- 03 Mar, 2020 19 commits
-
-
José Roberto de Souza authored
Following the changes in the previous patch "drm/i915/gen11: Moving WAs to rcs_engine_wa_init()" also moving TGL Wa_1408615072 to rcs_engine_wa_init() this way after a engine reset it will be reapplied also restricting it to A0 as it is fixed in B0 stepping. BSpec: 52890 Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200302231421.224322-2-jose.souza@intel.com
-
José Roberto de Souza authored
This are register of render engine, so after a render reset those would return to the default value and init_clock_gating() is not called for single engine reset. So here moving it rcs_engine_wa_init() that will guarantee that this WAs will not be lost. Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Aditya Swarup authored
Static code analysis tool identified struct lrc_timestamp data as being uninitialized and then data.ce[] is being checked for NULL/negative value in the error path. Initializing data variable fixes the issue. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Aditya Swarup <aditya.swarup@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Chris Wilson authored
As we have pinned the timeline (using tl->active_count), we can safely drop the tl->mutex as we wait for what we believe to be the final request on that timeline. This is useful for ensuring that we do not block the engine heartbeat by hogging the kernel_context's timeline on a dead GPU. References: https://gitlab.freedesktop.org/drm/intel/issues/1364 Fixes: 058179e7 ("drm/i915/gt: Replace hangcheck by heartbeats") Fixes: f33a8a51 ("drm/i915: Merge wait_for_timelines with retire_request") Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200303140009.1494819-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
The is-closed flag may be added after we have acquired the vma under the ctx->mutex, but will not take effect until after we release the vm->mutex. i.e. the flag may be set on the vma as attempt to bind it and that will cause the vma to be unbound later after we unpin it. Signed-off-by:
-
Chris Wilson authored
As setup takes a long time, the user may close the context during the construction of the execbuf. In order to make sure we correctly track all outstanding work with non-persistent contexts, we need to serialise the submission with the context closure and mop up any leaks. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200303080546.1140508-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
If a context is banned even before we submit our first request to it, report the failure before we attempt to allocate any resources for the context. Signed-off-by:
-
Chris Wilson authored
Use the same engine_idle_release() routine for cleaning all old ctx->engine[] state, closing any potential races with concurrent execbuf submission. v2ish: Use the ce->pin_count to close the execbuf gap. Closes: https://gitlab.freedesktop.org/drm/intel/issues/1241Signed-off-by:
-
Ville Syrjälä authored
It irks me to use crtc_state_is_legacy_gamma() inside the guts of the CHV color management code. Let's get rid of it and instead just consult cgm_mode to figure out if we want to enable the pipe gamma or the CGM gamma. Also CHV display engine is based on i965/g4x so we should fall back to the i965 path when the CGM gamma is not used. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191107151725.10507-3-ville.syrjala@linux.intel.comReviewed-by:
Swati Sharma <swati2.sharma@intel.com>
-
Jani Nikula authored
i915_drv.c is the only caller. Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200227144408.24345-3-jani.nikula@intel.com
-
Jani Nikula authored
Nobody else uses it. Signed-off-by:
-
Jani Nikula authored
Add intel_vgpu_register() abstraction, rename i915_detect_vgpu() to intel_vgpu_detect() to match other function naming, un-inline intel_vgpu_active(), intel_vgpu_has_full_ppgtt() and intel_vgpu_has_huge_gtt() to reduce header interdependencies. The i915_vgpu.[ch] filename and intel_vgpu_ prefix discrepancy remains. Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Anshuman Gupta authored
has_transcoder() was unused because function which was using it, intel_display_capture_error_state() defined under CONFIG_DRM_I915_CAPTURE_ERROR. Moving has_transcoder() to under CONFIG_DRM_I915_CAPTURE_ERROR. No functional change. Fixes: d54c1a51 ("drm/i915: Fix broken transcoder err state") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-by:
kbuild test robot <lkp@intel.com> Reviewed-by:
Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by:
Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200227175147.11362-1-anshuman.gupta@intel.com
-
Ramalingam C authored
Converts remaining instances of the printk based logging macros in i915/display/intel_hdcp.c with the struct drm_device based macros manually. This is continuation of commit 65833c46 ("drm/i915/hdcp: conversion to struct drm_device based logging macros.") v2: i915_dev_priv is used instead of drm_device for reusability [JaniN] v3: Made it independent from the series. once instance of dev_priv naming is changed to i915 [Jani N] Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200212123007.6659-1-ramalingam.c@intel.com
-
Jani Nikula authored
Shrink i915_drv.h a bit by moving watermark structs where they are needed. Reviewed-by:
-
Chris Wilson authored
Update locations for ./drivers/gpu/drm/i915/i915_vma.h:1: warning: 'Virtual Memory Address' not found ./drivers/gpu/drm/i915/i915_gem_gtt.c:1: warning: 'Global GTT views' not found Signed-off-by:
-
José Roberto de Souza authored
New firmware contains minor fixes around context restore. Reviewed-by:
-
Jani Nikula authored
intel_csr.c was moved under display. Fixes: 06d3ff6e ("drm/i915: move intel_csr.[ch] under display/") Reported-by:
-
Daniele Ceraolo Spurio authored
Update to the latest available TGL HuC, which includes changes required by the media team. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Tony Ye <tony.ye@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
Tony Ye <tony.ye@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200229012042.27487-1-daniele.ceraolospurio@intel.com
-
- 02 Mar, 2020 21 commits
-
-
Chris Wilson authored
We only use sentinel requests for "preempt-to-idle" passes, so assert that they are the only request in a new submission. Signed-off-by:
-
Chris Wilson authored
We still need to wait for the initial OA configuration to happen before we enable OA report writes to the OA buffer. Reported-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 15d0ace1 ("drm/i915/perf: execute OA configuration from command stream") Closes: https://gitlab.freedesktop.org/drm/intel/issues/1356 Testcase: igt/perf/stream-open-close Signed-off-by:
-
José Roberto de Souza authored
Just to make easier to check that the Wa was implemetend when comparing to the number in BSpec. BSpec: 52890 Signed-off-by:
-
José Roberto de Souza authored
Different issues with the same fix, so justing adding Wa_1409142259, Wa_1409252684, Wa_1409217633, Wa_1409207793, Wa_1409178076 and 1408979724 to the comment so other devs can check if this Was were implemetend with a simple grep. Signed-off-by:
-
José Roberto de Souza authored
The Wa number for this fix is Wa_1607087056 the BSpec bug id is 1607087056, just updating to match BSpec. BSpec: 52890 Signed-off-by:
-
José Roberto de Souza authored
This issue workaround in Wa_1607063988 has the same fix as Wa_1607138336, so just adding a note in the code. Reviewed-by:
-
José Roberto de Souza authored
Add note about the confliting information in BSpec about this WA. BSpec: 52890 Acked-by:
-
Anusha Srivatsa authored
According to BSpec. Wa_1606931601 applies for all TGL steppings. This patch moves the WA implementation out of A0 only block of rcs_engine_wa_init(). The WA is has also been referred to by an alternate name Wa_1607090982. Bspec: 46045, 52890 Fixes: 3873fd1a ("drm/i915: Use engine wa list for Wa_1607090982") Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
Matt Atwood authored
Disable Push Constant buffer addition for TGL. v2: typos, add additional Wa reference v3: use REG_BIT macro, move to rcs_engine_wa_init, clean up commit message. Bspec: 52890 Cc: Rafael Antognolli <rafael.antognolli@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by:
-
José Roberto de Souza authored
This will whitelist the HIZ_CHICKEN register so mesa can disable the optimizations and avoid hang when using D16_UNORM. v2: moved to the right place and used the right function() (Chris) Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Rafael Antognolli <rafael.antognolli@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
José Roberto de Souza authored
This workaround the CS not done issue on PIPE_CONTROL. v2: - replaced BIT() by REG_BIT() in all GEN7_ROW_CHICKEN2() bits - shortened the name of the new bit BSpec: 52890 BSpec: 46218 Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Imre Deak authored
All platforms using the shared DPLL framework use 3 reference clocks for their DPLLs: SSC, non-SSC and DSI. For a more unified way across platforms store the frequency of these ref clocks as part of the DPLL global state. This also allows us to keep the HW access reading out the ref clock value separate from the DPLL frequency calculation that depends on the ref clock. For now add only the SSC and non-SSC ref clocks, as the pre-ICL DSI code has its own logic for calculating DPLL parameters instead of the shared DPLL framework. v2: - Apply the ICL combo PHY PLL ref_clock/2 adjustment during the frequency->PLL param conversion direction as well. (CI shards) - s/kHZ/kHz/ (Ville) Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Imre Deak authored
Instead of reading out the WRPLL/SPLL control values from HW, we can use the DPLL state that was already read out, or swapped-to. Signed-off-by:
-
Imre Deak authored
Split out the PLL parameter->frequency conversion logic for each type of PLL for symmetry with their corresponding inverse conversion functions. Signed-off-by:
-
Imre Deak authored
Split out the PLL parameter->frequency conversion logic for each type of PLL for symmetry with their corresponding inverse conversion functions. Signed-off-by:
-
Imre Deak authored
For consistency with the WRPLL/LCPLL parameter calculation functions, split out the SPLL specific logic to its own function. Signed-off-by:
-
Imre Deak authored
The types of PLLs used for HDMI/DP on HSW are WRPLL/LCPLL accordingly, so use these names to align better with the rest of WRPLL/LCPLL function names elsewhere. Signed-off-by:
-
Imre Deak authored
For clarity keep the SKL DPLL ref clock in a variable instead of open-coding it. Store the value in kHZ units as done on other platforms. This allows us in a later patch to keep track of the DPLL ref clock in a more unified way across all platforms. Signed-off-by:
-
Imre Deak authored
Move all the DPLL params->DPLL frequency conversion functions to intel_dpll_mgr.c where the corresponding inverse conversions are. The GEN11+ TBT PLL outputs multiple frequencies and for selecting the one in use we need to check the DDI CLK mux. As part of the DDI clock logic this selection is kept in intel_ddi.c. Signed-off-by:
-
Imre Deak authored
Instead of converting DPLL ID to CLK_SEL to identify the DPLL use the DPLL ID directly for this. Signed-off-by:
-
Imre Deak authored
Move the per-platform DPLL and DPLL-manager vfunc initializations right after the corresponding function definitions. Signed-off-by:
-
