1. 24 Jan, 2020 14 commits
    • Meir Lichtinger's avatar
      net/mlx5: Update the list of the PCI supported devices · 505a7f54
      Meir Lichtinger authored
      Add the upcoming ConnectX-7 device ID.
      
      Fixes: 85327a9c ("net/mlx5: Update the list of the PCI supported devices")
      Signed-off-by: default avatarMeir Lichtinger <meirl@mellanox.com>
      Reviewed-by: default avatarEran Ben Elisha <eranbe@mellanox.com>
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      505a7f54
    • Paul Blakey's avatar
      net/mlx5: Fix lowest FDB pool size · 93b8a7ec
      Paul Blakey authored
      The pool sizes represent the pool sizes in the fw. when we request
      a pool size from fw, it will return the next possible group.
      We track how many pools the fw has left and start requesting groups
      from the big to the small.
      When we start request 4k group, which doesn't exists in fw, fw
      wants to allocate the next possible size, 64k, but will fail since
      its exhausted. The correct smallest pool size in fw is 128 and not 4k.
      
      Fixes: e52c2802 ("net/mlx5: E-Switch, Add chains and priorities")
      Signed-off-by: default avatarPaul Blakey <paulb@mellanox.com>
      Reviewed-by: default avatarRoi Dayan <roid@mellanox.com>
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      93b8a7ec
    • David S. Miller's avatar
      Merge branch 'netdev-seq_file-next-functions-should-increase-position-index' · 623c8d5c
      David S. Miller authored
      Vasily Averin says:
      
      ====================
      netdev: seq_file .next functions should increase position index
      
      In Aug 2018 NeilBrown noticed
      commit 1f4aace6 ("fs/seq_file.c: simplify seq_file iteration code and interface")
      "Some ->next functions do not increment *pos when they return NULL...
      Note that such ->next functions are buggy and should be fixed.
      A simple demonstration is
      
      dd if=/proc/swaps bs=1000 skip=1
      
      Choose any block size larger than the size of /proc/swaps.  This will
      always show the whole last line of /proc/swaps"
      
      Described problem is still actual. If you make lseek into middle of last output line
      following read will output end of last line and whole last line once again.
      
      $ dd if=/proc/swaps bs=1  # usual output
      Filename				Type		Size	Used	Priority
      /dev/dm-0                               partition	4194812	97536	-2
      104+0 records in
      104+0 records out
      104 bytes copied
      
      $ dd if=/proc/swaps bs=40 skip=1    # last line was generated twice
      dd: /proc/swaps: cannot skip to specified offset
      v/dm-0                               partition	4194812	97536	-2
      /dev/dm-0                               partition	4194812	97536	-2
      3+1 records in
      3+1 records out
      131 bytes copied
      
      There are lot of other affected files, I've found 30+ including
      /proc/net/ip_tables_matches and /proc/sysvipc/*
      
      This patch-set fixes files related to netdev@
      
      https://bugzilla.kernel.org/show_bug.cgi?id=206283
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      623c8d5c
    • Vasily Averin's avatar
      ipv6_route_seq_next should increase position index · 4fc427e0
      Vasily Averin authored
      if seq_file .next fuction does not change position index,
      read after some lseek can generate unexpected output.
      
      https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by: default avatarVasily Averin <vvs@virtuozzo.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4fc427e0
    • Vasily Averin's avatar
      rt_cpu_seq_next should increase position index · a3ea8673
      Vasily Averin authored
      if seq_file .next fuction does not change position index,
      read after some lseek can generate unexpected output.
      
      https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by: default avatarVasily Averin <vvs@virtuozzo.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a3ea8673
    • Vasily Averin's avatar
      neigh_stat_seq_next() should increase position index · 1e3f9f07
      Vasily Averin authored
      if seq_file .next fuction does not change position index,
      read after some lseek can generate unexpected output.
      
      https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by: default avatarVasily Averin <vvs@virtuozzo.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1e3f9f07
    • Vasily Averin's avatar
      vcc_seq_next should increase position index · 8bf70920
      Vasily Averin authored
      if seq_file .next fuction does not change position index,
      read after some lseek can generate unexpected output.
      
      https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by: default avatarVasily Averin <vvs@virtuozzo.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8bf70920
    • Vasily Averin's avatar
      l2t_seq_next should increase position index · 66018a10
      Vasily Averin authored
      if seq_file .next fuction does not change position index,
      read after some lseek can generate unexpected output.
      
      https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by: default avatarVasily Averin <vvs@virtuozzo.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      66018a10
    • Vasily Averin's avatar
      seq_tab_next() should increase position index · 70a87287
      Vasily Averin authored
      if seq_file .next fuction does not change position index,
      read after some lseek can generate unexpected output.
      
      https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by: default avatarVasily Averin <vvs@virtuozzo.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      70a87287
    • Eric Dumazet's avatar
      tcp: do not leave dangling pointers in tp->highest_sack · 2bec445f
      Eric Dumazet authored
      Latest commit 85369750 ("tcp: Fix highest_sack and highest_sack_seq")
      apparently allowed syzbot to trigger various crashes in TCP stack [1]
      
      I believe this commit only made things easier for syzbot to find
      its way into triggering use-after-frees. But really the bugs
      could lead to bad TCP behavior or even plain crashes even for
      non malicious peers.
      
      I have audited all calls to tcp_rtx_queue_unlink() and
      tcp_rtx_queue_unlink_and_free() and made sure tp->highest_sack would be updated
      if we are removing from rtx queue the skb that tp->highest_sack points to.
      
      These updates were missing in three locations :
      
      1) tcp_clean_rtx_queue() [This one seems quite serious,
                                I have no idea why this was not caught earlier]
      
      2) tcp_rtx_queue_purge() [Probably not a big deal for normal operations]
      
      3) tcp_send_synack()     [Probably not a big deal for normal operations]
      
      [1]
      BUG: KASAN: use-after-free in tcp_highest_sack_seq include/net/tcp.h:1864 [inline]
      BUG: KASAN: use-after-free in tcp_highest_sack_seq include/net/tcp.h:1856 [inline]
      BUG: KASAN: use-after-free in tcp_check_sack_reordering+0x33c/0x3a0 net/ipv4/tcp_input.c:891
      Read of size 4 at addr ffff8880a488d068 by task ksoftirqd/1/16
      
      CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.5.0-rc5-syzkaller #0
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
      Call Trace:
       __dump_stack lib/dump_stack.c:77 [inline]
       dump_stack+0x197/0x210 lib/dump_stack.c:118
       print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
       __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506
       kasan_report+0x12/0x20 mm/kasan/common.c:639
       __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:134
       tcp_highest_sack_seq include/net/tcp.h:1864 [inline]
       tcp_highest_sack_seq include/net/tcp.h:1856 [inline]
       tcp_check_sack_reordering+0x33c/0x3a0 net/ipv4/tcp_input.c:891
       tcp_try_undo_partial net/ipv4/tcp_input.c:2730 [inline]
       tcp_fastretrans_alert+0xf74/0x23f0 net/ipv4/tcp_input.c:2847
       tcp_ack+0x2577/0x5bf0 net/ipv4/tcp_input.c:3710
       tcp_rcv_established+0x6dd/0x1e90 net/ipv4/tcp_input.c:5706
       tcp_v4_do_rcv+0x619/0x8d0 net/ipv4/tcp_ipv4.c:1619
       tcp_v4_rcv+0x307f/0x3b40 net/ipv4/tcp_ipv4.c:2001
       ip_protocol_deliver_rcu+0x5a/0x880 net/ipv4/ip_input.c:204
       ip_local_deliver_finish+0x23b/0x380 net/ipv4/ip_input.c:231
       NF_HOOK include/linux/netfilter.h:307 [inline]
       NF_HOOK include/linux/netfilter.h:301 [inline]
       ip_local_deliver+0x1e9/0x520 net/ipv4/ip_input.c:252
       dst_input include/net/dst.h:442 [inline]
       ip_rcv_finish+0x1db/0x2f0 net/ipv4/ip_input.c:428
       NF_HOOK include/linux/netfilter.h:307 [inline]
       NF_HOOK include/linux/netfilter.h:301 [inline]
       ip_rcv+0xe8/0x3f0 net/ipv4/ip_input.c:538
       __netif_receive_skb_one_core+0x113/0x1a0 net/core/dev.c:5148
       __netif_receive_skb+0x2c/0x1d0 net/core/dev.c:5262
       process_backlog+0x206/0x750 net/core/dev.c:6093
       napi_poll net/core/dev.c:6530 [inline]
       net_rx_action+0x508/0x1120 net/core/dev.c:6598
       __do_softirq+0x262/0x98c kernel/softirq.c:292
       run_ksoftirqd kernel/softirq.c:603 [inline]
       run_ksoftirqd+0x8e/0x110 kernel/softirq.c:595
       smpboot_thread_fn+0x6a3/0xa40 kernel/smpboot.c:165
       kthread+0x361/0x430 kernel/kthread.c:255
       ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352
      
      Allocated by task 10091:
       save_stack+0x23/0x90 mm/kasan/common.c:72
       set_track mm/kasan/common.c:80 [inline]
       __kasan_kmalloc mm/kasan/common.c:513 [inline]
       __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486
       kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:521
       slab_post_alloc_hook mm/slab.h:584 [inline]
       slab_alloc_node mm/slab.c:3263 [inline]
       kmem_cache_alloc_node+0x138/0x740 mm/slab.c:3575
       __alloc_skb+0xd5/0x5e0 net/core/skbuff.c:198
       alloc_skb_fclone include/linux/skbuff.h:1099 [inline]
       sk_stream_alloc_skb net/ipv4/tcp.c:875 [inline]
       sk_stream_alloc_skb+0x113/0xc90 net/ipv4/tcp.c:852
       tcp_sendmsg_locked+0xcf9/0x3470 net/ipv4/tcp.c:1282
       tcp_sendmsg+0x30/0x50 net/ipv4/tcp.c:1432
       inet_sendmsg+0x9e/0xe0 net/ipv4/af_inet.c:807
       sock_sendmsg_nosec net/socket.c:652 [inline]
       sock_sendmsg+0xd7/0x130 net/socket.c:672
       __sys_sendto+0x262/0x380 net/socket.c:1998
       __do_sys_sendto net/socket.c:2010 [inline]
       __se_sys_sendto net/socket.c:2006 [inline]
       __x64_sys_sendto+0xe1/0x1a0 net/socket.c:2006
       do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      
      Freed by task 10095:
       save_stack+0x23/0x90 mm/kasan/common.c:72
       set_track mm/kasan/common.c:80 [inline]
       kasan_set_free_info mm/kasan/common.c:335 [inline]
       __kasan_slab_free+0x102/0x150 mm/kasan/common.c:474
       kasan_slab_free+0xe/0x10 mm/kasan/common.c:483
       __cache_free mm/slab.c:3426 [inline]
       kmem_cache_free+0x86/0x320 mm/slab.c:3694
       kfree_skbmem+0x178/0x1c0 net/core/skbuff.c:645
       __kfree_skb+0x1e/0x30 net/core/skbuff.c:681
       sk_eat_skb include/net/sock.h:2453 [inline]
       tcp_recvmsg+0x1252/0x2930 net/ipv4/tcp.c:2166
       inet_recvmsg+0x136/0x610 net/ipv4/af_inet.c:838
       sock_recvmsg_nosec net/socket.c:886 [inline]
       sock_recvmsg net/socket.c:904 [inline]
       sock_recvmsg+0xce/0x110 net/socket.c:900
       __sys_recvfrom+0x1ff/0x350 net/socket.c:2055
       __do_sys_recvfrom net/socket.c:2073 [inline]
       __se_sys_recvfrom net/socket.c:2069 [inline]
       __x64_sys_recvfrom+0xe1/0x1a0 net/socket.c:2069
       do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      
      The buggy address belongs to the object at ffff8880a488d040
       which belongs to the cache skbuff_fclone_cache of size 456
      The buggy address is located 40 bytes inside of
       456-byte region [ffff8880a488d040, ffff8880a488d208)
      The buggy address belongs to the page:
      page:ffffea0002922340 refcount:1 mapcount:0 mapping:ffff88821b057000 index:0x0
      raw: 00fffe0000000200 ffffea00022a5788 ffffea0002624a48 ffff88821b057000
      raw: 0000000000000000 ffff8880a488d040 0000000100000006 0000000000000000
      page dumped because: kasan: bad access detected
      
      Memory state around the buggy address:
       ffff8880a488cf00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
       ffff8880a488cf80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
      >ffff8880a488d000: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
                                                                ^
       ffff8880a488d080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
       ffff8880a488d100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
      
      Fixes: 85369750 ("tcp: Fix highest_sack and highest_sack_seq")
      Fixes: 50895b9d ("tcp: highest_sack fix")
      Fixes: 737ff314 ("tcp: use sequence distance to detect reordering")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Cc: Cambda Zhu <cambda@linux.alibaba.com>
      Cc: Yuchung Cheng <ycheng@google.com>
      Cc: Neal Cardwell <ncardwell@google.com>
      Acked-by: default avatarNeal Cardwell <ncardwell@google.com>
      Acked-by: default avatarYuchung Cheng <ycheng@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2bec445f
    • Colin Ian King's avatar
      net/rose: fix spelling mistake "to" -> "too" · 4d299f18
      Colin Ian King authored
      There is a spelling mistake in a printk message. Fix it.
      Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4d299f18
    • Colin Ian King's avatar
      caif_usb: fix spelling mistake "to" -> "too" · 43d88774
      Colin Ian King authored
      There is a spelling mistake in a pr_warn message. Fix it.
      Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      43d88774
    • Colin Ian King's avatar
      ipvs: fix spelling mistake "to" -> "too" · 971485a0
      Colin Ian King authored
      There is a spelling mistake in a IP_VS_ERR_RL message. Fix it.
      Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      971485a0
    • Colin Ian King's avatar
      i40e: fix spelling mistake "to" -> "too" · 959b1825
      Colin Ian King authored
      There is a spelling mistake in a hw_dbg message. Fix it.
      Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      959b1825
  2. 23 Jan, 2020 26 commits
    • Cong Wang's avatar
      net_sched: fix datalen for ematch · 61678d28
      Cong Wang authored
      syzbot reported an out-of-bound access in em_nbyte. As initially
      analyzed by Eric, this is because em_nbyte sets its own em->datalen
      in em_nbyte_change() other than the one specified by user, but this
      value gets overwritten later by its caller tcf_em_validate().
      We should leave em->datalen untouched to respect their choices.
      
      I audit all the in-tree ematch users, all of those implement
      ->change() set em->datalen, so we can just avoid setting it twice
      in this case.
      
      Reported-and-tested-by: syzbot+5af9a90dad568aa9f611@syzkaller.appspotmail.com
      Reported-by: syzbot+2f07903a5b05e7f36410@syzkaller.appspotmail.com
      Fixes: 1da177e4 ("Linux-2.6.12-rc2")
      Cc: Eric Dumazet <eric.dumazet@gmail.com>
      Signed-off-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
      Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      61678d28
    • David S. Miller's avatar
      Merge branch 'Fixes-for-SONIC-ethernet-driver' · 42c9bdae
      David S. Miller authored
      Finn Thain says:
      
      ====================
      Fixes for SONIC ethernet driver
      
      Various SONIC driver problems have become apparent over the years,
      including tx watchdog timeouts, lost packets and duplicated packets.
      
      The problems are mostly caused by bugs in buffer handling, locking and
      (re-)initialization code.
      
      This patch series resolves these problems.
      
      This series has been tested on National Semiconductor hardware (macsonic),
      qemu-system-m68k (macsonic) and qemu-system-mips64el (jazzsonic).
      
      The emulated dp8393x device used in QEMU also has bugs.
      I have fixed the bugs that I know of in a series of patches at,
      https://github.com/fthain/qemu/commits/sonic
      
      Changed since v1:
       - Minor revisions as described in commit logs.
       - Deferred net-next patches.
      Changed since v2:
       - Minor revisions as described in commit logs.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      42c9bdae
    • Finn Thain's avatar
      net/sonic: Prevent tx watchdog timeout · 686f85d7
      Finn Thain authored
      Section 5.5.3.2 of the datasheet says,
      
          If FIFO Underrun, Byte Count Mismatch, Excessive Collision, or
          Excessive Deferral (if enabled) errors occur, transmission ceases.
      
      In this situation, the chip asserts a TXER interrupt rather than TXDN.
      But the handler for the TXDN is the only way that the transmit queue
      gets restarted. Hence, an aborted transmission can result in a watchdog
      timeout.
      
      This problem can be reproduced on congested link, as that can result in
      excessive transmitter collisions. Another way to reproduce this is with
      a FIFO Underrun, which may be caused by DMA latency.
      
      In event of a TXER interrupt, prevent a watchdog timeout by restarting
      transmission.
      
      Fixes: 1da177e4 ("Linux-2.6.12-rc2")
      Tested-by: default avatarStan Johnson <userm57@yahoo.com>
      Signed-off-by: default avatarFinn Thain <fthain@telegraphics.com.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      686f85d7
    • Finn Thain's avatar
      net/sonic: Fix CAM initialization · 772f6642
      Finn Thain authored
      Section 4.3.1 of the datasheet says,
      
          This bit [TXP] must not be set if a Load CAM operation is in
          progress (LCAM is set). The SONIC will lock up if both bits are
          set simultaneously.
      
      Testing has shown that the driver sometimes attempts to set LCAM
      while TXP is set. Avoid this by waiting for command completion
      before and after giving the LCAM command.
      
      After issuing the Load CAM command, poll for !SONIC_CR_LCAM rather than
      SONIC_INT_LCD, because the SONIC_CR_TXP bit can't be used until
      !SONIC_CR_LCAM.
      
      When in reset mode, take the opportunity to reset the CAM Enable
      register.
      
      Fixes: 1da177e4 ("Linux-2.6.12-rc2")
      Tested-by: default avatarStan Johnson <userm57@yahoo.com>
      Signed-off-by: default avatarFinn Thain <fthain@telegraphics.com.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      772f6642
    • Finn Thain's avatar
      net/sonic: Fix command register usage · 27e0c31c
      Finn Thain authored
      There are several issues relating to command register usage during
      chip initialization.
      
      Firstly, the SONIC sometimes comes out of software reset with the
      Start Timer bit set. This gets logged as,
      
          macsonic macsonic eth0: sonic_init: status=24, i=101
      
      Avoid this by giving the Stop Timer command earlier than later.
      
      Secondly, the loop that waits for the Read RRA command to complete has
      the break condition inverted. That's why the for loop iterates until
      its termination condition. Call the helper for this instead.
      
      Finally, give the Receiver Enable command after clearing interrupts,
      not before, to avoid the possibility of losing an interrupt.
      
      Fixes: 1da177e4 ("Linux-2.6.12-rc2")
      Tested-by: default avatarStan Johnson <userm57@yahoo.com>
      Signed-off-by: default avatarFinn Thain <fthain@telegraphics.com.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      27e0c31c
    • Finn Thain's avatar
      net/sonic: Quiesce SONIC before re-initializing descriptor memory · 3f4b7e6a
      Finn Thain authored
      Make sure the SONIC's DMA engine is idle before altering the transmit
      and receive descriptors. Add a helper for this as it will be needed
      again.
      
      Fixes: 1da177e4 ("Linux-2.6.12-rc2")
      Tested-by: default avatarStan Johnson <userm57@yahoo.com>
      Signed-off-by: default avatarFinn Thain <fthain@telegraphics.com.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3f4b7e6a
    • Finn Thain's avatar
      net/sonic: Fix receive buffer replenishment · 89ba879e
      Finn Thain authored
      As soon as the driver is finished with a receive buffer it allocs a new
      one and overwrites the corresponding RRA entry with a new buffer pointer.
      
      Problem is, the buffer pointer is split across two word-sized registers.
      It can't be updated in one atomic store. So this operation races with the
      chip while it stores received packets and advances its RRP register.
      This could result in memory corruption by a DMA write.
      
      Avoid this problem by adding buffers only at the location given by the
      RWP register, in accordance with the National Semiconductor datasheet.
      
      Re-factor this code into separate functions to calculate a RRA pointer
      and to update the RWP.
      
      Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update")
      Tested-by: default avatarStan Johnson <userm57@yahoo.com>
      Signed-off-by: default avatarFinn Thain <fthain@telegraphics.com.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      89ba879e
    • Finn Thain's avatar
      net/sonic: Improve receive descriptor status flag check · 94b16634
      Finn Thain authored
      After sonic_tx_timeout() calls sonic_init(), it can happen that
      sonic_rx() will subsequently encounter a receive descriptor with no
      flags set. Remove the comment that says that this can't happen.
      
      When giving a receive descriptor to the SONIC, clear the descriptor
      status field. That way, any rx descriptor with flags set can only be
      a newly received packet.
      
      Don't process a descriptor without the LPKT bit set. The buffer is
      still in use by the SONIC.
      
      Fixes: 1da177e4 ("Linux-2.6.12-rc2")
      Tested-by: default avatarStan Johnson <userm57@yahoo.com>
      Signed-off-by: default avatarFinn Thain <fthain@telegraphics.com.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      94b16634
    • Finn Thain's avatar
      net/sonic: Avoid needless receive descriptor EOL flag updates · eaabfd19
      Finn Thain authored
      The while loop in sonic_rx() traverses the rx descriptor ring. It stops
      when it reaches a descriptor that the SONIC has not used. Each iteration
      advances the EOL flag so the SONIC can keep using more descriptors.
      Therefore, the while loop has no definite termination condition.
      
      The algorithm described in the National Semiconductor literature is quite
      different. It consumes descriptors up to the one with its EOL flag set
      (which will also have its "in use" flag set). All freed descriptors are
      then returned to the ring at once, by adjusting the EOL flags (and link
      pointers).
      
      Adopt the algorithm from datasheet as it's simpler, terminates quickly
      and avoids a lot of pointless descriptor EOL flag changes.
      
      Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update")
      Tested-by: default avatarStan Johnson <userm57@yahoo.com>
      Signed-off-by: default avatarFinn Thain <fthain@telegraphics.com.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      eaabfd19
    • Finn Thain's avatar
      net/sonic: Fix receive buffer handling · 9e311820
      Finn Thain authored
      The SONIC can sometimes advance its rx buffer pointer (RRP register)
      without advancing its rx descriptor pointer (CRDA register). As a result
      the index of the current rx descriptor may not equal that of the current
      rx buffer. The driver mistakenly assumes that they are always equal.
      This assumption leads to incorrect packet lengths and possible packet
      duplication. Avoid this by calling a new function to locate the buffer
      corresponding to a given descriptor.
      
      Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update")
      Tested-by: default avatarStan Johnson <userm57@yahoo.com>
      Signed-off-by: default avatarFinn Thain <fthain@telegraphics.com.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9e311820
    • Finn Thain's avatar
      net/sonic: Fix interface error stats collection · 427db97d
      Finn Thain authored
      The tx_aborted_errors statistic should count packets flagged with EXD,
      EXC, FU, or BCM bits because those bits denote an aborted transmission.
      That corresponds to the bitmask 0x0446, not 0x0642. Use macros for these
      constants to avoid mistakes. Better to leave out FIFO Underruns (FU) as
      there's a separate counter for that purpose.
      
      Don't lump all these errors in with the general tx_errors counter as
      that's used for tx timeout events.
      
      On the rx side, don't count RDE and RBAE interrupts as dropped packets.
      These interrupts don't indicate a lost packet, just a lack of resources.
      When a lack of resources results in a lost packet, this gets reported
      in the rx_missed_errors counter (along with RFO events).
      
      Don't double-count rx_frame_errors and rx_crc_errors.
      
      Don't use the general rx_errors counter for events that already have
      special counters.
      
      Fixes: 1da177e4 ("Linux-2.6.12-rc2")
      Tested-by: default avatarStan Johnson <userm57@yahoo.com>
      Signed-off-by: default avatarFinn Thain <fthain@telegraphics.com.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      427db97d
    • Finn Thain's avatar
      net/sonic: Use MMIO accessors · e3885f57
      Finn Thain authored
      The driver accesses descriptor memory which is simultaneously accessed by
      the chip, so the compiler must not be allowed to re-order CPU accesses.
      sonic_buf_get() used 'volatile' to prevent that. sonic_buf_put() should
      have done so too but was overlooked.
      
      Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update")
      Tested-by: default avatarStan Johnson <userm57@yahoo.com>
      Signed-off-by: default avatarFinn Thain <fthain@telegraphics.com.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e3885f57
    • Finn Thain's avatar
      net/sonic: Clear interrupt flags immediately · 5fedabf5
      Finn Thain authored
      The chip can change a packet's descriptor status flags at any time.
      However, an active interrupt flag gets cleared rather late. This
      allows a race condition that could theoretically lose an interrupt.
      Fix this by clearing asserted interrupt flags immediately.
      
      Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update")
      Tested-by: default avatarStan Johnson <userm57@yahoo.com>
      Signed-off-by: default avatarFinn Thain <fthain@telegraphics.com.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5fedabf5
    • Finn Thain's avatar
      net/sonic: Add mutual exclusion for accessing shared state · 865ad2f2
      Finn Thain authored
      The netif_stop_queue() call in sonic_send_packet() races with the
      netif_wake_queue() call in sonic_interrupt(). This causes issues
      like "NETDEV WATCHDOG: eth0 (macsonic): transmit queue 0 timed out".
      Fix this by disabling interrupts when accessing tx_skb[] and next_tx.
      Update a comment to clarify the synchronization properties.
      
      Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update")
      Tested-by: default avatarStan Johnson <userm57@yahoo.com>
      Signed-off-by: default avatarFinn Thain <fthain@telegraphics.com.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      865ad2f2
    • Madalin Bucur's avatar
      net: fsl/fman: rename IF_MODE_XGMII to IF_MODE_10G · 457bfc0a
      Madalin Bucur authored
      As the only 10G PHY interface type defined at the moment the code
      was developed was XGMII, although the PHY interface mode used was
      not XGMII, XGMII was used in the code to denote 10G. This patch
      renames the 10G interface mode to remove the ambiguity.
      Signed-off-by: default avatarMadalin Bucur <madalin.bucur@oss.nxp.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      457bfc0a
    • David S. Miller's avatar
      Merge branch 'net-fsl-fman-address-erratum-A011043' · 72b59174
      David S. Miller authored
      Madalin Bucur says:
      
      ====================
      net: fsl/fman: address erratum A011043
      
      This addresses a HW erratum on some QorIQ DPAA devices.
      
      MDIO reads to internal PCS registers may result in having
      the MDIO_CFG[MDIO_RD_ER] bit set, even when there is no
      error and read data (MDIO_DATA[MDIO_DATA]) is correct.
      Software may get false read error when reading internal
      PCS registers through MDIO. As a workaround, all internal
      MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.
      When the issue was present, one could see such errors
      during boot:
      
        mdio_bus ffe4e5000: Error while reading PHY0 reg at 3.3
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      72b59174
    • Madalin Bucur's avatar
      net/fsl: treat fsl,erratum-a011043 · 1d3ca681
      Madalin Bucur authored
      When fsl,erratum-a011043 is set, adjust for erratum A011043:
      MDIO reads to internal PCS registers may result in having
      the MDIO_CFG[MDIO_RD_ER] bit set, even when there is no
      error and read data (MDIO_DATA[MDIO_DATA]) is correct.
      Software may get false read error when reading internal
      PCS registers through MDIO. As a workaround, all internal
      MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.
      Signed-off-by: default avatarMadalin Bucur <madalin.bucur@oss.nxp.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1d3ca681
    • Madalin Bucur's avatar
      powerpc/fsl/dts: add fsl,erratum-a011043 · 73d527ae
      Madalin Bucur authored
      Add fsl,erratum-a011043 to internal MDIO buses.
      Software may get false read error when reading internal
      PCS registers through MDIO. As a workaround, all internal
      MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.
      Signed-off-by: default avatarMadalin Bucur <madalin.bucur@oss.nxp.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      73d527ae
    • Madalin Bucur's avatar
      dt-bindings: net: add fsl,erratum-a011043 · 2934d2c6
      Madalin Bucur authored
      Add an entry for erratum A011043: the MDIO_CFG[MDIO_RD_ER]
      bit may be falsely set when reading internal PCS registers.
      MDIO reads to internal PCS registers may result in having
      the MDIO_CFG[MDIO_RD_ER] bit set, even when there is no
      error and read data (MDIO_DATA[MDIO_DATA]) is correct.
      Software may get false read error when reading internal
      PCS registers through MDIO. As a workaround, all internal
      MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.
      Signed-off-by: default avatarMadalin Bucur <madalin.bucur@oss.nxp.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2934d2c6
    • Manish Chopra's avatar
      qlcnic: Fix CPU soft lockup while collecting firmware dump · 22e98449
      Manish Chopra authored
      Driver while collecting firmware dump takes longer time to
      collect/process some of the firmware dump entries/memories.
      Bigger capture masks makes it worse as it results in larger
      amount of data being collected and results in CPU soft lockup.
      Place cond_resched() in some of the driver flows that are
      expectedly time consuming to relinquish the CPU to avoid CPU
      soft lockup panic.
      Signed-off-by: default avatarShahed Shaikh <shshaikh@marvell.com>
      Tested-by: default avatarYonggen Xu <Yonggen.Xu@dell.com>
      Signed-off-by: default avatarManish Chopra <manishc@marvell.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      22e98449
    • Kristian Evensen's avatar
      fou: Fix IPv6 netlink policy · bb48eb9b
      Kristian Evensen authored
      When submitting v2 of "fou: Support binding FoU socket" (1713cb37),
      I accidentally sent the wrong version of the patch and one fix was
      missing. In the initial version of the patch, as well as the version 2
      that I submitted, I incorrectly used ".type" for the two V6-attributes.
      The correct is to use ".len".
      Reported-by: default avatarDmitry Vyukov <dvyukov@google.com>
      Fixes: 1713cb37 ("fou: Support binding FoU socket")
      Signed-off-by: default avatarKristian Evensen <kristian.evensen@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bb48eb9b
    • David S. Miller's avatar
      Merge tag 'wireless-drivers-2020-01-23' of... · 5169adbc
      David S. Miller authored
      Merge tag 'wireless-drivers-2020-01-23' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
      
      Kalle Valo says:
      
      ====================
      wireless-drivers fixes for v5.5
      
      Second set of fixes for v5.5. There are quite a few patches,
      especially on iwlwifi, due to me being on a long break. Libertas also
      has a security fix and mt76 a build fix.
      
      iwlwifi
      
      * don't send the PPAG command when PPAG is disabled, since it can cause problems
      
      * a few fixes for a HW bug
      
      * a fix for RS offload;
      
      * a fix for 3168 devices where the NVM tables where the wrong tables were being read
      
      * fix a couple of potential memory leaks in TXQ code
      
      * disable L0S states in all hardware since our hardware doesn't
       officially support them anymore (and older versions of the hardware
       had instability in these states)
      
      * remove lar_disable parameter since it has been causing issues for
        some people who erroneously disable it
      
      * force the debug monitor HW to stop also when debug is disabled,
        since it sometimes stays on and prevents low system power states
      
      * don't send IWL_MVM_RXQ_NSSN_SYNC notification due to DMA problems
      
      libertas
      
      * fix two buffer overflows
      
      mt76
      
      * build fix related to CONFIG_MT76_LEDS
      
      * fix off by one in bitrates handling
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5169adbc
    • Eric Dumazet's avatar
      tun: add mutex_unlock() call and napi.skb clearing in tun_get_user() · 1efba987
      Eric Dumazet authored
      If both IFF_NAPI_FRAGS mode and XDP are enabled, and the XDP program
      consumes the skb, we need to clear the napi.skb (or risk
      a use-after-free) and release the mutex (or risk a deadlock)
      
      WARNING: lock held when returning to user space!
      5.5.0-rc6-syzkaller #0 Not tainted
      ------------------------------------------------
      syz-executor.0/455 is leaving the kernel with locks still held!
      1 lock held by syz-executor.0/455:
       #0: ffff888098f6e748 (&tfile->napi_mutex){+.+.}, at: tun_get_user+0x1604/0x3fc0 drivers/net/tun.c:1835
      
      Fixes: 90e33d45 ("tun: enable napi_gro_frags() for TUN/TAP driver")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
      Cc: Petar Penkov <ppenkov@google.com>
      Cc: Willem de Bruijn <willemb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1efba987
    • Ido Schimmel's avatar
      mlxsw: spectrum_acl: Fix use-after-free during reload · 971de2e5
      Ido Schimmel authored
      During reload (or module unload), the router block is de-initialized.
      Among other things, this results in the removal of a default multicast
      route from each active virtual router (VRF). These default routes are
      configured during initialization to trap packets to the CPU. In
      Spectrum-2, unlike Spectrum-1, multicast routes are implemented using
      ACL rules.
      
      Since the router block is de-initialized before the ACL block, it is
      possible that the ACL rules corresponding to the default routes are
      deleted while being accessed by the ACL delayed work that queries rules'
      activity from the device. This can result in a rare use-after-free [1].
      
      Fix this by protecting the rules list accessed by the delayed work with
      a lock. We cannot use a spinlock as the activity read operation is
      blocking.
      
      [1]
      [  123.331662] ==================================================================
      [  123.339920] BUG: KASAN: use-after-free in mlxsw_sp_acl_rule_activity_update_work+0x330/0x3b0
      [  123.349381] Read of size 8 at addr ffff8881f3bb4520 by task kworker/0:2/78
      [  123.357080]
      [  123.358773] CPU: 0 PID: 78 Comm: kworker/0:2 Not tainted 5.5.0-rc5-custom-33108-gf5df95d3ef41 #2209
      [  123.368898] Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018
      [  123.378456] Workqueue: mlxsw_core mlxsw_sp_acl_rule_activity_update_work
      [  123.385970] Call Trace:
      [  123.388734]  dump_stack+0xc6/0x11e
      [  123.392568]  print_address_description.constprop.4+0x21/0x340
      [  123.403236]  __kasan_report.cold.8+0x76/0xb1
      [  123.414884]  kasan_report+0xe/0x20
      [  123.418716]  mlxsw_sp_acl_rule_activity_update_work+0x330/0x3b0
      [  123.444034]  process_one_work+0xb06/0x19a0
      [  123.453731]  worker_thread+0x91/0xe90
      [  123.467348]  kthread+0x348/0x410
      [  123.476847]  ret_from_fork+0x24/0x30
      [  123.480863]
      [  123.482545] Allocated by task 73:
      [  123.486273]  save_stack+0x19/0x80
      [  123.490000]  __kasan_kmalloc.constprop.6+0xc1/0xd0
      [  123.495379]  mlxsw_sp_acl_rule_create+0xa7/0x230
      [  123.500566]  mlxsw_sp2_mr_tcam_route_create+0xf6/0x3e0
      [  123.506334]  mlxsw_sp_mr_tcam_route_create+0x5b4/0x820
      [  123.512102]  mlxsw_sp_mr_table_create+0x3b5/0x690
      [  123.517389]  mlxsw_sp_vr_get+0x289/0x4d0
      [  123.521797]  mlxsw_sp_fib_node_get+0xa2/0x990
      [  123.526692]  mlxsw_sp_router_fib4_event_work+0x54c/0x2d60
      [  123.532752]  process_one_work+0xb06/0x19a0
      [  123.537352]  worker_thread+0x91/0xe90
      [  123.541471]  kthread+0x348/0x410
      [  123.545103]  ret_from_fork+0x24/0x30
      [  123.549113]
      [  123.550795] Freed by task 518:
      [  123.554231]  save_stack+0x19/0x80
      [  123.557958]  __kasan_slab_free+0x125/0x170
      [  123.562556]  kfree+0xd7/0x3a0
      [  123.565895]  mlxsw_sp_acl_rule_destroy+0x63/0xd0
      [  123.571081]  mlxsw_sp2_mr_tcam_route_destroy+0xd5/0x130
      [  123.576946]  mlxsw_sp_mr_tcam_route_destroy+0xba/0x260
      [  123.582714]  mlxsw_sp_mr_table_destroy+0x1ab/0x290
      [  123.588091]  mlxsw_sp_vr_put+0x1db/0x350
      [  123.592496]  mlxsw_sp_fib_node_put+0x298/0x4c0
      [  123.597486]  mlxsw_sp_vr_fib_flush+0x15b/0x360
      [  123.602476]  mlxsw_sp_router_fib_flush+0xba/0x470
      [  123.607756]  mlxsw_sp_vrs_fini+0xaa/0x120
      [  123.612260]  mlxsw_sp_router_fini+0x137/0x384
      [  123.617152]  mlxsw_sp_fini+0x30a/0x4a0
      [  123.621374]  mlxsw_core_bus_device_unregister+0x159/0x600
      [  123.627435]  mlxsw_devlink_core_bus_device_reload_down+0x7e/0xb0
      [  123.634176]  devlink_reload+0xb4/0x380
      [  123.638391]  devlink_nl_cmd_reload+0x610/0x700
      [  123.643382]  genl_rcv_msg+0x6a8/0xdc0
      [  123.647497]  netlink_rcv_skb+0x134/0x3a0
      [  123.651904]  genl_rcv+0x29/0x40
      [  123.655436]  netlink_unicast+0x4d4/0x700
      [  123.659843]  netlink_sendmsg+0x7c0/0xc70
      [  123.664251]  __sys_sendto+0x265/0x3c0
      [  123.668367]  __x64_sys_sendto+0xe2/0x1b0
      [  123.672773]  do_syscall_64+0xa0/0x530
      [  123.676892]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
      [  123.682552]
      [  123.684238] The buggy address belongs to the object at ffff8881f3bb4500
      [  123.684238]  which belongs to the cache kmalloc-128 of size 128
      [  123.698261] The buggy address is located 32 bytes inside of
      [  123.698261]  128-byte region [ffff8881f3bb4500, ffff8881f3bb4580)
      [  123.711303] The buggy address belongs to the page:
      [  123.716682] page:ffffea0007ceed00 refcount:1 mapcount:0 mapping:ffff888236403500 index:0x0
      [  123.725958] raw: 0200000000000200 dead000000000100 dead000000000122 ffff888236403500
      [  123.734646] raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
      [  123.743315] page dumped because: kasan: bad access detected
      [  123.749562]
      [  123.751241] Memory state around the buggy address:
      [  123.756620]  ffff8881f3bb4400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      [  123.764716]  ffff8881f3bb4480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
      [  123.772812] >ffff8881f3bb4500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
      [  123.780904]                                ^
      [  123.785697]  ffff8881f3bb4580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
      [  123.793793]  ffff8881f3bb4600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      [  123.801883] ==================================================================
      
      Fixes: cf7221a4 ("mlxsw: spectrum_router: Add Multicast routing support for Spectrum-2")
      Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Acked-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      971de2e5
    • David S. Miller's avatar
      Merge branch 'r8152-serial-fixes' · edf9acf5
      David S. Miller authored
      Hayes Wang says:
      
      ====================
      r8152: serial fixes
      
      v3:
      1. Fix the typos for patch #5 and #6.
      2. Modify the commit message of patch #9.
      
      v2:
      For patch #2, move declaring the variable "ocp_data".
      
      v1:
      These patches are used to fix some issues for RTL8153.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      edf9acf5
    • Hayes Wang's avatar
      r8152: disable DelayPhyPwrChg · aa475d93
      Hayes Wang authored
      When enabling this, the device would wait an internal signal which
      wouldn't be triggered. Then, the device couldn't enter P3 mode, so
      the power consumption is increased.
      Signed-off-by: default avatarHayes Wang <hayeswang@realtek.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      aa475d93