Previously phy_id was u32 and phy_id_mask was unsigned int. As the
phy_id_mask defines the important bits of the phy_id (and is therefore
the same size) these two variables should be the same data type.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

No need to reinvent the wheel, we have bus_find_device_by_name().

Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

on T81 there are only 4 cores, hence setting max queue count to 4
would leave nothing for XDP_TX. This patch fixes this by doubling
max queue count in above scenarios.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: cjacob <cjacob@caviumnetworks.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for XDP_REDIRECT. Flush is not
yet supported.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: cjacob <cjacob@caviumnetworks.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull nfsd fixes from Bruce Fields:
 "I screwed up my merge window pull request; I only sent half of what I
  meant to.

  There were no new features, just bugfixes of various importance and
  some very minor cleanup, so I think it's all still appropriate for
  -rc2.

  Highlights:

   - Fixes from Trond for some races in the NFSv4 state code.

   - Fix from Naofumi Honda for a typo in the blocked lock notificiation
     code

   - Fixes from Vasily Averin for some problems starting and stopping
     lockd especially in network namespaces"

* tag 'nfsd-4.15-1' of git://linux-nfs.org/~bfields/linux: (23 commits)
  lockd: fix "list_add double add" caused by legacy signal interface
  nlm_shutdown_hosts_net() cleanup
  race of nfsd inetaddr notifiers vs nn->nfsd_serv change
  race of lockd inetaddr notifiers vs nlmsvc_rqst change
  SUNRPC: make cache_detail structures const
  NFSD: make cache_detail structures const
  sunrpc: make the function arg as const
  nfsd: check for use of the closed special stateid
  nfsd: fix panic in posix_unblock_lock called from nfs4_laundromat
  lockd: lost rollback of set_grace_period() in lockd_down_net()
  lockd: added cleanup checks in exit_net hook
  grace: replace BUG_ON by WARN_ONCE in exit_net hook
  nfsd: fix locking validator warning on nfs4_ol_stateid->st_mutex class
  lockd: remove net pointer from messages
  nfsd: remove net pointer from debug messages
  nfsd: Fix races with check_stateid_generation()
  nfsd: Ensure we check stateid validity in the seqid operation checks
  nfsd: Fix race in lock stateid creation
  nfsd4: move find_lock_stateid
  nfsd: Ensure we don't recognise lock stateids after freeing them
  ...

Pull btrfs fixes from David Sterba:
 "We've collected some fixes in since the pre-merge window freeze.

  There's technically only one regression fix for 4.15, but the rest
  seems important and candidates for stable.

   - fix missing flush bio puts in error cases (is serious, but rarely
     happens)

   - fix reporting stat::st_blocks for buffered append writes

   - fix space cache invalidation

   - fix out of bound memory access when setting zlib level

   - fix potential memory corruption when fsync fails in the middle

   - fix crash in integrity checker

   - incremetnal send fix, path mixup for certain unlink/rename
     combination

   - pass flags to writeback so compressed writes can be throttled
     properly

   - error handling fixes"

* tag 'for-4.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: incremental send, fix wrong unlink path after renaming file
  btrfs: tree-checker: Fix false panic for sanity test
  Btrfs: fix list_add corruption and soft lockups in fsync
  btrfs: Fix wild memory access in compression level parser
  btrfs: fix deadlock when writing out space cache
  btrfs: clear space cache inode generation always
  Btrfs: fix reported number of inode blocks after buffered append writes
  Btrfs: move definition of the function btrfs_find_new_delalloc_bytes
  Btrfs: bail out gracefully rather than BUG_ON
  btrfs: dev_alloc_list is not protected by RCU, use normal list_del
  btrfs: add missing device::flush_bio puts
  btrfs: Fix transaction abort during failure in btrfs_rm_dev_item
  Btrfs: add write_flags for compression bio

Pull Microblaze fix from Michal Simek:
 "Add missing header to mmu_context_mm.h"

* tag 'microblaze-4.15-rc2' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: add missing include to mmu_context_mm.h

Pull sparc fix from David Miller:
 "Sparc T4 and later cpu bootup regression fix"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix boot on T4 and later.

Pull networking fixes from David Miller:

 1) The forcedeth conversion from pci_*() DMA interfaces to dma_*() ones
    missed one spot. From Zhu Yanjun.

 2) Missing CRYPTO_SHA256 Kconfig dep in cfg80211, from Johannes Berg.

 3) Fix checksum offloading in thunderx driver, from Sunil Goutham.

 4) Add SPDX to vm_sockets_diag.h, from Stephen Hemminger.

 5) Fix use after free of packet headers in TIPC, from Jon Maloy.

 6) "sizeof(ptr)" vs "sizeof(*ptr)" bug in i40e, from Gustavo A R Silva.

 7) Tunneling fixes in mlxsw driver, from Petr Machata.

 8) Fix crash in fanout_demux_rollover() of AF_PACKET, from Mike
    Maloney.

 9) Fix race in AF_PACKET bind() vs. NETDEV_UP notifier, from Eric
    Dumazet.

10) Fix regression in sch_sfq.c due to one of the timer_setup()
    conversions. From Paolo Abeni.

11) SCTP does list_for_each_entry() using wrong struct member, fix from
    Xin Long.

12) Don't use big endian netlink attribute read for
    IFLA_BOND_AD_ACTOR_SYSTEM, it is in cpu endianness. Also from Xin
    Long.

13) Fix mis-initialization of q->link.clock in CBQ scheduler, preventing
    adding filters there. From Jiri Pirko.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits)
  ethernet: dwmac-stm32: Fix copyright
  net: via: via-rhine: use %p to format void * address instead of %x
  net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bit
  myri10ge: Update MAINTAINERS
  net: sched: cbq: create block for q->link.block
  atm: suni: remove extraneous space to fix indentation
  atm: lanai: use %p to format kernel addresses instead of %x
  VSOCK: Don't set sk_state to TCP_CLOSE before testing it
  atm: fore200e: use %pK to format kernel addresses instead of %x
  ambassador: fix incorrect indentation of assignment statement
  vxlan: use __be32 type for the param vni in __vxlan_fdb_delete
  bonding: use nla_get_u64 to extract the value for IFLA_BOND_AD_ACTOR_SYSTEM
  sctp: use right member as the param of list_for_each_entry
  sch_sfq: fix null pointer dereference at timer expiration
  cls_bpf: don't decrement net's refcount when offload fails
  net/packet: fix a race in packet_bind() and packet_notifier()
  packet: fix crash in fanout_demux_rollover()
  sctp: remove extern from stream sched
  sctp: force the params with right types for sctp csum apis
  sctp: force SCTP_ERROR_INV_STRM with __u32 when calling sctp_chunk_fail
  ...

If we don't put the NG4fls.o object into the same part of
the link as the generic sparc64 objects for fls() and __fls()
then the relocation in the branch we use for patching will
not fit.

Move NG4fls.o into lib-y to fix this problem.

Fixes: 46ad8d2d ("sparc64: Use sparc optimized fls and __fls for T4 and above")
Signed-off-by: David S. Miller <davem@davemloft.net>
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>

Instead, just fall back on the new '%p' behavior which hashes the
pointer.

Otherwise, '%pK' - that was intended to mark a pointer as restricted -
just ends up leaking pointers that a normal '%p' wouldn't leak.  Which
just make the whole thing pointless.

I suspect we should actually get rid of '%pK' entirely, and make it just
work as '%p' regardless, but this is the minimal obvious fix.  People
who actually use 'kptr_restrict' should weigh in on which behavior they
want.

Cc: Tobin Harding <me@tobin.cc>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The conditional kallsym hex printing used a special fixed-width '%lx'
output (KALLSYM_FMT) in preparation for the hashing of %p, but that
series ended up adding a %px specifier to help with the conversions.

Use it, and avoid the "print pointer as an unsigned long" code.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull printk pointer hashing update from Tobin Harding:
 "Here is the patch set that implements hashing of printk specifier %p.

  First we have two clean up patches then we do the hashing. Hashing is
  done via the SipHash algorithm. The next patch adds printk specifier
  %px for printing pointers when we _really_ want to see the address i.e
  %px is functionally equivalent to %lx. Final patch in the set fixes
  KASAN since we break it by hashing %p.

  For the record here is the justification for the series:

    Currently there exist approximately 14 000 places in the Kernel
    where addresses are being printed using an unadorned %p. This
    potentially leaks sensitive information about the Kernel layout in
    memory. Many of these calls are stale, instead of fixing every call
    we hash the address by default before printing. We then add %px to
    provide a way to print the actual address. Although this is
    achievable using %lx, using %px will assist us if we ever want to
    change pointer printing behaviour. %px is more uniquely grep'able
    (there are already >50 000 uses of %lx).

    The added advantage of hashing %p is that security is now opt-out,
    if you _really_ want the address you have to work a little harder
    and use %px.

  This will of course break some users, forcing code printing needed
  addresses to be updated"

[ I do expect this to be an annoyance, and a number of %px users to be
  added for debuggability. But nobody is willing to audit existing %p
  users for information leaks, and a number of places really only use
  the pointer as an object identifier rather than really 'I need the
  address'.

  IOW - sorry for the inconvenience, but it's the least inconvenient of
  the options.    - Linus ]

* tag 'printk-hash-pointer-4.15-rc2' of git://github.com/tcharding/linux:
  kasan: use %px to print addresses instead of %p
  vsprintf: add printk specifier %px
  printk: hash addresses printed with %p
  vsprintf: refactor %pK code out of pointer()
  docs: correct documentation for %pK

This reverts commit 152e93af.

It was a nice cleanup in theory, but as Nicolai Stange points out, we do
need to make the page dirty for the copy-on-write case even when we
didn't end up making it writable, since the dirty bit is what we use to
check that we've gone through a COW cycle.
Reported-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Uniformize STMicroelectronics copyrights header
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
CC: Alexandre Torgue <alexandre.torgue@st.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't use %x and casting to print out an address, instead use %p
and remove the casting.  Cleans up smatch warnings:

drivers/net/ethernet/via/via-rhine.c:998 rhine_init_one_common()
warn: argument 4 to %lx specifier is cast from pointer
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On 64-bit (e.g. powerpc64/allmodconfig):

    drivers/net/ethernet/xilinx/ll_temac_main.c: In function 'temac_start_xmit_done':
    drivers/net/ethernet/xilinx/ll_temac_main.c:633:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
	dev_kfree_skb_irq((struct sk_buff *)cur_p->app4);
			  ^

cdmac_bd.app4 is u32, so it is too small to hold a kernel pointer.

Note that several other fields in struct cdmac_bd are also too small to
hold physical addresses on 64-bit platforms.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change the maintainer to Chris Lee who has access to Myricom hardware
and can test/review. Update the website URL.
Signed-off-by: Hyong-Youb Kim <hykim@myri.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pointers printed with %p are now hashed by default. Kasan needs the
actual address. We can use the new printk specifier %px for this
purpose.

Use %px instead of %p to print addresses.
Signed-off-by: Tobin C. Harding <me@tobin.cc>

printk specifier %p now hashes all addresses before printing. Sometimes
we need to see the actual unmodified address. This can be achieved using
%lx but then we face the risk that if in future we want to change the
way the Kernel handles printing of pointers we will have to grep through
the already existent 50 000 %lx call sites. Let's add specifier %px as a
clear, opt-in, way to print a pointer and maintain some level of
isolation from all the other hex integer output within the Kernel.

Add printk specifier %px to print the actual unmodified address.
Signed-off-by: Tobin C. Harding <me@tobin.cc>

Currently there exist approximately 14 000 places in the kernel where
addresses are being printed using an unadorned %p. This potentially
leaks sensitive information regarding the Kernel layout in memory. Many
of these calls are stale, instead of fixing every call lets hash the
address by default before printing. This will of course break some
users, forcing code printing needed addresses to be updated.

Code that _really_ needs the address will soon be able to use the new
printk specifier %px to print the address.

For what it's worth, usage of unadorned %p can be broken down as
follows (thanks to Joe Perches).

$ git grep -E '%p[^A-Za-z0-9]' | cut -f1 -d"/" | sort | uniq -c
   1084 arch
     20 block
     10 crypto
     32 Documentation
   8121 drivers
   1221 fs
    143 include
    101 kernel
     69 lib
    100 mm
   1510 net
     40 samples
      7 scripts
     11 security
    166 sound
    152 tools
      2 virt

Add function ptr_to_id() to map an address to a 32 bit unique
identifier. Hash any unadorned usage of specifier %p and any malformed
specifiers.
Signed-off-by: Tobin C. Harding <me@tobin.cc>

Currently code to handle %pK is all within the switch statement in
pointer(). This is the wrong level of abstraction. Each of the other switch
clauses call a helper function, pK should do the same.

Refactor code out of pointer() to new function restricted_pointer().
Signed-off-by: Tobin C. Harding <me@tobin.cc>

Current documentation indicates that %pK prints a leading '0x'. This is
not the case.

Correct documentation for printk specifier %pK.
Signed-off-by: Tobin C. Harding <me@tobin.cc>

Pull crypto fixes from Herbert Xu:

 - avoid potential bogus alignment for some AEAD operations

 - fix crash in algif_aead

 - avoid sleeping in softirq context with async af_alg

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: skcipher - Fix skcipher_walk_aead_common
  crypto: af_alg - remove locking in async callback
  crypto: algif_aead - skip SGL entries with NULL page

q->link.block is not initialized, that leads to EINVAL when one tries to
add filter there. So initialize it properly.

This can be reproduced by:
$ tc qdisc add dev eth0 root handle 1: cbq avpkt 1000 rate 1000Mbit bandwidth 1000Mbit
$ tc filter add dev eth0 parent 1: protocol ip prio 100 u32 match ip protocol 0 0x00 flowid 1:1
Reported-by: Jaroslav Aster <jaster@redhat.com>
Reported-by: Ivan Vecera <ivecera@redhat.com>
Fixes: 6529eaba ("net: sched: introduce tcf block infractructure")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove a leading space, fixes indentation
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't use %x and casting to print out a kernel address, instead use %p
and remove the casting.  Cleans up smatch warnings:

drivers/atm/lanai.c:1589 service_buffer_allocate() warn: argument 2 to
%08lX specifier is cast from pointer
drivers/atm/lanai.c:2221 lanai_dev_open() warn: argument 4 to %lx
specifier is cast from pointer
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A recent commit (3b4477d2) converted the sk_state to use
TCP constants. In that change, vmci_transport_handle_detach
was changed such that sk->sk_state was set to TCP_CLOSE before
we test whether it is TCP_SYN_SENT. This change moves the
sk_state change back to the original locations in that function.
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't use %x and casting to print out a kernel address, instead use the
%pK and remove the casting.  Cleans up smatch warning:

drivers/atm/fore200e.c:3093 fore200e_proc_read() warn: argument 3 to %08x
specifier is cast from pointer
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove one extraneous level of indentation on assignment statement.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

All callers of __vxlan_fdb_delete pass vni with __be32 type, and
this param should be declared as __be32 type.

Fixes: 3ad7a4b1 ("vxlan: support fdb and learning in COLLECT_METADATA mode")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bond_opt_initval expects a u64 type param, it's better to use
nla_get_u64 to extract the value here, to eliminate a sparse
endianness mismatch warning.

Fixes: 171a42c3 ("bonding: add netlink support for sys prio, actor sys mac, and port key")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit d04adf1b ("sctp: reset owner sk for data chunks on out queues
when migrating a sock") made a mistake that using 'list' as the param of
list_for_each_entry to traverse the retransmit, sacked and abandoned
queues, while chunks are using 'transmitted_list' to link into these
queues.

It could cause NULL dereference panic if there are chunks in any of these
queues when peeling off one asoc.

So use the chunk member 'transmitted_list' instead in this patch.

Fixes: d04adf1b ("sctp: reset owner sk for data chunks on out queues when migrating a sock")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While converting sch_sfq to use timer_setup(), the commit cdeabbb8
("net: sched: Convert timers to use timer_setup()") forgot to
initialize the 'sch' field. As a result, the timer callback tries to
dereference a NULL pointer, and the kernel does oops.

Fix it initializing such field at qdisc creation time.

Fixes: cdeabbb8 ("net: sched: Convert timers to use timer_setup()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When cls_bpf offload was added it seemed like a good idea to
call cls_bpf_delete_prog() instead of extending the error
handling path, since the software state is fully initialized
at that point.  This handling of errors without jumping to
the end of the function is error prone, as proven by later
commit missing that extra call to __cls_bpf_delete_prog().

__cls_bpf_delete_prog() is now expected to be invoked with
a reference on exts->net or the field zeroed out.  The call
on the offload's error patch does not fullfil this requirement,
leading to each error stealing a reference on net namespace.

Create a function undoing what cls_bpf_set_parms() did and
use it from __cls_bpf_delete_prog() and the error path.

Fixes: aae2c35e ("cls_bpf: use tcf_exts_get_net() before call_rcu()")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull drm fixes from Dave Airlie:

 - TTM regression fix for some virt gpus (bochs vga)

 - a few i915 stable fixes

 - one vc4 fix

 - one uapi fix

* tag 'drm-for-v4.15-part2-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/ttm: don't attempt to use hugepages if dma32 requested (v2)
  drm/vblank: Pass crtc_id to page_flip_ioctl.
  drm/i915: Fix init_clock_gating for resume
  drm/i915: Mark the userptr invalidate workqueue as WQ_MEM_RECLAIM
  drm/i915: Clear breadcrumb node when cancelling signaling
  drm/i915/gvt: ensure -ve return value is handled correctly
  drm/i915: Re-register PMIC bus access notifier on runtime resume
  drm/i915: Fix false-positive assert_rpm_wakelock_held in i915_pmic_bus_access_notifier v2
  drm/edid: Don't send non-zero YQ in AVI infoframe for HDMI 1.x sinks
  drm/vc4: Account for interrupts in flight

The commit 8428a8eb ("ALSA: usb-audio: Fix potential zero-division
at parsing FU") is utterly bogus and breaks the case with csize=1
instead of fixing anything.  Just take it back again.
Reported-by: Jörg Otte <jrg.otte@gmail.com>
Fixes: 8428a8eb ("ALSA: usb-audio: Fix potential zero-division at parsing FU"
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Under some circumstances, an incremental send operation can issue wrong
paths for unlink commands related to files that have multiple hard links
and some (or all) of those links were renamed between the parent and send
snapshots. Consider the following example:

Parent snapshot

 .                                                      (ino 256)
 |---- a/                                               (ino 257)
 |     |---- b/                                         (ino 259)
 |     |     |---- c/                                   (ino 260)
 |     |     |---- f2                                   (ino 261)
 |     |
 |     |---- f2l1                                       (ino 261)
 |
 |---- d/                                               (ino 262)
       |---- f1l1_2                                     (ino 258)
       |---- f2l2                                       (ino 261)
       |---- f1_2                                       (ino 258)

Send snapshot

 .                                                      (ino 256)
 |---- a/                                               (ino 257)
 |     |---- f2l1/                                      (ino 263)
 |             |---- b2/                                (ino 259)
 |                   |---- c/                           (ino 260)
 |                   |     |---- d3                     (ino 262)
 |                   |           |---- f1l1_2           (ino 258)
 |                   |           |---- f2l2_2           (ino 261)
 |                   |           |---- f1_2             (ino 258)
 |                   |
 |                   |---- f2                           (ino 261)
 |                   |---- f1l2                         (ino 258)
 |
 |---- d                                                (ino 261)

When computing the incremental send stream the following steps happen:

1) When processing inode 261, a rename operation is issued that renames
   inode 262, which currently as a path of "d", to an orphan name of
   "o262-7-0". This is done because in the send snapshot, inode 261 has
   of its hard links with a path of "d" as well.

2) Two link operations are issued that create the new hard links for
   inode 261, whose names are "d" and "f2l2_2", at paths "/" and
   "o262-7-0/" respectively.

3) Still while processing inode 261, unlink operations are issued to
   remove the old hard links of inode 261, with names "f2l1" and "f2l2",
   at paths "a/" and "d/". However path "d/" does not correspond anymore
   to the directory inode 262 but corresponds instead to a hard link of
   inode 261 (link command issued in the previous step). This makes the
   receiver fail with a ENOTDIR error when attempting the unlink
   operation.

The problem happens because before sending the unlink operation, we failed
to detect that inode 262 was one of ancestors for inode 261 in the parent
snapshot, and therefore we didn't recompute the path for inode 262 before
issuing the unlink operation for the link named "f2l2" of inode 262. The
detection failed because the function "is_ancestor()" only follows the
first hard link it finds for an inode instead of all of its hard links
(as it was originally created for being used with directories only, for
which only one hard link exists). So fix this by making "is_ancestor()"
follow all hard links of the input inode.

A test case for fstests follows soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

syzbot reported crashes [1] and provided a C repro easing bug hunting.

When/if packet_do_bind() calls __unregister_prot_hook() and releases
po->bind_lock, another thread can run packet_notifier() and process an
NETDEV_UP event.

This calls register_prot_hook() and hooks again the socket right before
first thread is able to grab again po->bind_lock.

Fixes this issue by temporarily setting po->num to 0, as suggested by
David Miller.

[1]
dev_remove_pack: ffff8801bf16fa80 not found
------------[ cut here ]------------
kernel BUG at net/core/dev.c:7945!  ( BUG_ON(!list_empty(&dev->ptype_all)); )
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
device syz0 entered promiscuous mode
CPU: 0 PID: 3161 Comm: syzkaller404108 Not tainted 4.14.0+ #190
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
task: ffff8801cc57a500 task.stack: ffff8801cc588000
RIP: 0010:netdev_run_todo+0x772/0xae0 net/core/dev.c:7945
RSP: 0018:ffff8801cc58f598 EFLAGS: 00010293
RAX: ffff8801cc57a500 RBX: dffffc0000000000 RCX: ffffffff841f75b2
RDX: 0000000000000000 RSI: 1ffff100398b1ede RDI: ffff8801bf1f8810
device syz0 entered promiscuous mode
RBP: ffff8801cc58f898 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801bf1f8cd8
R13: ffff8801cc58f870 R14: ffff8801bf1f8780 R15: ffff8801cc58f7f0
FS:  0000000001716880(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020b13000 CR3: 0000000005e25000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:106
 tun_detach drivers/net/tun.c:670 [inline]
 tun_chr_close+0x49/0x60 drivers/net/tun.c:2845
 __fput+0x333/0x7f0 fs/file_table.c:210
 ____fput+0x15/0x20 fs/file_table.c:244
 task_work_run+0x199/0x270 kernel/task_work.c:113
 exit_task_work include/linux/task_work.h:22 [inline]
 do_exit+0x9bb/0x1ae0 kernel/exit.c:865
 do_group_exit+0x149/0x400 kernel/exit.c:968
 SYSC_exit_group kernel/exit.c:979 [inline]
 SyS_exit_group+0x1d/0x20 kernel/exit.c:977
 entry_SYSCALL_64_fastpath+0x1f/0x96
RIP: 0033:0x44ad19

Fixes: 30f7ea1c ("packet: race condition in packet_bind")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Francesco Ruggeri <fruggeri@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzkaller found a race condition fanout_demux_rollover() while removing
a packet socket from a fanout group.

po->rollover is read and operated on during packet_rcv_fanout(), via
fanout_demux_rollover(), but the pointer is currently cleared before the
synchronization in packet_release().   It is safer to delay the cleanup
until after synchronize_net() has been called, ensuring all calls to
packet_rcv_fanout() for this socket have finished.

To further simplify synchronization around the rollover structure, set
po->rollover in fanout_add() only if there are no errors.  This removes
the need for rcu in the struct and in the call to
packet_getsockopt(..., PACKET_ROLLOVER_STATS, ...).

Crashing stack trace:
 fanout_demux_rollover+0xb6/0x4d0 net/packet/af_packet.c:1392
 packet_rcv_fanout+0x649/0x7c8 net/packet/af_packet.c:1487
 dev_queue_xmit_nit+0x835/0xc10 net/core/dev.c:1953
 xmit_one net/core/dev.c:2975 [inline]
 dev_hard_start_xmit+0x16b/0xac0 net/core/dev.c:2995
 __dev_queue_xmit+0x17a4/0x2050 net/core/dev.c:3476
 dev_queue_xmit+0x17/0x20 net/core/dev.c:3509
 neigh_connected_output+0x489/0x720 net/core/neighbour.c:1379
 neigh_output include/net/neighbour.h:482 [inline]
 ip6_finish_output2+0xad1/0x22a0 net/ipv6/ip6_output.c:120
 ip6_finish_output+0x2f9/0x920 net/ipv6/ip6_output.c:146
 NF_HOOK_COND include/linux/netfilter.h:239 [inline]
 ip6_output+0x1f4/0x850 net/ipv6/ip6_output.c:163
 dst_output include/net/dst.h:459 [inline]
 NF_HOOK.constprop.35+0xff/0x630 include/linux/netfilter.h:250
 mld_sendpack+0x6a8/0xcc0 net/ipv6/mcast.c:1660
 mld_send_initial_cr.part.24+0x103/0x150 net/ipv6/mcast.c:2072
 mld_send_initial_cr net/ipv6/mcast.c:2056 [inline]
 ipv6_mc_dad_complete+0x99/0x130 net/ipv6/mcast.c:2079
 addrconf_dad_completed+0x595/0x970 net/ipv6/addrconf.c:4039
 addrconf_dad_work+0xac9/0x1160 net/ipv6/addrconf.c:3971
 process_one_work+0xbf0/0x1bc0 kernel/workqueue.c:2113
 worker_thread+0x223/0x1990 kernel/workqueue.c:2247
 kthread+0x35e/0x430 kernel/kthread.c:231
 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:432

Fixes: 0648ab70 ("packet: rollover prepare: per-socket state")
Fixes: 509c7a1e ("packet: avoid panic in packet_getsockopt()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Mike Maloney <maloney@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>