When not decoding, the options "-B -N --no-bpf-event" speed up perf record.
Make a common function for them.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-3-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

count_result() does not always reset ret=0 which means the value can spill
into the next test result.

Fix by explicitly setting it to zero between tests.

Committer testing:

  # perf test "Miscellaneous Intel PT testing"
  110: Miscellaneous Intel PT testing               : Ok
  #

Tested as well with:

  # perf test -v "Miscellaneous Intel PT testing"

Fixes: fd9b45e3 ("perf test: test_intel_pt.sh: Fix return checking")
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-2-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

If the kernel exposes a new perf_event_attr field in a format attr, perf
will return an error stating the specified PMU can't be found. For
example, a format attr with 'config3:0-63' causes an error as config3 is
unknown to perf. This causes a compatibility issue between a newer
kernel with older perf tool.

Before this change with a kernel adding 'config3' I get:

  $ perf record -e arm_spe// -- true
  event syntax error: 'arm_spe//'
                       \___ Cannot find PMU `arm_spe'. Missing kernel support?
  Run 'perf list' for a list of valid events

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list
  available events

After this change, I get:

  $ perf record -e arm_spe// -- true
  WARNING: 'arm_spe_0' format 'inv_event_filter' requires 'perf_event_attr::config3' which is not supported by this version of perf!
  [ perf record: Woken up 2 times to write data ]
  [ perf record: Captured and wrote 0.091 MB perf.data ]

To support unknown configN formats, rework the YACC implementation to
pass any config[0-9]+ format to perf_pmu__new_format() to handle with a
warning.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220914-arm-perf-tool-spe1-2-v2-v4-1-83c098e6212e@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

  $ perf list metricgroups

gives

  List of pre-defined events (to be used in -e):

  Metric Groups:

  Backend
  Bad
  BadSpec

But that's incorrect of course because metric groups or metrics can only
be specified with -M. So fix the message to say -e or -M
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20221004192634.998984-1-ak@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The -C/--cpu option was maily for report but it also affected record as
it ate the option.  So users needed to use "--" after perf mem record to
pass the info to the perf record properly.

Check if this option is set for record, and pass it to the actual perf
record.

Before)
  $ sudo perf --debug perf-event-open mem record -C 0 2>&1 | grep -a sys_perf_event_open
  ...
  sys_perf_event_open: pid -1  cpu 0  group_fd -1  flags 0x8 = 4
  sys_perf_event_open: pid -1  cpu 1  group_fd -1  flags 0x8 = 5
  sys_perf_event_open: pid -1  cpu 2  group_fd -1  flags 0x8 = 6
  sys_perf_event_open: pid -1  cpu 3  group_fd -1  flags 0x8 = 7
  sys_perf_event_open: pid -1  cpu 0  group_fd -1  flags 0x8 = 8
  sys_perf_event_open: pid -1  cpu 1  group_fd -1  flags 0x8 = 9
  sys_perf_event_open: pid -1  cpu 2  group_fd -1  flags 0x8 = 10
  sys_perf_event_open: pid -1  cpu 3  group_fd -1  flags 0x8 = 11
  ...

After)
  $ sudo perf --debug perf-event-open mem record -C 0 2>&1 | grep -a sys_perf_event_open
  ...
  sys_perf_event_open: pid -1  cpu 0  group_fd -1  flags 0x8 = 4
  sys_perf_event_open: pid -1  cpu 0  group_fd -1  flags 0x8 = 5
  sys_perf_event_open: pid -1  cpu 0  group_fd -1  flags 0x8 = 6
  sys_perf_event_open: pid -1  cpu 0  group_fd -1  flags 0x8 = 7
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221004200211.1444521-1-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

According to the document [1], it can also have 'hs', 'lo', 'vc', 'vs' as a
condition code.  Let's add them too.

[1] https://community.arm.com/arm-community-blogs/b/architectures-and-processors-blog/posts/condition-codes-1-condition-flags-and-codesReported-by: Kevin Nomura <nomurak@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20221006222232.266416-1-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Its just for that __packed define, so use it expanded as __attribute__((packed)),
like the other files in /usr/include do.

This was problem was preventing building the libperf examples on ALT
Linux and Fedora 35, fix it.
Reported-by: Vitaly Chikunov <vt@altlinux.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dmitry Levin <ldv@altlinux.org
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/Y0lnpl2Ix7VljVDc@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This test commonly fails on Arm Juno because the instruction interval
is large enough to miss generating any samples for Perf in system-wide
mode.

Fix this by lowering the interval until a comfortable number of Perf
instructions are generated. The test is still quick to run because only
a small amount of trace is gathered.

Before:

  sudo ./perf test coresight -vvv
  ...
  Recording trace with system wide mode
  Looking at perf.data file for dumping branch samples:
  Looking at perf.data file for reporting branch samples:
  Looking at perf.data file for instruction samples:
  CoreSight system wide testing: FAIL
  ...

After:

  sudo ./perf test coresight -vvv
  ...
  Recording trace with system wide mode
  Looking at perf.data file for dumping branch samples:
  Looking at perf.data file for reporting branch samples:
  Looking at perf.data file for instruction samples:
  CoreSight system wide testing: PASS
  ...
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20221005140508.1537277-1-james.clark@arm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The recent change in the cgroup will break the backward compatiblity in
the BPF program.  It should support both old and new kernels using BPF
CO-RE technique.

Like the task_struct->__state handling in the offcpu analysis, we can
check the field name in the cgroup struct.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: bpf@vger.kernel.org
Cc: cgroups@vger.kernel.org
Cc: zefan li <lizefan.x@bytedance.com>
Link: http://lore.kernel.org/lkml/20221011052808.282394-1-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull more drm updates from Dave Airlie:
 "Round of fixes for the merge window stuff, bunch of amdgpu and i915
  changes, this should have the gcc11 warning fix, amongst other
  changes.

  amdgpu:
   - DC mutex fix
   - DC SubVP fixes
   - DCN 3.2.x fixes
   - DCN 3.1.x fixes
   - SDMA 6.x fixes
   - Enable DPIA for 3.1.4
   - VRR fixes
   - VRAM BO swapping fix
   - Revert dirty fb helper change
   - SR-IOV suspend/resume fixes
   - Work around GCC array bounds check fail warning
   - UMC 8.10 fixes
   - Misc fixes and cleanups

  i915:
   - Round to closest in g4x+ HDMI clock readout
   - Update MOCS table for EHL
   - Fix PSR_IMR/IIR field handling
   - Fix watermark calculations for gen12+/DG2 modifiers
   - Reject excessive dotclocks early
   - Fix revocation of non-persistent contexts
   - Handle migration for dpt
   - Fix display problems after resume
   - Allow control over the flags when migrating
   - Consider DG2_RC_CCS_CC when migrating buffers"

* tag 'drm-next-2022-10-14' of git://anongit.freedesktop.org/drm/drm: (110 commits)
  drm/amd/display: Add HUBP surface flip interrupt handler
  drm/i915/display: consider DG2_RC_CCS_CC when migrating buffers
  drm/i915: allow control over the flags when migrating
  drm/amd/display: Simplify bool conversion
  drm/amd/display: fix transfer function passed to build_coefficients()
  drm/amd/display: add a license to cursor_reg_cache.h
  drm/amd/display: make virtual_disable_link_output static
  drm/amd/display: fix indentation in dc.c
  drm/amd/display: make dcn32_split_stream_for_mpc_or_odm static
  drm/amd/display: fix build error on arm64
  drm/amd/display: 3.2.207
  drm/amd/display: Clean some DCN32 macros
  drm/amdgpu: Add poison mode query for umc v8_10_0
  drm/amdgpu: Update umc v8_10_0 headers
  drm/amdgpu: fix coding style issue for mca notifier
  drm/amdgpu: define convert_error_address for umc v8.7
  drm/amdgpu: define RAS convert_error_address API
  drm/amdgpu: remove check for CE in RAS error address query
  drm/i915: Fix display problems after resume
  drm/amd/display: fix array-bounds error in dc_stream_remove_writeback() [take 2]
  ...

Pull more block updates from Jens Axboe:
 "Fixes that ended up landing later than the initial block pull request.
  Nothing really major in here:

   - NVMe pull request via Christoph:
        - add NVME_QUIRK_BOGUS_NID for Lexar NM760 (Abhijit)
        - add NVME_QUIRK_NO_DEEPEST_PS to avoid the deepest sleep state
          on ZHITAI TiPro5000 SSDs (Xi Ruoyao)
        - fix possible hang caused during ctrl deletion (Sagi Grimberg)
        - fix possible hang in live ns resize with ANA access (Sagi
          Grimberg)

   - Proactively avoid a sign extension issue with the queue flags
     (Brian)

   - Regression fix for hidden disks (Christoph)

   - Update OPAL maintainers entry (Jonathan)

   - blk-wbt regression initialization fix (Yu)"

* tag 'block-6.1-2022-10-13' of git://git.kernel.dk/linux:
  nvme-multipath: fix possible hang in live ns resize with ANA access
  nvme-pci: avoid the deepest sleep state on ZHITAI TiPro5000 SSDs
  nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM760
  nvme-tcp: fix possible hang caused during ctrl deletion
  nvme-rdma: fix possible hang caused during ctrl deletion
  block: fix leaking minors of hidden disks
  block: avoid sign extend problem with default queue flags mask
  blk-wbt: fix that 'rwb->wc' is always set to 1 in wbt_init()
  block: Remove the repeat word 'can'
  MAINTAINERS: Update SED-Opal Maintainers

Pull more io_uring updates from Jens Axboe:
 "A collection of fixes that ended up either being later than the
  initial pull, or dependent on multiple branches (6.0-late being one of
  them) and hence deferred purposely. This contains:

   - Cleanup fixes for the single submitter late 6.0 change, which we
     pushed to 6.1 to keep the 6.0 changes small (Dylan, Pavel)

   - Fix for IORING_OP_CONNECT not handling -EINPROGRESS correctly (me)

   - Ensure that the zc sendmsg variant gets audited correctly (me)

   - Regression fix from this merge window where kiocb_end_write()
     doesn't always gets called, which can cause issues with fs freezing
     (me)

   - Registered files SCM handling fix (Pavel)

   - Regression fix for big sqe dumping in fdinfo (Pavel)

   - Registered buffers accounting fix (Pavel)

   - Remove leftover notification structures, we killed them off late in
     6.0 (Pavel)

   - Minor optimizations (Pavel)

   - Cosmetic variable shadowing fix (Stefan)"

* tag 'io_uring-6.1-2022-10-13' of git://git.kernel.dk/linux:
  io_uring/rw: ensure kiocb_end_write() is always called
  io_uring: fix fdinfo sqe offsets calculation
  io_uring: local variable rw shadows outer variable in io_write
  io_uring/opdef: remove 'audit_skip' from SENDMSG_ZC
  io_uring: optimise locking for local tw with submit_wait
  io_uring: remove redundant memory barrier in io_req_local_work_add
  io_uring/net: handle -EINPROGRESS correct for IORING_OP_CONNECT
  io_uring: remove notif leftovers
  io_uring: correct pinned_vm accounting
  io_uring/af_unix: defer registered files gc to io_uring release
  io_uring: limit registration w/ SINGLE_ISSUER
  io_uring: remove io_register_submitter
  io_uring: simplify __io_uring_add_tctx_node

Merge tag 'amd-drm-fixes-6.1-2022-10-12' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-fixes-6.1-2022-10-12:

amdgpu:
- DC mutex fix
- DC SubVP fixes
- DCN 3.2.x fixes
- DCN 3.1.x fixes
- SDMA 6.x fixes
- Enable DPIA for 3.1.4
- VRR fixes
- VRAM BO swapping fix
- Revert dirty fb helper change
- SR-IOV suspend/resume fixes
- Work around GCC array bounds check fail warning
- UMC 8.10 fixes
- Misc fixes and cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221012162650.8810-1-alexander.deucher@amd.com

Merge tag 'drm-intel-next-fixes-2022-10-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Fix revocation of non-persistent contexts (Tvrtko Ursulin)
- Handle migration for dpt (Matthew Auld)
- Fix display problems after resume (Thomas Hellström)
- Allow control over the flags when migrating (Matthew Auld)
- Consider DG2_RC_CCS_CC when migrating buffers (Matthew Auld)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y0gK9QmCmktLLzqp@tursulin-desk

Pull devicetree fixes from Rob Herring:

 - Fixes for Mediatek MT6370 binding

 - Merge the DT overlay maintainer entry to the main entry as Pantelis
   is not active and Frank is taking a step back

* tag 'devicetree-fixes-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  MAINTAINERS: of: collapse overlay entry into main device tree entry
  dt-bindings: mfd: mt6370: fix the interrupt order of the charger in the example
  dt-bindings: leds: mt6370: Fix MT6370 LED indicator DT warning

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Add SD card quirk for broken discard

  MMC host:
   - renesas_sdhi: Fix clock rounding errors
   - sdhci-sprd: Fix minimum clock limit to detect cards
   - sdhci-tegra: Use actual clock rate for SW tuning correction"

* tag 'mmc-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-sprd: Fix minimum clock limit
  mmc: sdhci-tegra: Use actual clock rate for SW tuning correction
  mmc: renesas_sdhi: Fix rounding errors
  mmc: core: Add SD card quirk for broken discard

Pull documentation fixes from Jonathan Corbet:
 "A handful of relatively simple documentation fixes, plus a set of
  patches catching the Chinese translation up with the front-page
  rework"

* tag 'docs-6.1-2' of git://git.lwn.net/linux:
  Documentation: rtla: Correct command line example
  docs/zh_CN: add a man-pages link to zh_CN/index.rst
  docs/zh_CN: Rewrite the Chinese translation front page
  docs/zh_CN: add zh_CN/arch.rst
  docs/zh_CN: promote the title of zh_CN/process/index.rst
  docs/zh_CN: Update the translation of page_owner to 6.0-rc7
  docs/zh_CN: Update the translation of ksm to 6.0-rc7
  docs/howto: Replace abundoned URL of gmane.org
  Documentation: ubifs: Fix compression idiom
  Documentation/mm/page_owner.rst: delete frequently changing experimental data
  docs/zh_CN: Fix build warning
  docs: ftrace: Correct access mode

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, and wifi.

Current release - regressions:

   - Revert "net/sched: taprio: make qdisc_leaf() see the
     per-netdev-queue pfifo child qdiscs", it may cause crashes when the
     qdisc is reconfigured

   - inet: ping: fix splat due to packet allocation refactoring in inet

   - tcp: clean up kernel listener's reqsk in inet_twsk_purge(), fix UAF
     due to races when per-netns hash table is used

  Current release - new code bugs:

   - eth: adin1110: check in netdev_event that netdev belongs to driver

   - fixes for PTR_ERR() vs NULL bugs in driver code, from Dan and co.

  Previous releases - regressions:

   - ipv4: handle attempt to delete multipath route when fib_info
     contains an nh reference, avoid oob access

   - wifi: fix handful of bugs in the new Multi-BSSID code

   - wifi: mt76: fix rate reporting / throughput regression on mt7915
     and newer, fix checksum offload

   - wifi: iwlwifi: mvm: fix double list_add at
     iwl_mvm_mac_wake_tx_queue (other cases)

   - wifi: mac80211: do not drop packets smaller than the LLC-SNAP
     header on fast-rx

  Previous releases - always broken:

   - ieee802154: don't warn zero-sized raw_sendmsg()

   - ipv6: ping: fix wrong checksum for large frames

   - mctp: prevent double key removal and unref

   - tcp/udp: fix memory leaks and races around IPV6_ADDRFORM

   - hv_netvsc: fix race between VF offering and VF association message

  Misc:

   - remove -Warray-bounds silencing in the drivers, compilers fixed"

* tag 'net-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
  sunhme: fix an IS_ERR() vs NULL check in probe
  net: marvell: prestera: fix a couple NULL vs IS_ERR() checks
  kcm: avoid potential race in kcm_tx_work
  tcp: Clean up kernel listener's reqsk in inet_twsk_purge()
  net: phy: micrel: Fixes FIELD_GET assertion
  openvswitch: add nf_ct_is_confirmed check before assigning the helper
  tcp: Fix data races around icsk->icsk_af_ops.
  ipv6: Fix data races around sk->sk_prot.
  tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct().
  udp: Call inet6_destroy_sock() in setsockopt(IPV6_ADDRFORM).
  tcp/udp: Fix memory leak in ipv6_renew_options().
  mctp: prevent double key removal and unref
  selftests: netfilter: Fix nft_fib.sh for all.rp_filter=1
  netfilter: rpfilter/fib: Populate flowic_l3mdev field
  selftests: netfilter: Test reverse path filtering
  net/mlx5: Make ASO poll CQ usable in atomic context
  tcp: cdg: allow tcp_cdg_release() to be called multiple times
  inet: ping: fix recent breakage
  ipv6: ping: fix wrong checksum for large frames
  net: ethernet: ti: am65-cpsw: set correct devlink flavour for unused ports
  ...

Pull virtio fixes from Michael Tsirkin:

 - Fix a regression in virtio pci on power

 - Add a reviewer for ifcvf

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vdpa/ifcvf: add reviewer
  virtio_pci: use irq to detect interrupt support

Pull tracing fixes from Steven Rostedt:

 - Found that the synthetic events were using strlen/strscpy() on values
   that could have come from userspace, and that is bad.

   Consolidate the string logic of kprobe and eprobe and extend it to
   the synthetic events to safely process string addresses.

 - Clean up content of text dump in ftrace_bug() where the output does
   not make char reads into signed and sign extending the byte output.

 - Fix some kernel docs in the ring buffer code.

* tag 'trace-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Fix reading strings from synthetic events
  tracing: Add "(fault)" name injection to kernel probes
  tracing: Move duplicate code of trace_kprobe/eprobe.c into header
  ring-buffer: Fix kernel-doc
  ftrace: Fix char print issue in print_ip_ins()

Pull watchdog updates from Wim Van Sebroeck:

 - new driver for Exar/MaxLinear XR28V38x

 - support for exynosautov9 SoC

 - support for Renesas R-Car V5H (R8A779G0) and RZ/V2M (r9a09g011) SoC

 - support for imx93

 - several other fixes and improvements

* tag 'linux-watchdog-6.1-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits)
  watchdog: twl4030_wdt: add missing mod_devicetable.h include
  dt-bindings: watchdog: migrate mt7621 text bindings to YAML
  watchdog: sp5100_tco: Add "action" module parameter
  watchdog: imx93: add watchdog timer on imx93
  watchdog: imx7ulp_wdt: init wdog when it was active
  watchdog: imx7ulp_wdt: Handle wdog reconfigure failure
  watchdog: imx7ulp_wdt: Fix RCS timeout issue
  watchdog: imx7ulp_wdt: Check CMD32EN in wdog init
  watchdog: imx7ulp: Add explict memory barrier for unlock sequence
  watchdog: imx7ulp: Move suspend/resume to noirq phase
  watchdog: rti-wdt:using the pm_runtime_resume_and_get to simplify the code
  dt-bindings: watchdog: rockchip: add rockchip,rk3128-wdt
  watchdog: s3c2410_wdt: support exynosautov9 watchdog
  dt-bindings: watchdog: add exynosautov9 compatible
  watchdog: npcm: Enable clock if provided
  watchdog: meson: keep running if already active
  watchdog: dt-bindings: atmel,at91sam9-wdt: convert to json-schema
  watchdog: armada_37xx_wdt: Fix .set_timeout callback
  watchdog: sa1100: make variable sa1100dog_driver static
  watchdog: w83977f_wdt: Fix comment typo
  ...

Pull ceph updates from Ilya Dryomov:
 "A quiet round this time: several assorted filesystem fixes, the most
  noteworthy one being some additional wakeups in cap handling code, and
  a messenger cleanup"

* tag 'ceph-for-6.1-rc1' of https://github.com/ceph/ceph-client:
  ceph: remove Sage's git tree from documentation
  ceph: fix incorrectly showing the .snap size for stat
  ceph: fail the open_by_handle_at() if the dentry is being unlinked
  ceph: increment i_version when doing a setattr with caps
  ceph: Use kcalloc for allocating multiple elements
  ceph: no need to wait for transition RDCACHE|RD -> RD
  ceph: fail the request if the peer MDS doesn't support getvxattr op
  ceph: wake up the waiters if any new caps comes
  libceph: drop last_piece flag from ceph_msg_data_cursor

Pull NFS client updates from Anna Schumaker:
 "New Features:
   - Add NFSv4.2 xattr tracepoints
   - Replace xprtiod WQ in rpcrdma
   - Flexfiles cancels I/O on layout recall or revoke

  Bugfixes and Cleanups:
   - Directly use ida_alloc() / ida_free()
   - Don't open-code max_t()
   - Prefer using strscpy over strlcpy
   - Remove unused forward declarations
   - Always return layout states on flexfiles layout return
   - Have LISTXATTR treat NFS4ERR_NOXATTR as an empty reply instead of
     error
   - Allow more xprtrdma memory allocations to fail without triggering a
     reclaim
   - Various other xprtrdma clean ups
   - Fix rpc_killall_tasks() races"

* tag 'nfs-for-6.1-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (27 commits)
  NFSv4/flexfiles: Cancel I/O if the layout is recalled or revoked
  SUNRPC: Add API to force the client to disconnect
  SUNRPC: Add a helper to allow pNFS drivers to selectively cancel RPC calls
  SUNRPC: Fix races with rpc_killall_tasks()
  xprtrdma: Fix uninitialized variable
  xprtrdma: Prevent memory allocations from driving a reclaim
  xprtrdma: Memory allocation should be allowed to fail during connect
  xprtrdma: MR-related memory allocation should be allowed to fail
  xprtrdma: Clean up synopsis of rpcrdma_regbuf_alloc()
  xprtrdma: Clean up synopsis of rpcrdma_req_create()
  svcrdma: Clean up RPCRDMA_DEF_GFP
  SUNRPC: Replace the use of the xprtiod WQ in rpcrdma
  NFSv4.2: Add a tracepoint for listxattr
  NFSv4.2: Add tracepoints for getxattr, setxattr, and removexattr
  NFSv4.2: Move TRACE_DEFINE_ENUM(NFS4_CONTENT_*) under CONFIG_NFS_V4_2
  NFSv4.2: Add special handling for LISTXATTR receiving NFS4ERR_NOXATTR
  nfs: remove nfs_wait_atomic_killable() and nfs_write_prepare() declaration
  NFSv4: remove nfs4_renewd_prepare_shutdown() declaration
  fs/nfs/pnfs_nfs.c: fix spelling typo and syntax error in comment
  NFSv4/pNFS: Always return layout stats on layout return for flexfiles
  ...

Pull orangefs update from Mike Marshall:
 "Change iterate to iterate_shared"

* tag 'for-linus-6.1-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  Orangefs: change iterate to iterate_shared

The '-t/-T' parameters seem to have been swapped:
-t/--trace[=file]: save the stopped trace
to [file|timerlat_trace.txt]
-T/--thread us: stop trace if the thread latency
is higher than the argument in us

Swap them back.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Link: https://lore.kernel.org/r/20221006084409.3882542-1-pierre.gondois@arm.comSigned-off-by: Jonathan Corbet <corbet@lwn.net>

The devm_request_region() function does not return error pointers, it
returns NULL on error.

Fixes: 914d9b27 ("sunhme: switch to devres")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Link: https://lore.kernel.org/r/Y0bWzJL8JknX8MUf@kiliSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The __prestera_nexthop_group_create() function returns NULL on error
and the prestera_nexthop_group_get() returns error pointers.  Fix these
two checks.

Fixes: 0a23ae23 ("net: marvell: prestera: Add router nexthops ABI")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/Y0bWq+7DoKK465z8@kiliSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot found that kcm_tx_work() could crash [1] in:

	/* Primarily for SOCK_SEQPACKET sockets */
	if (likely(sk->sk_socket) &&
	    test_bit(SOCK_NOSPACE, &sk->sk_socket->flags)) {
<<*>>	clear_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
		sk->sk_write_space(sk);
	}

I think the reason is that another thread might concurrently
run in kcm_release() and call sock_orphan(sk) while sk is not
locked. kcm_tx_work() find sk->sk_socket being NULL.

[1]
BUG: KASAN: null-ptr-deref in instrument_atomic_write include/linux/instrumented.h:86 [inline]
BUG: KASAN: null-ptr-deref in clear_bit include/asm-generic/bitops/instrumented-atomic.h:41 [inline]
BUG: KASAN: null-ptr-deref in kcm_tx_work+0xff/0x160 net/kcm/kcmsock.c:742
Write of size 8 at addr 0000000000000008 by task kworker/u4:3/53

CPU: 0 PID: 53 Comm: kworker/u4:3 Not tainted 5.19.0-rc3-next-20220621-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: kkcmd kcm_tx_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
kasan_report+0xbe/0x1f0 mm/kasan/report.c:495
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0x13d/0x180 mm/kasan/generic.c:189
instrument_atomic_write include/linux/instrumented.h:86 [inline]
clear_bit include/asm-generic/bitops/instrumented-atomic.h:41 [inline]
kcm_tx_work+0xff/0x160 net/kcm/kcmsock.c:742
process_one_work+0x996/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e9/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
</TASK>

Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Link: https://lore.kernel.org/r/20221012133412.519394-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Eric Dumazet reported a use-after-free related to the per-netns ehash
series. [0]

When we create a TCP socket from userspace, the socket always holds a
refcnt of the netns.  This guarantees that a reqsk timer is always fired
before netns dismantle.  Each reqsk has a refcnt of its listener, so the
listener is not freed before the reqsk, and the net is not freed before
the listener as well.

OTOH, when in-kernel users create a TCP socket, it might not hold a refcnt
of its netns.  Thus, a reqsk timer can be fired after the netns dismantle
and access freed per-netns ehash.

To avoid the use-after-free, we need to clean up TCP_NEW_SYN_RECV sockets
in inet_twsk_purge() if the netns uses a per-netns ehash.

[0]: https://lore.kernel.org/netdev/CANn89iLXMup0dRD_Ov79Xt8N9FM0XdhCHEN05sf3eLwxKweM6w@mail.gmail.com/

BUG: KASAN: use-after-free in tcp_or_dccp_get_hashinfo
include/net/inet_hashtables.h:181 [inline]
BUG: KASAN: use-after-free in reqsk_queue_unlink+0x320/0x350
net/ipv4/inet_connection_sock.c:913
Read of size 8 at addr ffff88807545bd80 by task syz-executor.2/8301

CPU: 1 PID: 8301 Comm: syz-executor.2 Not tainted
6.0.0-syzkaller-02757-gaf7d23f9 #0
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 09/22/2022
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:317 [inline]
print_report.cold+0x2ba/0x719 mm/kasan/report.c:433
kasan_report+0xb1/0x1e0 mm/kasan/report.c:495
tcp_or_dccp_get_hashinfo include/net/inet_hashtables.h:181 [inline]
reqsk_queue_unlink+0x320/0x350 net/ipv4/inet_connection_sock.c:913
inet_csk_reqsk_queue_drop net/ipv4/inet_connection_sock.c:927 [inline]
inet_csk_reqsk_queue_drop_and_put net/ipv4/inet_connection_sock.c:939 [inline]
reqsk_timer_handler+0x724/0x1160 net/ipv4/inet_connection_sock.c:1053
call_timer_fn+0x1a0/0x6b0 kernel/time/timer.c:1474
expire_timers kernel/time/timer.c:1519 [inline]
__run_timers.part.0+0x674/0xa80 kernel/time/timer.c:1790
__run_timers kernel/time/timer.c:1768 [inline]
run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1803
__do_softirq+0x1d0/0x9c8 kernel/softirq.c:571
invoke_softirq kernel/softirq.c:445 [inline]
__irq_exit_rcu+0x123/0x180 kernel/softirq.c:650
irq_exit_rcu+0x5/0x20 kernel/softirq.c:662
sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1107
</IRQ>

Fixes: d1e5e640 ("tcp: Introduce optional per-netns ehash.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221012145036.74960-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pantelis has not been active in recent years so no need to maintain
a separate entry for device tree overlays.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20221012220548.4163865-1-frowand.list@gmail.comSigned-off-by: Rob Herring <robh@kernel.org>

Zhu Lingshan has been writing and reviewing ifcvf patches for
a while now, add as reviewer.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Zhu Lingshan <lingshan.zhu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>

commit 71491c54 ("virtio_pci: don't try to use intxif pin is zero")
breaks virtio_pci on powerpc, when running as a qemu guest.

vp_find_vqs() bails out because pci_dev->pin == 0.

But pci_dev->irq is populated correctly, so vp_find_vqs_intx() would
succeed if we called it - which is what the code used to do.

This seems to happen because pci_dev->pin is not populated in
pci_assign_irq(). A PCI core bug? Maybe.

However Linus said:
	I really think that that is basically the only time you should use
	that 'pci_dev->pin' thing: it basically exists not for "does this
	device have an IRQ", but for "what is the routing of this irq on this
	device".

and
	The correct way to check for "no irq" doesn't use NO_IRQ at all, it just does
		if (dev->irq) ...

so let's just check irq and be done with it.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Fixes: 71491c54 ("virtio_pci: don't try to use intxif pin is zero")
Cc: "Angus Chen" <angus.chen@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221012220312.308522-1-mst@redhat.com>

Johannes Berg says:

====================
More wireless fixes for 6.1

This has only the fixes for the scan parsing issues.

* tag 'wireless-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: cfg80211: update hidden BSSes to avoid WARN_ON
  wifi: mac80211: fix crash in beacon protection for P2P-device
  wifi: mac80211_hwsim: avoid mac80211 warning on bad rate
  wifi: cfg80211: avoid nontransmitted BSS list corruption
  wifi: cfg80211: fix BSS refcounting bugs
  wifi: cfg80211: ensure length byte is present before access
  wifi: mac80211: fix MBSSID parsing use-after-free
  wifi: cfg80211/mac80211: reject bad MBSSID elements
  wifi: cfg80211: fix u8 overflow in cfg80211_update_notlisted_nontrans()
====================

Link: https://lore.kernel.org/r/20221013100522.46346-1-johannes@sipsolutions.netSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Pull in the fixes for various scan parsing bugs found by
Sönke Huster by fuzzing.

FIELD_GET() must only be used with a mask that is a compile-time
constant. Mark the functions as __always_inline to avoid the problem.

Fixes: 21b688da ("net: phy: micrel: Cable Diag feature for lan8814 phy")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Divya Koppera <Divya.Koppera@microchip.com>
Link: https://lore.kernel.org/r/20221011095437.12580-1-Divya.Koppera@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A WARN_ON call trace would be triggered when 'ct(commit, alg=helper)'
applies on a confirmed connection:

  WARNING: CPU: 0 PID: 1251 at net/netfilter/nf_conntrack_extend.c:98
  RIP: 0010:nf_ct_ext_add+0x12d/0x150 [nf_conntrack]
  Call Trace:
   <TASK>
   nf_ct_helper_ext_add+0x12/0x60 [nf_conntrack]
   __nf_ct_try_assign_helper+0xc4/0x160 [nf_conntrack]
   __ovs_ct_lookup+0x72e/0x780 [openvswitch]
   ovs_ct_execute+0x1d8/0x920 [openvswitch]
   do_execute_actions+0x4e6/0xb60 [openvswitch]
   ovs_execute_actions+0x60/0x140 [openvswitch]
   ovs_packet_cmd_execute+0x2ad/0x310 [openvswitch]
   genl_family_rcv_msg_doit.isra.15+0x113/0x150
   genl_rcv_msg+0xef/0x1f0

which can be reproduced with these OVS flows:

  table=0, in_port=veth1,tcp,tcp_dst=2121,ct_state=-trk
  actions=ct(commit, table=1)
  table=1, in_port=veth1,tcp,tcp_dst=2121,ct_state=+trk+new
  actions=ct(commit, alg=ftp),normal

The issue was introduced by commit 248d45f1 ("openvswitch: Allow
attaching helper in later commit") where it somehow removed the check
of nf_ct_is_confirmed before asigning the helper. This patch is to fix
it by bringing it back.

Fixes: 248d45f1 ("openvswitch: Allow attaching helper in later commit")
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Tested-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/c5c9092a22a2194650222bffaf786902613deb16.1665085502.git.lucien.xin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Kuniyuki Iwashima says:

====================
tcp/udp: Fix memory leaks and data races around IPV6_ADDRFORM.

This series fixes some memory leaks and data races caused in the
same scenario where one thread converts an IPv6 socket into IPv4
with IPV6_ADDRFORM and another accesses the socket concurrently.

  v4: https://lore.kernel.org/netdev/20221004171802.40968-1-kuniyu@amazon.com/
  v3 (Resend): https://lore.kernel.org/netdev/20221003154425.49458-1-kuniyu@amazon.com/
  v3: https://lore.kernel.org/netdev/20220929012542.55424-1-kuniyu@amazon.com/
  v2: https://lore.kernel.org/netdev/20220928002741.64237-1-kuniyu@amazon.com/
  v1: https://lore.kernel.org/netdev/20220927161209.32939-1-kuniyu@amazon.com/
====================

Link: https://lore.kernel.org/r/20221006185349.74777-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

setsockopt(IPV6_ADDRFORM) and tcp_v6_connect() change icsk->icsk_af_ops
under lock_sock(), but tcp_(get|set)sockopt() read it locklessly.  To
avoid load/store tearing, we need to add READ_ONCE() and WRITE_ONCE()
for the reads and writes.

Thanks to Eric Dumazet for providing the syzbot report:

BUG: KCSAN: data-race in tcp_setsockopt / tcp_v6_connect

write to 0xffff88813c624518 of 8 bytes by task 23936 on cpu 0:
tcp_v6_connect+0x5b3/0xce0 net/ipv6/tcp_ipv6.c:240
__inet_stream_connect+0x159/0x6d0 net/ipv4/af_inet.c:660
inet_stream_connect+0x44/0x70 net/ipv4/af_inet.c:724
__sys_connect_file net/socket.c:1976 [inline]
__sys_connect+0x197/0x1b0 net/socket.c:1993
__do_sys_connect net/socket.c:2003 [inline]
__se_sys_connect net/socket.c:2000 [inline]
__x64_sys_connect+0x3d/0x50 net/socket.c:2000
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read to 0xffff88813c624518 of 8 bytes by task 23937 on cpu 1:
tcp_setsockopt+0x147/0x1c80 net/ipv4/tcp.c:3789
sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3585
__sys_setsockopt+0x212/0x2b0 net/socket.c:2252
__do_sys_setsockopt net/socket.c:2263 [inline]
__se_sys_setsockopt net/socket.c:2260 [inline]
__x64_sys_setsockopt+0x62/0x70 net/socket.c:2260
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0xffffffff8539af68 -> 0xffffffff8539aff8

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 23937 Comm: syz-executor.5 Not tainted
6.0.0-rc4-syzkaller-00331-g4ed9c1e9-dirty #0

Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 08/26/2022

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 086d4905 ("ipv6: annotate some data-races around sk->sk_prot")
fixed some data-races around sk->sk_prot but it was not enough.

Some functions in inet6_(stream|dgram)_ops still access sk->sk_prot
without lock_sock() or rtnl_lock(), so they need READ_ONCE() to avoid
load tearing.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Originally, inet6_sk(sk)->XXX were changed under lock_sock(), so we were
able to clean them up by calling inet6_destroy_sock() during the IPv6 ->
IPv4 conversion by IPV6_ADDRFORM.  However, commit 03485f2a ("udpv6:
Add lockless sendmsg() support") added a lockless memory allocation path,
which could cause a memory leak:

setsockopt(IPV6_ADDRFORM)                 sendmsg()
+-----------------------+                 +-------+
- do_ipv6_setsockopt(sk, ...)             - udpv6_sendmsg(sk, ...)
  - sockopt_lock_sock(sk)                   ^._ called via udpv6_prot
    - lock_sock(sk)                             before WRITE_ONCE()
  - WRITE_ONCE(sk->sk_prot, &tcp_prot)
  - inet6_destroy_sock()                    - if (!corkreq)
  - sockopt_release_sock(sk)                  - ip6_make_skb(sk, ...)
    - release_sock(sk)                          ^._ lockless fast path for
                                                    the non-corking case

                                                - __ip6_append_data(sk, ...)
                                                  - ipv6_local_rxpmtu(sk, ...)
                                                    - xchg(&np->rxpmtu, skb)
                                                      ^._ rxpmtu is never freed.

                                                - goto out_no_dst;

                                            - lock_sock(sk)

For now, rxpmtu is only the case, but not to miss the future change
and a similar bug fixed in commit e2732600 ("net: ping6: Fix
memleak in ipv6_renew_options()."), let's set a new function to IPv6
sk->sk_destruct() and call inet6_cleanup_sock() there.  Since the
conversion does not change sk->sk_destruct(), we can guarantee that
we can clean up IPv6 resources finally.

We can now remove all inet6_destroy_sock() calls from IPv6 protocol
specific ->destroy() functions, but such changes are invasive to
backport.  So they can be posted as a follow-up later for net-next.

Fixes: 03485f2a ("udpv6: Add lockless sendmsg() support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>