- 10 Dec, 2019 40 commits
-
-
James Smart authored
BugLink: https://bugs.launchpad.net/bugs/1855313 [ Upstream commit 7c4042a4 ] When dif and first burst is used in a write command wqe, the driver was not properly setting fields in the io command request. This resulted in no dif bytes being sent and invalid xfer_rdy's, resulting in the io being aborted by the hardware. Correct the wqe initializaton when both dif and first burst are used. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1855313 [ Upstream commit 8e9c5230 ] There are two callers of this function and they both unlock the mutex so this ends up being a double unlock. Fixes: 44ed167d ("drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Ilya Leoshkevich authored
BugLink: https://bugs.launchpad.net/bugs/1855313 [ Upstream commit 8731acc5 ] gcc's -freorder-blocks-and-partition option makes it group frequently and infrequently used code in .text.hot and .text.unlikely sections respectively. At least when building modules on s390, this option is used by default. gdb assumes that all code is located in .text section, and that .text section is located at module load address. With such modules this is no longer the case: there is code in .text.hot and .text.unlikely, and either of them might precede .text. Fix by explicitly telling gdb the addresses of code sections. It might be tempting to do this for all sections, not only the ones in the white list. Unfortunately, gdb appears to have an issue, when telling it about e.g. loadable .note.gnu.build-id section causes it to think that non-loadable .note.Linux section is loaded at address 0, which in turn causes NULL pointers to be resolved to bogus symbols. So keep using the white list approach for the time being. Link: http://lkml.kernel.org/r/20191028152734.13065-1-iii@linux.ibm.comSigned-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by:
Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jeroen Hofstee authored
BugLink: https://bugs.launchpad.net/bugs/1855313 [ Upstream commit 23c5a948 ] When the CAN interface is closed it the hardwre is put in power down mode, but does not reset the error counters / state. Reset the D_CAN on open, so the reported state and the actual state match. According to [1], the C_CAN module doesn't have the software reset. [1] http://www.bosch-semiconductors.com/media/ip_modules/pdf_2/c_can_fd8/users_manual_c_can_fd8_r210_1.pdfSigned-off-by:
Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Jeroen Hofstee authored
BugLink: https://bugs.launchpad.net/bugs/1855313 [ Upstream commit 128a1b87 ] While the state changes are reported when the error counters increase and decrease, there is no event when the bus recovers and the error counters decrease again. So add those as well. Change the state going downward to be ERROR_PASSIVE -> ERROR_WARNING -> ERROR_ACTIVE instead of directly to ERROR_ACTIVE again. Signed-off-by:
-
Randy Dunlap authored
BugLink: https://bugs.launchpad.net/bugs/1855313 [ Upstream commit f430c7ed ] Add a missing short description to the reset_control_ops documentation. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> [p.zabel@pengutronix.de: rebased and updated commit message] Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Marek Szyprowski authored
BugLink: https://bugs.launchpad.net/bugs/1855313 [ Upstream commit e9323b66 ] Properly save and restore all top PLL related configuration registers during suspend/resume cycle. So far driver only handled EPLL and RPLL clocks, all other were reset to default values after suspend/resume cycle. This caused for example lower G3D (MALI Panfrost) performance after system resume, even if performance governor has been selected. Reported-by:
Reported-by: Marian Mihailescu <mihailescu2m@gmail.com> Fixes: 77342432 ("clk: samsung: exynos5420: add more registers to restore list") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Russell King authored
BugLink: https://bugs.launchpad.net/bugs/1855313 [ Upstream commit 4523817d ] When our call to get the external clock fails, we forget to clean up the enabled internal clock correctly. Enable the clock after we have obtained all our resources. Fixes: 84aac6c7 ("ASoC: kirkwood: fix loss of external clock at probe time") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1iNGyK-0004oF-6A@rmk-PC.armlinux.org.ukSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Xiaojun Sang authored
BugLink: https://bugs.launchpad.net/bugs/1855313 [ Upstream commit d3645b05 ] Parameter fragments and fragment_size are type of u32. U32_MAX is the correct check. Signed-off-by:
Xiaojun Sang <xsang@codeaurora.org> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by:
Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20191021095432.5639-1-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Connor Kuehl authored
BugLink: https://bugs.launchpad.net/bugs/1854857 Ignore: yes Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1854857Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1854857 This reverts commit 4c5ce7ca90e00164f954d727215fc227addc467c which is commit 50254256 upstream. It breaks a number of runtime Android networking tests, so something is wrong with the backport, or something else also needed to be backported at the same time. So I'm dropping this from the tree as regressions are not good. Cc: David Barmann <david.barmann@stackpath.com> Cc: Eric Dumazet <edumazet@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Connor Kuehl authored
BugLink: https://bugs.launchpad.net/bugs/1854855 Ignore: yes Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1854855Signed-off-by:
-
Bernd Porr authored
BugLink: https://bugs.launchpad.net/bugs/1854855 commit 5618332e upstream. The userspace comedilib function 'get_cmd_generic_timed' fills the cmd structure with an informed guess and then calls the function 'usbduxfast_ai_cmdtest' in this driver repeatedly while 'usbduxfast_ai_cmdtest' is modifying the cmd struct until it no longer changes. However, because of rounding errors this never converged because 'steps = (cmd->convert_arg * 30) / 1000' and then back to 'cmd->convert_arg = (steps * 1000) / 30' won't be the same because of rounding errors. 'Steps' should only be converted back to the 'convert_arg' if 'steps' has actually been modified. In addition the case of steps being 0 wasn't checked which is also now done. Signed-off-by:
Bernd Porr <mail@berndporr.me.uk> Cc: <stable@vger.kernel.org> # 4.4+ Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20191118230759.1727-1-mail@berndporr.me.ukSigned-off-by:
-
Aleksander Morgado authored
BugLink: https://bugs.launchpad.net/bugs/1854855 commit f0797095 upstream. These are the Foxconn-branded variants of the Dell DW5821e modules, same USB layout as those. The device exposes AT, NMEA and DIAG ports in both USB configurations. P: Vendor=0489 ProdID=e0b4 Rev=03.18 S: Manufacturer=FII S: Product=T77W968 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option P: Vendor=0489 ProdID=e0b4 Rev=03.18 S: Manufacturer=FII S: Product=T77W968 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by:
Aleksander Morgado <aleksander@aleksander.es> [ johan: drop id defines ] Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Aleksander Morgado authored
BugLink: https://bugs.launchpad.net/bugs/1854855 commit 957c31ea upstream. The device exposes AT, NMEA and DIAG ports in both USB configurations. Exactly same layout as the default DW5821e module, just a different vid/pid. P: Vendor=413c ProdID=81e0 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5821e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option P: Vendor=413c ProdID=81e0 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5821e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1854855 commit 92fe35fb upstream. The driver was setting the device remote-wakeup feature during probe in violation of the USB specification (which says it should only be set just prior to suspending the device). This could potentially waste power during suspend as well as lead to spurious wakeups. Note that USB core would clear the remote-wakeup feature at first resume. Fixes: 3f542974 ("USB: Moschip 7840 USB-Serial Driver") Cc: stable <stable@vger.kernel.org> # 2.6.19 Reviewed-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1854855 commit ea422312 upstream. The driver was setting the device remote-wakeup feature during probe in violation of the USB specification (which says it should only be set just prior to suspending the device). This could potentially waste power during suspend as well as lead to spurious wakeups. Note that USB core would clear the remote-wakeup feature at first resume. Fixes: 0f64478c ("USB: add USB serial mos7720 driver") Cc: stable <stable@vger.kernel.org> # 2.6.19 Reviewed-by:
-
Pavel Löbl authored
BugLink: https://bugs.launchpad.net/bugs/1854855 commit e696d00e upstream. Add USB ID for MOXA UPort 2210. This device contains mos7820 but it passes GPIO0 check implemented by driver and it's detected as mos7840. Hence product id check is added to force mos7820 mode. Signed-off-by:
Pavel Löbl <pavel@loebl.cz> Cc: stable <stable@vger.kernel.org> [ johan: rename id defines and add vendor-id check ] Signed-off-by:
-
Oliver Neukum authored
BugLink: https://bugs.launchpad.net/bugs/1854855 commit 91feb015 upstream. The work item can operate on 1. stale memory left over from the last transfer the actual length of the data transfered needs to be checked 2. memory already freed the error handling in appledisplay_probe() needs to cancel the work in that case Reported-and-tested-by: syzbot+495dab1f175edc9c2f13@syzkaller.appspotmail.com Signed-off-by:
Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191106124902.7765-1-oneukum@suse.comSigned-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1854855 commit 347bc8cb upstream. Add support for the Mark-10 digital force gauge device to the cp201x driver. Based on a report and a larger patch from Joel Jennings Reported-by:
Joel Jennings <joel.jennings@makeitlabs.com> Cc: stable <stable@vger.kernel.org> Acked-by:
-
Michael S. Tsirkin authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit aa44ec86 ] Will make it reusable for error handling. Cc: stable@vger.kernel.org Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Michael S. Tsirkin authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 61a8950c ] We now cleanup all VQs on device removal - no need to handle the control VQ specially. Cc: stable@vger.kernel.org Signed-off-by:
-
Michael S. Tsirkin authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 2055997f ] We try to disable callbacks on c_ivq even without multiport even though that vq is not initialized in this configuration. Fixes: c743d09d ("virtio: console: Disable callbacks for virtqueues at start of S4 freeze") Suggested-by:
Mike Galbraith <efault@gmx.de> Signed-off-by:
-
Laurent Vivier authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit d791cfcb ] When we hot unplug a virtserialport and then try to hot plug again, it fails: (qemu) chardev-add socket,id=serial0,path=/tmp/serial0,server,nowait (qemu) device_add virtserialport,bus=virtio-serial0.0,nr=2,\ chardev=serial0,id=serial0,name=serial0 (qemu) device_del serial0 (qemu) device_add virtserialport,bus=virtio-serial0.0,nr=2,\ chardev=serial0,id=serial0,name=serial0 kernel error: virtio-ports vport2p2: Error allocating inbufs qemu error: virtio-serial-bus: Guest failure in adding port 2 for device \ virtio-serial0.0 This happens because buffers for the in_vq are allocated when the port is added but are not released when the port is unplugged. They are only released when virtconsole is removed (see a7a69ec0) To avoid the problem and to be symmetric, we could allocate all the buffers in init_vqs() as they are released in remove_vqs(), but it sounds like a waste of memory. Rather than that, this patch changes add_port() logic to ignore ENOSPC error in fill_queue(), which means queue has already been filled. Fixes: a7a69ec0 ("virtio_console: free buffers after reset") Cc: mst@redhat.com Cc: stable@vger.kernel.org Signed-off-by:
Laurent Vivier <lvivier@redhat.com> Signed-off-by:
-
Michael S. Tsirkin authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 2855b335 ] an allocated buffer doesn't need to be tied to a vq - only vq->vdev is ever used. Pass the function the just what it needs - the vdev. Cc: stable@vger.kernel.org Signed-off-by:
-
Michael S. Tsirkin authored
BugLink: https://bugs.launchpad.net/bugs/1854855 [ Upstream commit 5c60300d ] When out of memory and we can't add ctrl vq buffers, probe fails. Unfortunately the error handling is out of spec: it calls del_vqs without bothering to reset the device first. To fix, call the full cleanup function in this case. Cc: stable@vger.kernel.org Signed-off-by:
-
Sean Young authored
BugLink: https://bugs.launchpad.net/bugs/1854855 commit f3f5ba42 upstream. The touch timer is set up in intf1. If the second interface does not exist, the timer and touch input device are not setup and we get the following error, when touch events are reported via intf0. kernel BUG at kernel/time/timer.c:956! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc1+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__mod_timer kernel/time/timer.c:956 [inline] RIP: 0010:__mod_timer kernel/time/timer.c:949 [inline] RIP: 0010:mod_timer+0x5a2/0xb50 kernel/time/timer.c:1100 Code: 45 10 c7 44 24 14 ff ff ff ff 48 89 44 24 08 48 8d 45 20 48 c7 44 24 18 00 00 00 00 48 89 04 24 e9 5a fc ff ff e8 ae ce 0e 00 <0f> 0b e8 a7 ce 0e 00 4c 89 74 24 20 e9 37 fe ff ff e8 98 ce 0e 00 RSP: 0018:ffff8881db209930 EFLAGS: 00010006 RAX: ffffffff86c2b200 RBX: 00000000ffffa688 RCX: ffffffff83efc583 RDX: 0000000000000100 RSI: ffffffff812f4d82 RDI: ffff8881d2356200 RBP: ffff8881d23561e8 R08: ffffffff86c2b200 R09: ffffed103a46abeb R10: ffffed103a46abea R11: ffff8881d2355f53 R12: dffffc0000000000 R13: 1ffff1103b64132d R14: ffff8881d2355f50 R15: 0000000000000006 FS: 0000000000000000(0000) GS:ffff8881db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f75e2799000 CR3: 00000001d3b07000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> imon_touch_event drivers/media/rc/imon.c:1348 [inline] imon_incoming_packet.isra.0+0x2546/0x2f10 drivers/media/rc/imon.c:1603 usb_rx_callback_intf0+0x151/0x1e0 drivers/media/rc/imon.c:1734 __usb_hcd_giveback_urb+0x1f2/0x470 drivers/usb/core/hcd.c:1654 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1719 dummy_timer+0x120f/0x2fa2 drivers/usb/gadget/udc/dummy_hcd.c:1965 call_timer_fn+0x179/0x650 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5e3/0x1490 kernel/time/timer.c:1786 __do_softirq+0x221/0x912 kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x178/0x1a0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x12f/0x500 arch/x86/kernel/apic/apic.c:1137 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 </IRQ> RIP: 0010:default_idle+0x28/0x2e0 arch/x86/kernel/process.c:581 Code: 90 90 41 56 41 55 65 44 8b 2d 44 3a 8f 7a 41 54 55 53 0f 1f 44 00 00 e8 36 ee d0 fb e9 07 00 00 00 0f 00 2d fa dd 4f 00 fb f4 <65> 44 8b 2d 20 3a 8f 7a 0f 1f 44 00 00 5b 5d 41 5c 41 5d 41 5e c3 RSP: 0018:ffffffff86c07da8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000007 RBX: ffffffff86c2b200 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffffff86c2ba4c RBP: fffffbfff0d85640 R08: ffffffff86c2b200 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x3b6/0x500 kernel/sched/idle.c:263 cpu_startup_entry+0x14/0x20 kernel/sched/idle.c:355 start_kernel+0x82a/0x864 init/main.c:784 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 Modules linked in: Reported-by: syzbot+f49d12d34f2321cf4df2@syzkaller.appspotmail.com Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Vito Caputo authored
BugLink: https://bugs.launchpad.net/bugs/1854855 commit ca8f245f upstream. Don't use uninitialized ircode[] in cxusb_rc_query() when cxusb_ctrl_msg() fails to populate its contents. syzbot reported: dvb-usb: bulk message failed: -22 (1/-30591) ===================================================== BUG: KMSAN: uninit-value in ir_lookup_by_scancode drivers/media/rc/rc-main.c:494 [inline] BUG: KMSAN: uninit-value in rc_g_keycode_from_table drivers/media/rc/rc-main.c:582 [inline] BUG: KMSAN: uninit-value in rc_keydown+0x1a6/0x6f0 drivers/media/rc/rc-main.c:816 CPU: 1 PID: 11436 Comm: kworker/1:2 Not tainted 5.3.0-rc7+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events dvb_usb_read_remote_control Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x191/0x1f0 lib/dump_stack.c:113 kmsan_report+0x13a/0x2b0 mm/kmsan/kmsan_report.c:108 __msan_warning+0x73/0xe0 mm/kmsan/kmsan_instr.c:250 bsearch+0x1dd/0x250 lib/bsearch.c:41 ir_lookup_by_scancode drivers/media/rc/rc-main.c:494 [inline] rc_g_keycode_from_table drivers/media/rc/rc-main.c:582 [inline] rc_keydown+0x1a6/0x6f0 drivers/media/rc/rc-main.c:816 cxusb_rc_query+0x2e1/0x360 drivers/media/usb/dvb-usb/cxusb.c:548 dvb_usb_read_remote_control+0xf9/0x290 drivers/media/usb/dvb-usb/dvb-usb-remote.c:261 process_one_work+0x1572/0x1ef0 kernel/workqueue.c:2269 worker_thread+0x111b/0x2460 kernel/workqueue.c:2415 kthread+0x4b5/0x4f0 kernel/kthread.c:256 ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:355 Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:150 [inline] kmsan_internal_chain_origin+0xd2/0x170 mm/kmsan/kmsan.c:314 __msan_chain_origin+0x6b/0xe0 mm/kmsan/kmsan_instr.c:184 rc_g_keycode_from_table drivers/media/rc/rc-main.c:583 [inline] rc_keydown+0x2c4/0x6f0 drivers/media/rc/rc-main.c:816 cxusb_rc_query+0x2e1/0x360 drivers/media/usb/dvb-usb/cxusb.c:548 dvb_usb_read_remote_control+0xf9/0x290 drivers/media/usb/dvb-usb/dvb-usb-remote.c:261 process_one_work+0x1572/0x1ef0 kernel/workqueue.c:2269 worker_thread+0x111b/0x2460 kernel/workqueue.c:2415 kthread+0x4b5/0x4f0 kernel/kthread.c:256 ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:355 Local variable description: ----ircode@cxusb_rc_query Variable was created at: cxusb_rc_query+0x4d/0x360 drivers/media/usb/dvb-usb/cxusb.c:543 dvb_usb_read_remote_control+0xf9/0x290 drivers/media/usb/dvb-usb/dvb-usb-remote.c:261 Signed-off-by:
Vito Caputo <vcaputo@pengaru.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Oliver Neukum authored
BugLink: https://bugs.launchpad.net/bugs/1854855 commit 1b976fc6 upstream. The driver needs an isochronous endpoint to be present. It will oops in its absence. Add checking for it. Reported-by: syzbot+d93dff37e6a89431c158@syzkaller.appspotmail.com Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by:
-
Kai Shen authored
BugLink: https://bugs.launchpad.net/bugs/1854855 commit e6e8df07 upstream. Add NULL checks to show() and store() in cpufreq.c to avoid attempts to invoke a NULL callback. Though some interfaces of cpufreq are set as read-only, users can still get write permission using chmod which can lead to a kernel crash, as follows: chmod +w /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq This bug was found in linux 4.19. Signed-off-by:
Kai Shen <shenkai8@huawei.com> Reported-by:
Feilong Lin <linfeilong@huawei.com> Reviewed-by:
Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Subject & changelog ] Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Alexander Popov authored
BugLink: https://bugs.launchpad.net/bugs/1854855 commit 6dcd5d7a upstream. There is the same incorrect approach to locking implemented in vivid_stop_generating_vid_cap(), vivid_stop_generating_vid_out() and sdr_cap_stop_streaming(). These functions are called during streaming stopping with vivid_dev.mutex locked. And they all do the same mistake while stopping their kthreads, which need to lock this mutex as well. See the example from vivid_stop_generating_vid_cap(): /* shutdown control thread */ vivid_grab_controls(dev, false); mutex_unlock(&dev->mutex); kthread_stop(dev->kthread_vid_cap); dev->kthread_vid_cap = NULL; mutex_lock(&dev->mutex); But when this mutex is unlocked, another vb2_fop_read() can lock it instead of vivid_thread_vid_cap() and manipulate the buffer queue. That causes a use-after-free access later. To fix those issues let's: 1. avoid unlocking the mutex in vivid_stop_generating_vid_cap(), vivid_stop_generating_vid_out() and sdr_cap_stop_streaming(); 2. use mutex_trylock() with schedule_timeout_uninterruptible() in the loops of the vivid kthread handlers. Signed-off-by:
Alexander Popov <alex.popov@linux.com> Acked-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Vandana BN authored
BugLink: https://bugs.launchpad.net/bugs/1854855 commit b4add02d upstream. When vbi stream is started, followed by video streaming, the vid_cap_streaming and vid_out_streaming were not being set to true, which would cause the video stream to stop when vbi stream is stopped. This patch allows to set vid_cap_streaming and vid_out_streaming to true. According to Hans Verkuil it appears that these 'if (dev->kthread_vid_cap)' checks are a left-over from the original vivid development and should never have been there. Signed-off-by:
Vandana BN <bnvandana@gmail.com> Cc: <stable@vger.kernel.org> # for v3.18 and up Signed-off-by:
-
Waiman Long authored
BugLink: https://bugs.launchpad.net/bugs/1854855 commit cd5a2aa8 upstream. Since MDS and TAA mitigations are inter-related for processors that are affected by both vulnerabilities, the followiing confusing messages can be printed in the kernel log: MDS: Vulnerable MDS: Mitigation: Clear CPU buffers To avoid the first incorrect message, defer the printing of MDS mitigation after the TAA mitigation selection has been done. However, that has the side effect of printing TAA mitigation first before MDS mitigation. [ bp: Check box is affected/mitigations are disabled first before printing and massage. ] Suggested-by:
Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by:
Waiman Long <longman@redhat.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Mark Gross <mgross@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20191115161445.30809-3-longman@redhat.comSigned-off-by:
-
Waiman Long authored
BugLink: https://bugs.launchpad.net/bugs/1854855 commit 64870ed1 upstream. For MDS vulnerable processors with TSX support, enabling either MDS or TAA mitigations will enable the use of VERW to flush internal processor buffers at the right code path. IOW, they are either both mitigated or both not. However, if the command line options are inconsistent, the vulnerabilites sysfs files may not report the mitigation status correctly. For example, with only the "mds=off" option: vulnerabilities/mds:Vulnerable; SMT vulnerable vulnerabilities/tsx_async_abort:Mitigation: Clear CPU buffers; SMT vulnerable The mds vulnerabilities file has wrong status in this case. Similarly, the taa vulnerability file will be wrong with mds mitigation on, but taa off. Change taa_select_mitigation() to sync up the two mitigation status and have them turned off if both "mds=off" and "tsx_async_abort=off" are present. Update documentation to emphasize the fact that both "mds=off" and "tsx_async_abort=off" have to be specified together for processors that are affected by both TAA and MDS to be effective. [ bp: Massage and add kernel-parameters.txt change too. ] Fixes: 1b42f017 ("x86/speculation/taa: Add mitigation for TSX Async Abort") Signed-off-by:
-
Alexander Kapshuk authored
BugLink: https://bugs.launchpad.net/bugs/1854855 commit 700c1018 upstream. gawk 5.0.1 generates the following regexp warnings: GEN /home/sasha/torvalds/tools/objtool/arch/x86/lib/inat-tables.c awk: ../arch/x86/tools/gen-insn-attr-x86.awk:260: warning: regexp escape sequence `\:' is not a known regexp operator awk: ../arch/x86/tools/gen-insn-attr-x86.awk:350: (FILENAME=../arch/x86/lib/x86-opcode-map.txt FNR=41) warning: regexp escape sequence `\&' is not a known regexp operator Ealier versions of gawk are not known to generate these warnings. The gawk manual referenced below does not list characters ':' and '&' as needing escaping, so 'unescape' them. See https://www.gnu.org/software/gawk/manual/html_node/Escape-Sequences.html for more info. Running diff on the output generated by the script before and after applying the patch reported no differences. [ bp: Massage commit message. ] [ Caught the respective tools header discrepancy. ] Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Alexander Kapshuk <alexander.kapshuk@gmail.com> Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190924044659.3785-1-alexander.kapshuk@gmail.comSigned-off-by:
-
Alexey Brodkin authored
BugLink: https://bugs.launchpad.net/bugs/1854855 commit 5effc09c upstream. 8-letter strings representing ARC perf events are stores in two 32-bit registers as ASCII characters like that: "IJMP", "IALL", "IJMPTAK" etc. And the same order of bytes in the word is used regardless CPU endianness. Which means in case of big-endian CPU core we need to swap bytes to get the same order as if it was on little-endian CPU. Otherwise we're seeing the following error message on boot: ------------------------->8---------------------- ARC perf : 8 counters (32 bits), 40 conditions, [overflow IRQ support] sysfs: cannot create duplicate filename '/devices/arc_pct/events/pmji' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.18 #3 Stack Trace: arc_unwind_core+0xd4/0xfc dump_stack+0x64/0x80 sysfs_warn_dup+0x46/0x58 sysfs_add_file_mode_ns+0xb2/0x168 create_files+0x70/0x2a0 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at kernel/events/core.c:12144 perf_event_sysfs_init+0x70/0xa0 Failed to register pmu: arc_pct, reason -17 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.18 #3 Stack Trace: arc_unwind_core+0xd4/0xfc dump_stack+0x64/0x80 __warn+0x9c/0xd4 warn_slowpath_fmt+0x22/0x2c perf_event_sysfs_init+0x70/0xa0 ---[ end trace a75fb9a9837bd1ec ]--- ------------------------->8---------------------- What happens here we're trying to register more than one raw perf event with the same name "PMJI". Why? Because ARC perf events are 4 to 8 letters and encoded into two 32-bit words. In this particular case we deal with 2 events: * "IJMP____" which counts all jump & branch instructions * "IJMPC___" which counts only conditional jumps & branches Those strings are split in two 32-bit words this way "IJMP" + "____" & "IJMP" + "C___" correspondingly. Now if we read them swapped due to CPU core being big-endian then we read "PMJI" + "____" & "PMJI" + "___C". And since we interpret read array of ASCII letters as a null-terminated string on big-endian CPU we end up with 2 events of the same name "PMJI". Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: stable@vger.kernel.org Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Adrian Hunter authored
BugLink: https://bugs.launchpad.net/bugs/1854855 commit d806b46e upstream. Apparently a cut-and-paste error, 'do_data_tag' is using 'brq' for data size even though 'brq' has not been set up. Instead use blk_rq_sectors(). Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Reviewed-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Gang He authored
BugLink: https://bugs.launchpad.net/bugs/1854855 commit a6346447 upstream. Remove ocfs2_is_o2cb_active(). We have similar functions to identify which cluster stack is being used via osb->osb_cluster_stack. Secondly, the current implementation of ocfs2_is_o2cb_active() is not totally safe. Based on the design of stackglue, we need to get ocfs2_stack_lock before using ocfs2_stack related data structures, and that active_stack pointer can be NULL in the case of mount failure. Link: http://lkml.kernel.org/r/1495441079-11708-1-git-send-email-ghe@suse.comSigned-off-by:
Gang He <ghe@suse.com> Reviewed-by:
Joseph Qi <jiangqi903@gmail.com> Reviewed-by:
Eric Ren <zren@suse.com> Acked-by:
Changwei Ge <ge.changwei@h3c.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
