1. 19 Oct, 2019 9 commits
  2. 18 Oct, 2019 12 commits
  3. 17 Oct, 2019 11 commits
    • Wei Wang's avatar
      ipv4: fix race condition between route lookup and invalidation · 5018c596
      Wei Wang authored
      Jesse and Ido reported the following race condition:
      <CPU A, t0> - Received packet A is forwarded and cached dst entry is
      taken from the nexthop ('nhc->nhc_rth_input'). Calls skb_dst_set()
      
      <t1> - Given Jesse has busy routers ("ingesting full BGP routing tables
      from multiple ISPs"), route is added / deleted and rt_cache_flush() is
      called
      
      <CPU B, t2> - Received packet B tries to use the same cached dst entry
      from t0, but rt_cache_valid() is no longer true and it is replaced in
      rt_cache_route() by the newer one. This calls dst_dev_put() on the
      original dst entry which assigns the blackhole netdev to 'dst->dev'
      
      <CPU A, t3> - dst_input(skb) is called on packet A and it is dropped due
      to 'dst->dev' being the blackhole netdev
      
      There are 2 issues in the v4 routing code:
      1. A per-netns counter is used to do the validation of the route. That
      means whenever a route is changed in the netns, users of all routes in
      the netns needs to redo lookup. v6 has an implementation of only
      updating fn_sernum for routes that are affected.
      2. When rt_cache_valid() returns false, rt_cache_route() is called to
      throw away the current cache, and create a new one. This seems
      unnecessary because as long as this route does not change, the route
      cache does not need to be recreated.
      
      To fully solve the above 2 issues, it probably needs quite some code
      changes and requires careful testing, and does not suite for net branch.
      
      So this patch only tries to add the deleted cached rt into the uncached
      list, so user could still be able to use it to receive packets until
      it's done.
      
      Fixes: 95c47f9c ("ipv4: call dst_dev_put() properly")
      Signed-off-by: default avatarWei Wang <weiwan@google.com>
      Reported-by: default avatarIdo Schimmel <idosch@idosch.org>
      Reported-by: default avatarJesse Hathaway <jesse@mbuki-mvuki.org>
      Tested-by: default avatarJesse Hathaway <jesse@mbuki-mvuki.org>
      Acked-by: default avatarMartin KaFai Lau <kafai@fb.com>
      Cc: David Ahern <dsahern@gmail.com>
      Reviewed-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5018c596
    • Stefano Brivio's avatar
      ipv4: Return -ENETUNREACH if we can't create route but saddr is valid · 595e0651
      Stefano Brivio authored
      ...instead of -EINVAL. An issue was found with older kernel versions
      while unplugging a NFS client with pending RPCs, and the wrong error
      code here prevented it from recovering once link is back up with a
      configured address.
      
      Incidentally, this is not an issue anymore since commit 4f8943f8
      ("SUNRPC: Replace direct task wakeups from softirq context"), included
      in 5.2-rc7, had the effect of decoupling the forwarding of this error
      by using SO_ERROR in xs_wake_error(), as pointed out by Benjamin
      Coddington.
      
      To the best of my knowledge, this isn't currently causing any further
      issue, but the error code doesn't look appropriate anyway, and we
      might hit this in other paths as well.
      
      In detail, as analysed by Gonzalo Siero, once the route is deleted
      because the interface is down, and can't be resolved and we return
      -EINVAL here, this ends up, courtesy of inet_sk_rebuild_header(),
      as the socket error seen by tcp_write_err(), called by
      tcp_retransmit_timer().
      
      In turn, tcp_write_err() indirectly calls xs_error_report(), which
      wakes up the RPC pending tasks with a status of -EINVAL. This is then
      seen by call_status() in the SUN RPC implementation, which aborts the
      RPC call calling rpc_exit(), instead of handling this as a
      potentially temporary condition, i.e. as a timeout.
      
      Return -EINVAL only if the input parameters passed to
      ip_route_output_key_hash_rcu() are actually invalid (this is the case
      if the specified source address is multicast, limited broadcast or
      all zeroes), but return -ENETUNREACH in all cases where, at the given
      moment, the given source address doesn't allow resolving the route.
      
      While at it, drop the initialisation of err to -ENETUNREACH, which
      was added to __ip_route_output_key() back then by commit
      0315e382 ("net: Fix behaviour of unreachable, blackhole and
      prohibit routes"), but actually had no effect, as it was, and is,
      overwritten by the fib_lookup() return code assignment, and anyway
      ignored in all other branches, including the if (fl4->saddr) one:
      I find this rather confusing, as it would look like -ENETUNREACH is
      the "default" error, while that statement has no effect.
      
      Also note that after commit fc75fc83 ("ipv4: dont create routes
      on down devices"), we would get -ENETUNREACH if the device is down,
      but -EINVAL if the source address is specified and we can't resolve
      the route, and this appears to be rather inconsistent.
      Reported-by: default avatarStefan Walter <walteste@inf.ethz.ch>
      Analysed-by: default avatarBenjamin Coddington <bcodding@redhat.com>
      Analysed-by: default avatarGonzalo Siero <gsierohu@redhat.com>
      Signed-off-by: default avatarStefano Brivio <sbrivio@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      595e0651
    • Marek Vasut's avatar
      net: phy: micrel: Update KSZ87xx PHY name · 1d951ba3
      Marek Vasut authored
      The KSZ8795 PHY ID is in fact used by KSZ8794/KSZ8795/KSZ8765 switches.
      Update the PHY ID and name to reflect that, as this family of switches
      is commonly refered to as KSZ87xx
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Andrew Lunn <andrew@lunn.ch>
      Cc: David S. Miller <davem@davemloft.net>
      Cc: Florian Fainelli <f.fainelli@gmail.com>
      Cc: George McCollister <george.mccollister@gmail.com>
      Cc: Heiner Kallweit <hkallweit1@gmail.com>
      Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
      Cc: Tristram Ha <Tristram.Ha@microchip.com>
      Cc: Woojung Huh <woojung.huh@microchip.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1d951ba3
    • Marek Vasut's avatar
      net: phy: micrel: Discern KSZ8051 and KSZ8795 PHYs · 8b95599c
      Marek Vasut authored
      The KSZ8051 PHY and the KSZ8794/KSZ8795/KSZ8765 switch share exactly the
      same PHY ID. Since KSZ8051 is higher in the ksphy_driver[] list of PHYs
      in the micrel PHY driver, it is used even with the KSZ87xx switch. This
      is wrong, since the KSZ8051 configures registers of the PHY which are
      not present on the simplified KSZ87xx switch PHYs and misconfigures
      other registers of the KSZ87xx switch PHYs.
      
      Fortunatelly, it is possible to tell apart the KSZ8051 PHY from the
      KSZ87xx switch by checking the Basic Status register Bit 0, which is
      read-only and indicates presence of the Extended Capability Registers.
      The KSZ8051 PHY has those registers while the KSZ87xx switch does not.
      
      This patch implements simple check for the presence of this bit for
      both the KSZ8051 PHY and KSZ87xx switch, to let both use the correct
      PHY driver instance.
      
      Fixes: 9d162ed6 ("net: phy: micrel: add support for KSZ8795")
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Andrew Lunn <andrew@lunn.ch>
      Cc: David S. Miller <davem@davemloft.net>
      Cc: Florian Fainelli <f.fainelli@gmail.com>
      Cc: George McCollister <george.mccollister@gmail.com>
      Cc: Heiner Kallweit <hkallweit1@gmail.com>
      Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
      Cc: Tristram Ha <Tristram.Ha@microchip.com>
      Cc: Woojung Huh <woojung.huh@microchip.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8b95599c
    • Marek Vasut's avatar
      net: dsa: microchip: Add shared regmap mutex · 013572a2
      Marek Vasut authored
      The KSZ driver uses one regmap per register width (8/16/32), each with
      it's own lock, but accessing the same set of registers. In theory, it
      is possible to create a race condition between these regmaps, although
      the underlying bus (SPI or I2C) locking should assure nothing bad will
      really happen and the accesses would be correct.
      
      To make the driver do the right thing, add one single shared mutex for
      all the regmaps used by the driver instead. This assures that even if
      some future hardware is on a bus which does not serialize the accesses
      the same way SPI or I2C does, nothing bad will happen.
      
      Note that the status_mutex was unused and only initied, hence it was
      renamed and repurposed as the regmap mutex.
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Andrew Lunn <andrew@lunn.ch>
      Cc: David S. Miller <davem@davemloft.net>
      Cc: Florian Fainelli <f.fainelli@gmail.com>
      Cc: George McCollister <george.mccollister@gmail.com>
      Cc: Tristram Ha <Tristram.Ha@microchip.com>
      Cc: Woojung Huh <woojung.huh@microchip.com>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      013572a2
    • Marek Vasut's avatar
      net: dsa: microchip: Do not reinit mutexes on KSZ87xx · 7f238ca9
      Marek Vasut authored
      The KSZ87xx driver calls mutex_init() on mutexes already inited in
      ksz_common.c ksz_switch_register(). Do not do it twice, drop the
      reinitialization.
      Signed-off-by: default avatarMarek Vasut <marex@denx.de>
      Cc: Andrew Lunn <andrew@lunn.ch>
      Cc: David S. Miller <davem@davemloft.net>
      Cc: Florian Fainelli <f.fainelli@gmail.com>
      Cc: George McCollister <george.mccollister@gmail.com>
      Cc: Tristram Ha <Tristram.Ha@microchip.com>
      Cc: Woojung Huh <woojung.huh@microchip.com>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7f238ca9
    • Ben Dooks (Codethink)'s avatar
      net: stmmac: fix argument to stmmac_pcs_ctrl_ane() · c9ad4c10
      Ben Dooks (Codethink) authored
      The stmmac_pcs_ctrl_ane() expects a register address as
      argument 1, but for some reason the mac_device_info is
      being passed.
      
      Fix the warning (and possible bug) from sparse:
      
      drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2613:17: warning: incorrect type in argument 1 (different address spaces)
      drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2613:17:    expected void [noderef] <asn:2> *ioaddr
      drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2613:17:    got struct mac_device_info *hw
      Signed-off-by: default avatarBen Dooks <ben.dooks@codethink.co.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c9ad4c10
    • David S. Miller's avatar
      Merge branch 'dpaa2-eth-misc-fixes' · 693aa7dd
      David S. Miller authored
      Ioana Ciornei says:
      
      ====================
      dpaa2-eth: misc fixes
      
      This patch set adds a couple of fixes around updating configuration on MAC
      change.  Depending on when MC connects the DPNI to a MAC, both the MAC
      address and TX FQIDs should be updated everytime there is a change in
      configuration.
      
      Changes in v2:
       - used reverse christmas tree ordering in patch 2/2
      Changes in v3:
       - add a missing new line
       - go back to FQ based enqueueing after a transient error
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      693aa7dd
    • Ioana Radulescu's avatar
      dpaa2-eth: Fix TX FQID values · a690af4f
      Ioana Radulescu authored
      Depending on when MC connects the DPNI to a MAC, Tx FQIDs may
      not be available during probe time.
      
      Read the FQIDs each time the link goes up to avoid using invalid
      values. In case an error occurs or an invalid value is retrieved,
      fall back to QDID-based enqueueing.
      
      Fixes: 1fa0f68c ("dpaa2-eth: Use FQ-based DPIO enqueue API")
      Signed-off-by: default avatarIoana Radulescu <ruxandra.radulescu@nxp.com>
      Signed-off-by: default avatarIoana Ciornei <ioana.ciornei@nxp.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a690af4f
    • Florin Chiculita's avatar
      dpaa2-eth: add irq for the dpmac connect/disconnect event · 8398b375
      Florin Chiculita authored
      Add IRQ for the DPNI endpoint change event, resolving the issue
      when a dynamically created DPNI gets a randomly generated hw address
      when the endpoint is a DPMAC object.
      Signed-off-by: default avatarFlorin Chiculita <florinlaurentiu.chiculita@nxp.com>
      Signed-off-by: default avatarIoana Ciornei <ioana.ciornei@nxp.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8398b375
    • Oliver Neukum's avatar
      usb: hso: obey DMA rules in tiocmget · af0de130
      Oliver Neukum authored
      The serial state information must not be embedded into another
      data structure, as this interferes with cache handling for DMA
      on architectures without cache coherence..
      That would result in data corruption on some architectures
      Allocating it separately.
      
      v2: fix syntax error
      Signed-off-by: default avatarOliver Neukum <oneukum@suse.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      af0de130
  4. 16 Oct, 2019 8 commits