf3ca187 upstream. reg2volt returns the voltage that matches a given register value. Converting this back the other way with volt2reg didn't return the same register value because it used truncation instead of rounding. This meant that values read from sysfs could not be written back to sysfs to set back the same register value. With this change, volt2reg will return the same value for every voltage previously returned by reg2volt (for the set of possible input values) Signed-off-by:
Luuk Paulussen <luuk.paulussen@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20191205231659.1301-1-luuk.paulussen@alliedtelesis.co.nz cc: stable@vger.kernel.org Signed-off-by:
-
James Hughes authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit ce896476 ] As reported by Eric Dumazet, there are still some outstanding cases where the driver does not handle TSO correctly when skb's are over a certain size. Most cases have been fixed, this patch should ensure that forwarded SKB's that are greater than MAX_SINGLE_PACKET_SIZE - TX_OVERHEAD are software segmented and handled correctly. Signed-off-by:
James Hughes <james.hughes@raspberrypi.org> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Cong Wang authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 61678d28 ] syzbot reported an out-of-bound access in em_nbyte. As initially analyzed by Eric, this is because em_nbyte sets its own em->datalen in em_nbyte_change() other than the one specified by user, but this value gets overwritten later by its caller tcf_em_validate(). We should leave em->datalen untouched to respect their choices. I audit all the in-tree ematch users, all of those implement ->change() set em->datalen, so we can just avoid setting it twice in this case. Reported-and-tested-by: syzbot+5af9a90dad568aa9f611@syzkaller.appspotmail.com Reported-by: syzbot+2f07903a5b05e7f36410@syzkaller.appspotmail.com Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
-
William Dauchy authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit d0f41851 ] in the same manner as commit 690afc16 ("net: ip6_gre: fix moving ip6gre between namespaces"), fix namespace moving as it was broken since commit 2e15ea39 ("ip_gre: Add support to collect tunnel metadata."). Indeed, the ip6_gre commit removed the local flag for collect_md condition, so there is no reason to keep it for ip_gre/ip_tunnel. this patch will fix both ip_tunnel and ip_gre modules. Fixes: 2e15ea39 ("ip_gre: Add support to collect tunnel metadata.") Signed-off-by:
William Dauchy <w.dauchy@criteo.com> Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Michael Ellerman authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 3546d8f1 = The cxgb3 driver for "Chelsio T3-based gigabit and 10Gb Ethernet adapters" implements a custom ioctl as SIOCCHIOCTL/SIOCDEVPRIVATE in cxgb_extension_ioctl(). One of the subcommands of the ioctl is CHELSIO_GET_MEM, which appears to read memory directly out of the adapter and return it to userspace. It's not entirely clear what the contents of the adapter memory contains, but the assumption is that it shouldn't be accessible to all users. So add a CAP_NET_ADMIN check to the CHELSIO_GET_MEM case. Put it after the is_offload() check, which matches two of the other subcommands in the same function which also check for is_offload() and CAP_NET_ADMIN. Found by Ilja by code inspection, not tested as I don't have the required hardware. Reported-by:
Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Wenwen Wang authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit fa865ba1 ] In fs_open(), 'vcc' is allocated through kmalloc() and assigned to 'atm_vcc->dev_data.' In the following execution, if an error occurs, e.g., there is no more free channel, an error code EBUSY or ENOMEM will be returned. However, 'vcc' is not deallocated, leading to memory leaks. Note that, in normal cases where fs_open() returns 0, 'vcc' will be deallocated in fs_close(). But, if fs_open() fails, there is no guarantee that fs_close() will be invoked. To fix this issue, deallocate 'vcc' before the error code is returned. Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by:
-
Finn Thain authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 1efdd4bd ] Some platforms execute their timer handler with the interrupt priority level set below 6. That means the handler could be interrupted by another driver and this could lead to re-entry of the timer core. Avoid this by use of local_irq_save/restore for timer interrupt dispatch. This provides mutual exclusion around the timer interrupt flag access which is needed later in this series for the clocksource conversion. Reported-by:
Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1811131407120.2697@nanos.tec.linutronix.deSigned-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Andre Przywara authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 39a1a894 ] Older versions of the Juno *SoC* TRM [1] recommended that the UART clock source should be 7.2738 MHz, whereas the *system* TRM [2] stated a more correct value of 7.3728 MHz. Somehow the wrong value managed to end up in our DT. Doing a prime factorisation, a modulo divide by 115200 and trying to buy a 7.2738 MHz crystal at your favourite electronics dealer suggest that the old value was actually a typo. The actual UART clock is driven by a PLL, configured via a parameter in some board.txt file in the firmware, which reads 7.37 MHz (sic!). Fix this to correct the baud rate divisor calculation on the Juno board. [1] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0515b.b/DDI0515B_b_juno_arm_development_platform_soc_trm.pdf [2] http://infocenter.arm.com/help/topic/com.arm.doc.100113_0000_07_en/arm_versatile_express_juno_development_platform_(v2m_juno)_technical_reference_manual_100113_0000_07_en.pdf Fixes: 71f867ec ("arm64: Add Juno board device tree.") Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Acked-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
-
Sam Bobroff authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 62d91dd2 ] The INTERRUPT_CNTL2 register expects a valid DMA address, but is currently set with a GPU MC address. This can cause problems on systems that detect the resulting DMA read from an invalid address (found on a Power8 guest). Instead, use the DMA address of the dummy page because it will always be safe. Fixes: d8f60cfc ("drm/radeon/kms: Add support for interrupts on r6xx/r7xx chips (v3)") Fixes: 25a857fb ("drm/radeon/kms: add support for interrupts on SI") Fixes: a59781bb ("drm/radeon: add support for interrupts on CIK (v5)") Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Chuhong Yuan authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 340049d4 ] When devm_kcalloc fails, it forgets to call edma_free_slot. Replace direct return with failure handler to fix it. Fixes: 1be5336b ("dmaengine: edma: New device tree binding") Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191118073802.28424-1-hslester96@gmail.comSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit b756ad92 ] KCSAN reported the following data-race [1] Adding a couple of READ_ONCE()/WRITE_ONCE() should silence it. Since the report hinted about multiple cpus using the history concurrently, I added a test avoiding writing on it if the victim slot already contains the desired value. [1] BUG: KCSAN: data-race in fanout_demux_rollover / fanout_demux_rollover read to 0xffff8880b01786cc of 4 bytes by task 18921 on cpu 1: fanout_flow_is_huge net/packet/af_packet.c:1303 [inline] fanout_demux_rollover+0x33e/0x3f0 net/packet/af_packet.c:1353 packet_rcv_fanout+0x34e/0x490 net/packet/af_packet.c:1453 deliver_skb net/core/dev.c:1888 [inline] dev_queue_xmit_nit+0x15b/0x540 net/core/dev.c:1958 xmit_one net/core/dev.c:3195 [inline] dev_hard_start_xmit+0x3f5/0x430 net/core/dev.c:3215 __dev_queue_xmit+0x14ab/0x1b40 net/core/dev.c:3792 dev_queue_xmit+0x21/0x30 net/core/dev.c:3825 neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530 neigh_output include/net/neighbour.h:511 [inline] ip6_finish_output2+0x7a2/0xec0 net/ipv6/ip6_output.c:116 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline] __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175 dst_output include/net/dst.h:436 [inline] ip6_local_out+0x74/0x90 net/ipv6/output_core.c:179 ip6_send_skb+0x53/0x110 net/ipv6/ip6_output.c:1795 udp_v6_send_skb.isra.0+0x3ec/0xa70 net/ipv6/udp.c:1173 udpv6_sendmsg+0x1906/0x1c20 net/ipv6/udp.c:1471 inet6_sendmsg+0x6d/0x90 net/ipv6/af_inet6.c:576 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0x9f/0xc0 net/socket.c:657 ___sys_sendmsg+0x2b7/0x5d0 net/socket.c:2311 __sys_sendmmsg+0x123/0x350 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x64/0x80 net/socket.c:2439 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 write to 0xffff8880b01786cc of 4 bytes by task 18922 on cpu 0: fanout_flow_is_huge net/packet/af_packet.c:1306 [inline] fanout_demux_rollover+0x3a4/0x3f0 net/packet/af_packet.c:1353 packet_rcv_fanout+0x34e/0x490 net/packet/af_packet.c:1453 deliver_skb net/core/dev.c:1888 [inline] dev_queue_xmit_nit+0x15b/0x540 net/core/dev.c:1958 xmit_one net/core/dev.c:3195 [inline] dev_hard_start_xmit+0x3f5/0x430 net/core/dev.c:3215 __dev_queue_xmit+0x14ab/0x1b40 net/core/dev.c:3792 dev_queue_xmit+0x21/0x30 net/core/dev.c:3825 neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530 neigh_output include/net/neighbour.h:511 [inline] ip6_finish_output2+0x7a2/0xec0 net/ipv6/ip6_output.c:116 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline] __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175 dst_output include/net/dst.h:436 [inline] ip6_local_out+0x74/0x90 net/ipv6/output_core.c:179 ip6_send_skb+0x53/0x110 net/ipv6/ip6_output.c:1795 udp_v6_send_skb.isra.0+0x3ec/0xa70 net/ipv6/udp.c:1173 udpv6_sendmsg+0x1906/0x1c20 net/ipv6/udp.c:1471 inet6_sendmsg+0x6d/0x90 net/ipv6/af_inet6.c:576 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0x9f/0xc0 net/socket.c:657 ___sys_sendmsg+0x2b7/0x5d0 net/socket.c:2311 __sys_sendmmsg+0x123/0x350 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x64/0x80 net/socket.c:2439 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 18922 Comm: syz-executor.3 Not tainted 5.4.0-rc6+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 3b3a5b0a ("packet: rollover huge flows before small flows") Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 9d027e3a ] A difference of two unsigned long needs long storage. Fixes: c7fb64db ("[NETLINK]: Neighbour table configuration and statistics via rtnetlink") Signed-off-by:
-
Tiezhu Yang authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit dece3c2a ] When call function hwmon_device_register failed, use the actual return value instead of always -ENOMEM. Fixes: 64f09aa9 ("MIPS: Loongson-3: Add CPU Hwmon platform driver") Signed-off-by:
Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by:
Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Huacai Chen <chenhc@lemote.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Janusz Krzysztofik authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 39034bb0 ] Commit da298c6d ("[media] v4l2: replace video op g_mbus_fmt by pad op get_fmt") converted a former ov6650_g_fmt() video operation callback to an ov6650_get_fmt() pad operation callback. However, the converted function disregards a format->which flag that pad operations should obey and always returns active frame format settings. That can be fixed by always responding to V4L2_SUBDEV_FORMAT_TRY with -EINVAL, or providing the response from a pad config argument, likely updated by a former user call to V4L2_SUBDEV_FORMAT_TRY .set_fmt(). Since implementation of the latter is trivial, go for it. Fixes: da298c6d ("[media] v4l2: replace video op g_mbus_fmt by pad op get_fmt") Signed-off-by:
Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Janusz Krzysztofik authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 1c6a2b63 ] User arguments passed to .get/set_fmt() pad operation callbacks may contain unsupported values. The driver takes control over frame size and pixel code as well as colorspace and field attributes but has never cared for remainig format attributes, i.e., ycbcr_enc, quantization and xfer_func, introduced by commit 11ff030c ("[media] v4l2-mediabus: improve colorspace support"). Fix it. Set up a static v4l2_mbus_framefmt structure with attributes initialized to reasonable defaults and use it for updating content of user provided arguments. In case of V4L2_SUBDEV_FORMAT_ACTIVE, postpone frame size update, now performed from inside ov6650_s_fmt() helper, util the user argument is first updated in ov6650_set_fmt() with default frame format content. For V4L2_SUBDEV_FORMAT_TRY, don't copy all attributes to pad config, only those handled by the driver, then fill the response with the default frame format updated with resulting pad config format code and frame size. Fixes: 11ff030c ("[media] v4l2-mediabus: improve colorspace support") Signed-off-by:
-
Janusz Krzysztofik authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 12500731 ] Since its initial submission, the driver selects V4L2_COLORSPACE_JPEG for supported formats other than V4L2_MBUS_FMT_SBGGR8_1X8. According to v4l2-compliance test program, V4L2_COLORSPACE_JPEG applies exclusively to V4L2_PIX_FMT_JPEG. Since the sensor does not support JPEG format, fix it to always select V4L2_COLORSPACE_SRGB. Fixes: 2f6e2404 ("[media] SoC Camera: add driver for OV6650 sensor") Signed-off-by:
-
Stefan Wahren authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit bc19c329 ] The reset counter is specific for every QCA700x chip. So move this into the private driver struct. Otherwise we get unpredictable reset behavior in setups with multiple QCA700x chips. Fixes: 291ab06e (net: qualcomm: new Ethernet over SPI driver for QCA7000) Signed-off-by:
Stefan Wahren <stefan.wahren@in-tech.com> Signed-off-by:
Stefan Wahren <wahrenst@gmx.net> Signed-off-by:
-
Robin Gong authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit bd73dfab ] Illegal memory will be touch if SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 (41) exceed the size of structure sdma_script_start_addrs(40), thus cause memory corrupt such as slob block header so that kernel trap into while() loop forever in slob_free(). Please refer to below code piece in imx-sdma.c: for (i = 0; i < sdma->script_number; i++) if (addr_arr[i] > 0) saddr_arr[i] = addr_arr[i]; /* memory corrupt here */ That issue was brought by commit a572460b ("dmaengine: imx-sdma: Add support for version 3 firmware") because SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 (38->41 3 scripts added) not align with script number added in sdma_script_start_addrs(2 scripts). Fixes: a572460b ("dmaengine: imx-sdma: Add support for version 3 firmware") Cc: stable@vger.kernel Link: https://www.spinics.net/lists/arm-kernel/msg754895.htmlSigned-off-by:
Robin Gong <yibin.gong@nxp.com> Reported-by:
Jurgen Lambrecht <J.Lambrecht@TELEVIC.com> Link: https://lore.kernel.org/r/1569347584-3478-1-git-send-email-yibin.gong@nxp.com [vkoul: update the patch title] Signed-off-by:
-
Jeffrey Hugo authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 78e31c42 ] On msm8998, vblank timeouts are observed because the DSI controller is not reset properly, which ends up stalling the MDP. This is because the reset logic is not correct per the hardware documentation. The documentation states that after asserting reset, software should wait some time (no indication of how long), or poll the status register until it returns 0 before deasserting reset. wmb() is insufficient for this purpose since it just ensures ordering, not timing between writes. Since asserting and deasserting reset occurs on the same register, ordering is already guaranteed by the architecture, making the wmb extraneous. Since we would define a timeout for polling the status register to avoid a possible infinite loop, lets just use a static delay of 20 ms, since 16.666 ms is the time available to process one frame at 60 fps. Fixes: a689554b ("drm/msm: Initial add DSI connector support") Cc: Hai Li <hali@codeaurora.org> Cc: Rob Clark <robdclark@gmail.com> Signed-off-by:
Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by:
Sean Paul <sean@poorly.run> [seanpaul renamed RESET_DELAY to DSI_RESET_TOGGLE_DELAY_MS] Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191011133939.16551-1-jeffrey.l.hugo@gmail.comSigned-off-by:
-
Antonio Borneo authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 5da202c8 ] The field "name" in struct ptp_clock_info has a fixed size of 16 chars and is used as zero terminated string by clock_name_show() in drivers/ptp/ptp_sysfs.c The current initialization value requires 17 chars to fit also the null termination, and this causes overflow to the next bytes in the struct when the string is read as null terminated: hexdump -C /sys/class/ptp/ptp0/clock_name 00000000 73 74 6d 6d 61 63 5f 70 74 70 5f 63 6c 6f 63 6b |stmmac_ptp_clock| 00000010 a0 ac b9 03 0a |.....| where the extra 4 bytes (excluding the newline) after the string represent the integer 0x03b9aca0 = 62500000 assigned to the field "max_adj" that follows "name" in the same struct. There is no strict requirement for the "name" content and in the comment in ptp_clock_kernel.h it's reported it should just be 'A short "friendly name" to identify the clock'. Replace it with "stmmac ptp". Signed-off-by:
Antonio Borneo <antonio.borneo@st.com> Fixes: 92ba6888 ("stmmac: add the support for PTP hw clock driver") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 36453c85 ] If llc_conn_state_process() sees that llc_conn_service() put the skb on a list, it will drop one fewer references to it. This is wrong because the current behavior is that llc_conn_service() never consumes a reference to the skb. The code also makes the number of skb references being dropped conditional on which of ind_prim and cfm_prim are nonzero, yet neither of these affects how many references are *acquired*. So there is extra code that tries to fix this up by sometimes taking another reference. Remove the unnecessary/broken refcounting logic and instead just add an skb_get() before the only two places where an extra reference is actually consumed. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit fc8d5db1 ] All callers of llc_conn_state_process() except llc_build_and_send_pkt() (via llc_ui_sendmsg() -> llc_ui_send_data()) assume that it always consumes a reference to the skb. Fix this caller to do the same. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Johannes Berg authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 95697f99 ] We can process deauth frames and all, but we drop them very early in the RX path today - this could never have worked. Fixes: 2cc59e78 ("mac80211: reply to AUTH with DEAUTH if sta allocation fails in IBSS") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20191004123706.15768-2-luca@coelho.fiSigned-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 23104218 ] The "gmac->phy_mode" variable is an enum and in this context GCC will treat it as an unsigned int so the error handling will never be triggered. Fixes: b1c17215 ("stmmac: add ipq806x glue layer") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 25a58495 ] The "priv->phy_interface" variable is an enum and in this context GCC will treat it as unsigned so the error handling will never be triggered. Fixes: 80105bef ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 002dfe80 ] The "priv->phy_mode" variable is an enum and in this context GCC will treat it as unsigned to the error handling will never trigger. Fixes: 57c5bc9a ("net: hisilicon: add hix5hd2 mac driver") Signed-off-by:
-
Filippo Sironi authored
BugLink: https://bugs.launchpad.net/bugs/1864773 [ Upstream commit 0b15e02f ] To make sure the domain tlb flush completes before the function returns, explicitly wait for its completion. Signed-off-by:
Filippo Sironi <sironi@amazon.de> Fixes: 42a49f96 ("amd-iommu: flush domain tlb when attaching a new device") [joro: Added commit message and fixes tag] Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
