- 21 Sep, 2022 39 commits
-
-
Pavel Begunkov authored
We have normal sends, but what is missing is sendto-like requests. Add sendto() capabilities to IORING_OP_SEND by passing in addr just as we do for IORING_OP_SEND_ZC. Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/69fbd8b2cb830e57d1bf9ec351e9bf95c5b77e3f.1663668091.git.asml.silence@gmail.comSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
Instead of passing the right address into io_setup_async_addr() only specify local on-stack storage and let the function infer where to grab it from. It optimises out one local variable we have to deal with. Signed-off-by:
-
Pavel Begunkov authored
Partial zc send may end up in io_req_complete_failed(), which not only would return invalid result but also mask out the notification leading to lifetime issues. Cc: stable@vger.kernel.org Signed-off-by:
-
Pavel Begunkov authored
Just as with rw, partial send/recv may end up in io_req_complete_failed() and loose the result, make sure we return the number of bytes processed. Cc: stable@vger.kernel.org Signed-off-by:
-
Pavel Begunkov authored
A partially done read/write may end up in io_req_complete_failed() and loose the result, make sure we return the number of bytes processed. Cc: stable@vger.kernel.org Signed-off-by:
-
Pavel Begunkov authored
Sometimes we have to do a little bit of a fixup on a request failuer in io_req_complete_failed(). Add a callback in opdef for that. Cc: stable@vger.kernel.org Signed-off-by:
-
Jens Axboe authored
If we have doubly sized SQEs, then we need to shift the sq index by 1 to account for using two entries for a single request. The CQE dumping gets this right, but the SQE one does not. Improve the SQE dumping in general, the information dumped is pretty sparse and doesn't even cover the whole basic part of the SQE. Include information on the extended part of the SQE, if doubly sized SQEs are in use. A typical dump now looks like the following: [...] SQEs: 32 32: opcode:URING_CMD, fd:0, flags:1, off:3225964160, addr:0x0, rw_flags:0x0, buf_index:0 user_data:2721, e0:0x0, e1:0xffffb8041000, e2:0x100000000000, e3:0x5500, e4:0x7, e5:0x0, e6:0x0, e7:0x0 33: opcode:URING_CMD, fd:0, flags:1, off:3225964160, addr:0x0, rw_flags:0x0, buf_index:0 user_data:2722, e0:0x0, e1:0xffffb8043000, e2:0x100000000000, e3:0x5508, e4:0x7, e5:0x0, e6:0x0, e7:0x0 34: opcode:URING_CMD, fd:0, flags:1, off:3225964160, addr:0x0, rw_flags:0x0, buf_index:0 user_data:2723, e0:0x0, e1:0xffffb8045000, e2:0x100000000000, e3:0x5510, e4:0x7, e5:0x0, e6:0x0, e7:0x0 [...] Fixes: ebdeb7c0 ("io_uring: add support for 128-byte SQEs") Signed-off-by:
-
Jens Axboe authored
We already have the cq_shift, just use that to tell if we have doubly sized CQEs or not. While in there, cleanup the CQE32 vs normal CQE size printing. Signed-off-by: -
Pavel Begunkov authored
We removed conditional io_commit_cqring_flush() guarding against spurious eventfd and the io_disarm_next()'s return value is not used anymore, just void it. Signed-off-by:
-
Pavel Begunkov authored
We'll grab uring_lock and call __io_run_local_work() with several atomics inside even if there are no task works. Skip it if ->work_llist is empty. Signed-off-by:
Dylan Yudaken <dylany@fb.com> Link: https://lore.kernel.org/r/f6a885f372bad2d77d9cd87341b0a86a4000c0ff.1662652536.git.asml.silence@gmail.comSigned-off-by:
-
Pavel Begunkov authored
Let's keep checks for whether to break the iopoll loop or not same for normal and defer tw, this includes ->cached_cq_tail checks guarding against polling more than asked for. Signed-off-by:
-
Pavel Begunkov authored
We may propagate a positive return value of io_run_task_work() out of io_iopoll_check(), which breaks our tests. io_run_task_work() doesn't return anything useful for us, ignore the return value. Fixes: c0e0d6ba ("io_uring: add IORING_SETUP_DEFER_TASKRUN") Signed-off-by:
-
Pavel Begunkov authored
We try to restrict CQ waiters when IORING_SETUP_DEFER_TASKRUN is set, but if nothing has been submitted yet it'll allow any waiter, which violates the contract. Fixes: c0e0d6ba ("io_uring: add IORING_SETUP_DEFER_TASKRUN") Signed-off-by:
-
Pavel Begunkov authored
In case of DEFER_TASK_WORK we try to restrict waiters to only one task, which is also the only submitter; however, we don't do it reliably, which might be very confusing and backfire in the future. E.g. we currently allow multiple tasks in io_iopoll_check(). Fixes: c0e0d6ba ("io_uring: add IORING_SETUP_DEFER_TASKRUN") Signed-off-by:
-
Pavel Begunkov authored
Reuse struct io_sr_msg for zerocopy sends, which is handy. There is only one zerocopy specific field, namely .notif, and we have enough space for it. Signed-off-by:
-
Pavel Begunkov authored
In preparation for using struct io_sr_msg for zerocopy sends, clean up types. First, flags can be u16 as it's provided by the userspace in u16 ioprio, as well as addr_len. This saves us 4 bytes. Also use unsigned for size and done_io, both are as well limited to u32. Signed-off-by:
-
Pavel Begunkov authored
Add a sg_from_iter() for when we initiate non-bvec zerocopy sends, which helps us to remove some extra steps from io_sg_from_iter(). The only thing the new function has to do before giving control away to __zerocopy_sg_from_iter() is to check if the skb has managed frags and downgrade them if so. Signed-off-by:
-
Pavel Begunkov authored
We already keep io_async_msghdr caches for normal send/recv requests, use them also for zerocopy send. Signed-off-by:
-
Pavel Begunkov authored
send/recv have async_data caches but there are only used from within issue handlers. Extend their use also to ->prep_async, should be handy with links and IOSQE_ASYNC. Signed-off-by:
-
Pavel Begunkov authored
We should prioritise send/recv retry cases over failures, they're more important. Shuffle -ERESTARTSYS after we handled retries. Signed-off-by:
-
Pavel Begunkov authored
There is one place when we forgot to change hand coded spin locking with io_cq_lock(), change it to be more consistent. Note, the unlock part is already __io_cq_unlock_post(). Signed-off-by:
-
Pavel Begunkov authored
Request referencing has changed a while ago and there is no notion left of submission/completion references, kill an outdated comment. Signed-off-by:
-
Dylan Yudaken authored
In commit 934447a6 ("io_uring: do not recycle buffer in READV") a temporary fix was put in io_kbuf_recycle to simply never recycle READV buffers. Instead of that, rather treat READV with REQ_F_BUFFER_SELECTED the same as a READ with REQ_F_BUFFER_SELECTED. Since READV requires iov_len of 1 they are essentially the same. In order to do this inside io_prep_rw() add some validation to check that it is in fact only length 1, and also extract the length of the buffer at prep time. This allows removal of the io_iov_buffer_select codepaths as they are only used from the READV op. Signed-off-by:
-
Jens Axboe authored
We need the poll_flags to know how to poll for the IO, and we should have the batch structure in preparation for supporting batched completions with iopoll. Signed-off-by: -
Jens Axboe authored
Combine the two checks we have for task_work running and whether or not we need to shuffle the mutex into one, so we unify how task_work is run in the iopoll loop. This helps ensure that local task_work is run when needed, and also optimizes that path to avoid a mutex shuffle if it's not needed. Signed-off-by: -
Jens Axboe authored
We have a few spots that drop the mutex just to run local task_work, which immediately tries to grab it again. Add a helper that just passes in whether we're locked already. Signed-off-by: -
Jens Axboe authored
After the addition of iopoll support for passthrough, there's a bit of a mixup here. Clean it up and get rid of the casting for the passthrough command type. Signed-off-by: -
Kanchan Joshi authored
Store a cookie during submission, and use that to implement completion-polling inside the ->uring_cmd_iopoll handler. This handler makes use of existing bio poll facility. Signed-off-by:
Kanchan Joshi <joshi.k@samsung.com> Signed-off-by:
Anuj Gupta <anuj20.g@samsung.com> Link: https://lore.kernel.org/r/20220823161443.49436-5-joshi.k@samsung.comSigned-off-by:
-
Kanchan Joshi authored
This is in preparation to support iopoll for nvme passthrough. Signed-off-by:
-
Kanchan Joshi authored
Put this up in the same way as iopoll is done for regular read/write IO. Make place for storing a cookie into struct io_uring_cmd on submission. Perform the completion using the ->uring_cmd_iopoll handler. Signed-off-by:
Pankaj Raghav <p.raghav@samsung.com> Link: https://lore.kernel.org/r/20220823161443.49436-3-joshi.k@samsung.comSigned-off-by:
-
Kanchan Joshi authored
io_uring will invoke this to do completion polling on uring-cmd operations. Signed-off-by:
-
Dylan Yudaken authored
Add tracing for io_run_local_task_work Signed-off-by:
-
Dylan Yudaken authored
Some workloads rely on a registered eventfd (via io_uring_register_eventfd(3)) in order to wake up and process the io_uring. In the case of a ring setup with IORING_SETUP_DEFER_TASKRUN, that eventfd also needs to be signalled when there are tasks to run. This changes an old behaviour which assumed 1 eventfd signal implied at least 1 CQE, however only when this new flag is set (and so old users will not notice). This should be expected with the IORING_SETUP_DEFER_TASKRUN flag as it is not guaranteed that every task will result in a CQE. Signed-off-by:
-
Dylan Yudaken authored
Non functional change: move this function above io_eventfd_signal so it can be used from there Signed-off-by:
-
Dylan Yudaken authored
Allow deferring async tasks until the user calls io_uring_enter(2) with the IORING_ENTER_GETEVENTS flag. Enable this mode with a flag at io_uring_setup time. This functionality requires that the later io_uring_enter will be called from the same submission task, and therefore restrict this flag to work only when IORING_SETUP_SINGLE_ISSUER is also set. Being able to hand pick when tasks are run prevents the problem where there is current work to be done, however task work runs anyway. For example, a common workload would obtain a batch of CQEs, and process each one. Interrupting this to additional taskwork would add latency but not gain anything. If instead task work is deferred to just before more CQEs are obtained then no additional latency is added. The way this is implemented is by trying to keep task work local to a io_ring_ctx, rather than to the submission task. This is required, as the application will want to wake up only a single io_ring_ctx at a time to process work, and so the lists of work have to be kept separate. This has some other benefits like not having to check the task continually in handle_tw_list (and potentially unlocking/locking those), and reducing locks in the submit & process completions path. There are networking cases where using this option can reduce request latency by 50%. For example a contrived example using [1] where the client sends 2k data and receives the same data back while doing some system calls (to trigger task work) shows this reduction. The reason ends up being that if sending responses is delayed by processing task work, then the client side sits idle. Whereas reordering the sends first means that the client runs it's workload in parallel with the local task work. [1]: Using https://github.com/DylanZA/netbench/tree/defer_run Client: ./netbench --client_only 1 --control_port 10000 --host <host> --tx "epoll --threads 16 --per_thread 1 --size 2048 --resp 2048 --workload 1000" Server: ./netbench --server_only 1 --control_port 10000 --rx "io_uring --defer_taskrun 0 --workload 100" --rx "io_uring --defer_taskrun 1 --workload 100" Signed-off-by:
-
Dylan Yudaken authored
This is not needed, and it is normally better to wait for task work until after submissions. This will allow greater batching if either work arrives in the meanwhile, or if the submissions cause task work to be queued up. For SQPOLL this also no longer runs task work, but this is handled inside the SQPOLL loop anyway. For IOPOLL io_iopoll_check will run task work anyway And otherwise io_cqring_wait will run task work Suggested-by:
-
Dylan Yudaken authored
This will be used later to know if the ring has outstanding work. Right now just if there is overflow CQEs to copy to the main CQE ring, but later will include deferred tasks Signed-off-by:
-
Dylan Yudaken authored
'running' is set once and read once, so can easily just remove it Signed-off-by:
-
Dylan Yudaken authored
Guard wakeups that the user can trigger, and that may end up triggering a call back into eventfd_signal. This is in addition to the current approach that only guards in eventfd_signal. Rename in_eventfd_signal -> in_eventfd at the same time to reflect this. Without this there would be a deadlock in the following code using libaio: int main() { struct io_context *ctx = NULL; struct iocb iocb; struct iocb *iocbs[] = { &iocb }; int evfd; uint64_t val = 1; evfd = eventfd(0, EFD_CLOEXEC); assert(!io_setup(2, &ctx)); io_prep_poll(&iocb, evfd, POLLIN); io_set_eventfd(&iocb, evfd); assert(1 == io_submit(ctx, 1, iocbs)); write(evfd, &val, 8); } Signed-off-by:
-
- 18 Sep, 2022 1 commit
-
-
Linus Torvalds authored
-
