- 12 Oct, 2023 11 commits
-
-
Xingyuan Mo authored
We should check whether the NFTA_EXPR_NAME netlink attribute is present before accessing it, otherwise a null pointer deference error will occur. Call Trace: <TASK> dump_stack_lvl+0x4f/0x90 print_report+0x3f0/0x620 kasan_report+0xcd/0x110 __asan_load2+0x7d/0xa0 nla_strcmp+0x2f/0x90 __nft_expr_type_get+0x41/0xb0 nft_expr_inner_parse+0xe3/0x200 nft_inner_init+0x1be/0x2e0 nf_tables_newrule+0x813/0x1230 nfnetlink_rcv_batch+0xec3/0x1170 nfnetlink_rcv+0x1e4/0x220 netlink_unicast+0x34e/0x4b0 netlink_sendmsg+0x45c/0x7e0 __sys_sendto+0x355/0x370 __x64_sys_sendto+0x84/0xa0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Fixes: 3a07327d ("netfilter: nft_inner: support for inner tunnel header matching") Signed-off-by:
Xingyuan Mo <hdthky0@gmail.com> Signed-off-by:
Florian Westphal <fw@strlen.de>
-
Xingyuan Mo authored
We should check whether the NFTA_INNER_NUM netlink attribute is present before accessing it, otherwise a null pointer deference error will occur. Call Trace: dump_stack_lvl+0x4f/0x90 print_report+0x3f0/0x620 kasan_report+0xcd/0x110 __asan_load4+0x84/0xa0 nft_inner_init+0x128/0x2e0 nf_tables_newrule+0x813/0x1230 nfnetlink_rcv_batch+0xec3/0x1170 nfnetlink_rcv+0x1e4/0x220 netlink_unicast+0x34e/0x4b0 netlink_sendmsg+0x45c/0x7e0 __sys_sendto+0x355/0x370 __x64_sys_sendto+0x84/0xa0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Fixes: 3a07327d ("netfilter: nft_inner: support for inner tunnel header matching") Signed-off-by:
-
Pablo Neira Ayuso authored
The dump and reset command should not refresh the timeout, this command is intended to allow users to list existing stateful objects and reset them, element expiration should be refresh via transaction instead with a specific command to achieve this, otherwise this is entering combo semantics that will be hard to be undone later (eg. a user asking to retrieve counters but _not_ requiring to refresh expiration). Fixes: 079cd633 ("netfilter: nf_tables: Introduce NFT_MSG_GETSETELEM_RESET") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Kees Cook authored
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct nft_pipapo_match. Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Jozsef Kadlecsik <kadlec@netfilter.org> Cc: Florian Westphal <fw@strlen.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netfilter-devel@vger.kernel.org Cc: coreteam@netfilter.org Cc: netdev@vger.kernel.org Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1] Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Florian Westphal authored
net/netfilter/nfnetlink_log.c:800:18: warning: variable 'ctinfo' is uninitialized The warning is bogus, the variable is only used if ct is non-NULL and always initialised in that case. Init to 0 too to silence this. Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309100514.ndBFebXN-lkp@intel.com/Signed-off-by:
-
Pablo Neira Ayuso authored
pipapo set backend maintains two copies of the datastructure, removing the elements from the copy that is going to be discarded slows down the abort path significantly, from several minutes to few seconds after this patch. Fixes: 212ed75d ("netfilter: nf_tables: integrate pipapo into commit protocol") Signed-off-by:
-
Ratheesh Kannoth authored
Since page pool param's "order" is set to 0, will result in below warn message if interface is configured with higher rx buffer size. Steps to reproduce the issue. 1. devlink dev param set pci/0002:04:00.0 name receive_buffer_size \ value 8196 cmode runtime 2. ifconfig eth0 up [ 19.901356] ------------[ cut here ]------------ [ 19.901361] WARNING: CPU: 11 PID: 12331 at net/core/page_pool.c:567 page_pool_alloc_frag+0x3c/0x230 [ 19.901449] pstate: 82401009 (Nzcv daif +PAN -UAO +TCO -DIT +SSBS BTYPE=--) [ 19.901451] pc : page_pool_alloc_frag+0x3c/0x230 [ 19.901453] lr : __otx2_alloc_rbuf+0x60/0xbc [rvu_nicpf] [ 19.901460] sp : ffff80000f66b970 [ 19.901461] x29: ffff80000f66b970 x28: 0000000000000000 x27: 0000000000000000 [ 19.901464] x26: ffff800000d15b68 x25: ffff000195b5c080 x24: ffff0002a5a32dc0 [ 19.901467] x23: ffff0001063c0878 x22: 0000000000000100 x21: 0000000000000000 [ 19.901469] x20: 0000000000000000 x19: ffff00016f781000 x18: 0000000000000000 [ 19.901472] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 19.901474] x14: 0000000000000000 x13: ffff0005ffdc9c80 x12: 0000000000000000 [ 19.901477] x11: ffff800009119a38 x10: 4c6ef2e3ba300519 x9 : ffff800000d13844 [ 19.901479] x8 : ffff0002a5a33cc8 x7 : 0000000000000030 x6 : 0000000000000030 [ 19.901482] x5 : 0000000000000005 x4 : 0000000000000000 x3 : 0000000000000a20 [ 19.901484] x2 : 0000000000001080 x1 : ffff80000f66b9d4 x0 : 0000000000001000 [ 19.901487] Call trace: [ 19.901488] page_pool_alloc_frag+0x3c/0x230 [ 19.901490] __otx2_alloc_rbuf+0x60/0xbc [rvu_nicpf] [ 19.901494] otx2_rq_aura_pool_init+0x1c4/0x240 [rvu_nicpf] [ 19.901498] otx2_open+0x228/0xa70 [rvu_nicpf] [ 19.901501] otx2vf_open+0x20/0xd0 [rvu_nicvf] [ 19.901504] __dev_open+0x114/0x1d0 [ 19.901507] __dev_change_flags+0x194/0x210 [ 19.901510] dev_change_flags+0x2c/0x70 [ 19.901512] devinet_ioctl+0x3a4/0x6c4 [ 19.901515] inet_ioctl+0x228/0x240 [ 19.901518] sock_ioctl+0x2ac/0x480 [ 19.901522] __arm64_sys_ioctl+0x564/0xe50 [ 19.901525] invoke_syscall.constprop.0+0x58/0xf0 [ 19.901529] do_el0_svc+0x58/0x150 [ 19.901531] el0_svc+0x30/0x140 [ 19.901533] el0t_64_sync_handler+0xe8/0x114 [ 19.901535] el0t_64_sync+0x1a0/0x1a4 [ 19.901537] ---[ end trace 678c0bf660ad8116 ]--- Fixes: b2e3406a ("octeontx2-pf: Add support for page pool") Signed-off-by:
Ratheesh Kannoth <rkannoth@marvell.com> Reviewed-by:
Yunsheng Lin <linyunsheng@huawei.com> Link: https://lore.kernel.org/r/20231010034842.3807816-1-rkannoth@marvell.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jeremy Cline authored
The protocol is used in a bit mask to determine if the protocol is supported. Assert the provided protocol is less than the maximum defined so it doesn't potentially perform a shift-out-of-bounds and provide a clearer error for undefined protocols vs unsupported ones. Fixes: 6a2968aa ("NFC: basic NCI protocol implementation") Reported-and-tested-by: syzbot+0839b78e119aae1fec78@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=0839b78e119aae1fec78Signed-off-by:
Jeremy Cline <jeremy@jcline.org> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231009200054.82557-1-jeremy@jcline.orgSigned-off-by:
-
Kuniyuki Iwashima authored
Sergei Trofimovich reported a regression [0] caused by commit a0ade840 ("af_packet: Fix warning of fortified memcpy() in packet_getname()."). It introduced a flex array sll_addr_flex in struct sockaddr_ll as a union-ed member with sll_addr to work around the fortified memcpy() check. However, a userspace program uses a struct that has struct sockaddr_ll in the middle, where a flex array is illegal to exist. include/linux/if_packet.h:24:17: error: flexible array member 'sockaddr_ll::<unnamed union>::<unnamed struct>::sll_addr_flex' not at end of 'struct packet_info_t' 24 | __DECLARE_FLEX_ARRAY(unsigned char, sll_addr_flex); | ^~~~~~~~~~~~~~~~~~~~ To fix the regression, let's go back to the first attempt [1] telling memcpy() the actual size of the array. Reported-by:
Sergei Trofimovich <slyich@gmail.com> Closes: https://github.com/NixOS/nixpkgs/pull/252587#issuecomment-1741733002 [0] Link: https://lore.kernel.org/netdev/20230720004410.87588-3-kuniyu@amazon.com/ [1] Fixes: a0ade840 ("af_packet: Fix warning of fortified memcpy() in packet_getname().") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20231009153151.75688-1-kuniyu@amazon.comSigned-off-by:
-
Jakub Kicinski authored
tcp_stream_alloc_skb() initializes the skb to use tcp_tsorted_anchor which is a union with the destructor. We need to clean that TCP-iness up before freeing. Fixes: 73601329 ("tcp: let tcp_mtu_probe() build headless packets") Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20231010173651.3990234-1-kuba@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Merge tag 'ieee802154-for-net-2023-10-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2023-10-10 Just one small fix this time around. Dinghao Liu fixed a potential use-after-free in the ca8210 driver probe function. * tag 'ieee802154-for-net-2023-10-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan: ieee802154: ca8210: Fix a potential UAF in ca8210_probe ==================== Link: https://lore.kernel.org/r/20231010200943.82225-1-stefan@datenfreihafen.orgSigned-off-by:
-
- 11 Oct, 2023 9 commits
-
-
Nils Hoppmann authored
SMC_STAT_PAYLOAD_SUB(_smc_stats, _tech, key, _len, _rc) will calculate wrong bucket positions for payloads of exactly 4096 bytes and (1 << (m + 12)) bytes, with m == SMC_BUF_MAX - 1. Intended bucket distribution: Assume l == size of payload, m == SMC_BUF_MAX - 1. Bucket 0 : 0 < l <= 2^13 Bucket n, 1 <= n <= m-1 : 2^(n+12) < l <= 2^(n+13) Bucket m : l > 2^(m+12) Current solution: _pos = fls64((l) >> 13) [...] _pos = (_pos < m) ? ((l == 1 << (_pos + 12)) ? _pos - 1 : _pos) : m For l == 4096, _pos == -1, but should be _pos == 0. For l == (1 << (m + 12)), _pos == m, but should be _pos == m - 1. In order to avoid special treatment of these corner cases, the calculation is adjusted. The new solution first subtracts the length by one, and then calculates the correct bucket by shifting accordingly, i.e. _pos = fls64((l - 1) >> 13), l > 0. This not only fixes the issues named above, but also makes the whole bucket assignment easier to follow. Same is done for SMC_STAT_RMB_SIZE_SUB(_smc_stats, _tech, k, _len), where the calculation of the bucket position is similar to the one named above. Fixes: e0e4b8fa ("net/smc: Add SMC statistics support") Suggested-by:
Halil Pasic <pasic@linux.ibm.com> Signed-off-by:
Nils Hoppmann <niho@linux.ibm.com> Reviewed-by:
Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by:
Dust Li <dust.li@linux.alibaba.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yanguo Li authored
When there are CT table entries, and you rmmod nfp, the following events can happen: task1： nfp_net_pci_remove ↓ nfp_flower_stop->(asynchronous)tcf_ct_flow_table_cleanup_work(3) ↓ nfp_zone_table_entry_destroy(1) task2： nfp_fl_ct_handle_nft_flow(2) When the execution order is (1)->(2)->(3), it will crash. Therefore, in the function nfp_fl_ct_del_flow, nf_flow_table_offload_del_cb needs to be executed synchronously. At the same time, in order to solve the deadlock problem and the problem of rtnl_lock sometimes failing, replace rtnl_lock with the private nfp_fl_lock. Fixes: 7cc93d88 ("nfp: flower-ct: remove callback delete deadlock") Cc: stable@vger.kernel.org Signed-off-by:Yanguo Li <yanguo.li@corigine.com> Signed-off-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
-
Javier Carrasco authored
syzbot has found an uninit-value bug triggered by the dm9601 driver [1]. This error happens because the variable res is not updated if the call to dm_read_shared_word returns an error. In this particular case -EPROTO was returned and res stayed uninitialized. This can be avoided by checking the return value of dm_read_shared_word and propagating the error if the read operation failed. [1] https://syzkaller.appspot.com/bug?extid=1f53a30781af65d2c955 Cc: stable@vger.kernel.org Signed-off-by:
Javier Carrasco <javier.carrasco.cruz@gmail.com> Reported-and-tested-by: syzbot+1f53a30781af65d2c955@syzkaller.appspotmail.com Acked-by:
Peter Korsgaard <peter@korsgaard.com> Fixes: d0374f4f ("USB: Davicom DM9601 usbnet driver") Link: https://lore.kernel.org/r/20231009-topic-dm9601_uninit_mdio_read-v2-1-f2fe39739b6c@gmail.comSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2023-10-11 We've added 14 non-merge commits during the last 5 day(s) which contain a total of 12 files changed, 398 insertions(+), 104 deletions(-). The main changes are: 1) Fix s390 JIT backchain issues in the trampoline code generation which previously clobbered the caller's backchain, from Ilya Leoshkevich. 2) Fix zero-size allocation warning in xsk sockets when the configured ring size was close to SIZE_MAX, from Andrew Kanner. 3) Fixes for bpf_mprog API that were found when implementing support in the ebpf-go library along with selftests, from Daniel Borkmann and Lorenz Bauer. 4) Fix riscv JIT to properly sign-extend the return register in programs. This fixes various test_progs selftests on riscv, from Björn Töpel. 5) Fix verifier log for async callback return values where the allowed range was displayed incorrectly, from David Vernet. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: s390/bpf: Fix unwinding past the trampoline s390/bpf: Fix clobbering the caller's backchain in the trampoline selftests/bpf: Add testcase for async callback return value failure bpf: Fix verifier log for async callback return values xdp: Fix zero-size allocation warning in xskq_create() riscv, bpf: Track both a0 (RISC-V ABI) and a5 (BPF) return values riscv, bpf: Sign-extend return values selftests/bpf: Make seen_tc* variable tests more robust selftests/bpf: Test query on empty mprog and pass revision into attach selftests/bpf: Adapt assert_mprog_count to always expect 0 count selftests/bpf: Test bpf_mprog query API via libbpf and raw syscall bpf: Refuse unused attributes in bpf_prog_{attach,detach} bpf: Handle bpf_mprog_query with NULL entry bpf: Fix BPF_PROG_QUERY last field check ==================== Link: https://lore.kernel.org/r/20231010223610.3984-1-daniel@iogearbox.netSigned-off-by:
-
Kory Maincent authored
A bitset without mask in a _SET request means we want exactly the bits in the bitset to be set. This works correctly for compact format but when verbose format is parsed, ethnl_update_bitset32_verbose() only sets the bits present in the request bitset but does not clear the rest. The commit 66991703 fixes this issue by clearing the whole target bitmap before we start iterating. The solution proposed brought an issue with the behavior of the mod variable. As the bitset is always cleared the old val will always differ to the new val. Fix it by adding a new temporary variable which save the state of the old bitmap. Fixes: 66991703 ("ethtool: fix application of verbose no_mask bitset") Signed-off-by:
Kory Maincent <kory.maincent@bootlin.com> Reviewed-by:
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-6.6-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2023-10-09 Lukas Magel's patch for the CAN ISO-TP protocol fixes the TX state detection and wait behavior. John Watts contributes a patch to only show the sun4i_can Kconfig option on ARCH_SUNXI. A patch by Miquel Raynal fixes the soft-reset workaround for Renesas SoCs in the sja1000 driver. Markus Schneider-Pargmann's patch for the tcan4x5x m_can glue driver fixes the id2 register for the tcan4553. 2 patches by Haibo Chen fix the flexcan stop mode for the imx93 SoC. * tag 'linux-can-fixes-for-6.6-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: tcan4x5x: Fix id2_register for tcan4553 can: flexcan: remove the auto stop mode for IMX93 can: sja1000: Always restart the Tx queue after an overrun arm64: dts: imx93: add the Flex-CAN stop mode by GPR can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior ==================== Link: https://lore.kernel.org/r/20231009085256.693378-1-mkl@pengutronix.deSigned-off-by:
-
Eric Dumazet authored
Sili Luo reported a race in nfc_llcp_sock_get(), leading to UAF. Getting a reference on the socket found in a lookup while holding a lock should happen before releasing the lock. nfc_llcp_sock_get_sn() has a similar problem. Finally nfc_llcp_recv_snl() needs to make sure the socket found by nfc_llcp_sock_from_sn() does not disappear. Fixes: 8f50020e ("NFC: LLCP late binding") Reported-by:
Sili Luo <rootlab@huawei.com> Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231009123110.3735515-1-edumazet@google.comSigned-off-by:
-
Jeremy Kerr authored
Our current route lookups (mctp_route_lookup and mctp_route_lookup_null) traverse the net's route list without the RCU read lock held. This means the route lookup is subject to preemption, resulting in an potential grace period expiry, and so an eventual kfree() while we still have the route pointer. Add the proper read-side critical section locks around the route lookups, preventing premption and a possible parallel kfree. The remaining net->mctp.routes accesses are already under a rcu_read_lock, or protected by the RTNL for updates. Based on an analysis from Sili Luo <rootlab@huawei.com>, where introducing a delay in the route lookup could cause a UAF on simultaneous sendmsg() and route deletion. Reported-by:
Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by:
-
Randy Dunlap authored
Correct punctuation and drop an extraneous word. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
-
- 10 Oct, 2023 11 commits
-
-
Ilya Leoshkevich authored
When functions called by the trampoline panic, the backtrace that is printed stops at the trampoline, because the trampoline does not store its caller's frame address (backchain) on stack; it also stores the return address at a wrong location. Store both the same way as is already done for the regular eBPF programs. Fixes: 528eb2cb ("s390/bpf: Implement arch_prepare_bpf_trampoline()") Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20231010203512.385819-3-iii@linux.ibm.com
-
Ilya Leoshkevich authored
One of the first things that s390x kernel functions do is storing the the caller's frame address (backchain) on stack. This makes unwinding possible. The backchain is always stored at frame offset 152, which is inside the 160-byte stack area, that the functions allocate for their callees. The callees must preserve the backchain; the remaining 152 bytes they may use as they please. Currently the trampoline uses all 160 bytes, clobbering the backchain. This causes kernel panics when using __builtin_return_address() in functions called by the trampoline. Fix by reducing the usage of the caller-reserved stack area by 8 bytes in the trampoline. Fixes: 528eb2cb ("s390/bpf: Implement arch_prepare_bpf_trampoline()") Reported-by:
Song Liu <song@kernel.org> Signed-off-by:
-
Will Mortensen authored
Commit 1e662209 ("net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change") seems to have accidentally inverted the logic added in commit 0bc73ad4 ("net/mlx5e: Mutually exclude RX-FCS and RX-port-timestamp"). The impact of this is a little unclear since it seems the FCS scattered with RX-FCS is (usually?) correct regardless. Fixes: 1e662209 ("net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change") Tested-by:
Charlotte Tan <charlotte@extrahop.com> Reviewed-by:
Will Mortensen <will@extrahop.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20231006053706.514618-1-will@extrahop.comSigned-off-by:
-
Gerd Bayer authored
When the SMC protocol is built into the kernel proper while ISM is configured to be built as module, linking the kernel fails due to unresolved dependencies out of net/smc/smc_ism.o to ism_get_smcd_ops, ism_register_client, and ism_unregister_client as reported via the linux-next test automation (see link). This however is a bug introduced a while ago. Correct the dependency list in ISM's and SMC's Kconfig to reflect the dependencies that are actually inverted. With this you cannot build a kernel with CONFIG_SMC=y and CONFIG_ISM=m. Either ISM needs to be 'y', too - or a 'n'. That way, SMC can still be configured on non-s390 architectures that do not have (nor need) an ISM driver. Fixes: 89e7d2ba ("net/ism: Add new API for client registration") Reported-by:
Gerd Bayer <gbayer@linux.ibm.com> Reviewed-by:
-
Dan Carpenter authored
The adapter->vf_mvs.l list needs to be initialized even if the list is empty. Otherwise it will lead to crashes. Fixes: a1cbb15c ("ixgbe: Add macvlan support for VF") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/ZSADNdIw8zFx1xw2@kadamSigned-off-by:
-
Paolo Abeni authored
Radu Pirea says: ==================== Add update_pn flag Patches extracted from https://lore.kernel.org/all/20230928084430.1882670-1-radu-nicolae.pirea@oss.nxp.com/ Update_pn flag will let the offloaded MACsec implementations to know when the PN is updated. ==================== Link: https://lore.kernel.org/r/20231005180636.672791-1-radu-nicolae.pirea@oss.nxp.comSigned-off-by:
-
Radu Pirea (NXP OSS) authored
When updating the SA, use the new update_pn flags instead of comparing the new PN with the initial one. Comparing the initial PN value with the new value will allow the user to update the SA using the initial PN value as a parameter like this: $ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \ ead3664f508eb06c40ac7104cdae4ce5 $ ip macsec set macsec0 tx sa 0 pn 1 off Fixes: 8ff0ac5b ("net/mlx5: Add MACsec offload Tx command support") Fixes: aae3454e ("net/mlx5e: Add MACsec offload Rx command support") Signed-off-by:
Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Radu Pirea (NXP OSS) authored
Updating the PN is not supported. Return -EINVAL if update_pn is true. The following command succeeded, but it should fail because the driver does not update the PN: ip macsec set macsec0 tx sa 0 pn 232 on Fixes: 28c5107a ("net: phy: mscc: macsec support") Signed-off-by:
-
Radu Pirea (NXP OSS) authored
When updating SA, update the PN only when the update_pn flag is true. Otherwise, the PN will be reset to its previous value using the following command and this should not happen: $ ip macsec set macsec0 tx sa 0 on Fixes: c54ffc73 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by:
-
Radu Pirea (NXP OSS) authored
Indicate next PN update using update_pn flag in macsec_context. Offloaded MACsec implementations does not know whether or not the MACSEC_SA_ATTR_PN attribute was passed for an SA update and assume that next PN should always updated, but this is not always true. The PN can be reset to its initial value using the following command: $ ip macsec set macsec0 tx sa 0 off #octeontx2-pf case Or, the update PN command will succeed even if the driver does not support PN updates. $ ip macsec set macsec0 tx sa 0 pn 1 on #mscc phy driver case Comparing the initial PN with the new PN value is not a solution. When the user updates the PN using its initial value the command will succeed, even if the driver does not support it. Like this: $ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \ ead3664f508eb06c40ac7104cdae4ce5 $ ip macsec set macsec0 tx sa 0 pn 1 on #mlx5 case Signed-off-by:
-
Eric Dumazet authored
syzbot uses panic_on_warn. This means that the skb_dump() I added in the blamed commit are not even called. Rewrite this so that we get the needed skb dump before syzbot crashes. Fixes: eeee4b77 ("net: add more debug info in skb_checksum_help()") Signed-off-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
-
- 09 Oct, 2023 5 commits
-
-
David Vernet authored
A previous commit updated the verifier to print an accurate failure message for when someone specifies a nonzero return value from an async callback. This adds a testcase for validating that the verifier emits the correct message in such a case. Signed-off-by:
David Vernet <void@manifault.com> Signed-off-by:
-
David Vernet authored
The verifier, as part of check_return_code(), verifies that async callbacks such as from e.g. timers, will return 0. It does this by correctly checking that R0->var_off is in tnum_const(0), which effectively checks that it's in a range of 0. If this condition fails, however, it prints an error message which says that the value should have been in (0x0; 0x1). This results in possibly confusing output such as the following in which an async callback returns 1: At async callback the register R0 has value (0x1; 0x0) should have been in (0x0; 0x1) The fix is easy -- we should just pass the tnum_const(0) as the correct range to verbose_invalid_scalar(), which will then print the following: At async callback the register R0 has value (0x1; 0x0) should have been in (0x0; 0x0) Fixes: bfc6bb74 ("bpf: Implement verifier support for validation of async callbacks.") Signed-off-by:
-
Andrew Kanner authored
Syzkaller reported the following issue: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2807 at mm/vmalloc.c:3247 __vmalloc_node_range (mm/vmalloc.c:3361) Modules linked in: CPU: 0 PID: 2807 Comm: repro Not tainted 6.6.0-rc2+ #12 Hardware name: Generic DT based system unwind_backtrace from show_stack (arch/arm/kernel/traps.c:258) show_stack from dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1)) dump_stack_lvl from __warn (kernel/panic.c:633 kernel/panic.c:680) __warn from warn_slowpath_fmt (./include/linux/context_tracking.h:153 kernel/panic.c:700) warn_slowpath_fmt from __vmalloc_node_range (mm/vmalloc.c:3361 (discriminator 3)) __vmalloc_node_range from vmalloc_user (mm/vmalloc.c:3478) vmalloc_user from xskq_create (net/xdp/xsk_queue.c:40) xskq_create from xsk_setsockopt (net/xdp/xsk.c:953 net/xdp/xsk.c:1286) xsk_setsockopt from __sys_setsockopt (net/socket.c:2308) __sys_setsockopt from ret_fast_syscall (arch/arm/kernel/entry-common.S:68) xskq_get_ring_size() uses struct_size() macro to safely calculate the size of struct xsk_queue and q->nentries of desc members. But the syzkaller repro was able to set q->nentries with the value initially taken from copy_from_sockptr() high enough to return SIZE_MAX by struct_size(). The next PAGE_ALIGN(size) is such case will overflow the size_t value and set it to 0. This will trigger WARN_ON_ONCE in vmalloc_user() -> __vmalloc_node_range(). The issue is reproducible on 32-bit arm kernel. Fixes: 9f78bf33 ("xsk: support use vaddr as ring") Reported-by: syzbot+fae676d3cf469331fc89@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000c84b4705fb31741e@google.com/T/ Reported-by: syzbot+b132693e925cbbd89e26@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000e20df20606ebab4f@google.com/T/Signed-off-by:
Andrew Kanner <andrew.kanner@gmail.com> Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Link: https://syzkaller.appspot.com/bug?extid=fae676d3cf469331fc89 Link: https://lore.kernel.org/bpf/20231007075148.1759-1-andrew.kanner@gmail.com
-
Björn Töpel authored
The RISC-V BPF uses a5 for BPF return values, which are zero-extended, whereas the RISC-V ABI uses a0 which is sign-extended. In other words, a5 and a0 can differ, and are used in different context. The BPF trampoline are used for both BPF programs, and regular kernel functions. Make sure that the RISC-V BPF trampoline saves, and restores both a0 and a5. Fixes: 49b5e77a ("riscv, bpf: Add bpf trampoline support for RV64") Signed-off-by:
Björn Töpel <bjorn@rivosinc.com> Signed-off-by:
-
Björn Töpel authored
The RISC-V architecture does not expose sub-registers, and hold all 32-bit values in a sign-extended format [1] [2]: | The compiler and calling convention maintain an invariant that all | 32-bit values are held in a sign-extended format in 64-bit | registers. Even 32-bit unsigned integers extend bit 31 into bits | 63 through 32. Consequently, conversion between unsigned and | signed 32-bit integers is a no-op, as is conversion from a signed | 32-bit integer to a signed 64-bit integer. While BPF, on the other hand, exposes sub-registers, and use zero-extension (similar to arm64/x86). This has led to some subtle bugs, where a BPF JITted program has not sign-extended the a0 register (return value in RISC-V land), passed the return value up the kernel, e.g.: | int from_bpf(void); | | long foo(void) | { | return from_bpf(); | } Here, a0 would be 0xffff_ffff, instead of the expected 0xffff_ffff_ffff_ffff. Internally, the RISC-V JIT uses a5 as a dedicated register for BPF return values. Keep a5 zero-extended, but explicitly sign-extend a0 (which is used outside BPF land). Now that a0 (RISC-V ABI) and a5 (BPF ABI) differs, a0 is only moved to a5 for non-BPF native calls (BPF_PSEUDO_CALL). Fixes: 2353ecc6 ("bpf, riscv: add BPF JIT for RV64G") Signed-off-by:
-
- 08 Oct, 2023 3 commits
-
-
Michal Swiatkowski authored
When one of the LAG interfaces is in switchdev mode, setting default rule can't be done. The interface on which switchdev is running has ice_set_rx_mode() blocked to avoid default rule adding (and other rules). The other interfaces (without switchdev running but connected via bond with interface that runs switchdev) can't follow the same scheme, because rx filtering needs to be disabled when failover happens. Notification for bridge to set promisc mode seems like good place to do that. Fixes: bb52f42a ("ice: Add driver support for firmware changes for LAG") Signed-off-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by:
Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by:
Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
-
Roger Pau Monne authored
Do not set netback interfaces (vifs) default TX queue size to the ring size. The TX queue size is not related to the ring size, and using the ring size (32) as the queue size can lead to packet drops. Note the TX side of the vif interface in the netback domain is the one receiving packets to be injected to the guest. Do not explicitly set the TX queue length to any value when creating the interface, and instead use the system default. Note that the queue length can also be adjusted at runtime. Fixes: f942dc25 ('xen network backend driver') Signed-off-by:
Roger Pau Monné <roger.pau@citrix.com> Reviewed-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by:
Wei Liu <wei.liu@kernel.org> Signed-off-by:
-
Dan Carpenter authored
The mlxsw_sp2_nve_vxlan_learning_set() function is supposed to return zero on success or negative error codes. So it needs to be type int instead of bool. Fixes: 4ee70efa ("mlxsw: spectrum_nve: Add support for VXLAN on Spectrum-2") Signed-off-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
- 07 Oct, 2023 1 commit
-
-
Dinghao Liu authored
If of_clk_add_provider() fails in ca8210_register_ext_clock(), it calls clk_unregister() to release priv->clk and returns an error. However, the caller ca8210_probe() then calls ca8210_remove(), where priv->clk is freed again in ca8210_unregister_ext_clock(). In this case, a use-after-free may happen in the second time we call clk_unregister(). Fix this by removing the first clk_unregister(). Also, priv->clk could be an error code on failure of clk_register_fixed_rate(). Use IS_ERR_OR_NULL to catch this case in ca8210_unregister_ext_clock(). Fixes: ded845a7 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Message-ID: <20231007033049.22353-1-dinghao.liu@zju.edu.cn> Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org>
-
