DSA ports are stacked devices, so they use dev_mc_add() to sync their
address list to their lower interface (DSA master). But they are also
hardware devices, so they program those addresses to hardware using the
__dev_mc_add() sync and unsync callbacks.

Unfortunately both cannot work at the same time, and it seems that the
multicast addresses which are already present on the DSA master, like
33:33:00:00:00:01 (added by addrconf.c as in6addr_linklocal_allnodes)
are synced to the master via dev_mc_sync(), but not to hardware by
__dev_mc_sync().

This happens because both the dev_mc_sync() -> __hw_addr_sync_one()
code path, as well as __dev_mc_sync() -> __hw_addr_sync_dev(), operate
on the same variable: ha->sync_cnt, in a way that causes the "sync"
method (dsa_slave_sync_mc) to no longer be called.

To fix the issue we need to work with the API in the way in which it was
intended to be used, and therefore, call dev_uc_add() and friends for
each individual hardware address, from the sync and unsync callbacks.

Fixes: 5e8a1e03 ("net: dsa: install secondary unicast and multicast addresses as host FDB/MDB")
Link: https://lore.kernel.org/netdev/20220321163213.lrn5sk7m6grighbl@skbuf/Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220322003701.2056895-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When merged with Linus tree, the cited patch below will cause the
following build warning:

In function 'fortify_memset_chk',
    inlined from 'mlx5e_xmit_xdp_frame' at drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c:438:3:
include/linux/fortify-string.h:242:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
  242 |                         __write_overflow_field(p_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fix that by grouping the fields to memeset in struct_group() to avoid
the false alarm.

Fixes: 9ded70fa ("net/mlx5e: Don't prefill WQEs in XDP SQ in the multi buffer mode")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20220322172224.31849-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When we're copying the PPAG table into the cmd structure we're failing
if the table doesn't exist in ACPI or is invalid, or if the FW doesn't
support PPAG setting etc.

This is wrong because those are valid scenarios.  Fix this by not
failing in those cases.

Fixes: e8e10a37 ("iwlwifi: acpi: move ppag code from mvm to fw/acpi")
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20220322173828.fa47f369b717.I6a9c65149c2c3c11337f3a802dff22f514a3a436@changeidSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Alexei Starovoitov says:

====================
pull-request: bpf-next 2022-03-21 v2

We've added 137 non-merge commits during the last 17 day(s) which contain
a total of 143 files changed, 7123 insertions(+), 1092 deletions(-).

The main changes are:

1) Custom SEC() handling in libbpf, from Andrii.

2) subskeleton support, from Delyan.

3) Use btf_tag to recognize __percpu pointers in the verifier, from Hao.

4) Fix net.core.bpf_jit_harden race, from Hou.

5) Fix bpf_sk_lookup remote_port on big-endian, from Jakub.

6) Introduce fprobe (multi kprobe) _without_ arch bits, from Masami.
The arch specific bits will come later.

7) Introduce multi_kprobe bpf programs on top of fprobe, from Jiri.

8) Enable non-atomic allocations in local storage, from Joanne.

9) Various var_off ptr_to_btf_id fixed, from Kumar.

10) bpf_ima_file_hash helper, from Roberto.

11) Add "live packet" mode for XDP in BPF_PROG_RUN, from Toke.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (137 commits)
  selftests/bpf: Fix kprobe_multi test.
  Revert "rethook: x86: Add rethook x86 implementation"
  Revert "arm64: rethook: Add arm64 rethook implementation"
  Revert "powerpc: Add rethook support"
  Revert "ARM: rethook: Add rethook arm implementation"
  bpftool: Fix a bug in subskeleton code generation
  bpf: Fix bpf_prog_pack when PMU_SIZE is not defined
  bpf: Fix bpf_prog_pack for multi-node setup
  bpf: Fix warning for cast from restricted gfp_t in verifier
  bpf, arm: Fix various typos in comments
  libbpf: Close fd in bpf_object__reuse_map
  bpftool: Fix print error when show bpf map
  bpf: Fix kprobe_multi return probe backtrace
  Revert "bpf: Add support to inline bpf_get_func_ip helper on x86"
  bpf: Simplify check in btf_parse_hdr()
  selftests/bpf/test_lirc_mode2.sh: Exit with proper code
  bpf: Check for NULL return from bpf_get_btf_vmlinux
  selftests/bpf: Test skipping stacktrace
  bpf: Adjust BPF stack helper functions to accommodate skip > 0
  bpf: Select proper size for bpf_prog_pack
  ...
====================

Link: https://lore.kernel.org/r/20220322050159.5507-1-alexei.starovoitov@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When compiler emits endbr insn the function address could
be different than what bpf_get_func_ip() reports.
This is a short term workaround.
bpf_get_func_ip() will be fixed later.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This reverts commit 75caf33e.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This reverts commit 83acdce6.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This reverts commit 02752bd9.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This reverts commit 515a4917.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Building htmldocs complains:
  include/linux/netdevice.h:2295: warning: Function parameter or member 'dm_private' not described in 'net_device'

Fixes: b26ef81c ("drop_monitor: remove quadratic behavior")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220322051053.1883186-1-kuba@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Call br_mst_info_size() only if vg pointer is not NULL.

general protection fault, probably for non-canonical address 0xdffffc0000000058: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000002c0-0x00000000000002c7]
CPU: 0 PID: 975 Comm: syz-executor.0 Tainted: G        W         5.17.0-next-20220321-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:br_mst_info_size+0x97/0x270 net/bridge/br_mst.c:242
Code: 00 00 31 c0 e8 ba 10 53 f9 31 c0 b9 40 00 00 00 4c 8d 6c 24 30 4c 89 ef f3 48 ab 48 8d 83 c0 02 00 00 48 89 04 24 48 c1 e8 03 <80> 3c 28 00 0f 85 ae 01 00 00 48 8b 83 c0 02 00 00 41 bf 04 00 00
RSP: 0018:ffffc900153770a8 EFLAGS: 00010202
RAX: 0000000000000058 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000040000 RSI: ffffffff88259876 RDI: ffffc900153772d8
RBP: dffffc0000000000 R08: 0000000000000000 R09: ffffffff8db68957
R10: ffffffff881f737b R11: 0000000000000000 R12: 0000000000000000
R13: ffffc900153770d8 R14: 00000000000002a0 R15: 00000000ffffffff
FS:  00007f18bbb6f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020001a80 CR3: 000000001a7d9000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 00000000000000d8 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 br_get_link_af_size_filtered+0x6e9/0xc00 net/bridge/br_netlink.c:123
 rtnl_link_get_af_size net/core/rtnetlink.c:598 [inline]
 if_nlmsg_size+0x40c/0xa50 net/core/rtnetlink.c:1040
 rtnl_calcit.isra.0+0x25f/0x460 net/core/rtnetlink.c:3780
 rtnetlink_rcv_msg+0xa65/0xb80 net/core/rtnetlink.c:5937
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2496
 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
 netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1921
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:725
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2413
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0x80 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f18baa89049
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f18bbb6f168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f18bab9bf60 RCX: 00007f18baa89049
RDX: 0000000000000000 RSI: 0000000020001a80 RDI: 0000000000000004
RBP: 00007f18baae308d R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffeedb2be2f R14: 00007f18bbb6f300 R15: 0000000000022000
 </TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:br_mst_info_size+0x97/0x270 net/bridge/br_mst.c:242
Code: 00 00 31 c0 e8 ba 10 53 f9 31 c0 b9 40 00 00 00 4c 8d 6c 24 30 4c 89 ef f3 48 ab 48 8d 83 c0 02 00 00 48 89 04 24 48 c1 e8 03 <80> 3c 28 00 0f 85 ae 01 00 00 48 8b 83 c0 02 00 00 41 bf 04 00 00
RSP: 0018:ffffc900153770a8 EFLAGS: 00010202
RAX: 0000000000000058 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000040000 RSI: ffffffff88259876 RDI: ffffc900153772d8
RBP: dffffc0000000000 R08: 0000000000000000 R09: ffffffff8db68957
R10: ffffffff881f737b R11: 0000000000000000 R12: 0000000000000000
R13: ffffc900153770d8 R14: 00000000000002a0 R15: 00000000ffffffff
FS:  00007f18bbb6f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2ca22000 CR3: 000000001a7d9000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 00000000000000d8 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 122c2948 ("net: bridge: mst: Support setting and reporting MST port states")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20220322012314.795187-1-eric.dumazet@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Ido Schimmel says:

====================
selftests: forwarding: Locked bridge port fixes

Two fixes for the locked bridge port selftest.
====================

Link: https://lore.kernel.org/r/20220321175102.978020-1-idosch@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The test creates a separate VRF for the VLAN upper, but does not destroy
it during cleanup, resulting in "RTNETLINK answers: File exists" errors.

Fix by using the same VRF for the port and its VLAN upper. This is OK
since their IP addresses do not overlap.

Before:

 # ./bridge_locked_port.sh
 TEST: Locked port ipv4                                              [ OK ]
 TEST: Locked port ipv6                                              [ OK ]
 TEST: Locked port vlan                                              [ OK ]

 # ./bridge_locked_port.sh
 RTNETLINK answers: File exists
 RTNETLINK answers: File exists
 RTNETLINK answers: File exists
 RTNETLINK answers: File exists
 RTNETLINK answers: File exists
 RTNETLINK answers: File exists
 TEST: Locked port ipv4                                              [ OK ]
 TEST: Locked port ipv6                                              [ OK ]
 TEST: Locked port vlan                                              [ OK ]

After:

 # ./bridge_locked_port.sh
 TEST: Locked port ipv4                                              [ OK ]
 TEST: Locked port ipv6                                              [ OK ]
 TEST: Locked port vlan                                              [ OK ]

 # ./bridge_locked_port.sh
 TEST: Locked port ipv4                                              [ OK ]
 TEST: Locked port ipv6                                              [ OK ]
 TEST: Locked port vlan                                              [ OK ]

Fixes: b2b681a4 ("selftests: forwarding: tests of locked port feature")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Disable learning before bringing the bridge port up in order to avoid
the FDB being populated and the test failing.

Before:

 # ./bridge_locked_port.sh
 RTNETLINK answers: File exists
 TEST: Locked port ipv4                                              [FAIL]
         Ping worked after locking port, but before adding FDB entry
 TEST: Locked port ipv6                                              [ OK ]
 TEST: Locked port vlan                                              [ OK ]

After:

 # ./bridge_locked_port.sh
 TEST: Locked port ipv4                                              [ OK ]
 TEST: Locked port ipv6                                              [ OK ]
 TEST: Locked port vlan                                              [ OK ]

Fixes: b2b681a4 ("selftests: forwarding: tests of locked port feature")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The original behavior was to print out unsigned short or unsigned char
values. The change in commit d65aea8e ("bnx2x: use correct format
characters") prints out the whole value if not truncated. So truncate
the value to an unsigned {short|char} to retain the original behavior.

Fixes: d65aea8e ("bnx2x: use correct format characters")
Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by: Bill Wendling <morbo@google.com>
Link: https://lore.kernel.org/r/20220321023155.106066-1-morbo@google.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Michael Walle says:

====================
net: mscc-miim: add integrated PHY reset support

The MDIO driver has support to release the integrated PHYs from reset.
This was implemented for the SparX-5 for now. Now add support for the
LAN966x, too.
====================

Link: https://lore.kernel.org/r/20220318201324.1647416-1-michael@walle.ccSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The LAN966x has two internal PHYs which are in reset by default. The
driver already supported the internal PHYs of the SparX-5. Now add
support for the LAN966x, too. Add a new compatible to distinguish them.

The LAN966x has additional control bits in this register, thus convert
the regmap_write() to regmap_update_bits() to leave the remaining bits
untouched. This doesn't change anything for the SparX-5 SoC, because
there, the register consists only of reset bits.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Replace the magic numbers by macros which are already defined. It seems
the original commit missed to use them.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The MDIO controller has support to release the internal PHYs from reset
by specifying a second memory resource. This is different between the
currently supported SparX-5 and the LAN966x. Add a new compatible to
distinguish between these two.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Some chips using the split VTU/STU design will not accept VTU entries
who's SID points to an invalid STU entry. Therefore, mark all those
chips with either the mv88e6352_g1_stu_* or mv88e6390_g1_stu_* ops as
appropriate.

Notably, chips for the Opal Plus (6085/6097) era seem to use a
different implementation than those from Agate (6352) and onwards,
even though their external interface is the same. The former happily
accepts VTU entries referencing invalid STU entries, while the latter
does not.

This fixes an issue where the driver would fail to probe switch trees
that contained chips of the Agate/Topaz generation which did not
declare STU support, as loaded VTU entries would be read back as
invalid.

Fixes: 49c98c1d ("net: dsa: mv88e6xxx: Disentangle STU from VTU")
Reported-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20220319110345.555270-1-tobias@waldekranz.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

`cur64`, `start64` and `ts_delta` are int64_t. Change format
specifiers in fprintf from `"%lu"` to `"%" PRId64` to adapt
to 32-bit and 64-bit systems.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Link: https://lore.kernel.org/r/20220319073730.5235-1-guozhengkui@vivo.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The Felix switch has 6 ports, 2 of which are internal.
Due to some misunderstanding, my initial suggestion for
vsc9959_port_modes[]:
https://patchwork.kernel.org/project/netdevbpf/patch/20220129220221.2823127-10-colin.foster@in-advantage.com/#24718277

got translated by Colin into a 5-port array, leading to an all-zero port
mode mask for port 5.

Fixes: acf242fc ("net: dsa: felix: remove prevalidate_phy_mode interface")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220318195812.276276-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tobias Waldekranz says:

====================
net: dsa: mv88e6xxx: MST Fixes

1/2 fixes the issue reported by Marek here:

https://lore.kernel.org/netdev/20220318182817.5ade8ecd@dellmb/

2/2 adds a missing capability check to the new .vlan_msti_set
callback.
====================

Link: https://lore.kernel.org/r/20220318201321.4010543-1-tobias@waldekranz.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In the same way that we check for STU support in the MST state
callback, we should also verify it before trying to change a VLANs
MSTI membership.

Fixes: acaf4d2e ("net: dsa: mv88e6xxx: MST Offloading")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Simply having a physical STU table in the device doesn't do us any
good if there's no implementation of the relevant ops to access that
table. So ensure that chips that claim STU support can also talk to
the hardware.

This fixes an issue where chips that had a their ->info->max_sid
set (due to their family membership), but no implementation (due to
their chip-specific ops struct) would fail to probe.

Fixes: 49c98c1d ("net: dsa: mv88e6xxx: Disentangle STU from VTU")
Reported-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ziyang Xuan says:

====================
net/tls: some optimizations for tls

Do some small optimizations for tls, including jump instructions
optimization, and judgement processes optimization.
====================

Link: https://lore.kernel.org/r/cover.1647658604.git.william.xuanziyang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

It is known that priority setting HW offload when set tls TX/RX offload
by setsockopt(). Check netdevice whether support NETIF_F_HW_TLS_TX or
not at the later stages in the whole tls_set_device_offload() process,
some memory allocations have been done before that. We must release those
memory and return error if we judge the netdevice not support
NETIF_F_HW_TLS_TX. It is redundant.

Move NETIF_F_HW_TLS_TX judgement forward, and move start_marker_record
and offload_ctx memory allocation back slightly. Thus, we can get
simpler exception handling process.
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Avoid using "goto" jump instruction unconditionally when we
can return directly. Remove unnecessary jump instructions in
do_tls_setsockopt_conf().
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Compiled with clang by adding LLVM=1 both kernel and selftests/bpf
build, I hit the following compilation error:

In file included from /.../tools/testing/selftests/bpf/prog_tests/subskeleton.c:6:
  ./test_subskeleton_lib.subskel.h:168:6: error: variable 'err' is used uninitialized whenever
      'if' condition is true [-Werror,-Wsometimes-uninitialized]
          if (!s->progs)
              ^~~~~~~~~
  ./test_subskeleton_lib.subskel.h:181:11: note: uninitialized use occurs here
          errno = -err;
                   ^~~
  ./test_subskeleton_lib.subskel.h:168:2: note: remove the 'if' if its condition is always false
          if (!s->progs)
          ^~~~~~~~~~~~~~

The compilation error is triggered by the following code
        ...
        int err;

        obj = (struct test_subskeleton_lib *)calloc(1, sizeof(*obj));
        if (!obj) {
                errno = ENOMEM;
                goto err;
        }
        ...

  err:
        test_subskeleton_lib__destroy(obj);
        errno = -err;
        ...
in test_subskeleton_lib__open(). The 'err' is not initialized, yet it
is used in 'errno = -err' later.

The fix is to remove 'errno = -err' since errno has been set properly
in all incoming branches.

Fixes: 00389c58 ("bpftool: Add support for subskeletons")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220320032009.3106133-1-yhs@fb.com

PMD_SIZE is not available in some special config, e.g. ARCH=arm with
CONFIG_MMU=n. Use bpf_prog_pack of PAGE_SIZE in these cases.

Fixes: ef078600 ("bpf: Select proper size for bpf_prog_pack")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220321180009.1944482-3-song@kernel.org

module_alloc requires num_online_nodes * PMD_SIZE to allocate huge pages.
bpf_prog_pack uses pack of size num_online_nodes * PMD_SIZE.
OTOH, module_alloc returns addresses that are PMD_SIZE aligned (instead of
num_online_nodes * PMD_SIZE aligned). Therefore, PMD_MASK should be used
to calculate pack_ptr in bpf_prog_pack_free().

Fixes: ef078600 ("bpf: Select proper size for bpf_prog_pack")
Reported-by: syzbot+c946805b5ce6ab87df0b@syzkaller.appspotmail.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220321180009.1944482-2-song@kernel.org

This fixes the sparse warning reported by the kernel test robot:

kernel/bpf/verifier.c:13499:47: sparse: warning: cast from restricted gfp_t
kernel/bpf/verifier.c:13501:47: sparse: warning: cast from restricted gfp_t

This fix can be verified locally by running:
1) wget
https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross
-O make.cross

2) chmod +x ~/bin/make.cross

3) COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 ./make.cross
C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'

Fixes: b00fa38a ("bpf: Enable non-atomic allocations in local storage")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220321185802.824223-1-joannekoong@fb.com

The lockdep annotation lockdep_assert_softirq_will_run() expects that
either hard or soft interrupts are disabled because both guaranty that
the "raised" soft-interrupts will be processed once the context is left.

This triggers in flush_smp_call_function_from_idle() but it this case it
explicitly calls do_softirq() in case of pending softirqs.

Revert the "softirq will run" annotation in ____napi_schedule() and move
the check back to __netif_rx() as it was. Keep the IRQ-off assert in
____napi_schedule() because this is always required.

Fixes: fbd9a2ce ("net: Add lockdep asserts to ____napi_schedule().")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/YjhD3ZKWysyw8rc6@linutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Various spelling mistakes in comments. Detected with the help of
Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220318103729.157574-9-Julia.Lawall@inria.fr

pin_fd is dup-ed and assigned in bpf_map__reuse_fd. Close it
in bpf_object__reuse_map after reuse.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220319030533.3132250-1-hengqi.chen@gmail.com

Jakub Kicinski says:

====================
devlink: hold the instance lock in eswitch callbacks

Series number 2 in the effort to hold the devlink instance lock
in call driver callbacks. We have the following drivers using
this API:

 - bnxt, nfp, netdevsim - their own locking is removed / simplified
   by this series; all of them needed a lock to protect from changes
   to the number of VFs while switching modes, now the VF config bus
   callback takes the devlink instance lock via devl_lock();
 - ice - appears not to allow changing modes while SR-IOV enabled,
   so nothing to do there;
 - liquidio - does not contain any locking;
 - octeontx2/af - is very special but at least doesn't have locking
   so doesn't get in the way either;
 - mlx5 has a wealth of locks - I chickened out and dropped the lock
   in the callbacks so that I can leave the driver be, for now.

The last one is obviously not ideal, but I would prefer to transition
the API already as it make take longer.

v2: use a wrapper in mlx5 and extend the comment
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Make the devlink core hold the instance lock during eswitch_mode
callbacks. Cheat in case of mlx5 (see the cover letter).
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similarly to the previous commit, use the devlink instance
lock and let it replace the vfs_lock.

nsim_esw_legacy_enable() was locked by both port lock and
vfs lock so one set of lock/unlocks goes away.

netdevsim's .eswitch_mode_set callback is now ready for
the callback to take the instance lock.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Take advantage of the devlink instance lock for protecting
the port list. This will simplify locking even more once
all devlink callbacks hold the instance lock.

We need to add locking in nsim_dev_port_add_all() which used
to assume higher layer protection when accessing the list.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We'll need an explicitly locked rate node API for netdevsim
to switch eswitch mode setting to locked.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>