- 09 Feb, 2016 1 commit
-
-
Lars-Peter Clausen authored
commit d590faf9 upstream. The SPI tx and rx buffers are both supposed to be scan_bytes amount of bytes large and a common allocation is used to allocate both buffers. This puts the beginning of the tx buffer scan_bytes bytes after the rx buffer. The initialization of the tx buffer pointer is done adding scan_bytes to the beginning of the rx buffer, but since the rx buffer is of type __be16 this will actually add two times as much and the tx buffer ends up pointing after the allocated buffer. Fix this by using scan_count, which is scan_bytes / 2, instead of scan_bytes when initializing the tx buffer pointer. Fixes: aacff892 ("staging:iio:adis: Preallocate transfer message") Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
- 08 Feb, 2016 1 commit
-
-
David Vrabel authored
commit 98dd166e upstream. With commit 633d6f17 (x86/xen: prepare p2m list for memory hotplug) the P2M may be sized to accomdate a much larger amount of memory than the domain currently has. When saving a domain, the toolstack must scan all the P2M looking for populated pages. This results in a performance regression due to the unnecessary scanning. Instead of reporting (via shared_info) the maximum possible size of the P2M, hint at the last PFN which might be populated. This hint is increased as new leaves are added to the P2M (in the expectation that they will be used for populated entries). Signed-off-by:
David Vrabel <david.vrabel@citrix.com> [ tim.gardner: backport to 4.2-stable ] Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
-
- 02 Feb, 2016 1 commit
-
-
Kamal Mostafa authored
Signed-off-by:
-
- 29 Jan, 2016 37 commits
-
-
Dan Streetman authored
[ Upstream commit a8a572a6 ] Remove the dst_entries_init/destroy calls for xfrm4 and xfrm6 dst_ops templates; their dst_entries counters will never be used. Move the xfrm dst_ops initialization from the common xfrm/xfrm_policy.c to xfrm4/xfrm4_policy.c and xfrm6/xfrm6_policy.c, and call dst_entries_init and dst_entries_destroy for each net namespace. The ipv4 and ipv6 xfrms each create dst_ops template, and perform dst_entries_init on the templates. The template values are copied to each net namespace's xfrm.xfrm*_dst_ops. The problem there is the dst_ops pcpuc_entries field is a percpu counter and cannot be used correctly by simply copying it to another object. The result of this is a very subtle bug; changes to the dst entries counter from one net namespace may sometimes get applied to a different net namespace dst entries counter. This is because of how the percpu counter works; it has a main count field as well as a pointer to the percpu variables. Each net namespace maintains its own main count variable, but all point to one set of percpu variables. When any net namespace happens to change one of the percpu variables to outside its small batch range, its count is moved to the net namespace's main count variable. So with multiple net namespaces operating concurrently, the dst_ops entries counter can stray from the actual value that it should be; if counts are consistently moved from one net namespace to another (which my testing showed is likely), then one net namespace winds up with a negative dst_ops count while another winds up with a continually increasing count, eventually reaching its gc_thresh limit, which causes all new traffic on the net namespace to fail with -ENOBUFS. Signed-off-by:
Dan Streetman <dan.streetman@canonical.com> Signed-off-by:
Dan Streetman <ddstreet@ieee.org> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Joe Jin authored
[ Upstream commit ca88ea12 ] Sometimes xennet_create_queues() may failed to created all requested queues, we need to update num_queues to real created to avoid NULL pointer dereference. Signed-off-by:
Joe Jin <joe.jin@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David S. Miller <davem@davemloft.net> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Wei Liu authored
[ Upstream commit 32a84405 ] Originally that parameter was always reset to num_online_cpus during module initialisation, which renders it useless. The fix is to only set max_queues to num_online_cpus when user has not provided a value. Signed-off-by:
Wei Liu <wei.liu2@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Reviewed-by:
-
Wei Liu authored
[ Upstream commit 4c82ac3c ] Originally that parameter was always reset to num_online_cpus during module initialisation, which renders it useless. The fix is to only set max_queues to num_online_cpus when user has not provided a value. Reported-by:
Johnny Strom <johnny.strom@linuxsolutions.fi> Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
-
Karl Heiss authored
[ Upstream commit 635682a1 ] A case can occur when sctp_accept() is called by the user during a heartbeat timeout event after the 4-way handshake. Since sctp_assoc_migrate() changes both assoc->base.sk and assoc->ep, the bh_sock_lock in sctp_generate_heartbeat_event() will be taken with the listening socket but released with the new association socket. The result is a deadlock on any future attempts to take the listening socket lock. Note that this race can occur with other SCTP timeouts that take the bh_lock_sock() in the event sctp_accept() is called. BUG: soft lockup - CPU#9 stuck for 67s! [swapper:0] ... RIP: 0010:[<ffffffff8152d48e>] [<ffffffff8152d48e>] _spin_lock+0x1e/0x30 RSP: 0018:ffff880028323b20 EFLAGS: 00000206 RAX: 0000000000000002 RBX: ffff880028323b20 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff880028323be0 RDI: ffff8804632c4b48 RBP: ffffffff8100bb93 R08: 0000000000000000 R09: 0000000000000000 R10: ffff880610662280 R11: 0000000000000100 R12: ffff880028323aa0 R13: ffff8804383c3880 R14: ffff880028323a90 R15: ffffffff81534225 FS: 0000000000000000(0000) GS:ffff880028320000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00000000006df528 CR3: 0000000001a85000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffff880616b70000, task ffff880616b6cab0) Stack: ffff880028323c40 ffffffffa01c2582 ffff880614cfb020 0000000000000000 <d> 0100000000000000 00000014383a6c44 ffff8804383c3880 ffff880614e93c00 <d> ffff880614e93c00 0000000000000000 ffff8804632c4b00 ffff8804383c38b8 Call Trace: <IRQ> [<ffffffffa01c2582>] ? sctp_rcv+0x492/0xa10 [sctp] [<ffffffff8148c559>] ? nf_iterate+0x69/0xb0 [<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0 [<ffffffff8148c716>] ? nf_hook_slow+0x76/0x120 [<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0 [<ffffffff8149757d>] ? ip_local_deliver_finish+0xdd/0x2d0 [<ffffffff81497808>] ? ip_local_deliver+0x98/0xa0 [<ffffffff81496ccd>] ? ip_rcv_finish+0x12d/0x440 [<ffffffff81497255>] ? ip_rcv+0x275/0x350 [<ffffffff8145cfeb>] ? __netif_receive_skb+0x4ab/0x750 ... With lockdep debugging: ===================================== [ BUG: bad unlock balance detected! ] ------------------------------------- CslRx/12087 is trying to release lock (slock-AF_INET) at: [<ffffffffa01bcae0>] sctp_generate_timeout_event+0x40/0xe0 [sctp] but there are no more locks to release! other info that might help us debug this: 2 locks held by CslRx/12087: #0: (&asoc->timers[i]){+.-...}, at: [<ffffffff8108ce1f>] run_timer_softirq+0x16f/0x3e0 #1: (slock-AF_INET){+.-...}, at: [<ffffffffa01bcac3>] sctp_generate_timeout_event+0x23/0xe0 [sctp] Ensure the socket taken is also the same one that is released by saving a copy of the socket before entering the timeout event critical section. Signed-off-by:
Karl Heiss <kheiss@gmail.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 60a6531b ] We can't be within an RCU read-side critical section when deleting VLANs, as underlying drivers might sleep during the hardware operation. Therefore, replace the RCU critical section with a mutex. This is consistent with team_vlan_rx_add_vid. Fixes: 3d249d4c ("net: introduce ethernet teaming device") Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 42eff6a6 ] It is not allowed to free the memory of an object which is part of a list which is protected by rcu-read-side-critical sections without making sure that no other context is accessing the object anymore. This usually happens by removing the references to this object and then waiting until the rcu grace period is over and no one (allowedly) accesses it anymore. But the _now functions ignore this completely. They free the object directly even when a different context still tries to access it. This has to be avoided and thus these functions must be removed and all functions have to use batadv_orig_node_free_ref. Fixes: 72822225 ("batman-adv: Fix rcu_barrier() miss due to double call_rcu() in TT code") Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc> Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit b4d922cf ] It is not allowed to free the memory of an object which is part of a list which is protected by rcu-read-side-critical sections without making sure that no other context is accessing the object anymore. This usually happens by removing the references to this object and then waiting until the rcu grace period is over and no one (allowedly) accesses it anymore. But the _now functions ignore this completely. They free the object directly even when a different context still tries to access it. This has to be avoided and thus these functions must be removed and all functions have to use batadv_hardif_free_ref. Fixes: 89652331 ("batman-adv: split tq information in neigh_node struct") Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit ae3e1e36 ] It is not allowed to free the memory of an object which is part of a list which is protected by rcu-read-side-critical sections without making sure that no other context is accessing the object anymore. This usually happens by removing the references to this object and then waiting until the rcu grace period is over and no one (allowedly) accesses it anymore. But the _now functions ignore this completely. They free the object directly even when a different context still tries to access it. This has to be avoided and thus these functions must be removed and all functions have to use batadv_neigh_ifinfo_free_ref. Fixes: 89652331 ("batman-adv: split tq information in neigh_node struct") Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 2baa753c ] It is not allowed to free the memory of an object which is part of a list which is protected by rcu-read-side-critical sections without making sure that no other context is accessing the object anymore. This usually happens by removing the references to this object and then waiting until the rcu grace period is over and no one (allowedly) accesses it anymore. But the _now functions ignore this completely. They free the object directly even when a different context still tries to access it. This has to be avoided and thus these functions must be removed and all functions have to use batadv_neigh_node_free_ref. Fixes: 89652331 ("batman-adv: split tq information in neigh_node struct") Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit deed9660 ] It is not allowed to free the memory of an object which is part of a list which is protected by rcu-read-side-critical sections without making sure that no other context is accessing the object anymore. This usually happens by removing the references to this object and then waiting until the rcu grace period is over and no one (allowedly) accesses it anymore. But the _now functions ignore this completely. They free the object directly even when a different context still tries to access it. This has to be avoided and thus these functions must be removed and all functions have to use batadv_orig_ifinfo_free_ref. Fixes: 7351a482 ("batman-adv: split out router from orig_node") Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 44e8e7e9 ] The batadv_nc_node_free_ref function uses call_rcu to delay the free of the batadv_nc_node object until no (already started) rcu_read_lock is enabled anymore. This makes sure that no context is still trying to access the object which should be removed. But batadv_nc_node also contains a reference to orig_node which must be removed. The reference drop of orig_node was done in the call_rcu function batadv_nc_node_free_rcu but should actually be done in the batadv_nc_node_release function to avoid nested call_rcus. This is important because rcu_barrier (e.g. batadv_softif_free or batadv_exit) will not detect the inner call_rcu as relevant for its execution. Otherwise this barrier will most likely be inserted in the queue before the callback of the first call_rcu was executed. The caller of rcu_barrier will therefore continue to run before the inner call_rcu callback finished. Fixes: d56b1705 ("batman-adv: network coding - detect coding nodes and remove these after timeout") Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 63b39927 ] The batadv_claim_free_ref function uses call_rcu to delay the free of the batadv_bla_claim object until no (already started) rcu_read_lock is enabled anymore. This makes sure that no context is still trying to access the object which should be removed. But batadv_bla_claim also contains a reference to backbone_gw which must be removed. The reference drop of backbone_gw was done in the call_rcu function batadv_claim_free_rcu but should actually be done in the batadv_claim_release function to avoid nested call_rcus. This is important because rcu_barrier (e.g. batadv_softif_free or batadv_exit) will not detect the inner call_rcu as relevant for its execution. Otherwise this barrier will most likely be inserted in the queue before the callback of the first call_rcu was executed. The caller of rcu_barrier will therefore continue to run before the inner call_rcu callback finished. Fixes: 23721387 ("batman-adv: add basic bridge loop avoidance code") Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit c6894dec ] After promisc mode management was introduced a bridge device could do dev_set_promiscuity from its ndo_change_rx_flags() callback which in turn can be called after the bridge's addr_list_lock has been taken (e.g. by dev_uc_add). This causes a false positive lockdep splat because the port interfaces' addr_list_lock is taken when br_manage_promisc() runs after the bridge's addr list lock was already taken. To remove the false positive introduce a custom bridge addr_list_lock class and set it on bridge init. A simple way to reproduce this is with the following: $ brctl addbr br0 $ ip l add l br0 br0.100 type vlan id 100 $ ip l set br0 up $ ip l set br0.100 up $ echo 1 > /sys/class/net/br0/bridge/vlan_filtering $ brctl addif br0 eth0 Splat: [ 43.684325] ============================================= [ 43.684485] [ INFO: possible recursive locking detected ] [ 43.684636] 4.4.0-rc8+ #54 Not tainted [ 43.684755] --------------------------------------------- [ 43.684906] brctl/1187 is trying to acquire lock: [ 43.685047] (_xmit_ETHER){+.....}, at: [<ffffffff8150169e>] dev_set_rx_mode+0x1e/0x40 [ 43.685460] but task is already holding lock: [ 43.685618] (_xmit_ETHER){+.....}, at: [<ffffffff815072a7>] dev_uc_add+0x27/0x80 [ 43.686015] other info that might help us debug this: [ 43.686316] Possible unsafe locking scenario: [ 43.686743] CPU0 [ 43.686967] ---- [ 43.687197] lock(_xmit_ETHER); [ 43.687544] lock(_xmit_ETHER); [ 43.687886] *** DEADLOCK *** [ 43.688438] May be due to missing lock nesting notation [ 43.688882] 2 locks held by brctl/1187: [ 43.689134] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81510317>] rtnl_lock+0x17/0x20 [ 43.689852] #1: (_xmit_ETHER){+.....}, at: [<ffffffff815072a7>] dev_uc_add+0x27/0x80 [ 43.690575] stack backtrace: [ 43.690970] CPU: 0 PID: 1187 Comm: brctl Not tainted 4.4.0-rc8+ #54 [ 43.691270] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 [ 43.691770] ffffffff826a25c0 ffff8800369fb8e0 ffffffff81360ceb ffffffff826a25c0 [ 43.692425] ffff8800369fb9b8 ffffffff810d0466 ffff8800369fb968 ffffffff81537139 [ 43.693071] ffff88003a08c880 0000000000000000 00000000ffffffff 0000000002080020 [ 43.693709] Call Trace: [ 43.693931] [<ffffffff81360ceb>] dump_stack+0x4b/0x70 [ 43.694199] [<ffffffff810d0466>] __lock_acquire+0x1e46/0x1e90 [ 43.694483] [<ffffffff81537139>] ? netlink_broadcast_filtered+0x139/0x3e0 [ 43.694789] [<ffffffff8153b5da>] ? nlmsg_notify+0x5a/0xc0 [ 43.695064] [<ffffffff810d10f5>] lock_acquire+0xe5/0x1f0 [ 43.695340] [<ffffffff8150169e>] ? dev_set_rx_mode+0x1e/0x40 [ 43.695623] [<ffffffff815edea5>] _raw_spin_lock_bh+0x45/0x80 [ 43.695901] [<ffffffff8150169e>] ? dev_set_rx_mode+0x1e/0x40 [ 43.696180] [<ffffffff8150169e>] dev_set_rx_mode+0x1e/0x40 [ 43.696460] [<ffffffff8150189c>] dev_set_promiscuity+0x3c/0x50 [ 43.696750] [<ffffffffa0586845>] br_port_set_promisc+0x25/0x50 [bridge] [ 43.697052] [<ffffffffa05869aa>] br_manage_promisc+0x8a/0xe0 [bridge] [ 43.697348] [<ffffffffa05826ee>] br_dev_change_rx_flags+0x1e/0x20 [bridge] [ 43.697655] [<ffffffff81501532>] __dev_set_promiscuity+0x132/0x1f0 [ 43.697943] [<ffffffff81501672>] __dev_set_rx_mode+0x82/0x90 [ 43.698223] [<ffffffff815072de>] dev_uc_add+0x5e/0x80 [ 43.698498] [<ffffffffa05b3c62>] vlan_device_event+0x542/0x650 [8021q] [ 43.698798] [<ffffffff8109886d>] notifier_call_chain+0x5d/0x80 [ 43.699083] [<ffffffff810988b6>] raw_notifier_call_chain+0x16/0x20 [ 43.699374] [<ffffffff814f456e>] call_netdevice_notifiers_info+0x6e/0x80 [ 43.699678] [<ffffffff814f4596>] call_netdevice_notifiers+0x16/0x20 [ 43.699973] [<ffffffffa05872be>] br_add_if+0x47e/0x4c0 [bridge] [ 43.700259] [<ffffffffa058801e>] add_del_if+0x6e/0x80 [bridge] [ 43.700548] [<ffffffffa0588b5f>] br_dev_ioctl+0xaf/0xc0 [bridge] [ 43.700836] [<ffffffff8151a7ac>] dev_ifsioc+0x30c/0x3c0 [ 43.701106] [<ffffffff8151aac9>] dev_ioctl+0xf9/0x6f0 [ 43.701379] [<ffffffff81254345>] ? mntput_no_expire+0x5/0x450 [ 43.701665] [<ffffffff812543ee>] ? mntput_no_expire+0xae/0x450 [ 43.701947] [<ffffffff814d7b02>] sock_do_ioctl+0x42/0x50 [ 43.702219] [<ffffffff814d8175>] sock_ioctl+0x1e5/0x290 [ 43.702500] [<ffffffff81242d0b>] do_vfs_ioctl+0x2cb/0x5c0 [ 43.702771] [<ffffffff81243079>] SyS_ioctl+0x79/0x90 [ 43.703033] [<ffffffff815eebb6>] entry_SYSCALL_64_fastpath+0x16/0x7a CC: Vlad Yasevich <vyasevic@redhat.com> CC: Stephen Hemminger <stephen@networkplumber.org> CC: Bridge list <bridge@lists.linux-foundation.org> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> Fixes: 2796d0c6 ("bridge: Automatically manage port promiscuous mode.") Reported-by:
Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 34ae6a1a ] When a tunnel decapsulates the outer header, it has to comply with RFC 6080 and eventually propagate CE mark into inner header. It turns out IP6_ECN_set_ce() does not correctly update skb->csum for CHECKSUM_COMPLETE packets, triggering infamous "hw csum failure" messages and stack traces. Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Rabin Vincent authored
[ Upstream commit 229394e8 ] On ARM64, a BUG() is triggered in the eBPF JIT if a filter with a constant shift that can't be encoded in the immediate field of the UBFM/SBFM instructions is passed to the JIT. Since these shifts amounts, which are negative or >= regsize, are invalid, reject them in the eBPF verifier and the classic BPF filter checker, for all architectures. Signed-off-by:
Rabin Vincent <rabin@rab.in> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 7aaed57c ] Ivaylo Dimitrov reported a regression caused by commit 7866a621 ("dev: add per net_device packet type chains"). skb->dev becomes NULL and we crash in __netif_receive_skb_core(). Before above commit, different kind of bugs or corruptions could happen without major crash. But the root cause is that phonet_rcv() can queue skb without checking if skb is shared or not. Many thanks to Ivaylo Dimitrov for his help, diagnosis and tests. Reported-by:
Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Tested-by:
-
Karl Heiss authored
[ Upstream commit 03d84a5f ] Commit 1f718f0f ("bonding: populate neighbour's private on enslave") undoes the fix provided by commit c2edacf8 ("bonding / ipv6: no addrconf for slaves separately from master") by effectively setting the slave flag after the slave has been opened. If the slave comes up quickly enough, it will go through the IPv6 addrconf before the slave flag has been set and will get a link local IPv6 address. In order to ensure that addrconf knows to ignore the slave devices on state change, set IFF_SLAVE before dev_open() during bonding enslavement. Fixes: 1f718f0f ("bonding: populate neighbour's private on enslave") Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 9207f9d4 ] Skb_gso_segment() uses skb control block during segmentation. This patch adds 32-bytes room for previous control block which will be copied into all resulting segments. This patch fixes kernel crash during fragmenting forwarded packets. Fragmentation requires valid IP CB in skb for clearing ip options. Also patch removes custom save/restore in ovs code, now it's redundant. Signed-off-by:
Konstantin Khlebnikov <koct9i@gmail.com> Link: http://lkml.kernel.org/r/CALYGNiP-0MZ-FExV2HutTvE9U-QQtkKSoE--KN=JQE5STYsjAA@mail.gmail.comSigned-off-by:
-
Michal Kubeček authored
[ Upstream commit 40ba3302 ] Commit acf8dd0a ("udp: only allow UFO for packets from SOCK_DGRAM sockets") disallows UFO for packets sent from raw sockets. We need to do the same also for SOCK_DGRAM sockets with SO_NO_CHECK options, even if for a bit different reason: while such socket would override the CHECKSUM_PARTIAL set by ip_ufo_append_data(), gso_size is still set and bad offloading flags warning is triggered in __skb_gso_segment(). In the IPv6 case, SO_NO_CHECK option is ignored but we need to disallow UFO for packets sent by sockets with UDP_NO_CHECK6_TX option. Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Tested-by:
Shannon Nelson <shannon.nelson@intel.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Neal Cardwell authored
[ Upstream commit 83d15e70 ] For tcp_yeah, use an ssthresh floor of 2, the same floor used by Reno and CUBIC, per RFC 5681 (equation 4). tcp_yeah_ssthresh() was sometimes returning a 0 or negative ssthresh value if the intended reduction is as big or bigger than the current cwnd. Congestion control modules should never return a zero or negative ssthresh. A zero ssthresh generally results in a zero cwnd, causing the connection to stall. A negative ssthresh value will be interpreted as a u32 and will set a target cwnd for PRR near 4 billion. Oleksandr Natalenko reported that a system using tcp_yeah with ECN could see a warning about a prior_cwnd of 0 in tcp_cwnd_reduction(). Testing verified that this was due to tcp_yeah_ssthresh() misbehaving in this way. Reported-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 320f1a4a ] proc_dostring() needs an initialized destination string, while the one provided in proc_sctp_do_hmac_alg() contains stack garbage. Thus, writing to cookie_hmac_alg would strlen() that garbage and end up accessing invalid memory. Fixes: 3c68198e ("sctp: Make hmac algorithm selection for cookie generation dynamic") Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit 07b9b37c ] When a vxlan interface is created, the driver checks that there is not another vxlan interface with the same properties. To do this, it checks the existing vxlan udp socket. Since commit 1c51a915, the creation of the vxlan socket is done only when the interface is set up, thus it breaks that test. Example: $ ip l a vxlan10 type vxlan id 10 group 239.0.0.10 dev eth0 dstport 0 $ ip l a vxlan11 type vxlan id 10 group 239.0.0.10 dev eth0 dstport 0 $ ip -br l | grep vxlan vxlan10 DOWN f2:55:1c:6a:fb:00 <BROADCAST,MULTICAST> vxlan11 DOWN 7a:cb:b9:38:59:0d <BROADCAST,MULTICAST> Instead of checking sockets, let's loop over the vxlan iface list. Fixes: 1c51a915 ("vxlan: fix race caused by dropping rtnl_unlock") Reported-by:
Thomas Faivre <thomas.faivre@6wind.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit ff621985 ] [I stole this patch from Eric Biederman. He wrote:] > There is no defined mechanism to pass network namespace information > into /sbin/bridge-stp therefore don't even try to invoke it except > for bridge devices in the initial network namespace. > > It is possible for unprivileged users to cause /sbin/bridge-stp to be > invoked for any network device name which if /sbin/bridge-stp does not > guard against unreasonable arguments or being invoked twice on the > same network device could cause problems. [Hannes: changed patch using netns_eq] Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
willy tarreau authored
[ Upstream commit 712f4aad ] It is possible for a process to allocate and accumulate far more FDs than the process' limit by sending them over a unix socket then closing them to keep the process' fd count low. This change addresses this problem by keeping track of the number of FDs in flight per user and preventing non-privileged processes from having more FDs in flight than their configured FD limit. Reported-by: socketpair@gmail.com Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Mitigates: CVE-2013-4312 (Linux 2.0+) Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Acked-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 55285bf0 ] Dmitry reports memleak with syskaller program. Problem is that connector bumps skb usecount but might not invoke callback. So move skb_get to where we invoke the callback. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Xin Long authored
[ Upstream commit 068d8bd3 ] In sctp_close, sctp_make_abort_user may return NULL because of memory allocation failure. If this happens, it will bypass any state change and never free the assoc. The assoc has no chance to be freed and it will be kept in memory with the state it had even after the socket is closed by sctp_close(). So if sctp_make_abort_user fails to allocate memory, we should abort the asoc via sctp_primitive_ABORT as well. Just like the annotation in sctp_sf_cookie_wait_prm_abort and sctp_sf_do_9_1_prm_abort said, "Even if we can't send the ABORT due to low memory delete the TCB. This is a departure from our typical NOMEM handling". But then the chunk is NULL (low memory) and the SCTP_CMD_REPLY cmd would dereference the chunk pointer, and system crash. So we should add SCTP_CMD_REPLY cmd only when the chunk is not NULL, just like other places where it adds SCTP_CMD_REPLY cmd. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit 1dfddff5 ] NCM buffer sizes are negotiated with the device independently of the network device MTU. The RX buffers are allocated by the usbnet framework based on the rx_urb_size value set by cdc_ncm. A single RX buffer can hold a number of MTU sized packets. The default usbnet change_mtu ndo only modifies rx_urb_size if it is equal to hard_mtu. And the cdc_ncm driver will set rx_urb_size and hard_mtu independently of each other, based on dwNtbInMaxSize and dwNtbOutMaxSize respectively. It was therefore assumed that usbnet_change_mtu() would never touch rx_urb_size. This failed to consider the case where dwNtbInMaxSize and dwNtbOutMaxSize happens to be equal. Fix by implementing an NCM specific change_mtu ndo, modifying the netdev MTU without touching the buffer size settings. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Vijay Pandurangan authored
[ Upstream commit ce8c839b ] Packets that arrive from real hardware devices have ip_summed == CHECKSUM_UNNECESSARY if the hardware verified the checksums, or CHECKSUM_NONE if the packet is bad or it was unable to verify it. The current version of veth will replace CHECKSUM_NONE with CHECKSUM_UNNECESSARY, which causes corrupt packets routed from hardware to a veth device to be delivered to the application. This caused applications at Twitter to receive corrupt data when network hardware was corrupting packets. We believe this was added as an optimization to skip computing and verifying checksums for communication between containers. However, locally generated packets have ip_summed == CHECKSUM_PARTIAL, so the code as written does nothing for them. As far as we can tell, after removing this code, these packets are transmitted from one stack to another unmodified (tcpdump shows invalid checksums on both sides, as expected), and they are delivered correctly to applications. We didn’t test every possible network configuration, but we tried a few common ones such as bridging containers, using NAT between the host and a container, and routing from hardware devices to containers. We have effectively deployed this in production at Twitter (by disabling RX checksum offloading on veth devices). This code dates back to the first version of the driver, commit <e314dbdc> ("[NET]: Virtual ethernet device driver"), so I suspect this bug occurred mostly because the driver API has evolved significantly since then. Commit <0b796750> ("net/veth: Fix packet checksumming") (in December 2010) fixed this for packets that get created locally and sent to hardware devices, by not changing CHECKSUM_PARTIAL. However, the same issue still occurs for packets coming in from hardware devices. Co-authored-by:
Evan Jones <ej@evanjones.ca> Signed-off-by:
Vijay Pandurangan <vijayp@vijayp.ca> Acked-by:
Cong Wang <cwang@twopensource.com> Signed-off-by:
-
Moni Shoua authored
commit f25bf197 upstream. The macro mlx4_foreach_non_ib_transport_port() is not used anywhere. Remove it. Fixes: aa9a2d51 ("mlx4: Activate RoCE/SRIOV") Signed-off-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Matan Barak authored
commit 4e408167 upstream. Hop limit value wasn't copied from attributes when ah was created. This may influence packets for unconnected services to get dropped in routers when endpoints are not in the same subnet. Fixes: fa417f7b ("IB/mlx4: Add support for IBoE") Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
-
Chuanxiao Dong authored
commit 0036e746 upstream. Correct the wrong voltage value shown in debugfs for mmc/sd/sdio. Signed-off-by:
Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by:
Pawel Wodkowski <pawelx.wodkowski@intel.com> Fixes: 42cd95a0 ("mmc: core: debugfs: Add signal_voltage to ios dump") Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Geert Uytterhoeven authored
commit c61f30a2 upstream. On r8a7740/armadillo, actual clock rates are ca. 4% lower than reported by /sys/kernel/debug/clk/clk_summary. Correct the extal1 frequency from 25 MHz to 24 MHz to fix this. This matches the Armadillo-800 EVA Product Manual, which claims the main crystal runs at 24 MHz, and the old legacy/reference board code. Fixes: 25aa7ba3 ("ARM: shmobile: armadillo800eva: Sync DTS") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Aaron Conole authored
commit fe22cd9b upstream. Currently, pr_debug and pr_devel will not elide function call arguments appearing in calls to the no_printk for these macros. This is because all side effects must be honored before proceeding to the 0-value assignment in no_printk. The behavior is contrary to documentation found in the CodingStyle and the header file where these functions are declared. This patch corrects that behavior by shunting out the call to no_printk completely. The format string is still checked by gcc for correctness, but no code seems to be emitted in common cases. [akpm@linux-foundation.org: remove braces, per Joe] Fixes: 5264f2f7 ("include/linux/printk.h: use and neaten no_printk") Signed-off-by:
Aaron Conole <aconole@redhat.com> Reported-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 546bed63 upstream. I managed to trigger this: | INFO: trying to register non-static key. | the code is fine but needs lockdep annotation. | turning off the locking correctness validator. | CPU: 1 PID: 781 Comm: systemd-gpt-aut Not tainted 4.4.0-rt2+ #14 | Hardware name: ARM-Versatile Express | [<80307cec>] (dump_stack) | [<80070e98>] (__lock_acquire) | [<8007184c>] (lock_acquire) | [<80287800>] (btrfs_ioctl) | [<8012a8d4>] (do_vfs_ioctl) | [<8012ac14>] (SyS_ioctl) so I think that btrfs_device_data_ordered_init() is not invoked behind a macro somewhere. Fixes: 7cc8e58d ("Btrfs: fix unprotected device's variants on 32bits machine") Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Dan Carpenter authored
commit 0dc924c5 upstream. If we return 1 here, then the caller treats it as an error and returns -EINVAL. It causes a static checker warning to treat positive returns as an error. Fixes: 1aba86d6 ('Btrfs: fix easily get into ENOSPC in mixed case') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Christoph Lameter authored
commit 0eb77e98 upstream. Currently the vmstat updater is not deferrable as a result of commit ba4877b9 ("vmstat: do not use deferrable delayed work for vmstat_update"). This in turn can cause multiple interruptions of the applications because the vmstat updater may run at Make vmstate_update deferrable again and provide a function that folds the differentials when the processor is going to idle mode thus addressing the issue of the above commit in a clean way. Note that the shepherd thread will continue scanning the differentials from another processor and will reenable the vmstat workers if it detects any changes. Fixes: ba4877b9 ("vmstat: do not use deferrable delayed work for vmstat_update") Signed-off-by:
Christoph Lameter <cl@linux.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
-
