- 28 Feb, 2011 4 commits
-
-
Adrian Knoth authored
Don't continue if we cannot detect the real card type, otherwise, all subsequent functions, especially strcpy(), would fail, leaving the whole driver in an unusable state. Without such a protection, dmesg would look like this: Pid: 1525, comm: modprobe Not tainted 2.6.38-rc6 #1 MSI MS-7250/MS-7250 EIP: 0060:[<c114e700>] EFLAGS: 00010296 CPU: 1 EIP is at strcpy+0x10/0x30 EAX: f4d33e58 EBX: f5990800 ECX: f4d33e58 EDX: 00000000 ESI: 00000000 EDI: f4d33e58 EBP: f5990930 ESP: f3dd3e0c DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 f53d4204 00000000 f90bfc03 00000001 00000001 f3dd3e64 c10fedff f3dd3e7c f3d854e4 f53d4000 c10307b8 00000001 c10307b8 f5990860 c10307b8 00000001 c10332e5 f59908bc c12f4339 f59908bc f5990860 c11ef207 f4d33e00 f53d4000 [<f90bfc03>] ? snd_hdspm_probe+0x7e7/0x1166 [snd_hdspm] [<c10fedff>] ? __sysfs_add_one+0x1f/0xf0 [<c10307b8>] ? get_parent_ip+0x8/0x20 [<c10307b8>] ? get_parent_ip+0x8/0x20 [<c10307b8>] ? get_parent_ip+0x8/0x20 [<c10332e5>] ? add_preempt_count+0xa5/0xd0 [<c12f4339>] ? _raw_spin_lock_irqsave+0x19/0x40 [<c11ef207>] ? pm_runtime_enable+0x17/0x80 [<c1160172>] ? local_pci_probe+0x42/0xb0 [<c1161091>] ? pci_device_probe+0x61/0x80 [<c11e9587>] ? driver_probe_device+0x77/0x180 [<c11600f0>] ? pci_match_device+0xa0/0xc0 [<c11e9709>] ? __driver_attach+0x79/0x80 [<c11e9690>] ? __driver_attach+0x0/0x80 [<c11e8e32>] ? bus_for_each_dev+0x52/0x80 [<c11e9416>] ? driver_attach+0x16/0x20 [<c11e9690>] ? __driver_attach+0x0/0x80 [<c11e8771>] ? bus_add_driver+0xa1/0x220 [<c1160f20>] ? pci_device_remove+0x0/0xf0 [<c11e99a3>] ? driver_register+0x63/0x120 [<c11612bd>] ? __pci_register_driver+0x3d/0xb0 [<c1001132>] ? do_one_initcall+0x32/0x160 [<f90d6000>] ? alsa_card_hdspm_init+0x0/0x14 [snd_hdspm] [<c10676a9>] ? sys_init_module+0x99/0x1e0 [<c10ade3d>] ? sys_close+0x6d/0xc0 [<c1002c90>] ? sysenter_do_call+0x12/0x26 ---[ end trace 239f0661c558378b ]--- Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Adrian Knoth authored
In contrast to the PCIe version (RME AES), the PCI version (RME AES32) has a different firmware revision. This patch adds the missing PCI revision. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Adrian Knoth authored
Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Risto Suominen authored
Allow input from microphone on remaining PowerBooks and iBooks with Tumbler. Tested only with PowerBook G4 Gigabit Ethernet (PowerBook3,3). [Fixed to use of_machine_is_compatible by tiwai] Signed-off-by: Risto Suominen <Risto.Suominen@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 27 Feb, 2011 1 commit
-
-
Justin P. Mattock authored
The Patch below removes one to many "n's" in a word.. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 25 Feb, 2011 2 commits
-
-
Justin P. Mattock authored
The patch below removes an extra "l" in the word. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Justin P. Mattock authored
The patch below removes an extra "l" in the word. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 23 Feb, 2011 8 commits
-
-
Adrian Knoth authored
Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Adrian Knoth authored
Original patch by Dan Rosenberg <drosenberg@vsecurity.com> under commit e68d3b31. I'm copying his text here: The SNDRV_HDSPM_IOCTL_GET_CONFIG_INFO ioctl in hdspm.c allow unprivileged users to read uninitialized kernel stack memory, because several fields of the hdspm_config struct declared on the stack are not altered or zeroed before being copied back to the user. This patch takes care of it. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Adrian Knoth authored
Fredrik Lingvall <fredrik.lingvall@gmail.com> has discovered wrong frequency and sync detection on AES32. According to him, the provided patch fixes these issues. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Adrian Knoth authored
In contrast to the RME MADI card, coax/optical selection on the MADIface is done via a physical switch located at the breakout box. Obviously, the driver cannot switch ports in software. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Adrian Knoth authored
Caused by two typos, no output channel mappings were assigned for MADI/MADIface at double/quad speed. The channel mapping is indeed identical to the single speed mapping, the cards will simply use the first N channels. Signed-off-by: Florian Faber <faber@faberman.de> Signed-off-by: Fredrik Lingvall <fredrik.lingvall@gmail.com> Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Adrian Knoth authored
Without calling an appropriate rule, AES/AES32 cards would announce a theoretical channel count of 64 (HDSPM_MAX_CHANNELS), leading to the already known bug: [37422.640481] ------------[ cut here ]------------ [37422.640487] WARNING: at sound/pci/rme9652/hdspm.c:5449 snd_hdspm_ioctl+0x18f/0x202 [snd_hdspm]() [37422.640489] Hardware name: PRIMERGY RX100 S6 [37422.640490] BUG? (info->channel >= hdspm->max_channels_in) [37422.640492] Modules linked in: snd_hdspm snd_seq_midi ipmi_watchdog ipmi_poweroff ipmi_si ipmi_devintf ipmi_msghandler i2c_i801 e1000e snd_rawmidi power_meter [last unloaded: snd_hdspm] [37422.640501] Pid: 22231, comm: jackd Tainted: G D W 2.6.36-gentoo-r5 #5 [37422.640502] Call Trace: [37422.640508] [<ffffffff8103db3a>] warn_slowpath_common+0x80/0x98 [37422.640511] [<ffffffff8103dbe6>] warn_slowpath_fmt+0x41/0x43 [37422.640514] [<ffffffff81034306>] ? get_parent_ip+0x11/0x42 [37422.640518] [<ffffffffa0055763>] snd_hdspm_ioctl+0x18f/0x202 [snd_hdspm] [37422.640522] [<ffffffff813fd626>] snd_pcm_channel_info+0x73/0x7c [37422.640525] [<ffffffff814001e9>] snd_pcm_common_ioctl1+0x326/0xb01 [37422.640527] [<ffffffff81034306>] ? get_parent_ip+0x11/0x42 [37422.640531] [<ffffffff8105be6c>] ? __srcu_read_unlock+0x3b/0x59 [37422.640533] [<ffffffff81400bce>] snd_pcm_capture_ioctl1+0x20a/0x227 [37422.640537] [<ffffffff811e599c>] ? file_has_perm+0x90/0x9e [37422.640540] [<ffffffff81400c15>] snd_pcm_capture_ioctl+0x2a/0x2e [37422.640543] [<ffffffff810f2c69>] do_vfs_ioctl+0x404/0x453 [37422.640546] [<ffffffff810f2d09>] sys_ioctl+0x51/0x74 [37422.640549] [<ffffffff81002aab>] system_call_fastpath+0x16/0x1b [37422.640552] ---[ end trace 0cd919cd68118082 ]--- We already have all the right values in place, we simply have to inform the upper layers about this restriction. Note that snd_hdspm_hw_rule_rate_out_channels and snd_hdspm_hw_rule_rate_in_channels must not be called on AES32, because the channel count is always 16, no matter of the samplerate in use. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Adrian Knoth authored
Only RayDAT and AIO provide sane buffer pointers that can be used with HDSPM_BufferPositionMask, on all other cards, this would result in a wrong HW pointer leading to xruns and these messages: [260808.916788] BUG: pcmC0D0p:0, pos = 2976, buffer size = 1024, period size = 512 [260808.961124] BUG: pcmC0D0c:0, pos = 4944, buffer size = 1024, period size = 512 Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Adrian Knoth authored
On RME AES and AES(32), none of the required information (max_channels_in, max_channels_out, channel mappings, port names) was set, leading to the BUG below. This patch adds the missing bits, thus fixing the bug. 125.058768] ------------[ cut here ]------------ [ 125.058773] WARNING: at sound/pci/rme9652/hdspm.c:5389 snd_hdspm_ioctl+0x10c/0x1d8 [snd_hdspm]() [ 125.058775] Hardware name: PRIMERGY RX100 S6 [ 125.058777] BUG? (info->channel >= hdspm->max_channels_out) [ 125.058778] Modules linked in: ipmi_watchdog ipmi_poweroff ipmi_si ipmi_devintf ipmi_msghandler snd_hdspm power_meter e1000e snd_rawmidi i2c_i801 [ 125.058787] Pid: 3652, comm: audacity Tainted: G W 2.6.36-gentoo-r5 #5 [ 125.058788] Call Trace: [ 125.058792] [<ffffffff8103db3a>] warn_slowpath_common+0x80/0x98 [ 125.058796] [<ffffffff8103dbe6>] warn_slowpath_fmt+0x41/0x43 [ 125.058800] [<ffffffffa006761a>] snd_hdspm_ioctl+0x10c/0x1d8 [snd_hdspm] [ 125.058803] [<ffffffff813fd626>] snd_pcm_channel_info+0x73/0x7c [ 125.058806] [<ffffffff814001e9>] snd_pcm_common_ioctl1+0x326/0xb01 [ 125.058809] [<ffffffff810c604c>] ? __do_fault+0x361/0x3a6 [ 125.058812] [<ffffffff81400e23>] snd_pcm_playback_ioctl1+0x20a/0x227 [ 125.058815] [<ffffffff811e599c>] ? file_has_perm+0x90/0x9e [ 125.058818] [<ffffffff81400e6a>] snd_pcm_playback_ioctl+0x2a/0x2e [ 125.058821] [<ffffffff810f2c69>] do_vfs_ioctl+0x404/0x453 [ 125.058824] [<ffffffff810f2d09>] sys_ioctl+0x51/0x74 [ 125.058827] [<ffffffff81002aab>] system_call_fastpath+0x16/0x1b [ 125.058830] ---[ end trace 5bddb08e5d4cbeb1 ]--- Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Florian Faber <faber@faberman.de> Signed-off-by: Fredrik Lingvall <fredrik.lingvall@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 20 Feb, 2011 1 commit
-
-
Raymond Yau authored
Add " Playback Volume" to 10 bands Equalizer Controls of au88x0 so that alsa-lib won't regard them as "Capture Volume". Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 19 Feb, 2011 2 commits
-
-
Andreas Mohr authored
Make newly created AC97 emulation of azt3328 known to the AC97 layer side. - relocate common functions to the top (due to definition after use) - rename control names - adjust 3D settings to the card's custom layout of this register Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Andreas Mohr authored
Make use of the very flexible ALSA ac97 layer (hooks for custom I/O!) on this weird AC97 copycat hardware, via semi-extended I/O translation/emulation. Some 5kB binary/loaded size saved (well... additional huge AC97 module penalty not factored in, of course ;-P). Given that the driver previously had 20kB that's not bad, but the much more important thing is to have AC97 layer stress-tested with a thoroughly weird AC97 copycat (or, simply put, if it were not for this AC97 test aspect, this effort would merely have been a nut job ;). Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 17 Feb, 2011 1 commit
-
-
Andreas Mohr authored
Use AC97 macros (sometimes already existing, or newly added) instead of error-prone repetition of open-coded values. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 14 Feb, 2011 4 commits
-
-
Daniel Mack authored
The number of cases has increased so use switch-case rather than if-statements. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Daniel Mack authored
The MK2 generation of Native Instruments' sound cards are in fact compliant to the USB audio standard of version 2 and other approved USB standards. However, they come up as vendor-specific device when first connected but can be told to come up with a new set of descriptors upon their next enumeration. The interfaces announced by the new descriptors will be handled by the kernel's class drivers. This is done by issuing a vendor specific device request and sending the device to reset. There are also some vendor-specific USB requests for some mixer elements that can't be exported in a standard compliant way. The driver now supports them with quirks handling mechanisms. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Daniel Mack authored
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Clemens Ladisch authored
Change the core code where sparse complains. In most cases, this means just adding annotations to confirm that we indeed want to do the dirty things we're doing. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 10 Feb, 2011 17 commits
-
-
Eliot Blennerhassett authored
Firmware version check depends on hpi version. Update so correct firmware is accepted. Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eliot Blennerhassett authored
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eliot Blennerhassett authored
Difference in major.minor between driver and firmware is an error now. Release version mismatch give a warning. Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eliot Blennerhassett authored
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eliot Blennerhassett authored
HPI version 4.05.32 Tweak HPI error code for backward compatibility. Add BUILD to build-related defines. Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eliot Blennerhassett authored
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eliot Blennerhassett authored
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eliot Blennerhassett authored
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eliot Blennerhassett authored
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eliot Blennerhassett authored
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eliot Blennerhassett authored
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eliot Blennerhassett authored
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eliot Blennerhassett authored
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eliot Blennerhassett authored
Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eliot Blennerhassett authored
Interrupt flag used for message handshake will be required for stream interrupts, so conditionally compiled code without HPI6205_NO_HSR_POLL defined can never be used; removing it. Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eliot Blennerhassett authored
Remove unused function. Simplify hpi_alloc_control_cache. Remove useless assignment to struct subsequently freed. Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Eliot Blennerhassett authored
Create and use HPI_ERROR_DSP_COMMUNICATION _DSP_BOOTLOAD, rather than backend-specific error codes (now returned as data with the error). Signed-off-by: Eliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-