- 18 Nov, 2016 4 commits
-
-
Maarten Lankhorst authored
Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-12-git-send-email-maarten.lankhorst@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #irc
-
Chris Wilson authored
Since we can retire requests from multiple paths, we cannot assume that i915_gem_retire_requests() is the sole path on which we can transition to gt.active_requests == 0. A consequence of this is that we would skip the function if we had already retired all the requests and not scheduled the idle worker. This is fallout from changing the routine from considering active_engines (for which it was the only consumer) to active_requests. v2: Move kicking the idle working to i915_gem_request_retire() otherwise we could postpone the idle callback everytime we called retire_requests even though we did no work. v3: We only need to move the idle work kicking! v4: Drop the BUG_ON(!awake) as we may be called from the shrinker in the middle of constructing a request before we have marked the device awake. v5: Add a BUG_ON() for active_requests underflow upon retirement (Joonas) Fixes: 28176ef4 ("drm/i915: Reserve space in the global seqno during request allocation") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161115164620.17185-1-chris@chris-wilson.co.ukReviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
I tried to avoid having to track the write for every VMA by only tracking writes to the ggtt. However, for the purposes of frontbuffer tracking this is insufficient as we need to invalidate around writes not just to the the ggtt but all aliased ppgtt views of the framebuffer. By moving the critical section to the object and only doing so for framebuffer writes we can reduce the tracking even further by only watching framebuffers and not vma. Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
-
Tvrtko Ursulin authored
Otherwise it is just an useless empty line. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Suggested-by:
-
- 17 Nov, 2016 36 commits
-
-
Matthew Auld authored
We need to clean up the global_timeline in i915_gem_load_cleanup. v2: don't forget about the struct_mutex, and also WARN_ON if we have any remaining timelines before purging the global_timeline. v3: it might be a good idea to first remove the global_timeline...duh! Fixes: 73cb9701 ("drm/i915: Combine seqno + tracking into a global timeline struct") Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Reviewed-by:
-
Matthew Auld authored
We already have an i915_address_space_init, so for symmetry we should also have a _fini, plus we already open code it twice. This then also fixes a bug where we leak the timeline for the ggtt vm. v2: don't forget about the struct_mutex for the ggtt path. Fixes: 80b204bc ("drm/i915: Enable multiple timelines") Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Chris Wilson authored
We should never be called via obj->ops->release() on anything other than a fully formed stolen object, so raise that to an assert. In the process tidy up a comment and variable no longer used outside of a conditional BUG. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Tvrtko Ursulin authored
We have to make sure there are no holes in the table in Gen9. Signed-off-by:
-
Tvrtko Ursulin authored
Similar to existing yesno and onoff and use it throughout the code. Signed-off-by:
-
Tvrtko Ursulin authored
Signed-off-by: -
Tvrtko Ursulin authored
Signed-off-by: -
Tvrtko Ursulin authored
Signed-off-by: -
Tvrtko Ursulin authored
Kernel pointer does not sound like an useful thing to log and pipe name is already contained in the crtc name. Signed-off-by: -
Tvrtko Ursulin authored
Signed-off-by: -
Tvrtko Ursulin authored
And also only dump DP config for crtcs with DP encoders. Signed-off-by: -
Chris Wilson authored
We don't spam the debug when we create a normal object, nor when we allocate their pages. Yet we do for stolen objects, and since these are quite frequently used (at least once per context), the resulting spam floods the dmesg in CI. Signed-off-by:
-
Chris Wilson authored
We use DRM_DEBUG() when reporting on user actions, to try and keep intentional errors out of the CI dmesg. Demote the debug from i915_gem_open() similarly so that it is only apparent with drm.debug & 1 like its brethren. Signed-off-by:
-
Tvrtko Ursulin authored
It looks to me skl_update_scaler will already log interesting debug messages when the state transitions or there is an error. In this case it feels we can remove the two unconditional debug messages which happen immediately before calling skl_update_scaler. This way we get rid of the sole debug message when switching virtual terminals for example. Signed-off-by:
-
Tvrtko Ursulin authored
And at the same time introduce a static inline helper for more type safety. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Tvrtko Ursulin authored
Macro takes dev_priv and not dev. Signed-off-by:
-
Tvrtko Ursulin authored
v2: Rebase. Signed-off-by:
-
Tvrtko Ursulin authored
Plus a trickle of function prototype changes. Signed-off-by:
-
Tvrtko Ursulin authored
And as usual a little bit of cascaded function prototype changes. Signed-off-by:
-
Tvrtko Ursulin authored
A bunch of source files with just a few instances of the incorrect INTEL_INFO use. Signed-off-by:
-
Tvrtko Ursulin authored
And a little bit of function prototype changes. Signed-off-by:
-
Tvrtko Ursulin authored
And a little bit of function prototype changes. Signed-off-by:
-
Tvrtko Ursulin authored
And a little bit of cascaded function prototype changes. Signed-off-by:
-
Tvrtko Ursulin authored
And a little bit of cascaded function prototype changes. Signed-off-by:
-
Tvrtko Ursulin authored
And a little bit of cascaded function prototype changes. Signed-off-by:
-
Tvrtko Ursulin authored
Started with removing INTEL_INFO(dev) and cascaded into a quite big trickle of function prototype changes. Still, I think it is for the better. Signed-off-by:
-
Tvrtko Ursulin authored
Plus a small cascade of function prototype changes. Signed-off-by:
-
Tvrtko Ursulin authored
Signed-off-by:
-
Tvrtko Ursulin authored
Signed-off-by:
-
https://github.com/01org/gvt-linuxDaniel Vetter authored
From Zhenyu Wang: gvt-next-2016-11-17 - Fix lock order issue found in guest stress test - Fix several MMIO handlers to correct behavior - Fix crash for vgpu execlist reset and memleak - Fix a possible conflict for unresolved vfio mdev dependency - other misc fixes Signed-off-by:Daniel Vetter <daniel.vetter@intel.com>
-
Daniel Vetter authored
Tvrtko needs commit b3c11ac2 Author: Eric Engestrom <eric@engestrom.ch> Date: Sat Nov 12 01:12:56 2016 +0000 drm: move allocation out of drm_get_format_name() to be able to apply his patches without conflicts. Signed-off-by:
-
Tvrtko Ursulin authored
Commit 0dd356bb ("drm/i915: Eliminate Gen9 special case") accidentaly dropped a MMIO range between 0xc000 to 0xcfff out of the blitter forcewake domain. Fix it. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Jani Nikula authored
This is essentially the same thing as duplicating DIDL now that the connector list has the ACPI device IDs. Cc: Peter Wu <peter@lekensteyn.nl> Cc: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com> Cc: Jan-Marek Glogowski <glogow@fbihome.de> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Cc: Paolo Stivanin <paolostivanin@fastmail.fm> Tested-by:
Rainer Koenig <Rainer.Koenig@ts.fujitsu.com> Tested-by:
Paolo Stivanin <paolostivanin@fastmail.fm> Tested-by:
Marcos Paulo de Souza <marcos.souza.org@gmail.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/ea0a052fa99a4cb56b559a815866434bcfef853d.1479295490.git.jani.nikula@intel.com
-
Jani Nikula authored
The graphics driver is supposed to define the DIDL, which are used for _DOD, not the BIOS. Restore that behaviour. This is basically a revert of commit 3143751f Author: Zhang Rui <rui.zhang@intel.com> Date: Mon Mar 29 15:12:16 2010 +0800 drm/i915: set DIDL using the ACPI video output device _ADR method return. which went out of its way to cater to a specific BIOS, setting up DIDL based on _ADR method. Perhaps that approach worked on that specific machine, but on the machines I checked the _ADR method invents the device identifiers out of thin air if DIDL has not been set. The source for _ADR is also supposed to be the DIDL set by the driver, not the other way around. With this, we'll also limit the number of outputs to what the driver actually has. A side effect of this change is that the DIDL, and by proxy CADL, will be initialized in the order of the connector list. That, in turn, has internal panels in front, ensuring they're included in the DIDL and CADL lists. Hopefully this ensures the BIOS does not block backlight hotkey events, thinking the internal panel is off. v2: do not set ACPI_DEVICE_ID_SCHEME in the device id (Peter Wu) v3: Rebase Cc: Peter Wu <peter@lekensteyn.nl> Cc: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com> Cc: Jan-Marek Glogowski <glogow@fbihome.de> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Cc: Paolo Stivanin <paolostivanin@fastmail.fm> Tested-by:
Peter Wu <peter@lekensteyn.nl> Signed-off-by:
-
Min He authored
For a single_port_submission context, GVT expects that it can only be submitted to port 0, and there shouldn't be any other context in port 1 at the same time. This is required by GVT-g context to have an opportunity to save/restore some non-hw context render registers. This patch is to workaround GVT-g. v2: optimized code by following Chris's advice, and added more comments to explain the patch. v3: followed the coding style. Signed-off-by:
Min He <min.he@intel.com> Reviewed-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Reviewed-by:
-
Zhenyu Wang authored
Instead of partially depending on vfio pin/unpin pages interface if mdev is available, which would result in failure if vfio is not on. But replace with a wrapper which need to be fixed till mdev support got fully merged. Cc: Jike Song <jike.song@intel.com> Cc: Xiaoguang Chen <xiaoguang.chen@intel.com> Reviewed-by:
Xiaoguang Chen <Xiaoguang.chen@intel.com> Signed-off-by:
-
