- 25 Jun, 2019 35 commits
-
-
Scott Wood authored
[ Upstream commit 13069847 ] dma_mapping_error() was being called on a different device struct than what was passed to map/unmap. Besides rendering the error checking ineffective, it caused a debug splat with CONFIG_DMA_API_DEBUG. Signed-off-by:
Scott Wood <swood@redhat.com> Acked-by:
Wu Hao <hao.wu@intel.com> Acked-by:
Moritz Fischer <mdf@kernel.org> Acked-by:
Alan Tull <atull@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jose Abreu authored
[ Upstream commit 4c70850a ] Add the binding for RX/TX fifo size of GMAC node. Cc: Joao Pinto <jpinto@synopsys.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Tested-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Acked-by:
Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Jose Abreu authored
[ Upstream commit ecc906a1 ] GMAC controller on HSDK boards supports 256 Hash Table size so we need to add the multicast filter bins property. This allows for the Hash filter to work properly using stmmac driver. Cc: Joao Pinto <jpinto@synopsys.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Acked-by:
-
Eric Long authored
[ Upstream commit 89d03b3c ] The maximum value of block length is 0xffff, so if the configured transfer length is more than 0xffff, that will cause block length overflow to lead a configuration error. Thus we can set block length as the maximum burst length to avoid this issue, since the maximum burst length will not be a big value which is more than 0xffff. Signed-off-by:
Eric Long <eric.long@unisoc.com> Signed-off-by:
Baolin Wang <baolin.wang@linaro.org> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 0788611c ] In the unlikely event that axi_desc_get returns a null desc in the very first iteration of the while-loop the error exit path ends up calling axi_desc_put on a null pointer 'first' and this causes a null pointer dereference. Fix this by adding a null check on pointer 'first' before calling axi_desc_put. Addresses-Coverity: ("Explicit null dereference") Fixes: 1fe20f1b ("dmaengine: Introduce DW AXI DMAC driver") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Vineet Gupta authored
[ Upstream commit 89c92142 ] | arch/arc/mm/tlb.c:914:2: warning: variable length array 'pd0' is used [-Wvla] | arch/arc/include/asm/cmpxchg.h:95:29: warning: value computed is not used [-Wunused-value] Signed-off-by:
-
Douglas Anderson authored
commit 65dade60 upstream. When Broadcom SDIO cards are idled they go to sleep and a whole separate subsystem takes over their SDIO communication. This is the Always-On-Subsystem (AOS) and it can't handle tuning requests. Specifically, as tested on rk3288-veyron-minnie (which reports having BCM4354/1 in dmesg), if I force a retune in brcmf_sdio_kso_control() when "on = 1" (aka we're transition from sleep to wake) by whacking: bus->sdiodev->func1->card->host->need_retune = 1 ...then I can often see tuning fail. In this case dw_mmc reports "All phases bad!"). Note that I don't get 100% failure, presumably because sometimes the card itself has already transitioned away from the AOS itself by the time we try to wake it up. If I force retuning when "on = 0" (AKA force retuning right before sending the command to go to sleep) then retuning is always OK. NOTE: we need _both_ this patch and the patch to avoid triggering tuning due to CRC errors in the sleep/wake transition, AKA ("brcmfmac: sdio: Disable auto-tuning around commands expected to fail"). Though both patches handle issues with Broadcom's AOS, the problems are distinct: 1. We want to defer (but not ignore) asynchronous (like timer-requested) tuning requests till the card is awake. However, we want to ignore CRC errors during the transition, we don't want to queue deferred tuning request. 2. You could imagine that the AOS could implement retuning but we could still get errors while transitioning in and out of the AOS. Similarly you could imagine a seamless transition into and out of the AOS (with no CRC errors) even if the AOS couldn't handle tuning. ALSO NOTE: presumably there is never a desperate need to retune in order to wake up the card, since doing so is impossible. Luckily the only way the card can get into sleep state is if we had a good enough tuning to send it the command to put it into sleep, so presumably that "good enough" tuning is enough to wake us up, at least with a few retries. Cc: stable@vger.kernel.org #v4.18+ Signed-off-by:
Douglas Anderson <dianders@chromium.org> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Reviewed-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Acked-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Douglas Anderson authored
commit 2de0b42d upstream. There are certain cases, notably when transitioning between sleep and active state, when Broadcom SDIO WiFi cards will produce errors on the SDIO bus. This is evident from the source code where you can see that we try commands in a loop until we either get success or we've tried too many times. The comment in the code reinforces this by saying "just one write attempt may fail" Unfortunately these failures sometimes end up causing an "-EILSEQ" back to the core which triggers a retuning of the SDIO card and that blocks all traffic to the card until it's done. Let's disable retuning around the commands we expect might fail. Cc: stable@vger.kernel.org #v4.18+ Signed-off-by:
-
Jann Horn authored
commit 8404d7a6 upstream. A packed AppArmor policy contains null-terminated tag strings that are read by unpack_nameX(). However, unpack_nameX() uses string functions on them without ensuring that they are actually null-terminated, potentially leading to out-of-bounds accesses. Make sure that the tag string is null-terminated before passing it to strcmp(). Cc: stable@vger.kernel.org Fixes: 736ec752 ("AppArmor: policy routines for loading and unpacking policy") Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
John Johansen <john.johansen@canonical.com> Signed-off-by:
-
John Johansen authored
commit 23375b13 upstream. While commit 11c236b8 ("apparmor: add a default null dfa") ensure every profile has a policy.dfa it does not resize the policy.start[] to have entries for every possible start value. Which means PROFILE_MEDIATES is not safe to use on untrusted input. Unforunately commit b9590ad4 ("apparmor: remove POLICY_MEDIATES_SAFE") did not take into account the start value usage. The input string in profile_query_cb() is user controlled and is not properly checked to be within the limited start[] entries, even worse it can't be as userspace policy is allowed to make us of entries types the kernel does not know about. This mean usespace can currently cause the kernel to access memory up to 240 entries beyond the start array bounds. Cc: stable@vger.kernel.org Fixes: b9590ad4 ("apparmor: remove POLICY_MEDIATES_SAFE") Signed-off-by:
-
Daniel Smith authored
commit 0e658060 upstream. On Chuwi Hi10 Plus, the Silead device id is MSSL0017. Signed-off-by:
Daniel Smith <danct12@disroot.org> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Andrey Smirnov authored
commit 7c7da40d upstream. In the case of compat syscall ioctl numbers for UI_BEGIN_FF_UPLOAD and UI_END_FF_UPLOAD need to be adjusted before being passed on uinput_ioctl_handler() since code built with -m32 will be passing slightly different values. Extend the code already covering UI_SET_PHYS to cover UI_BEGIN_FF_UPLOAD and UI_END_FF_UPLOAD as well. Reported-by:
Pierre-Loup A. Griffais <pgriffais@valvesoftware.com> Signed-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Alexander Mikhaylenko authored
commit 9843f3e0 upstream. They are capable of using intertouch and it works well with psmouse.synaptics_intertouch=1, so add them to the list. Without it, scrolling and gestures are jumpy, three-finger pinch gesture doesn't work and three- or four-finger swipes sometimes get stuck. Signed-off-by:
Alexander Mikhaylenko <exalm7659@gmail.com> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Crt Mori authored
commit 389fc70b upstream. Register EE_VERSION contains mixture of calibration information and DSP version. So far, because calibrations were definite, the driver compatibility depended on whole contents, but in the newer production process the calibration part changes. Because of that, value in EE_VERSION will be changed and to avoid that calibration value is same as DSP version the MSB in calibration part was fixed to 1. That means existing calibrations (medical and consumer) will now have hex values (bits 8 to 15) of 83 and 84 respectively. Driver compatibility should be based only on DSP version part of the EE_VERSION (bits 0 to 7) register. Signed-off-by:
Crt Mori <cmo@melexis.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Mike Marciniszyn authored
commit 3230f4a8 upstream. The following warning can happen when a memory shortage occurs during txreq allocation: [10220.939246] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC) [10220.939246] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/2016 [10220.939247] cache: mnt_cache, object size: 384, buffer size: 384, default order: 2, min order: 0 [10220.939260] Workqueue: hfi0_0 _hfi1_do_send [hfi1] [10220.939261] node 0: slabs: 1026568, objs: 43115856, free: 0 [10220.939262] Call Trace: [10220.939262] node 1: slabs: 820872, objs: 34476624, free: 0 [10220.939263] dump_stack+0x5a/0x73 [10220.939265] warn_alloc+0x103/0x190 [10220.939267] ? wake_all_kswapds+0x54/0x8b [10220.939268] __alloc_pages_slowpath+0x86c/0xa2e [10220.939270] ? __alloc_pages_nodemask+0x2fe/0x320 [10220.939271] __alloc_pages_nodemask+0x2fe/0x320 [10220.939273] new_slab+0x475/0x550 [10220.939275] ___slab_alloc+0x36c/0x520 [10220.939287] ? hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939299] ? __get_txreq+0x54/0x160 [hfi1] [10220.939310] ? hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939312] __slab_alloc+0x40/0x61 [10220.939323] ? hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939325] kmem_cache_alloc+0x181/0x1b0 [10220.939336] hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939348] ? hfi1_verbs_send_dma+0x386/0xa10 [hfi1] [10220.939359] ? find_prev_entry+0xb0/0xb0 [hfi1] [10220.939371] hfi1_do_send+0x1d9/0x3f0 [hfi1] [10220.939372] process_one_work+0x171/0x380 [10220.939374] worker_thread+0x49/0x3f0 [10220.939375] kthread+0xf8/0x130 [10220.939377] ? max_active_store+0x80/0x80 [10220.939378] ? kthread_bind+0x10/0x10 [10220.939379] ret_from_fork+0x35/0x40 [10220.939381] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC) The shortage is handled properly so the message isn't needed. Silence by adding the no warn option to the slab allocation. Fixes: 45842abb ("staging/rdma/hfi1: move txreq header code") Cc: <stable@vger.kernel.org> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Kaike Wan authored
commit 5f90677e upstream. The opcode range for fault injection from user should be validated before it is applied to the fault->opcodes[] bitmap to avoid out-of-bound error. Cc: <stable@vger.kernel.org> Fixes: a74d5307 ("IB/hfi1: Rework fault injection machinery") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Mathias Nyman authored
commit b8c3b718 upstream. A USB3 device needs to be reset and re-enumarated if the port it connects to goes to a error state, with link state inactive. There is no use in trying to recover failed transactions by resetting endpoints at this stage. Tests show that in rare cases, after multiple endpoint resets of a roothub port the whole host controller might stop completely. Several retries to recover from transaction error can happen as it can take a long time before the hub thread discovers the USB3 port error and inactive link. We can't reliably detect the port error from slot or endpoint context due to a limitation in xhci, see xhci specs section 4.8.3: "There are several cases where the EP State field in the Output Endpoint Context may not reflect the current state of an endpoint" and "Software should maintain an accurate value for EP State, by tracking it with an internal variable that is driven by Events and Doorbell accesses" Same appears to be true for slot state. set a flag to the corresponding slot if a USB3 roothub port link goes inactive to prevent both queueing new URBs and resetting endpoints. Reported-by:
Rapolu Chiranjeevi <chiranjeevi.rapolu@intel.com> Tested-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
commit ddd57980 upstream. USB 3.2 capability in a host can be detected from the xHCI Supported Protocol Capability major and minor revision fields. If major is 0x3 and minor 0x20 then the host is USB 3.2 capable. For USB 3.2 capable hosts set the root hub lane count to 2. The Major Revision and Minor Revision fields contain a BCD version number. The value of the Major Revision field is JJh and the value of the Minor Revision field is MNh for version JJ.M.N, where JJ = major revision number, M - minor version number, N = sub-minor version number, e.g. version 3.1 is represented with a value of 0310h. Also fix the extra whitespace printed out when announcing regular SuperSpeed hosts. Cc: <stable@vger.kernel.org> # v4.18+ Signed-off-by:
-
Peter Chen authored
commit c19dffc0 upstream. An endpoint conflict occurs when the USB is working in device mode during an isochronous communication. When the endpointA IN direction is an isochronous IN endpoint, and the host sends an IN token to endpointA on another device, then the OUT transaction may be missed regardless the OUT endpoint number. Generally, this occurs when the device is connected to the host through a hub and other devices are connected to the same hub. The affected OUT endpoint can be either control, bulk, isochronous, or an interrupt endpoint. After the OUT endpoint is primed, if an IN token to the same endpoint number on another device is received, then the OUT endpoint may be unprimed (cannot be detected by software), which causes this endpoint to no longer respond to the host OUT token, and thus, no corresponding interrupt occurs. There is no good workaround for this issue, the only thing the software could do is numbering isochronous IN from the highest endpoint since we have observed most of device number endpoint from the lowest. Cc: <stable@vger.kernel.org> #v3.14+ Cc: Fabio Estevam <festevam@gmail.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Jun Li <jun.li@nxp.com> Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Stanley Chu authored
commit 24e2e7a1 upstream. UFS runtime suspend can be triggered after pm_runtime_enable() is invoked in ufshcd_pltfrm_init(). However if the first runtime suspend is triggered before binding ufs_hba structure to ufs device structure via platform_set_drvdata(), then UFS runtime suspend will be no longer triggered in the future because its dev->power.runtime_error was set in the first triggering and does not have any chance to be cleared. To be more clear, dev->power.runtime_error is set if hba is NULL in ufshcd_runtime_suspend() which returns -EINVAL to rpm_callback() where dev->power.runtime_error is set as -EINVAL. In this case, any future rpm_suspend() for UFS device fails because rpm_check_suspend_allowed() fails due to non-zero dev->power.runtime_error. To resolve this issue, make sure the first UFS runtime suspend get valid "hba" in ufshcd_runtime_suspend(): Enable UFS runtime PM only after hba is successfully bound to UFS device structure. Fixes: 62694735 ([SCSI] ufs: Add runtime PM support for UFS host controller driver) Cc: stable@vger.kernel.org Signed-off-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Ulf Hansson authored
commit 83293386 upstream. Processing of SDIO IRQs must obviously be prevented while the card is system suspended, otherwise we may end up trying to communicate with an uninitialized SDIO card. Reports throughout the years shows that this is not only a theoretical problem, but a real issue. So, let's finally fix this problem, by keeping track of the state for the card and bail out before processing the SDIO IRQ, in case the card is suspended. Cc: stable@vger.kernel.org Reported-by:
-
Douglas Anderson authored
commit b4c9f938 upstream. We want SDIO drivers to be able to temporarily stop retuning when the driver knows that the SDIO card is not in a state where retuning will work (maybe because the card is asleep). We'll move the relevant functions to a place where drivers can call them. Cc: stable@vger.kernel.org #v4.18+ Signed-off-by:
-
Douglas Anderson authored
commit 0a55f4ab upstream. Normally when the MMC core sees an "-EILSEQ" error returned by a host controller then it will trigger a retuning of the card. This is generally a good idea. However, if a command is expected to sometimes cause transfer errors then these transfer errors shouldn't cause a re-tuning. This re-tuning will be a needless waste of time. One example case where a transfer is expected to cause errors is when transitioning between idle (sometimes referred to as "sleep" in Broadcom code) and active state on certain Broadcom WiFi SDIO cards. Specifically if the card was already transitioning between states when the command was sent it could cause an error on the SDIO bus. Let's add an API that the SDIO function drivers can call that will temporarily disable the auto-tuning functionality. Then we can add a call to this in the Broadcom WiFi driver and any other driver that might have similar needs. NOTE: this makes the assumption that the card is already tuned well enough that it's OK to disable the auto-retuning during one of these error-prone situations. Presumably the driver code performing the error-prone transfer knows how to recover / retry from errors. ...and after we can get back to a state where transfers are no longer error-prone then we can enable the auto-retuning again. If we truly find ourselves in a case where the card needs to be retuned sometimes to handle one of these error-prone transfers then we can always try a few transfers first without auto-retuning and then re-try with auto-retuning if the first few fail. Without this change on rk3288-veyron-minnie I periodically see this in the logs of a machine just sitting there idle: dwmmc_rockchip ff0d0000.dwmmc: Successfully tuned phase to XYZ Cc: stable@vger.kernel.org #v4.18+ Signed-off-by:
-
Raul E Rangel authored
commit 0f7b79a4 upstream. The O2Micro controller only supports tuning at 4-bits. So the host driver needs to change the bus width while tuning and then set it back when done. There was a bug in the original implementation in that mmc->ios.bus_width also wasn't updated. Thus setting the incorrect blocksize in sdhci_send_tuning which results in a tuning failure. Signed-off-by:
Raul E Rangel <rrangel@chromium.org> Fixes: 0086fc21 ("mmc: sdhci: Add support for O2 hardware tuning") Acked-by:
-
Harald Freudenberger authored
[ Upstream commit 159491f3 ] The inline assembler functions ap_aqic() and ap_qact() used two variables declared on the very same register. One variable was for input only, the other for output. Looks like newer versions of the gcc don't like this. Anyway it is a better coding to use one variable (which may have a union data type) on one register for input and output. So this patch introduces unions and uses only one variable now for input and output for GR1 for the PQAP(QACT) and PQAP(QIC) invocation. Signed-off-by:
Harald Freudenberger <freude@linux.ibm.com> Acked-by:
Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Ilya Leoshkevich authored
[ Upstream commit 14644852 ] [heiko.carstens@de.ibm.com]: ----- Laura Abbott reported that the kernel doesn't build anymore with gcc 9, due to the "X" constraint. Ilya provided the gcc 9 patch "S/390: Introduce jdd constraint" which introduces the new "jdd" constraint which fixes this. ----- The support for section anchors on S/390 introduced in gcc9 has changed the behavior of "X" constraint, which can now produce register references. Since existing constraints, in particular, "i", do not fit the intended use case on S/390, the new machine-specific "jdd" constraint was introduced. This patch makes jump labels use "jdd" constraint when building with gcc9. Reported-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 1dac6f5b ] gcc gets a bit confused by the logic in ovl_setup_trap() and can't figure out whether the local 'trap' variable in the caller was initialized or not: fs/overlayfs/super.c: In function 'ovl_fill_super': fs/overlayfs/super.c:1333:4: error: 'trap' may be used uninitialized in this function [-Werror=maybe-uninitialized] iput(trap); ^~~~~~~~~~ fs/overlayfs/super.c:1312:17: note: 'trap' was declared here Reword slightly to make it easier for the compiler to understand. Fixes: 146d62e5 ("ovl: detect overlapping layers") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Miklos Szeredi authored
[ Upstream commit 9179c21d ] NFS mounts can be disconnected from fs root. Don't fail the overlapping layer check because of this. The check is not authoritative anyway, since topology can change during or after the check. Reported-by:
Antti Antinoja <antti@fennosys.fi> Signed-off-by:
-
Amir Goldstein authored
[ Upstream commit 146d62e5 ] Overlapping overlay layers are not supported and can cause unexpected behavior, but overlayfs does not currently check or warn about these configurations. User is not supposed to specify the same directory for upper and lower dirs or for different lower layers and user is not supposed to specify directories that are descendants of each other for overlay layers, but that is exactly what this zysbot repro did: https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000 Moving layer root directories into other layers while overlayfs is mounted could also result in unexpected behavior. This commit places "traps" in the overlay inode hash table. Those traps are dummy overlay inodes that are hashed by the layers root inodes. On mount, the hash table trap entries are used to verify that overlay layers are not overlapping. While at it, we also verify that overlay layers are not overlapping with directories "in-use" by other overlay instances as upperdir/workdir. On lookup, the trap entries are used to verify that overlay layers root inodes have not been moved into other layers after mount. Some examples: $ ./run --ov --samefs -s ... ( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt mount -o bind base/lower lower mount -o bind base/upper upper mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w) $ umount mnt $ mount -t overlay none mnt ... -o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w [ 94.434900] overlayfs: overlapping upperdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w [ 151.350132] overlayfs: conflicting lowerdir path mount: none is already mounted or mnt busy $ mount -t overlay none mnt ... -o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w [ 201.205045] overlayfs: overlapping lowerdir path mount: mount overlay on mnt failed: Too many levels of symbolic links $ mount -t overlay none mnt ... -o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w $ mv base/upper/0/ base/lower/ $ find mnt/0 mnt/0 mnt/0/w find: 'mnt/0/w/work': Too many levels of symbolic links find: 'mnt/0/u': Too many levels of symbolic links Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
-
Amir Goldstein authored
[ Upstream commit 6dde1e42 ] Relax the condition that overlayfs supports nfs export, to require that i_ino is consistent with st_ino/d_ino. It is enough to require that st_ino and d_ino are consistent. This fixes the failure of xfstest generic/504, due to mismatch of st_ino to inode number in the output of /proc/locks. Fixes: 12574a9f ("ovl: consistent i_ino for non-samefs with xino") Cc: <stable@vger.kernel.org> # v4.19 Signed-off-by:
-
Amir Goldstein authored
[ Upstream commit 941d935a ] The ioctl argument was parsed as the wrong type. Fixes: b21d9c43 ("ovl: support the FS_IOC_FS[SG]ETXATTR ioctls") Signed-off-by:
-
Amir Goldstein authored
[ Upstream commit b21d9c43 ] They are the extended version of FS_IOC_FS[SG]ETFLAGS ioctls. xfs_io -c "chattr <flags>" uses the new ioctls for setting flags. This used to work in kernel pre v4.19, before stacked file ops introduced the ovl_ioctl whitelist. Reported-by:
Dave Chinner <david@fromorbit.com> Fixes: d1d04ef8 ("ovl: stack file ops") Cc: <stable@vger.kernel.org> # v4.19 Signed-off-by:
-
Linus Torvalds authored
commit 6f303d60 upstream. We already did this for clang, but now gcc has that warning too. Yes, yes, the address may be unaligned. And that's kind of the point. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Allan Xavier authored
commit 4a60aa05 upstream. Add support for processing switch jump tables in objects with multiple .rodata sections, such as those created by '-ffunction-sections' and '-fdata-sections'. Currently, objtool always looks in .rodata for jump table information, which results in many "sibling call from callable instruction with modified stack frame" warnings with objects compiled using those flags. The fix is comprised of three parts: 1. Flagging all .rodata sections when importing ELF information for easier checking later. 2. Keeping a reference to the section each relocation is from in order to get the list_head for the other relocations in that section. 3. Finding jump tables by following relocations to .rodata sections, rather than always referencing a single global .rodata section. The patch has been tested without data sections enabled and no differences in the resulting orc unwind information were seen. Note that as objtool adds terminators to end of each .text section the unwind information generated between a function+data sections build and a normal build aren't directly comparable. Manual inspection suggests that objtool is now generating the correct information, or at least making more of an effort to do so than it did previously. Signed-off-by:
Allan Xavier <allan.x.xavier@oracle.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/099bdc375195c490dda04db777ee0b95d566ded1.1536325914.git.jpoimboe@redhat.comSigned-off-by:
-
Miguel Ojeda authored
commit 0c97bf86 upstream. Starting with GCC 9, -Warray-bounds detects cases when memset is called starting on a member of a struct but the size to be cleared ends up writing over further members. Such a call happens in the trace code to clear, at once, all members after and including `seq` on struct trace_iterator: In function 'memset', inlined from 'ftrace_dump' at kernel/trace/trace.c:8914:3: ./include/linux/string.h:344:9: warning: '__builtin_memset' offset [8505, 8560] from the object at 'iter' is out of the bounds of referenced subobject 'seq' with type 'struct trace_seq' at offset 4368 [-Warray-bounds] 344 | return __builtin_memset(p, c, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ In order to avoid GCC complaining about it, we compute the address ourselves by adding the offsetof distance instead of referring directly to the member. Since there are two places doing this clear (trace.c and trace_kdb.c), take the chance to move the workaround into a single place in the internal header. Link: http://lkml.kernel.org/r/20190523124535.GA12931@gmail.comSigned-off-by:
Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [ Removed unnecessary parenthesis around "iter" ] Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
- 22 Jun, 2019 5 commits
-
-
Greg Kroah-Hartman authored
-
Eric Dumazet authored
commit b6653b36 upstream. tcp_fragment() might be called for skbs in the write queue. Memory limits might have been exceeded because tcp_sendmsg() only checks limits at full skb (64KB) boundaries. Therefore, we need to make sure tcp_fragment() wont punish applications that might have setup very low SO_SNDBUF values. Fixes: f070ef2a ("tcp: tcp_fragment() should apply sane memory limits") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Christoph Paasch <cpaasch@apple.com> Tested-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Greg Kroah-Hartman authored
-
Alexander Lochmann authored
commit f69e749a upstream. file_remove_privs() might be called for non-regular files, e.g. blkdev inode. There is no reason to do its job on things like blkdev inodes, pipes, or cdevs. Hence, abort if file does not refer to a regular inode. AV: more to the point, for devices there might be any number of inodes refering to given device. Which one to strip the permissions from, even if that made any sense in the first place? All of them will be observed with contents modified, after all. Found by LockDoc (Alexander Lochmann, Horst Schirmeier and Olaf Spinczyk) Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Alexander Lochmann <alexander.lochmann@tu-dortmund.de> Signed-off-by:
Horst Schirmeier <horst.schirmeier@tu-dortmund.de> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Zubin Mithra <zsm@chromium.org> Signed-off-by:
-
Andrea Arcangeli authored
commit 59ea6d06 upstream. When fixing the race conditions between the coredump and the mmap_sem holders outside the context of the process, we focused on mmget_not_zero()/get_task_mm() callers in 04f5866e ("coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping"), but those aren't the only cases where the mmap_sem can be taken outside of the context of the process as Michal Hocko noticed while backporting that commit to older -stable kernels. If mmgrab() is called in the context of the process, but then the mm_count reference is transferred outside the context of the process, that can also be a problem if the mmap_sem has to be taken for writing through that mm_count reference. khugepaged registration calls mmgrab() in the context of the process, but the mmap_sem for writing is taken later in the context of the khugepaged kernel thread. collapse_huge_page() after taking the mmap_sem for writing doesn't modify any vma, so it's not obvious that it could cause a problem to the coredump, but it happens to modify the pmd in a way that breaks an invariant that pmd_trans_huge_lock() relies upon. collapse_huge_page() needs the mmap_sem for writing just to block concurrent page faults that call pmd_trans_huge_lock(). Specifically the invariant that "!pmd_trans_huge()" cannot become a "pmd_trans_huge()" doesn't hold while collapse_huge_page() runs. The coredump will call __get_user_pages() without mmap_sem for reading, which eventually can invoke a lockless page fault which will need a functional pmd_trans_huge_lock(). So collapse_huge_page() needs to use mmget_still_valid() to check it's not running concurrently with the coredump... as long as the coredump can invoke page faults without holding the mmap_sem for reading. This has "Fixes: khugepaged" to facilitate backporting, but in my view it's more a bug in the coredump code that will eventually have to be rewritten to stop invoking page faults without the mmap_sem for reading. So the long term plan is still to drop all mmget_still_valid(). Link: http://lkml.kernel.org/r/20190607161558.32104-1-aarcange@redhat.com Fixes: ba76149f ("thp: khugepaged") Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Reported-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
