- 15 Mar, 2022 29 commits
-
-
Jacob Keller authored
The ice_reset_vf function returns a boolean value indicating whether or not the VF reset. This is a bit confusing since it means that callers need to know how to interpret the return value when needing to indicate an error. Refactor the function and call sites to report a regular error code. We still report success (i.e. return 0) in cases where the reset is in progress or is disabled. Existing callers don't care because they do not check the return value. We keep the error code anyways instead of a void return because we expect future code which may care about or at least report the error value. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Jacob Keller authored
The ice_reset_all_vfs function returns true if any VFs were reset, and false otherwise. However, no callers check the return value. Drop this return value and make the function void since the callers do not care about this. Signed-off-by:
-
Jacob Keller authored
The ice_reset_all_vfs function takes a parameter to handle whether its operating after a VFLR event or not. This is not necessary as every caller always passes true. Simplify the interface by removing the parameter. Signed-off-by:
-
Jacob Keller authored
Now that the reset functions do not rely on Single Root specific behavior, move the ice_reset_vf, ice_reset_all_vfs, and ice_vf_rebuild_host_cfg functions and their dependent helper functions out of ice_sriov.c and into ice_vf_lib.c Signed-off-by:
-
Jacob Keller authored
We're about to move ice_reset_vf out of ice_sriov.c and into ice_vf_lib.c One of the dev_err statements has a checkpatch.pl violation due to putting the vf->vf_id on the same line as the dev_err. Fix this style issue first before moving the code. Signed-off-by:
-
Jacob Keller authored
The ice driver currently supports virtualization using Single Root IOV, with code in the ice_sriov.c file. In the future, we plan to also implement support for Scalable IOV, which uses slightly different hardware implementations for some functionality. To eventually allow this, we introduce a new ice_vf_ops structure which will contain the basic operations that are different between the two IOV implementations. This primarily includes logic for how to handle the VF reset registers, as well as what to do before and after rebuilding the VF's VSI. Implement these ops structures and call the ops table instead of directly calling the SR-IOV specific function. This will allow us to easily add the Scalable IOV implementation in the future. Additionally, it helps separate the generalized VF logic from SR-IOV specifics. This change allows us to move the reset logic out of ice_sriov.c and into ice_vf_lib.c without placing any Single Root specific details into the generic file. Signed-off-by:
-
Jacob Keller authored
If we fail to clear the malicious VF indication after a VF reset, the dev_dbg message which is printed uses the local variable 'i' when it meant to use vf->vf_id. Fix this. Fixes: 0891c896 ("ice: warn about potentially malicious VFs") Signed-off-by:
-
Jacob Keller authored
Introduce the ice_vf_lib.c file along with the ice_vf_lib.h and ice_vf_lib_private.h header files. These files will house the generic VF structures and access functions. Move struct ice_vf and its dependent definitions into this new header file. The ice_vf_lib.c is compiled conditionally on CONFIG_PCI_IOV. Some of its functionality is required by all driver files. However, some of its functionality will only be required by other files also conditionally compiled based on CONFIG_PCI_IOV. Declaring these functions used only in CONFIG_PCI_IOV files in ice_vf_lib.h is verbose. This is because we must provide a fallback implementation for each function in this header since it is included in files which may not be compiled with CONFIG_PCI_IOV. Instead, introduce a new ice_vf_lib_private.h header which verifies that CONFIG_PCI_IOV is enabled. This header is intended to be directly included in .c files which are CONFIG_PCI_IOV only. Add a #error indication that will complain if the file ever gets included by another C file on a kernel with CONFIG_PCI_IOV disabled. Add a comment indicating the nature of the file and why it is useful. This makes it so that we can easily define functions exposed from ice_vf_lib.c into other virtualization files without needing to add fallback implementations for every single function. This begins the path to separate out generic code which will be reused by other virtualization implementations from ice_sriov.h and ice_sriov.c Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2022-03-14 Jacob Keller says: The ice_virtchnl_pf.c file has become a single place for a lot of virtualization functionality. This includes most of the virtchnl message handling, integration with kernel hooks like the .ndo operations, reset logic, and more. We are planning in the future to implement and support Scalable IOV in the ice driver. To do this, much (but not all) of the code in ice_virtchnl_pf.c will want to be reused. Rather than dump all of the Scalable IOV implementation into ice_virtchnl_pf.c it makes sense to house it in a separate file. But that still leaves all of the Single Root IOV code littered among more generic logic. The long term goal is to re-organize the code such that generic re-usable code is split into separate files. The ice_sriov.c file would end up containing all of the Single Root IOV implementation specific details, while ice_vf_lib.[ch] and ice_virtchnl.[ch] contain the generic pieces. As a first step, notice that ice_sriov.c currently does not contain much of the SR-IOV implementation. This is housed primarily in ice_virtchnl_pf.c The code in ice_sriov.c is really generic and relates to the VF mailbox, including mailbox overflow detection. Rename ice_sriov.c to ice_vf_mbx.c, and then rename ice_virtchnl_pf.c to ice_sriov.c A later series will finish the refactor by splitting ice_sriov.c into multiple files, moving the generic code into ice_vf_lib.c and ice_virtchnl.c To prepare for that series, perform some basic cleanup and other refactors that we've accumulated during this development cycle. This series builds on top of the recent hash table refactor work. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: use ice_is_vf_trusted helper function ice: log an error message when eswitch fails to configure ice: cleanup error logging for ice_ena_vfs ice: move ice_set_vf_port_vlan near other .ndo ops ice: refactor spoofchk control code in ice_sriov.c ice: rename ICE_MAX_VF_COUNT to avoid confusion ice: remove unused definitions from ice_sriov.h ice: convert vf->vc_ops to a const pointer ice: remove circular header dependencies on ice.h ice: rename ice_virtchnl_pf.c to ice_sriov.c ice: rename ice_sriov.c to ice_vf_mbx.c ==================== Link: https://lore.kernel.org/r/20220315011155.2166817-1-anthony.l.nguyen@intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next 1) Revert CHECKSUM_UNNECESSARY for UDP packet from conntrack. 2) Reject unsupported families when creating tables, from Phil Sutter. 3) GRE support for the flowtable, from Toshiaki Makita. 4) Add GRE offload support for act_ct, also from Toshiaki. 5) Update mlx5 driver to support for GRE flowtable offload, from Toshiaki Makita. 6) Oneliner to clean up incorrect indentation in nf_conntrack_bridge, from Jiapeng Chong. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: bridge: clean up some inconsistent indenting net/mlx5: Support GRE conntrack offload act_ct: Support GRE offload netfilter: flowtable: Support GRE netfilter: nf_tables: Reject tables of unsupported family Revert "netfilter: conntrack: mark UDP zero checksum as CHECKSUM_UNNECESSARY" ==================== Link: https://lore.kernel.org/r/20220315091513.66544-1-pablo@netfilter.orgSigned-off-by:
-
Vladimir Oltean authored
IEEE_8021QAZ_MAX_TCS is defined in include/uapi/linux/dcbnl.h, which is included by net/dcbnl.h. Then, linux/netdevice.h conditionally includes net/dcbnl.h if CONFIG_DCB is enabled. Therefore, when CONFIG_DCB is disabled, this indirect dependency is broken. There isn't a good reason to include net/dcbnl.h headers into the ocelot switch library which exports low-level hardware API, so replace IEEE_8021QAZ_MAX_TCS with OCELOT_NUM_TC which has the same value. Fixes: 978777d0 ("net: dsa: felix: configure default-prio and dscp priorities") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220315131215.273450-1-vladimir.oltean@nxp.comSigned-off-by:
-
Dan Carpenter authored
The WARN_ON() macro takes a condition, not a warning message. Fixes: 0933bd04 ("net: sparx5: Add support for ptp clocks") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220314140327.GB30883@kiliSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Petr Machata says: ==================== netdevsim: Support for L3 HW stats "L3 stats" is a suite of interface statistics aimed at reflecting traffic taking place in a HW device, on an object corresponding to some software netdevice. Support for this stats suite has been added recently, in commit ca0a53dc ("Merge branch 'net-hw-counters-for-soft-devices'"). In this patch set: - Patch #1 adds support for L3 stats to netdevsim. Real devices can have various conditions for when an L3 counter is available. To simulate this, netdevsim maintains a list of devices suitable for HW stats collection. Only when l3_stats is enabled on both a netdevice itself, and in netdevsim, will netdevsim contribute values to L3 stats. This enablement and disablement is done via debugfs: # echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/enable_ifindex # echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/disable_ifindex Besides this, there is a third toggle to mark a device for future failure: # echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/fail_next_enable - This allows HW-independent testing of stats reporting and in-kernel APIs, as well as a test for enablement rollback, which is difficult to do otherwise. This netdevsim-specific selftest is added in patch #2. - Patch #3 adds another driver-specific selftest, namely a test aimed at checking mlxsw-induced stats monitoring events. ==================== Link: https://lore.kernel.org/r/cover.1647265833.git.petrm@nvidia.comSigned-off-by:
-
Petr Machata authored
Add a test that verifies that UAPI notifications are emitted, as mlxsw installs and deinstalls HW counters for the L3 offload xstats. Signed-off-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
Petr Machata authored
Add a test that verifies basic UAPI contracts, netdevsim operation, rollbacks after partial enablement in core, and UAPI notifications. Signed-off-by:
-
Petr Machata authored
Add support for testing of HW stats support that was added recently, namely the L3 stats support. L3 stats are provided for devices for which the L3 stats have been turned on, and that were enabled for netdevsim through a debugfs toggle: # echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/enable_ifindex For fully enabled netdevices, netdevsim counts 10pps of ingress traffic and 20pps of egress traffic. Similarly, L3 stats can be disabled for a given device, and netdevsim ceases pretending there is any HW traffic going on: # echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/disable_ifindex Besides this, there is a third toggle to mark a device for future failure: # echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/fail_next_enable A future request to enable L3 stats on such netdevice will be bounced by netdevsim: # ip -j l sh dev d | jq '.[].ifindex' 66 # echo 66 > /sys/kernel/debug/netdevsim/netdevsim10/hwstats/l3/enable_ifindex # echo 66 > /sys/kernel/debug/netdevsim/netdevsim10/hwstats/l3/fail_next_enable # ip stats set dev d l3_stats on Error: netdevsim: Stats enablement set to fail. Signed-off-by:Ido Schimmel <idosch@nvidia.com> Acked-by:
-
Anders Roxell authored
When building driver CONFIG_MICREL_PHY the follow error shows up: aarch64-linux-gnu-ld: drivers/net/phy/micrel.o: in function `lan8814_ts_info': micrel.c:(.text+0x1764): undefined reference to `ptp_clock_index' micrel.c:(.text+0x1764): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_index' aarch64-linux-gnu-ld: drivers/net/phy/micrel.o: in function `lan8814_probe': micrel.c:(.text+0x4720): undefined reference to `ptp_clock_register' micrel.c:(.text+0x4720): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_register' Rework Kconfig for MICREL_PHY to depend on 'PTP_1588_CLOCK_OPTIONAL'. Arnd describes in a good way why its needed to add this depends in patch e5f31552 ("ethernet: fix PTP_1588_CLOCK dependencies"). Reported-by:
kernel test robot <lkp@intel.com> Fixes: ece19502 ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220314110254.12498-1-anders.roxell@linaro.orgSigned-off-by:
-
Michael Walle authored
The Lantech 8330-262D-E module is 2500base-X capable, but it reports the nominal bitrate as 2500MBd instead of 3125MBd. Add a quirk for the module. The following in an EEPROM dump of such a SFP with the serial number redacted: 00: 03 04 07 00 00 00 01 20 40 0c 05 01 19 00 00 00 ???...? @????... 10: 1e 0f 00 00 4c 61 6e 74 65 63 68 20 20 20 20 20 ??..Lantech 20: 20 20 20 20 00 00 00 00 38 33 33 30 2d 32 36 32 ....8330-262 30: 44 2d 45 20 20 20 20 20 56 31 2e 30 03 52 00 cb D-E V1.0?R.? 40: 00 1a 00 00 46 43 XX XX XX XX XX XX XX XX XX XX .?..FCXXXXXXXXXX 50: 20 20 20 20 32 32 30 32 31 34 20 20 68 b0 01 98 220214 h??? 60: 45 58 54 52 45 4d 45 4c 59 20 43 4f 4d 50 41 54 EXTREMELY COMPAT 70: 49 42 4c 45 20 20 20 20 20 20 20 20 20 20 20 20 IBLE Signed-off-by:
Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220312205014.4154907-1-michael@walle.ccSigned-off-by:
-
Jacob Keller authored
The ice_vc_cfg_promiscuous_mode_msg function directly checks ICE_VIRTCHNL_VF_CAP_PRIVILEGE, instead of using the existing helper function ice_is_vf_trusted. Switch this to use the helper function so that all trusted checks are consistent. This aids in any potential future refactor by ensuring consistent code. Signed-off-by:
-
Jacob Keller authored
When ice_eswitch_configure fails, print an error message to make it more obvious why VF initialization did not succeed. Signed-off-by:
Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by:
-
Jacob Keller authored
The ice_ena_vfs function and some of its sub-functions like ice_set_per_vf_res use a "if (<function>) { <print error> ; <exit> }" flow. This flow discards specialized errors reported by the called function. This style is generally not preferred as it makes tracing error sources more difficult. It also means we cannot log the actual error received properly. Refactor several calls in the ice_ena_vfs function that do this to catch the error in the 'ret' variable. Report this in the messages, and then return the more precise error value. Doing this reveals that ice_set_per_vf_res returns -EINVAL or -EIO in places where -ENOSPC makes more sense. Fix these calls up to return the more appropriate value. Signed-off-by: -
Jacob Keller authored
The ice_set_vf_port_vlan function is located in ice_sriov.c very far away from the other .ndo operations that it is similar to. Move this so that its located near the other .ndo operation definitions. Signed-off-by:
-
Jacob Keller authored
The API to control the VSI spoof checking for a VF VSI has three functions: enable, disable, and set. The set function takes the VSI and the VF and decides whether to call enable or disable based on the vf->spoofchk field. In some flows, vf->spoofchk is not yet set, such as the function used to control the setting for a VF. (vf->spoofchk is only updated after a success). Simplify this API by refactoring ice_vf_set_spoofchk_cfg to be "ice_vsi_apply_spoofchk" which takes the boolean and allows all callers to avoid having to determine whether to call enable or disable themselves. This matches the expected callers better, and will prevent the need to export more than one function when this code must be called from another file. Signed-off-by:
-
Jacob Keller authored
The ICE_MAX_VF_COUNT field is defined in ice_sriov.h. This count is true for SR-IOV but will not be true for all VF implementations, such as when the ice driver supports Scalable IOV. Rename this definition to clearly indicate ICE_MAX_SRIOV_VFS. Signed-off-by:
-
Jacob Keller authored
A few more macros exist in ice_sriov.h which are not used anywhere. These can be safely removed. Note that ICE_VIRTCHNL_VF_CAP_L2 capability is set but never checked anywhere in the driver. Thus it is also safe to remove. Signed-off-by:
-
Jacob Keller authored
The vc_ops structure is used to allow different handlers for virtchnl commands when the driver is in representor mode. The current implementation uses a copy of the ops table in each VF, and modifies this copy dynamically. The usual practice in kernel code is to store the ops table in a constant structure and point to different versions. This has a number of advantages: 1. Reduced memory usage. Each VF merely points to the correct table, so they're able to re-use the same constant lookup table in memory. 2. Consistency. It becomes more difficult to accidentally update or edit only one op call. Instead, the code switches to the correct able by a single pointer write. In general this is atomic, either the pointer is updated or its not. 3. Code Layout. The VF structure can store a pointer to the table without needing to have the full structure definition defined prior to the VF structure definition. This will aid in future refactoring of code by allowing the VF pointer to be kept in ice_vf_lib.h while the virtchnl ops table can be maintained in ice_virtchnl.h There is one major downside in the case of the vc_ops structure. Most of the operations in the table are the same between the two current implementations. This can appear to lead to duplication since each implementation must now fill in the complete table. It could make spotting the differences in the representor mode more challenging. Unfortunately, methods to make this less error prone either add complexity overhead (macros using CPP token concatenation) or don't work on all compilers we support (constant initializer from another constant structure). The cost of maintaining two structures does not out weigh the benefits of the constant table model. While we're making these changes, go ahead and rename the structure and implementations with "virtchnl" instead of "vc_vf_". This will more closely align with the planned file renaming, and avoid similar names when we later introduce a "vf ops" table for separating Scalable IOV and Single Root IOV implementations. Leave the accessor/assignment functions in order to avoid issues with compiling with options disabled. The interface makes it easier to handle when CONFIG_PCI_IOV is disabled in the kernel. Signed-off-by: -
Jacob Keller authored
Several headers in the ice driver include ice.h even though they are themselves included by that header. The most notable of these is ice_common.h, but several other headers also do this. Such a recursive inclusion is problematic as it forces headers to be included in a strict order, otherwise compilation errors can result. The circular inclusions do not trigger an endless loop due to standard header inclusion guards, however other errors can occur. For example, ice_flow.h defines ice_rss_hash_cfg, which is used by ice_sriov.h as part of the definition of ice_vf_hash_ip_ctx. ice_flow.h includes ice_acl.h, which includes ice_common.h, and which finally includes ice.h. Since ice.h itself includes ice_sriov.h, this creates a circular dependency. The definition in ice_sriov.h requires things from ice_flow.h, but ice_flow.h itself will lead to trying to load ice_sriov.h as part of its process for expanding ice.h. The current code avoids this issue by having an implicit dependency without the include of ice_flow.h. If we were to fix that so that ice_sriov.h explicitly depends on ice_flow.h the following pattern would occur: ice_flow.h -> ice_acl.h -> ice_common.h -> ice.h -> ice_sriov.h At this point, during the expansion of, the header guard for ice_flow.h is already set, so when ice_sriov.h attempts to load the ice_flow.h header it is skipped. Then, we go on to begin including the rest of ice_sriov.h, including structure definitions which depend on ice_rss_hash_cfg. This produces a compiler warning because ice_rss_hash_cfg hasn't yet been included. Remember, we're just at the start of ice_flow.h! If the order of headers is incorrect (ice_flow.h is not implicitly loaded first in all files which include ice_sriov.h) then we get the same failure. Removing this recursive inclusion requires fixing a few cases where some headers depended on the header inclusions from ice.h. In addition, a few other changes are also required. Most notably, ice_hw_to_dev is implemented as a macro in ice_osdep.h, which is the likely reason that ice_common.h includes ice.h at all. This macro implementation requires the full definition of ice_pf in order to properly compile. Fix this by moving it to a function declared in ice_main.c, so that we do not require all files to depend on the layout of the ice_pf structure. Note that this change only fixes circular dependencies, but it does not fully resolve all implicit dependencies where one header may depend on the inclusion of another. I tried to fix as many of the implicit dependencies as I noticed, but fixing them all requires a somewhat tedious analysis of each header and attempting to compile it separately. Signed-off-by:
-
Jacob Keller authored
The ice_virtchnl_pf.c and ice_virtchnl_pf.h files are where most of the code for implementing Single Root IOV virtualization resides. This code includes support for bringing up and tearing down VFs, hooks into the kernel SR-IOV netdev operations, and for handling virtchnl messages from VFs. In the future, we plan to support Scalable IOV in addition to Single Root IOV as an alternative virtualization scheme. This implementation will re-use some but not all of the code in ice_virtchnl_pf.c To prepare for this future, we want to refactor and split up the code in ice_virtchnl_pf.c into the following scheme: * ice_vf_lib.[ch] Basic VF structures and accessors. This is where scheme-independent code will reside. * ice_virtchnl.[ch] Virtchnl message handling. This is where the bulk of the logic for processing messages from VFs using the virtchnl messaging scheme will reside. This is separated from ice_vf_lib.c because it is distinct and has a bulk of the processing code. * ice_sriov.[ch] Single Root IOV implementation, including initialization and the routines for interacting with SR-IOV based netdev operations. * (future) ice_siov.[ch] Scalable IOV implementation. As a first step, lets assume that all of the code in ice_virtchnl_pf.[ch] is for Single Root IOV. Rename this file to ice_sriov.c and its header to ice_sriov.h Future changes will further split out the code in these files following the plan outlined here. Signed-off-by:
-
Jacob Keller authored
The ice_sriov.c file primarily contains code which handles the logic for mailbox overflow detection and some other utility functions related to the virtualization mailbox. The bulk of the SR-IOV implementation is actually found in ice_virtchnl_pf.c, and this file isn't strictly SR-IOV specific. In the future, the ice driver will support an additional virtualization scheme known as Scalable IOV, and the code in this file will be used for this alternative implementation. Rename this file (and its associated header) to ice_vf_mbx.c, so that we can later re-use the ice_sriov.c file as the SR-IOV specific file. Signed-off-by:
-
- 14 Mar, 2022 11 commits
-
-
Niklas Söderlund authored
Fix the following coccicheck warning: drivers/net/ethernet/netronome/nfp/flower/action.c:959:7-69: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD Signed-off-by:Niklas Söderlund <niklas.soderlund@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220312095823.2425775-1-niklas.soderlund@corigine.comSigned-off-by:
-
Saeed Mahameed authored
We need to sync page pool stats only for active channels. Reading ethtool stats on a down netdev or a netdev with modified number of channels will result in a user-after-free, trying to access page pools that are freed already. BUG: KASAN: use-after-free in mlx5e_stats_grp_sw_update_stats+0x465/0xf80 Read of size 8 at addr ffff888004835e40 by task ethtool/720 Fixes: cc10e84b ("mlx5: add support for page_pool_get_stats") Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Reported-by:
Joe Damato <jdamato@fastly.com> Link: https://lore.kernel.org/r/20220312005353.786255-1-saeed@kernel.orgSigned-off-by:
-
Julia Lawall authored
Use kzalloc instead of kmalloc + memset. The semantic patch that makes this change is: (https://coccinelle.gitlabpages.inria.fr/website/) //<smpl> @@ expression res, size, flag; @@ - res = kmalloc(size, flag); + res = kzalloc(size, flag); ... - memset(res, 0, size); //</smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20220312102705.71413-3-Julia.Lawall@inria.frSigned-off-by:
-
Eric Dumazet authored
syzbot was kind enough to remind us that dev->{tx_dropped|rx_dropped} could be increased in process context. BUG: using smp_processor_id() in preemptible [00000000] code: syz-executor413/3593 caller is netdev_core_stats_alloc+0x98/0x110 net/core/dev.c:10298 CPU: 1 PID: 3593 Comm: syz-executor413 Not tainted 5.17.0-rc7-syzkaller-02426-g97aeb877 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 check_preemption_disabled+0x16b/0x170 lib/smp_processor_id.c:49 netdev_core_stats_alloc+0x98/0x110 net/core/dev.c:10298 dev_core_stats include/linux/netdevice.h:3855 [inline] dev_core_stats_rx_dropped_inc include/linux/netdevice.h:3866 [inline] tun_get_user+0x3455/0x3ab0 drivers/net/tun.c:1800 tun_chr_write_iter+0xe1/0x200 drivers/net/tun.c:2015 call_write_iter include/linux/fs.h:2074 [inline] new_sync_write+0x431/0x660 fs/read_write.c:503 vfs_write+0x7cd/0xae0 fs/read_write.c:590 ksys_write+0x12d/0x250 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f2cf4f887e3 Code: 5d 41 5c 41 5d 41 5e e9 9b fd ff ff 66 2e 0f 1f 84 00 00 00 00 00 90 64 8b 04 25 18 00 00 00 85 c0 75 14 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 55 c3 0f 1f 40 00 48 83 ec 28 48 89 54 24 18 RSP: 002b:00007ffd50dd5fd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007ffd50dd6000 RCX: 00007f2cf4f887e3 RDX: 000000000000002a RSI: 0000000000000000 RDI: 00000000000000c8 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffd50dd5ff0 R14: 00007ffd50dd5fe8 R15: 00007ffd50dd5fe4 </TASK> Fixes: 625788b5 ("net: add per-cpu storage and net->core_stats") Signed-off-by:Eric Dumazet <edumazet@google.com> Cc: jeffreyji <jeffreyji@google.com> Cc: Brian Vazquez <brianvv@google.com> Acked-by:
-
Julia Lawall authored
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by:
-
David S. Miller authored
Ioana Ciornei says: ==================== dpaa2-mac: add support for changing the protocol at runtime This patch set adds support for changing the Ethernet protocol at runtime on Layerscape SoCs which have the Lynx 28G SerDes block. The first two patches add a new generic PHY driver for the Lynx 28G and the bindings file associated. The driver reads the PLL configuration at probe time (the frequency provided to the lanes) and determines what protocols can be supported. Based on this the driver can deny or approve a request from the dpaa2-mac to setup a new protocol. The next 2 patches add some MC APIs for inquiring what is the running version of firmware and setting up a new protocol on the MAC. Moving along, we extract the code for setting up the supported interfaces on a MAC on a different function since in the next patches will update the logic. In the next patch, the dpaa2-mac is updated so that it retrieves the SerDes PHY based on the OF node and in case of a major reconfig, call the PHY driver to set up the new protocol on the associated lane and the MC firmware to reconfigure the MAC side of things. Finally, the LX2160A dtsi is annotated with the SerDes PHY nodes for the 1st SerDes block. Beside this, the LX2160A Clearfog dtsi is annotated with the 'phys' property for the exposed SFP cages. Changes in v2: - 1/8: add MODULE_LICENSE Changes in v3: - 2/8: fix 'make dt_binding_check' errors - 7/8: reverse order of dpaa2_mac_start() and phylink_start() - 7/8: treat all RGMII variants in dpmac_eth_if_mode - 7/8: remove the .mac_prepare callback - 7/8: ignore PHY_INTERFACE_MODE_NA in validate Changes in v4: - 1/8: remove the DT nodes parsing - 1/8: add an xlate function - 2/8: remove the children phy nodes for each lane - 7/8: rework the of_phy_get if statement - 8/8: remove the DT nodes for each lane and the lane id in the phys phandle Changes in v5: - 2/8: use phy as the name of the DT node in the example ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Ioana Ciornei authored
Describe the SerDes block #1 using the generic phys infrastructure. This way, the ethernet nodes can each reference their serdes lanes individually using the 'phys' dts property. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Ioana Ciornei authored
This patch integrates the dpaa2-eth driver with the generic PHY infrastructure in order to search, find and reconfigure the SerDes lanes in case of a protocol change. On the .mac_config() callback, the phy_set_mode_ext() API is called so that the Lynx 28G SerDes PHY driver can change the lane's configuration. In the same phylink callback the MC firmware is called so that it reconfigures the MAC side to run using the new protocol. The consumer drivers - dpaa2-eth and dpaa2-switch - are updated to call the dpaa2_mac_start/stop functions newly added which will power_on/power_off the associated SerDes lane. Signed-off-by:
-
Ioana Ciornei authored
The logic to setup the supported interfaces will get annotated based on what the configuration of the SerDes PLLs supports. Move the current setup into a separate function just to try to keep it clean. Signed-off-by:
-
Ioana Ciornei authored
Retrieve the API version running on the firmware and based on it detect which features are available for usage. The first one to be listed is the capability to change the MAC protocol at runtime. Signed-off-by:
-
Ioana Ciornei authored
The MC firmware gained recently a new command which can reconfigure the running protocol on the underlying MAC. Add this new command which will be used in the next patches in order to do a major reconfig on the interface. Signed-off-by:
-
