- 19 Apr, 2020 4 commits
-
-
Alexandru Ardelean authored
Now that all channel SigmaDelta IIO channel macros have been localized, remove the generic ones. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Alexandru Ardelean authored
This driver seems to use most of the AD_SD_*_CHANNEL. This change will move them in the driver. The intent is that if a new part comes along which would require tweaks per IIO channel, these should be doable in the driver. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Alexandru Ardelean authored
This driver seems to use most of the AD_SD_*_CHANNEL. This change will move them in the driver. The intent is that if a new part comes along which would require tweaks per IIO channel, these should be doable in the driver. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Alexandru Ardelean authored
This change gets rid of the AD_SD_*_CHANNEL macros in favor of defining it's own. The ad7780 is quite simpler than it's other Sigma-Delta brothers. It turned out that centralizing the AD_SD_*_CHANNEL macros doesn't scale too well, especially with some more complicated drivers. Some of the variations in the more complicated drivers require new macros, and that way things can become harder to maintain. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
- 21 Mar, 2020 18 commits
-
-
Nishant Malpani authored
This patch renames macro to fix the following warning generated by checkpatch.pl: WARNING: 'DISBLED' may be misspelled - perhaps 'DISABLED'? Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Rohit Sarkar authored
"mlock" should ideally only be used by the iio core. The mlock implementation may change in the future which means that no driver should be explicitly using mlock. Signed-off-by: Rohit Sarkar <rohitsarkar5398@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Daniel Campello authored
Add SEMTECH SX9310/9311 driver. The device has the following entry points: Usual frequency: - sampling_frequency - sampling_frequency_available Instant reading of current values for different sensors: - in_proximity0_raw - in_proximity1_raw - in_proximity2_raw - in_proximity3_comb_raw and associated events in events/ Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Enrico Granata <egranata@chromium.org> Signed-off-by: Daniel Campello <campello@chromium.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Beniamin Bia authored
Use devm_add_action_or_reset to automatically disable the device when it is removed or an error occurs during probe routine. Signed-off-by: Beniamin Bia <beniamin.bia@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Dragos Bogdan authored
AD7091R is already supported by this driver. While AD7091R allows the choice of an internal or an external voltage reference, for AD7091 the reference is only provided by VDD. Since this information is anyway obtained through the "vcc" regulator, no other driver changes are required for adding AD7091 support as well. Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Signed-off-by: Beniamin Bia <beniamin.bia@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Dragos Bogdan authored
When CONVST signal is generated internally, IIO_CHAN_INFO_RAW can be made available for AD7091R for single reads. This patch enables it and makes supporting more devices by this driver easier. Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Signed-off-by: Beniamin Bia <beniamin.bia@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Dragos Bogdan authored
Compared to the other supported parts, AD7091R are dependent of a CONVST signal that initiates the conversion. At this moment, only sampling in buffered mode is supported for AD7091R and the only option until now was to generate this signal externally using an IIO trigger. This patch adds the option of generating it internally, more compatible triggers being available in this case. Also, it is an intermediate step of adding support more devices. Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Signed-off-by: Beniamin Bia <beniamin.bia@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Andy Shevchenko authored
There is no need to call unaligned helpers on stack placed variables because compiler will align them correctly, accordingly to architectural ABI. Moreover, using bitwise type makes it explicit to see what we are reading in bulk transfer. On top of that, use sizeof() instead of magic value. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Andy Shevchenko authored
Explicit casting in printf() usually shows that something is not okay. Here, we really don't need it by providing correct specifier. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Andy Shevchenko authored
Device property API allows to gather device resources from different sources, such as ACPI. Convert the drivers to unleash the power of device property API. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Andy Shevchenko authored
Use dev_get_platdata() to get the platform_data instead of referencing it directly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Andy Shevchenko authored
For easy grepping on debug purposes join string literals back in the messages. No functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Andy Shevchenko authored
Explicit casting in printf() usually shows that something is not okay. Here, we really don't need it by providing correct specifier. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Andy Shevchenko authored
In few places the unnecessary explicit castings are being used. Drop them for good. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Andy Shevchenko authored
Use dev_get_platdata() to get the platform_data instead of referencing it directly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Andy Shevchenko authored
Explicit casting in printf() usually shows that something is not okay. Here, we really don't need it by providing correct specifier. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Lars-Peter Clausen authored
It appears the author of the xilinx-xadc driver can't even spell his own name correctly. Fix that. Reported-by: Lars Möllendorf <lars.moellendorf@plating.de> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
- 20 Mar, 2020 10 commits
-
-
Sergio Paracuellos authored
Function 'devm_gpiod_get_index_optional' returns NULL if the descriptor is invalid and the error associated for the error pointer is ENOENT. Sometimes if the pin is just assigned the error associated for the pointer might not be ENOENT but other. In order to avoid weirds behaviours if this happen set descriptor to NULL in the driver port structure. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20200320110123.9907-6-sergio.paracuellos@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sergio Paracuellos authored
We are using the counter to print the slot which has been enabled. Use the correct associated slot for the port instead. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20200320110123.9907-5-sergio.paracuellos@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sergio Paracuellos authored
In order to align work with the mt7621-pci-phy part of the driver and device tree which is now using only two real phys one of them dual ported properly parse the device tree and don't call phy initialization for the slot 1 because is being taking into account when the phy for the slot 0 is instantiated. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20200320110123.9907-4-sergio.paracuellos@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sergio Paracuellos authored
This soc has only two real pcie phys one of them having a different register to enable and disable it. Change this to have only two dt nodes for the phys and use 'phy-cells' properly to say if the phy has dual ports. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20200320110123.9907-3-sergio.paracuellos@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sergio Paracuellos authored
This soc has two phy's for the pcie one of them using just a different register for settig it up but sharing all the rest of the config. Until now we was presenting this schema as three different phy's in the device tree using the 'phy-cells' node property to discriminate an index and setting up a complete phy for the dual port index. This sometimes worked properly but reconfiguring the same registers twice presents sometimes some unstable pcie links and the ports was not properly being detected. The problems only appears on hard resets and soft resets was properly working. Instead of having this schema just set two phy's in the device ree and use the 'phy-cells' property to say if the port has or not a dual port. Doing this configuration and set up becomes easier, LOC is decreased and the behaviour also gets deterministic with properly and stable pcie links in both hard and soft resets. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20200320110123.9907-2-sergio.paracuellos@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
R Veera Kumar authored
Correct long lines of comments to respect 80 character per line limit and make them C89 style one. Found using checkpatch.pl. Signed-off-by: R Veera Kumar <vkor@vkten.in> Link: https://lore.kernel.org/r/20200320024337.4754-1-vkor@vkten.inSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
R Veera Kumar authored
Correct typos in comments. Misspellings found using checkpatch.pl. Signed-off-by: R Veera Kumar <vkor@vkten.in> Link: https://lore.kernel.org/r/46d4e7cd66ec8d5bf7445201e10e3d50fe1c618e.1584687545.git.vkor@vkten.inSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
R Veera Kumar authored
Correct multi-line comments as per coding style to respect 80 characters per line limit. Amalgamate individual lines into single multiline comment. Reorganize it for readability. Signed-off-by: R Veera Kumar <vkor@vkten.in> Link: https://lore.kernel.org/r/5b5cdb520df6d579a6659fbe45ac545628be50e4.1584687545.git.vkor@vkten.inSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lourdes Pedrajas authored
use netdev_err() which is a message printing function specific for network devices instead of pr_err(), in function netlink_send(). Signed-off-by: Lourdes Pedrajas <lu@pplo.net> Link: https://lore.kernel.org/r/20200320003947.31726-1-lu@pplo.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gokce Kuler authored
Remove unnecessary braces for single statement block Signed-off-by: Gokce Kuler <gokcekuler@gmail.com> Link: https://lore.kernel.org/r/20200320000326.GA9349@siyah2Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 19 Mar, 2020 8 commits
-
-
R Veera Kumar authored
Correct typo in two comments. Misspelling found using checkpatch.pl. Signed-off-by: R Veera Kumar <vkor@vkten.in> Link: https://lore.kernel.org/r/1ea4ff5dedf35b51afc53866c303b62a66caff7d.1584633953.git.vkor@vkten.inSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sergio Paracuellos authored
In some platforms gpio's are not used for reset but for other purposes. Because of that when we try to get them are valid gpio's but are already assigned to do other function. To avoid those kind of problems in those platforms just notice the fail in the kernel but continue doing normal boot. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20200319161416.19033-1-sergio.paracuellos@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-rpi-kernel@lists.infradead.org Cc: devel@driverdev.osuosl.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200319161300.25967-1-tiwai@suse.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sergio Paracuellos authored
Instead of being using PCI Configuration and Status Register to set up virtual bridges we are using CONFIG_ADDR Register which is wrong. Hence, set the correct value. Fixes: 9a5e71a6 ("staging: mt7621-pci: simplify 'mt7621_pcie_init_virtual_bridges' function") Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20200319095733.1557-1-sergio.paracuellos@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oscar Carter authored
Use ARRAY_SIZE to replace the hardcoded size so we will never have a mismatch. Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Link: https://lore.kernel.org/r/20200318174015.7515-1-oscar.carter@gmx.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
R Veera Kumar authored
Add a newline after the first argument. To respect the 80 character line limit. Found using checkpatch.pl. Signed-off-by: R Veera Kumar <vkor@vkten.in> Link: https://lore.kernel.org/r/20200319094835.GA2878@tulip.localSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
R Veera Kumar authored
A simple fix of long line in makefile variable assignment. Found using checkpatch.pl. Signed-off-by: R Veera Kumar <vkor@vkten.in> Link: https://lore.kernel.org/r/20200319095024.GA2970@tulip.localSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
R Veera Kumar authored
Fixes two long line in Kconfig help. Found using checkpatch.pl Signed-off-by: R Veera Kumar <vkor@vkten.in> Link: https://lore.kernel.org/r/20200319095513.GA3078@tulip.localSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-