- 03 May, 2019 11 commits
-
-
Parav Pandit authored
Use core provided API to fill the source MAC address and use rdma_read_gid_attr_ndev_rcu() to get stable netdev. This is preparation patch to allow gid attribute to become NULL when associated net device is removed. Signed-off-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Parav Pandit authored
Use rdma_read_gid_attr_ndev_rcu() to access netdevice attached to GID entry under rcu lock. This ensures that while working on the netdevice of the GID, it doesn't get freed. Signed-off-by:
-
Parav Pandit authored
To access the netdevice of the GID attribute, use an existing API rdma_read_gid_attr_ndev_rcu(). This further reduces dependency on open access to netdevice of GID attribute. Signed-off-by:
-
Parav Pandit authored
Instead of RoCE drivers figuring out vlan, smac fields while working on QP/AH, provide a helper routine to read the L2 fields such as vlan_id and source mac address. This moves logic from mlx5 driver to core for wider usage for RoCE ports. This is a preparation patch to allow detaching netdev in subsequent patch. Signed-off-by:
-
Parav Pandit authored
GID type to path record type conversion can be done directly based on port type and gid attribute type. There is no need to find out using indirect way by its GID attribute's ndev field. Signed-off-by:
-
Parav Pandit authored
Always consider the skb reserve space based on netdevice of the GID attribute, regardless of vlan or non vlan netdevice. Fixes: 43c9fc50 ("rdma_rxe: make rxe work over 802.1q VLAN devices") Signed-off-by:
-
Kamal Heib authored
Integrate iw_cm_verbs data members into ib_device_ops and ib_device structs, this is done to achieve the following: 1) Avoid memory related bugs durring error unwind 2) Make the code more cleaner 3) Reduce code duplication Signed-off-by:
Kamal Heib <kamalheib1@gmail.com> Signed-off-by:
-
Parav Pandit authored
The driver interface cannot manipulate the sysfs of the compat device, only of the full device so we must avoid calling the driver sysfs APIs on compat devices. This prevents an oops: Call Trace: dump_stack+0x5a/0x73 kobject_init+0x74/0x80 kobject_init_and_add+0x35/0xb0 hfi1_create_port_files+0x6e/0x3c0 [hfi1] ib_setup_port_attrs+0x43b/0x560 [ib_core] add_one_compat_dev+0x16a/0x230 [ib_core] rdma_dev_init_net+0x110/0x160 [ib_core] ops_init+0x38/0xf0 setup_net+0xcf/0x1e0 copy_net_ns+0xb7/0x130 create_new_namespaces+0x11a/0x1b0 unshare_nsproxy_namespaces+0x55/0xa0 ksys_unshare+0x1a7/0x340 __x64_sys_unshare+0xe/0x20 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 5417783e ("RDMA/core: Support core port attributes in non init_net") Reported-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Tested-by:
-
Artemy Kovalyov authored
real_qp should be initialized before ib_destroy_qp() is called. ib_destroy_qp() may be called in the error flow if ib_create_qp_security() failed. Signed-off-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
-
Jack Morgenstein authored
The QP transition optional parameters for the various transition for XRC QPs are identical to those for RC QPs. Many of the XRC QP transition optional parameter bits are missing from the QP optional mask table. These omissions caused failures when doing XRC QP state transitions. For example, when trying to change the response timer of an XRC receive QP via the RTS2RTS transition, the new timer value was ignored because MLX5_QP_OPTPAR_RNR_TIMEOUT bit was missing from the optional params mask for XRC qps for the RTS2RTS transition. Fix this by adding the missing XRC optional parameters for all QP transitions to the opt_mask table. Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Fixes: a4774e90 ("IB/mlx5: Fix opt param mask according to firmware spec") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Shamir Rabinovitch authored
ib_uverbs_get_context does not have a uobject so it does not call the rdma_lookup_get_uobject which is used to set up the uverbs_attr_bundle ucontext. For ib_uverbs_get_context we need to set up this manually before we send the uverbs_attr_bundle down to the driver layer. This completes the change that was done in commit 70f06b26 ("IB: ucontext should be set properly for all cmd & ioctl paths") Signed-off-by:
Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by:
-
- 02 May, 2019 2 commits
-
-
Gal Pressman authored
Cited commit introduced the udata parameter to different destroy flows but the uapi method definition does not have udata (i.e has_udata flag is not set). As a result, an uninitialized udata struct is being passed down to the driver callbacks. Fix that by clearing the driver udata even in cases where has_udata flag is not set. Fixes: c4367a26 ("IB: Pass uverbs_attr_bundle down ib_x destroy path") Cc: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Co-developed-by:
Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by:
Gal Pressman <galpress@amazon.com> Signed-off-by:
-
Shiraz Saleem authored
The flag update_cur_sg tracks whether contiguous pages from a new set of page_list pages can be merged into the SGE passed into ib_umem_add_sg_table(). If this flag is true, but the total segment length exceeds the max_seg_size supported by HW, we avoid combining to this SGE and move to a new SGE (x) and merge 'len' pages to it. However, if i < npages, the next iteration can incorrectly merge 'len' contiguous pages into x instead of into a new SGE since update_cur_sg is still true. Reset update_cur_sg to false always after the check to merge pages into the first SGE passed in to ib_umem_add_sg_table(). Also, prevent a new SGE's segment length from ever exceeding HW max_seg_sz. There is a crash on hfi1 as result of this where-in max_seg_sz is defaulting to 64K. Due to above bug, unfolding SGE's in __ib_umem_release points to a bad page ptr. TEST comp-wfr.perfnative.STL-22166-WDT _ perftest native 2-Write_4097QP_4MB STARTING at 1555387093 BUG: Bad page state in process ib_write_bw pfn:7ebca0 page:ffffcd675faf2800 count:0 mapcount:1 mapping:0000000000000000 index:0x1 flags: 0x17ffffc0000000() raw: 0017ffffc0000000 dead000000000100 dead000000000200 0000000000000000 raw: 0000000000000001 0000000000000000 0000000000000000 0000000000000000 page dumped because: nonzero mapcount CPU: 18 PID: 15853 Comm: ib_write_bw Tainted: G B 5.1.0-rc4 #1 Hardware name: Intel Corporation S2600CWR/S2600CW, BIOS SE5C610.86B.01.01.0014.121820151719 12/18/2015 Call Trace: dump_stack+0x5a/0x73 bad_page+0xf5/0x10f free_pcppages_bulk+0x62c/0x680 free_unref_page+0x54/0x70 __ib_umem_release+0x148/0x1a0 [ib_uverbs] ib_umem_release+0x22/0x80 [ib_uverbs] rvt_dereg_mr+0x67/0xb0 [rdmavt] ib_dereg_mr_user+0x37/0x60 [ib_core] destroy_hw_idr_uobject+0x1c/0x50 [ib_uverbs] uverbs_destroy_uobject+0x2e/0x180 [ib_uverbs] uobj_destroy+0x4d/0x60 [ib_uverbs] __uobj_get_destroy+0x33/0x50 [ib_uverbs] __uobj_perform_destroy+0xa/0x30 [ib_uverbs] ib_uverbs_dereg_mr+0x66/0x90 [ib_uverbs] ib_uverbs_write+0x3e1/0x500 [ib_uverbs] vfs_write+0xad/0x1b0 ksys_write+0x5a/0xd0 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: d10bcf94 ("RDMA/umem: Combine contiguous PAGE_SIZE regions in SGEs") Tested-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
- 01 May, 2019 1 commit
-
-
Gal Pressman authored
Similarly to dev/netdev/etc printk helpers, add standard printk helpers for the RDMA subsystem. Example output: efa 0000:00:06.0 efa_0: Hello World! efa_0: Hello World! (no parent device set) (NULL ib_device): Hello World! (ibdev is NULL) Cc: Jason Baron <jbaron@akamai.com> Suggested-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
- 25 Apr, 2019 4 commits
-
-
Matthew Wilcox authored
The word 'idr' is scattered throughout the API, so I haven't changed it, but the 'idr' variable is now an XArray. Signed-off-by:
Matthew Wilcox <willy@infradead.org> Signed-off-by:
-
Matthew Wilcox authored
Signed-off-by:
-
Jason Gunthorpe authored
Ariel Levkovich says: ==================== The series exposes the ICM address of the receive transport interface (TIR) of Raw Packet and RSS QPs to the user since they are required to properly create and insert steering rules that direct flows to these QPs. ==================== For dependencies this branch is based on mlx5-next from git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux * branch 'mlx5_tir_icm': IB/mlx5: Expose TIR ICM address to user space net/mlx5: Introduce new TIR creation core API net/mlx5: Expose TIR ICM address in command outbox Signed-off-by:
-
Ariel Levkovich authored
This patch exposes the TIR ICM address of raw packet and RSS QPs to user space. In order to pass the new field, the patch extends the mlx5 specific QP creation response structure and fills it with the icm address returned by the FW command, if available. Signed-off-by:
Ariel Levkovich <lariel@mellanox.com> Signed-off-by:
-
- 24 Apr, 2019 20 commits
-
-
Ariel Levkovich authored
Introducing new TIR creation core API which allows caller to receive back from the call the full command outbox. This comes as a preparation for the next patch that will retrieve the TIR ICM address from the command outbox. Signed-off-by:
Eli Cohen <eli@mellanox.com> Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Ariel Levkovich authored
Adding the TIR ICM address to the create_tir command outbox through which the device reports the ICM address of the newly created TIR. The TIR address can be used for direct attachment to a steering rule in SW managed steering mode. Signed-off-by:
-
Ariel Levkovich authored
Add SW ICM related fields to the device memory capabilities structure and sw ownership capability in flow table properties. The currently supported SW ICM types are steering and header modify and the changes exposes the device memory capabilities for each of these two types. SW ICM memory can be allocated by SW and then be accessed by RDMA operations for direct management of the HW packet handling tables. Signed-off-by:
-
Jason Gunthorpe authored
Jason Gunthorpe says: ==================== Upon review it turns out there are some long standing problems in BAR mapping area: * BAR pages intended for read-only can be switched to writable via mprotect. * Missing use of rdma_user_mmap_io for the mlx5 clock BAR page. * Disassociate causes SIGBUS when touching the pages. * CPU pages are being mapped through to the process via remap_pfn_range instead of the more appropriate vm_insert_page, causing weird behaviors during disassociation. This series adds the missing VM_* flag manipulation, adds faulting a zero page for disassociation and revises the CPU page mappings to use vm_insert_page. ==================== For dependencies this branch is based on for-rc from git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git * branch 'rdma_mmap': RDMA: Remove rdma_user_mmap_page RDMA/mlx5: Use get_zeroed_page() for clock_info RDMA/ucontext: Fix regression with disassociate RDMA/mlx5: Use rdma_user_map_io for mapping BAR pages RDMA/mlx5: Do not allow the user to write to the clock page Signed-off-by:
-
Jason Gunthorpe authored
Upon further research drivers that want this should simply call the core function vm_insert_page(). The VMA holds a reference on the page and it will be automatically freed when the last reference drops. No need for disassociate to sequence the cleanup. Signed-off-by:
-
Jason Gunthorpe authored
get_zeroed_page() returns a virtual address for the page which is better than allocating a struct page and doing a permanent kmap on it. Cc: stable@vger.kernel.org Signed-off-by:
Haggai Eran <haggaie@mellanox.com> Signed-off-by:
-
Jason Gunthorpe authored
When this code was consolidated the intention was that the VMA would become backed by anonymous zero pages after the zap_vma_pte - however this very subtly relied on setting the vm_ops = NULL and clearing the VM_SHARED bits to transform the VMA into an anonymous VMA. Since the vm_ops was removed this broke. Now userspace gets a SIGBUS if it touches the vma after disassociation. Instead of converting the VMA to anonymous provide a fault handler that puts a zero'd page into the VMA when user-space touches it after disassociation. Cc: stable@vger.kernel.org Suggested-by:
Andrea Arcangeli <aarcange@redhat.com> Fixes: 5f9794dc ("RDMA/ucontext: Add a core API for mmaping driver IO memory") Signed-off-by:
-
Jason Gunthorpe authored
Since mlx5 supports device disassociate it must use this API for all BAR page mmaps, otherwise the pages can remain mapped after the device is unplugged causing a system crash. Cc: stable@vger.kernel.org Fixes: 5f9794dc ("RDMA/ucontext: Add a core API for mmaping driver IO memory") Signed-off-by:
-
Jason Gunthorpe authored
The intent of this VMA was to be read-only from user space, but the VM_MAYWRITE masking was missed, so mprotect could make it writable. Cc: stable@vger.kernel.org Fixes: 5c99eaec ("IB/mlx5: Mmap the HCA's clock info to user-space") Signed-off-by:
-
John Fleck authored
The bit VCRCErr in the receive header flag is actually a reserved field. Remove bit operations on this field. Reviewed-by:
John Fleck <john.fleck@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
These counters are required for error analysis and debug. Reviewed-by:
-
Mike Marciniszyn authored
The reference count adjustments on reference count completion are open coded throughout. Add a routine to do all reference count adjustments and use. Reviewed-by:
-
Mike Marciniszyn authored
QP creation already records the allowed_ops. Take advantage of that single field to replace multiple qp_type specific tests. Reviewed-by:
-
Mike Marciniszyn authored
The currently include file ordering for rdmavt headers has an ab/ba include issue the precludes using inlines from rdma_vt.h in rdmavt_qp.h. At the heart of the issue is that rdma_vt.h includes rdmavt_qp.h. Fix the ordering issue by adjusting rdma_vt.h to not require rdmavt_qp.h and move qp related inlines to rdmavt_qp.h. Additionally, promote rvt_mmap_info to rdma_vt.h since it is shared by rdmavt_cq.h and rdmavt_qp.h. Reviewed-by:
-
Mike Marciniszyn authored
The opfn.h include file build-ablility depends on the including file having the correct includes. Fix by making opfn.h self sufficient. Reviewed-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
-
Kaike Wan authored
This patch fixes miscellaneous comment errors. Reviewed-by:
-
Josh Collier authored
Some kernels now enable CONFIG_IO_STRICT_DEVMEM which prevents multiple handles to PCI resource0. In order to continue to support expansion ROM updates while the driver is loaded, the driver must now provide an interface to control the expansion ROM write protection. This patch adds an exprom_wp debugfs interface that allows the hfi1_eprom user tool to disable the expansion ROM write protection by opening the file and writing a '1'. The write protection is released when writing a '0' or automatically re-enabled when the file handle is closed. The current implementation will only allow one handle to be opened at a time across all hfi1 devices. Reviewed-by:
Josh Collier <josh.d.collier@intel.com> Signed-off-by:
-
Leon Romanovsky authored
Verbs destroy callbacks are synchronous operations and can't be delayed. The expectation is that after driver returned from destroy function, the memory can be freed and user won't be able to access it again. Ditch workqueue implementation used in HNS driver. Fixes: d838c481 ("IB/hns: Fix the bug when destroy qp") Signed-off-by:
oulijun <oulijun@huawei.com> Signed-off-by:
-
Parav Pandit authored
When two netdev have same link local addresses (such as vlan and non vlan), two rdma cm listen id should be able to bind to following different addresses. listener-1: addr=lla, scope_id=A, port=X listener-2: addr=lla, scope_id=B, port=X However while comparing the addresses only addr and port are considered, due to which 2nd listener fails to listen. In below example of two listeners, 2nd listener is failing with address in use error. $ rping -sv -a fe80::268a:7ff:feb3:d113%ens2f1 -p 4545& $ rping -sv -a fe80::268a:7ff:feb3:d113%ens2f1.200 -p 4545 rdma_bind_addr: Address already in use To overcome this, consider the scope_ids as well which forms the accurate IPv6 link local address. Signed-off-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
-
Parav Pandit authored
IPv6 link local address for a VLAN netdevice has nothing to do with its resemblance with the default GID, because VLAN link local GID is in different layer 2 domain. Now that RoCE MAD packet processing and route resolution consider the right GID index, there is no need for an unnecessary check which prevents the addition of vlan based IPv6 link local GIDs. Signed-off-by:
-
- 22 Apr, 2019 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linuxSaeed Mahameed authored
Linux 5.1-rc1 We forgot to reset the branch last merge window thus mlx5-next is outdated and still based on 5.0-rc2. This merge commit is needed to sync mlx5-next branch with 5.1-rc1. Signed-off-by: -
Mark Bloch authored
Switchdev mode and mutiport RoCE mode aren't compatible at this point. Don't create IB reps when a user switches to switchdev mode and the driver operates in that mode. Signed-off-by:
-
