Pull Xtensa fixes from Max Filippov:

 - fix stack alignment for bFLT binaries.

 - fix physical-to-virtual address translation for boot parameters in
   MMUv3 256+256 and 512+512 virtual memory layouts.

* tag 'xtensa-20181115' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: fix boot parameters address translation
  xtensa: make sure bFLT stack is 16 byte aligned

Pull block fixes from Jens Axboe:

 - Discard loop fix, caused by integer overflow (Dave)

 - Blacklist of Samsung drive that hangs with power management (Diego)

 - Copy bio priority when cloning it (Hannes)

 - Fix race condition exposed in floppy (me)

 - Fix SCSI queue cleanup regression. While elusive, it caused oopses in
   queue running (Ming)

 - Fix bad string copy in kyber tracing (Omar)

* tag 'for-linus-20181115' of git://git.kernel.dk/linux-block:
  SCSI: fix queue cleanup race before queue initialization is done
  block: fix 32 bit overflow in __blkdev_issue_discard()
  libata: blacklist SAMSUNG MZ7TD256HAFV-000L9 SSD
  block: copy ioprio in __bio_clone_fast() and bounce
  kyber: fix wrong strlcpy() size in trace_kyber_latency()
  floppy: fix race condition in __floppy_read_block_0()

Pull fuse fixes from Miklos Szeredi:
 "A couple of fixes, all bound for -stable (i.e. not regressions in this
  cycle)"

* tag 'fuse-fixes-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix use-after-free in fuse_direct_IO()
  fuse: fix possibly missed wake-up after abort
  fuse: fix leaked notify reply

Pull SELinux fixes from Paul Moore:
 "Two small SELinux fixes for v4.20.

  Ondrej's patch adds a check on user input, and my patch ensures we
  don't look past the end of a buffer.

  Both patches are quite small and pass the selinux-testsuite"

* tag 'selinux-pr-20181115' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: fix non-MLS handling in mls_context_to_sid()
  selinux: check length properly in SCTP bind hook

Pull pin control fixes from Linus Walleij:

 - A bunch of fixes for the Allwinner meson platform

 - Establish a git repo for Intel pin control in MAINTAINERS

* tag 'pinctrl-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  MAINTAINERS: Add tree link for Intel pin control driver
  pinctrl: meson: fix meson8b ao pull register bits
  pinctrl: meson: fix meson8 ao pull register bits
  pinctrl: meson: fix gxl ao pull register bits
  pinctrl: meson: fix gxbb ao pull register bits
  pinctrl: meson: fix pinconf bias disable

Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include:

 Stable fixes:

   - Don't exit the NFSv4 state manager without clearing
     NFS4CLNT_MANAGER_RUNNING

  Bugfixes:

   - Fix an Oops when destroying the RPCSEC_GSS credential cache

   - Fix an Oops during delegation callbacks

   - Ensure that the NFSv4 state manager exits the loop on SIGKILL

   - Fix a bogus get/put in generic_key_to_expire()"

* tag 'nfs-for-4.20-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4: Fix an Oops during delegation callbacks
  SUNRPC: Fix a bogus get/put in generic_key_to_expire()
  SUNRPC: Fix a Oops when destroying the RPCSEC_GSS credential cache
  NFSv4: Ensure that the state manager exits the loop on SIGKILL
  NFSv4: Don't exit the state manager without clearing NFS4CLNT_MANAGER_RUNNING

Merge tag 'riscv-for-linus-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V fixes from Palmer Dabbelt:
 "This contains a few patches that fix various issues in the RISC-V
  port:

   - enable printk timestamps in the RISC-V defconfig.

   - a whitespace fix to "struct pt_regs".

   - add a "vdso_install" target for RISC-V.

   - a pair of build fixes: one to fix a typo in our makefile, and one
     to clean up some warnings.

  There will probably be more patches from us for 4.20, but I don't have
  anything that's ready to go right now so I'm going to hold off a bit.

  Right now the only concrete thing I know I want to make sure gets
  sorted out is our 32-bit stat interface, which I don't want sitting in
  limbo for another cycle as we have to get RV32I glibc sone"

* tag 'riscv-for-linus-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  RISC-V: Silence some module warnings on 32-bit
  RISC-V: lib: Fix build error for 64-bit
  riscv: add missing vdso_install target
  riscv: fix spacing in struct pt_regs
  RISC-V: defconfig: Enable printk timestamps

Pull kgdb fixes from Daniel Thompson:
 "The most important changes here are two fixes for kdb regressions
  causes by the hashing of %p pointers together with a fix for a
  potential overflow in kdb tab completion handling (and warning fix).

  Also included are a set of changes in preparation to (eventually)
  enable -Wimplicit-fallthrough"

* tag 'kgdb-fixes-4.20-rc3' of https://git.linaro.org/people/daniel.thompson/linux:
  kdb: kdb_support: mark expected switch fall-throughs
  kdb: kdb_keyboard: mark expected switch fall-throughs
  kdb: kdb_main: refactor code in kdb_md_line
  kdb: Use strscpy with destination buffer size
  kdb: print real address of pointers instead of hashed addresses
  kdb: use correct pointer when 'btc' calls 'btt'

Merge branch 'fixes-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

Pull integrity fix from James Morris:
 "Fix a bug introduced with in this merge window in 82f94f24 ("KEYS:
  Provide software public key query function [ver #2]")"

* 'fixes-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  integrity: support new struct public_key_signature encoding field

Pull ACPI fix from Rafael Wysocki:
 "Fix a recently introduced build issue in the xpower PMIC driver (Arnd
  Bergmann)"

* tag 'acpi-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PMIC: xpower: fix IOSF_MBI dependency

Pull power management fixes from Rafael Wysocki:
 "These remove a stale DT entry left behind after recent removal of a
  cpufreq driver without users, fix up error handling in the imx6q
  cpufreq driver, fix two issues in the cpufreq documentation, and
  update the ARM cpufreq driver.

  Specifics:

   - Drop stale DT binding for the arm_big_little_dt driver removed
     recently (Sudeep Holla).

   - Fix up error handling in the imx6q cpufreq driver to make it report
     voltage scaling failures (Anson Huang).

   - Fix two issues in the cpufreq documentation (Viresh Kumar, Zhao Wei
     Liew).

   - Fix ARM cpuidle driver initialization regression from the 4.19 time
     frame and rework the driver registration part of it to simplify
     code (Ulf Hansson)"

* tag 'pm-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ARM: cpuidle: Convert to use cpuidle_register|unregister()
  ARM: cpuidle: Don't register the driver when back-end init returns -ENXIO
  dt-bindings: cpufreq: remove stale arm_big_little_dt entry
  Documentation: cpufreq: Correct a typo
  cpufreq: imx6q: add return value check for voltage scale
  Documentation: cpu-freq: Frequencies aren't always sorted

Pull nfsd fixes from Bruce Fields:
 "Three nfsd bugfixes.

  None are new bugs, but they all take a little effort to hit, which
  might explain why they weren't found sooner"

* tag 'nfsd-4.20-1' of git://linux-nfs.org/~bfields/linux:
  SUNRPC: drop pointless static qualifier in xdr_get_next_encode_buffer()
  nfsd: COPY and CLONE operations require the saved filehandle to be set
  sunrpc: correct the computation for page_ptr when truncating

Pull PCI fix from Bjorn Helgaas:
 "Revert a _PXM change that causes silent early boot failure on some AMD
  ThreadRipper systems"

* tag 'pci-v4.20-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  Revert "ACPI/PCI: Pay attention to device-specific _PXM node values"

Pull SCSI fixes from James Bottomley:
 "This is mostly a set of minor and obvious fixes (three in one of the
  new drivers).

  The only substantial change is to move the ufs to the blk-mq now that
  the merge window fixed the suspend/resume issues with blk-mq"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Initialize port speed to avoid setting lower speed
  Revert "scsi: ufs: Disable blk-mq for now"
  scsi: NCR5380: Return false instead of NULL
  scsi: qla2xxx: Fix a typo in MODULE_PARM_DESC
  scsi: hisi_sas: Remove set but not used variable 'dq_list'
  scsi: myrs: only build on little-endian platforms
  scsi: myrs: avoid stack overflow warning
  scsi: lpfc: fix remoteport access
  scsi: myrb: fix sprintf buffer overflow warning
  scsi: target/core: Avoid that a kernel oops is triggered when COMPARE AND WRITE fails

Pull RTC driver fixes from Alexandre Belloni:

 - cmos: stop exporting alarms when not supported

 - hctosys: correctly report range error

 - pcf2127: fix a memory leak

* tag 'rtc-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: pcf2127: fix a kmemleak caused in pcf2127_i2c_gather_write
  rtc: hctosys: Add missing range error reporting
  rtc: cmos: Do not export alarm rtc_ops when we do not support alarms

Pull namespace fix from Eric Biederman:
 "Benjamin Coddington noticed an unkillable busy loop in the kernel that
  anyone who is sufficiently motivated can trigger. This bug did not
  exist in earlier kernels making this bug a regression.

  I have tested the change personally and confirmed that the bug exists
  and that the fix works. This fix has been picked up by linux-next and
  hopefully the automated testing bots and no problems have been
  reported from those sources.

  Ordinarily I would let something like this sit a little longer but I
  am going to be away at Linux Plumbers the rest of this week and I am
  afraid if I don't send the pull request now this fix will get lost"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  mnt: fix __detach_mounts infinite loop

Pull parisc fix from Helge Deller:
 "Revert one patch which changed how spinlocks get released. It breaks
  the rwlock implementation in glibc"

* 'parisc-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Revert "Release spinlocks using ordered store"

Pull ARM fix from Russell King:
 "It was noticed that one of Julien's patches contained an error, this
  fixes that up"

* 'spectre' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8810/1: vfp: Fix wrong assignement to ufp_exc

c2856ae2 ("blk-mq: quiesce queue before freeing queue") has
already fixed this race, however the implied synchronize_rcu()
in blk_mq_quiesce_queue() can slow down LUN probe a lot, so caused
performance regression.

Then 1311326c ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()")
tried to quiesce queue for avoiding unnecessary synchronize_rcu()
only when queue initialization is done, because it is usual to see
lots of inexistent LUNs which need to be probed.

However, turns out it isn't safe to quiesce queue only when queue
initialization is done. Because when one SCSI command is completed,
the user of sending command can be waken up immediately, then the
scsi device may be removed, meantime the run queue in scsi_end_request()
is still in-progress, so kernel panic can be caused.

In Red Hat QE lab, there are several reports about this kind of kernel
panic triggered during kernel booting.

This patch tries to address the issue by grabing one queue usage
counter during freeing one request and the following run queue.

Fixes: 1311326c ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()")
Cc: Andrew Jones <drjones@redhat.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: stable <stable@vger.kernel.org>
Cc: jianchao.wang <jianchao.w.wang@oracle.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

A discard cleanup merged into 4.20-rc2 causes fstests xfs/259 to
fall into an endless loop in the discard code. The test is creating
a device that is exactly 2^32 sectors in size to test mkfs boundary
conditions around the 32 bit sector overflow region.

mkfs issues a discard for the entire device size by default, and
hence this throws a sector count of 2^32 into
blkdev_issue_discard(). It takes the number of sectors to discard as
a sector_t - a 64 bit value.

The commit ba5d7385 ("block: cleanup __blkdev_issue_discard")
takes this sector count and casts it to a 32 bit value before
comapring it against the maximum allowed discard size the device
has. This truncates away the upper 32 bits, and so if the lower 32
bits of the sector count is zero, it starts issuing discards of
length 0. This causes the code to fall into an endless loop, issuing
a zero length discards over and over again on the same sector.

Fixes: ba5d7385 ("block: cleanup __blkdev_issue_discard")
Tested-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>

Killed pointless WARN_ON().
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The bootloader may pass physical address of the boot parameters structure
to the MMUv3 kernel in the register a2. Code in the _SetupMMU block in
the arch/xtensa/kernel/head.S is supposed to map that physical address to
the virtual address in the configured virtual memory layout.

This code haven't been updated when additional 256+256 and 512+512
memory layouts were introduced and it may produce wrong addresses when
used with these layouts.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Commit 95ffe194 ("selinux: refactor mls_context_to_sid() and make
it stricter") inadvertently changed how we handle labels that did not
contain MLS information.  This patch restores the proper behavior in
mls_context_to_sid() and adds a comment explaining the proper
behavior to help ensure this doesn't happen again.

Fixes: 95ffe194 ("selinux: refactor mls_context_to_sid() and make it stricter")
Reported-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>

If the server sends a CB_GETATTR or a CB_RECALL while the filesystem is
being unmounted, then we can Oops when releasing the inode in
nfs4_callback_getattr() and nfs4_callback_recall().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

On systems with IMA-appraisal enabled with a policy requiring file
signatures, the "good" signature values are stored on the filesystem as
extended attributes (security.ima).  Signature verification failure
would normally be limited to just a particular file (eg. executable),
but during boot signature verification failure could result in a system
hang.

Defining and requiring a new public_key_signature field requires all
callers of asymmetric signature verification to be updated to reflect
the change.  This patch updates the integrity asymmetric_verify()
caller.

Fixes: 82f94f24 ("KEYS: Provide software public key query function [ver #2]")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: James Morris <james.morris@microsoft.com>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Notice that in this particular case, I replaced the code comments with
a proper "fall through" annotation, which is what GCC is expecting
to find.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Notice that in this particular case, I replaced the code comments with
a proper "fall through" annotation, which is what GCC is expecting
to find.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>

Replace the whole switch statement with a for loop.  This makes the
code clearer and easy to read.

This also addresses the following Coverity warnings:

Addresses-Coverity-ID: 115090 ("Missing break in switch")
Addresses-Coverity-ID: 115091 ("Missing break in switch")
Addresses-Coverity-ID: 114700 ("Missing break in switch")
Suggested-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
[daniel.thompson@linaro.org: Tiny grammar change in description]
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>

gcc 8.1.0 warns with:

kernel/debug/kdb/kdb_support.c: In function ‘kallsyms_symbol_next’:
kernel/debug/kdb/kdb_support.c:239:4: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=]
     strncpy(prefix_name, name, strlen(name)+1);
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/debug/kdb/kdb_support.c:239:31: note: length computed here

Use strscpy() with the destination buffer size, and use ellipses when
displaying truncated symbols.

v2: Use strscpy()
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Jonathan Toppins <jtoppins@redhat.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: kgdb-bugreport@lists.sourceforge.net
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>

Since commit ad67b74d ("printk: hash addresses printed with %p"),
all pointers printed with %p are printed with hashed addresses
instead of real addresses in order to avoid leaking addresses in
dmesg and syslog. But this applies to kdb too, with is unfortunate:

    Entering kdb (current=0x(ptrval), pid 329) due to Keyboard Entry
    kdb> ps
    15 sleeping system daemon (state M) processes suppressed,
    use 'ps A' to see all.
    Task Addr       Pid   Parent [*] cpu State Thread     Command
    0x(ptrval)      329      328  1    0   R  0x(ptrval) *sh

    0x(ptrval)        1        0  0    0   S  0x(ptrval)  init
    0x(ptrval)        3        2  0    0   D  0x(ptrval)  rcu_gp
    0x(ptrval)        4        2  0    0   D  0x(ptrval)  rcu_par_gp
    0x(ptrval)        5        2  0    0   D  0x(ptrval)  kworker/0:0
    0x(ptrval)        6        2  0    0   D  0x(ptrval)  kworker/0:0H
    0x(ptrval)        7        2  0    0   D  0x(ptrval)  kworker/u2:0
    0x(ptrval)        8        2  0    0   D  0x(ptrval)  mm_percpu_wq
    0x(ptrval)       10        2  0    0   D  0x(ptrval)  rcu_preempt

The whole purpose of kdb is to debug, and for debugging real addresses
need to be known. In addition, data displayed by kdb doesn't go into
dmesg.

This patch replaces all %p by %px in kdb in order to display real
addresses.

Fixes: ad67b74d ("printk: hash addresses printed with %p")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>

On a powerpc 8xx, 'btc' fails as follows:

Entering kdb (current=0x(ptrval), pid 282) due to Keyboard Entry
kdb> btc
btc: cpu status: Currently on cpu 0
Available cpus: 0
kdb_getarea: Bad address 0x0

when booting the kernel with 'debug_boot_weak_hash', it fails as well

Entering kdb (current=0xba99ad80, pid 284) due to Keyboard Entry
kdb> btc
btc: cpu status: Currently on cpu 0
Available cpus: 0
kdb_getarea: Bad address 0xba99ad80

On other platforms, Oopses have been observed too, see
https://github.com/linuxppc/linux/issues/139

This is due to btc calling 'btt' with %p pointer as an argument.

This patch replaces %p by %px to get the real pointer value as
expected by 'btt'

Fixes: ad67b74d ("printk: hash addresses printed with %p")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>

selinux_sctp_bind_connect() must verify if the address buffer has
sufficient length before accessing the 'sa_family' field. See
__sctp_connect() for a similar check.

The length of the whole address ('len') is already checked in the
callees.
Reported-by: Qian Cai <cai@gmx.us>
Fixes: d452930f ("selinux: Add SCTP support")
Cc: <stable@vger.kernel.org> # 4.17+
Cc: Richard Haines <richard_c_haines@btinternet.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Tested-by: Qian Cai <cai@gmx.us>
Signed-off-by: Paul Moore <paul@paul-moore.com>

This reverts commit bad7dcd9.

bad7dcd9 ("ACPI/PCI: Pay attention to device-specific _PXM node
values") caused boot failures (no console output at all) for Martin [1]
and Ingo [2] on AMD ThreadRipper systems.

Revert the commit until we figure out how to safely use these
device-specific _PXM values.

[1] https://lore.kernel.org/linux-pci/20180912152140.3676-2-Jonathan.Cameron@huawei.com
[2] https://lore.kernel.org/linux-pci/20181113071712.GA2353@gmail.com
Fixes: bad7dcd9 ("ACPI/PCI: Pay attention to device-specific _PXM node values")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Fixes:

arch/riscv/kernel/module.c: In function 'apply_r_riscv_32_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:23:27: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_pcrel_hi20_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:104:23: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_hi20_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:146:23: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_got_hi20_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:190:60: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_call_plt_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:214:24: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_call_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:236:23: note: format string is defined here
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

Fixes the following build error from tinyconfig:

riscv64-unknown-linux-gnu-ld: kernel/sched/fair.o: in function `.L8':
fair.c:(.text+0x70): undefined reference to `__lshrti3'
riscv64-unknown-linux-gnu-ld: kernel/time/clocksource.o: in function `.L0 ':
clocksource.c:(.text+0x334): undefined reference to `__lshrti3'

Fixes: 7f47c73b ("RISC-V: Build tishift only on 64-bit")
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

Building kernel 4.20 for Fedora as RPM fails, because riscv is missing
vdso_install target in arch/riscv/Makefile.
Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

Replace 8 spaces with tab to match styling.
Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

The printk timestamps are very useful information to visually see
where kernel is spending time during boot. It also helps us see
the timing of hotplug events at runtime.

This patch enables printk timestamps in RISC-V defconfig so that
we have it enabled by default (similar to other architectures
such as x86_64, arm64, etc).
Signed-off-by: Anup Patel <anup@brainfault.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Commit 07d02a67 causes a use-after free in the RPCSEC_GSS credential
destroy code, because the call to get_rpccred() in gss_destroying_context()
will now always fail to increment the refcount.

While we could just replace the get_rpccred() with a refcount_set(), that
would have the unfortunate consequence of resurrecting a credential in
the credential cache for which we are in the process of destroying the
RPCSEC_GSS context. Rather than do this, we choose to make a copy that
is never added to the cache and use that to destroy the context.

Fixes: 07d02a67 ("SUNRPC: Simplify lookup code")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>