- 19 Jun, 2020 24 commits
-
-
Eric Dumazet authored
skb argument of tso_count_descs(), tso_build_hdr() and tso_build_data() can be const. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
size field can be an int, no need for size_t Removes a 32bit hole on 64bit kernels. And align fields for better readability. Signed-off-by:
-
Eric Dumazet authored
Transport header size could be 60 bytes, and network header size can also be 60 bytes. Add the Ethernet header and we are above 128 bytes. Since drivers using net/core/tso.c usually allocates one DMA coherent piece of memory per TX queue, this patch might cause issues if a driver was using too many slots. For 1024 slots, we would need 256 KB of physically contiguous memory instead of 128 KB. Alternative fix would be to add checks in the fast path, but this involves more work in all drivers using net/core/tso.c. Fixes: f9cbe9a5 ("net: define the TSO header size in net/tso.h") Signed-off-by:
-
Eric Dumazet authored
We need to increase TSO_HEADER_SIZE from 128 to 256. Since otx2_sq_init() calls qmem_alloc() with TSO_HEADER_SIZE, we need to change (struct qmem)->entry_sz to avoid truncation to 0. Fixes: 7a37245e ("octeontx2-af: NPA block admin queue init") Signed-off-by:
-
David S. Miller authored
Barry Song says: ==================== net: hns3: a bundle of minor cleanup and fixes some minor changes to either improve the readability or make the code align with linux APIs better. ==================== Signed-off-by: -
Barry Song authored
Right now they are empty functions for our SoC since hardware can keep cache coherent, but it is still good to align with streaming DMA APIs as device drivers should not make an assumption of SoC. Reviewed-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
Barry Song <song.bao.hua@hisilicon.com> Signed-off-by:
-
Barry Song authored
disable_irq() after request_irq() is still risk as there is a chance irq can come after request_irq() and before disable_irq(). this should be done by IRQ_NOAUTOEN flag. Signed-off-by:
-
Barry Song authored
This is for improving the readability. Signed-off-by:
-
Barry Song authored
Move the type of buffer address from unsigned char to void Signed-off-by:
-
Barry Song authored
since we are using device-managed function, it is unnecessary to free in probe. Signed-off-by:
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. This code was detected with the help of Coccinelle and, audited and fixed manually. Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Tim Harvey authored
If a valid mac address is present in dt, use that before using CSR's or a random mac address. Signed-off-by:
Tim Harvey <tharvey@gateworks.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Heiner Kallweit says: ==================== r8169: smaller improvements again Series includes a number of different smaller improvements. ==================== Signed-off-by: -
Heiner Kallweit authored
So far we can not configure irq coalescing when link is down. Allow the user to do this, and assume that he wants to configure irq coalescing for highest speed. Otherwise the irq rate is low enough anyway. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
Relevant chip clocks are disabled in rtl_pll_power_down(), therefore move calling clk_disable_unprepare() there. Similar for enabling the clock. Signed-off-by:
-
Heiner Kallweit authored
Counters are updated whenever we go down, therefore move the call to rtl8169_down(). Signed-off-by:
-
Heiner Kallweit authored
rtl8169_hw_reset() meanwhile does more than a hw reset, therefore rename it to rtl8169_cleanup(). In addition move calling napi_disable() to this function. Signed-off-by:
-
Heiner Kallweit authored
rtl8169_hw_reset() may be called under RTNL lock, therefore switch to synchronize_net(). Signed-off-by:
-
Heiner Kallweit authored
In the following scenario WoL isn't configured properly: - Driver is loaded, interface isn't brought up within 10s, so driver runtime-suspends. - WoL is set. - Interface is brought up, stored WoL setting isn't applied. It has always been like that, but the scenario seems to be quite theoretical as I haven't seen any bug report yet. Therefore treat the change as an improvement. Signed-off-by:
-
Heiner Kallweit authored
Since 9d3679fe ("r8169: inline rtl8169_make_unusable_by_asic") this constant isn't used any longer, so remove it. Signed-off-by:
-
Heiner Kallweit authored
In case of problems it facilitates the bug analysis if we know whether DASH is active. Therefore emit a message in probe if this is the case. Signed-off-by:
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. This code was detected with the help of Coccinelle and, audited and fixed manually. Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
-
Eric Dumazet authored
Whenever a buggy NAPI driver returns more than its budget, we emit a stack trace that is of no use, since it does not tell which driver is buggy. Instead, emit a message giving the function name, and a descriptive message. Signed-off-by:
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. This code was detected with the help of Coccinelle and, audited and fixed manually. Signed-off-by:
-
- 17 Jun, 2020 8 commits
-
-
Gustavo A. R. Silva authored
Use array_size() helper instead of the open-coded version in copy_to_user(). These sorts of multiplication factors need to be wrapped in array_size(). This issue was found with the help of Coccinelle and, audited and fixed manually. Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83Signed-off-by:
-
Gustavo A. R. Silva authored
Use vzalloc/vzalloc_node instead of the vmalloc/vzalloc_node and memset. Also, notice that vzalloc_node() function has no 2-factor argument form to calculate the size for the allocation, so multiplication factors need to be wrapped in array_size(). This issue was found with the help of Coccinelle and, audited and fixed manually. Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83Signed-off-by:
-
Hoang Huu Le authored
Currently, updating binding table (add service binding to name table/withdraw a service binding) is being sent over replicast. However, if we are scaling up clusters to > 100 nodes/containers this method is less affection because of looping through nodes in a cluster one by one. It is worth to use broadcast to update a binding service. This way, the binding table can be updated on all peer nodes in one shot. Broadcast is used when all peer nodes, as indicated by a new capability flag TIPC_NAMED_BCAST, support reception of this message type. Four problems need to be considered when introducing this feature. 1) When establishing a link to a new peer node we still update this by a unicast 'bulk' update. This may lead to race conditions, where a later broadcast publication/withdrawal bypass the 'bulk', resulting in disordered publications, or even that a withdrawal may arrive before the corresponding publication. We solve this by adding an 'is_last_bulk' bit in the last bulk messages so that it can be distinguished from all other messages. Only when this message has arrived do we open up for reception of broadcast publications/withdrawals. 2) When a first legacy node is added to the cluster all distribution will switch over to use the legacy 'replicast' method, while the opposite happens when the last legacy node leaves the cluster. This entails another risk of message disordering that has to be handled. We solve this by adding a sequence number to the broadcast/replicast messages, so that disordering can be discovered and corrected. Note however that we don't need to consider potential message loss or duplication at this protocol level. 3) Bulk messages don't contain any sequence numbers, and will always arrive in order. Hence we must exempt those from the sequence number control and deliver them unconditionally. We solve this by adding a new 'is_bulk' bit in those messages so that they can be recognized. 4) Legacy messages, which don't contain any new bits or sequence numbers, but neither can arrive out of order, also need to be exempt from the initial synchronization and sequence number check, and delivered unconditionally. Therefore, we add another 'is_not_legacy' bit to all new messages so that those can be distinguished from legacy messages and the latter delivered directly. v1->v2: - fix warning issue reported by kbuild test robot <lkp@intel.com> - add santiy check to drop the publication message with a sequence number that is lower than the agreed synch point Signed-off-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Hoang Huu Le <hoang.h.le@dektech.com.au> Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Don't get per-cpu pointer with preemption enabled in nft_set_pipapo, fix from Stefano Brivio. 2) Fix memory leak in ctnetlink, from Pablo Neira Ayuso. 3) Multiple definitions of MPTCP_PM_MAX_ADDR, from Geliang Tang. 4) Accidently disabling NAPI in non-error paths of macb_open(), from Charles Keepax. 5) Fix races between alx_stop and alx_remove, from Zekun Shen. 6) We forget to re-enable SRIOV during resume in bnxt_en driver, from Michael Chan. 7) Fix memory leak in ipv6_mc_destroy_dev(), from Wang Hai. 8) rxtx stats use wrong index in mvpp2 driver, from Sven Auhagen. 9) Fix memory leak in mptcp_subflow_create_socket error path, from Wei Yongjun. 10) We should not adjust the TCP window advertised when sending dup acks in non-SACK mode, because it won't be counted as a dup by the sender if the window size changes. From Eric Dumazet. 11) Destroy the right number of queues during remove in mvpp2 driver, from Sven Auhagen. 12) Various WOL and PM fixes to e1000 driver, from Chen Yu, Vaibhav Gupta, and Arnd Bergmann. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits) e1000e: fix unused-function warning e1000: use generic power management e1000e: Do not wake up the system via WOL if device wakeup is disabled lan743x: add MODULE_DEVICE_TABLE for module loading alias mlxsw: spectrum: Adjust headroom buffers for 8x ports bareudp: Fixed configuration to avoid having garbage values mvpp2: remove module bugfix tcp: grow window for OOO packets only for SACK flows mptcp: fix memory leak in mptcp_subflow_create_socket() netfilter: flowtable: Make nf_flow_table_offload_add/del_cb inline net/sched: act_ct: Make tcf_ct_flow_table_restore_skb inline net: dsa: sja1105: fix PTP timestamping with large tc-taprio cycles mvpp2: ethtool rxtx stats fix MAINTAINERS: switch to my private email for Renesas Ethernet drivers rocker: fix incorrect error handling in dma_rings_init test_objagg: Fix potential memory leak in error handling net: ethernet: mtk-star-emac: simplify interrupt handling mld: fix memory leak in ipv6_mc_destroy_dev() bnxt_en: Return from timer if interface is not in open state. bnxt_en: Fix AER reset logic on 57500 chips. ... -
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsLinus Torvalds authored
Pull AFS fixes from David Howells: "I've managed to get xfstests kind of working with afs. Here are a set of patches that fix most of the bugs found. There are a number of primary issues: - Incorrect handling of mtime and non-handling of ctime. It might be argued, that the latter isn't a bug since the AFS protocol doesn't support ctime, but I should probably still update it locally. - Shared-write mmap, truncate and writeback bugs. This includes not changing i_size under the callback lock, overwriting local i_size with the reply from the server after a partial writeback, not limiting the writeback from an mmapped page to EOF. - Checks for an abort code indicating that the primary vnode in an operation was deleted by a third-party are done in the wrong place. - Silly rename bugs. This includes an incomplete conversion to the new operation handling, duplicate nlink handling, nlink changing not being done inside the callback lock and insufficient handling of third-party conflicting directory changes. And some secondary ones: - The UAEOVERFLOW abort code should map to EOVERFLOW not EREMOTEIO. - Remove a couple of unused or incompletely used bits. - Remove a couple of redundant success checks. These seem to fix all the data-corruption bugs found by ./check -afs -g quick along with the obvious silly rename bugs and time bugs. There are still some test failures, but they seem to fall into two classes: firstly, the authentication/security model is different to the standard UNIX model and permission is arbitrated by the server and cached locally; and secondly, there are a number of features that AFS does not support (such as mknod). But in these cases, the tests themselves need to be adapted or skipped. Using the in-kernel afs client with xfstests also found a bug in the AuriStor AFS server that has been fixed for a future release" * tag 'afs-fixes-20200616' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Fix silly rename afs: afs_vnode_commit_status() doesn't need to check the RPC error afs: Fix use of afs_check_for_remote_deletion() afs: Remove afs_operation::abort_code afs: Fix yfs_fs_fetch_status() to honour vnode selector afs: Remove yfs_fs_fetch_file_status() as it's not used afs: Fix the mapping of the UAEOVERFLOW abort code afs: Fix truncation issues and mmap writeback size afs: Concoct ctimes afs: Fix EOF corruption afs: afs_write_end() should change i_size under the right lock afs: Fix non-setting of mtime when writing into mmap -
Randy Dunlap authored
Remove SH-5 documentation index entries following the removal of SH-5 source code. Error: Cannot open file ../arch/sh/mm/tlb-sh5.c Error: Cannot open file ../arch/sh/mm/tlb-sh5.c Error: Cannot open file ../arch/sh/include/asm/tlb_64.h Error: Cannot open file ../arch/sh/include/asm/tlb_64.h Fixes: 3b69e8b4 ("Merge tag 'sh-for-5.8' of git://git.libc.org/linux-sh") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Cc: Rich Felker <dalias@libc.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: ysato@users.sourceforge.jp Cc: linux-sh@vger.kernel.org Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge tag 'flex-array-conversions-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull flexible-array member conversions from Gustavo A. R. Silva: "Replace zero-length arrays with flexible-array members. Notice that all of these patches have been baking in linux-next for two development cycles now. There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. C99 introduced “flexible array members”, which lacks a numeric size for the array declaration entirely: struct something { size_t count; struct foo items[]; }; This is the way the kernel expects dynamically sized trailing elements to be declared. It allows the compiler to generate errors when the flexible array does not occur last in the structure, which helps to prevent some kind of undefined behavior[3] bugs from being inadvertently introduced to the codebase. It also allows the compiler to correctly analyze array sizes (via sizeof(), CONFIG_FORTIFY_SOURCE, and CONFIG_UBSAN_BOUNDS). For instance, there is no mechanism that warns us that the following application of the sizeof() operator to a zero-length array always results in zero: struct something { size_t count; struct foo items[0]; }; struct something *instance; instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL); instance->count = count; size = sizeof(instance->items) * instance->count; memcpy(instance->items, source, size); At the last line of code above, size turns out to be zero, when one might have thought it represents the total size in bytes of the dynamic memory recently allocated for the trailing array items. Here are a couple examples of this issue[4][5]. Instead, flexible array members have incomplete type, and so the sizeof() operator may not be applied[6], so any misuse of such operators will be immediately noticed at build time. The cleanest and least error-prone way to implement this is through the use of a flexible array member: struct something { size_t count; struct foo items[]; }; struct something *instance; instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL); instance->count = count; size = sizeof(instance->items[0]) * instance->count; memcpy(instance->items, source, size); instead" [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") [4] commit f2cd32a4 ("rndis_wlan: Remove logically dead code") [5] commit ab91c2a8 ("tpm: eventlog: Replace zero-length array with flexible-array member") [6] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html * tag 'flex-array-conversions-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (41 commits) w1: Replace zero-length array with flexible-array tracing/probe: Replace zero-length array with flexible-array soc: ti: Replace zero-length array with flexible-array tifm: Replace zero-length array with flexible-array dmaengine: tegra-apb: Replace zero-length array with flexible-array stm class: Replace zero-length array with flexible-array Squashfs: Replace zero-length array with flexible-array ASoC: SOF: Replace zero-length array with flexible-array ima: Replace zero-length array with flexible-array sctp: Replace zero-length array with flexible-array phy: samsung: Replace zero-length array with flexible-array RxRPC: Replace zero-length array with flexible-array rapidio: Replace zero-length array with flexible-array media: pwc: Replace zero-length array with flexible-array firmware: pcdp: Replace zero-length array with flexible-array oprofile: Replace zero-length array with flexible-array block: Replace zero-length array with flexible-array tools/testing/nvdimm: Replace zero-length array with flexible-array libata: Replace zero-length array with flexible-array kprobes: Replace zero-length array with flexible-array ...
-
Arvind Sankar authored
The purgatory Makefile removes -fstack-protector options if they were configured in, but does not currently add -fno-stack-protector. If gcc was configured with the --enable-default-ssp configure option, this results in the stack protector still being enabled for the purgatory (absent distro-specific specs files that might disable it again for freestanding compilations), if the main kernel is being compiled with stack protection enabled (if it's disabled for the main kernel, the top-level Makefile will add -fno-stack-protector). This will break the build since commit e4160b2e ("x86/purgatory: Fail the build if purgatory.ro has missing symbols") and prior to that would have caused runtime failure when trying to use kexec. Explicitly add -fno-stack-protector to avoid this, as done in other Makefiles that need to disable the stack protector. Reported-by:
Gabriel C <nix.or.die@googlemail.com> Signed-off-by:
Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by:
-
- 16 Jun, 2020 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2020-06-16 This series contains fixes to e1000 and e1000e. Chen fixes an e1000e issue where systems could be waken via WoL, even though the user has disabled the wakeup bit via sysfs. Vaibhav Gupta updates the e1000 driver to clean up the legacy Power Management hooks. Arnd Bergmann cleans up the inconsistent use CONFIG_PM_SLEEP preprocessor tags, which also resolves the compiler warnings about the possibility of unused structure. ==================== Signed-off-by: -
Arnd Bergmann authored
The CONFIG_PM_SLEEP #ifdef checks in this file are inconsistent, leading to a warning about sometimes unused function: drivers/net/ethernet/intel/e1000e/netdev.c:137:13: error: unused function 'e1000e_check_me' [-Werror,-Wunused-function] Rather than adding more #ifdefs, just remove them completely and mark the PM functions as __maybe_unused to let the compiler work it out on it own. Fixes: e086ba2f ("e1000e: disable s0ix entry and exit flows for ME systems") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Vaibhav Gupta authored
With legacy PM hooks, it was the responsibility of a driver to manage PCI states and also the device's power state. The generic approach is to let PCI core handle the work. e1000_suspend() calls __e1000_shutdown() to perform intermediate tasks. __e1000_shutdown() modifies the value of "wake" (device should be wakeup enabled or not), responsible for controlling the flow of legacy PM. Since, PCI core has no idea about the value of "wake", new code for generic PM may produce unexpected results. Thus, use "device_set_wakeup_enable()" to wakeup-enable the device accordingly. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Tested-by:
-
Chen Yu authored
Currently the system will be woken up via WOL(Wake On LAN) even if the device wakeup ability has been disabled via sysfs: cat /sys/devices/pci0000:00/0000:00:1f.6/power/wakeup disabled The system should not be woken up if the user has explicitly disabled the wake up ability for this device. This patch clears the WOL ability of this network device if the user has disabled the wake up ability in sysfs. Fixes: bc7f75fa ("[E1000E]: New pci-express e1000 driver") Reported-by:
"Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Chen Yu <yu.c.chen@intel.com> Tested-by:
-
Tim Harvey authored
Without a MODULE_DEVICE_TABLE the attributes are missing that create an alias for auto-loading the module in userspace via hotplug. Signed-off-by:
-
David Howells authored
Fix AFS's silly rename by the following means: (1) Set the destination directory in afs_do_silly_rename() so as to avoid misbehaviour and indicate that the directory data version will increment by 1 so as to avoid warnings about unexpected changes in the DV. Also indicate that the ctime should be updated to avoid xfstest grumbling. (2) Note when the server indicates that a directory changed more than we expected (AFS_OPERATION_DIR_CONFLICT), indicating a conflict with a third party change, checking on successful completion of unlink and rename. The problem is that the FS.RemoveFile RPC op doesn't report the status of the unlinked file, though YFS.RemoveFile2 does. This can be mitigated by the assumption that if the directory DV cranked by exactly 1, we can be sure we removed one link from the file; further, ordinarily in AFS, files cannot be hardlinked across directories, so if we reduce nlink to 0, the file is deleted. However, if the directory DV jumps by more than 1, we cannot know if a third party intervened by adding or removing a link on the file we just removed a link from. The same also goes for any vnode that is at the destination of the FS.Rename RPC op. (3) Make afs_vnode_commit_status() apply the nlink drop inside the cb_lock section along with the other attribute updates if ->op_unlinked is set on the descriptor for the appropriate vnode. (4) Issue a follow up status fetch to the unlinked file in the event of a third party conflict that makes it impossible for us to know if we actually deleted the file or not. (5) Provide a flag, AFS_VNODE_SILLY_DELETED, to make afs_getattr() lie to the user about the nlink of a silly deleted file so that it appears as 0, not 1. Found with the generic/035 and generic/084 xfstests. Fixes: e49c7b2f ("afs: Build an abstraction around an "operation" concept") Reported-by:Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
David Howells <dhowells@redhat.com>
-
Ido Schimmel authored
The port's headroom buffers are used to store packets while they traverse the device's pipeline and also to store packets that are egress mirrored. On Spectrum-3, ports with eight lanes use two headroom buffers between which the configured headroom size is split. In order to prevent packet loss, multiply the calculated headroom size by two for 8x ports. Fixes: da382875 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Martin authored
Code to initialize the conf structure while gathering the configuration of the device was missing. Fixes: 571912c6 ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by:
Martin <martin.varghese@nokia.com> Signed-off-by:
-
